Monday, October 14, 2019

Family Time

Squeezing in some time to do review work, but that's about it right now.
I am not real stoked on 2019, I'll tell y'all that right now. This year is going to go down as one of the most down years I've had both personally and professionally in a long time. But that will all come out later. I can't even talk about some of the stuff that is going on now.

Anyway, I wanted to say that several of you must be sensing this because I've been getting a decent amount of "Is everything okay?" messages of late. To you who have reached out. Thank you. It means a lot. But again- I am okay- it's just that several situations suck right now, and getting through this will see me doing better and being stronger. That's what I believe.

Anyway, one of the things I've had to deal with is Mrs.Guitar Ted and her knee issue. She developed pain and a "catch" in her right knee over the Summer which got progressively worse and then we decided it was time to get something done about it. Surgery to scope out what was going on was required, I think they cleaned up a tear in a ligament, (we get the full report Tuesday), and she's been laid up since Friday now. This precipitated my missing the unPAved event in Pennsylvania over the weekend, and I've been real busy doing the job of two parents since then.

So, I've had to stick close to help my wife if she needed anything. That meant I spent a lot of time cleaning the shop. Which, by the way, has been neglected for far too long anyway. So, that was a good thing. I also got my drop bar Badger back in the game, re-upped sealant on the "Orange Crush" BMC, and worked on the Noble Bikes GX5, which had developed a creaking noise.

The creaking wasn't that sort that I associate with a bottom bracket. But it was higher pitched in frequency, which lead me to think pedals, chain ring bolts, or something like that. So, I removed the crank set, a SRAM Force 1X, and checked the bolts. two were loose. So.......hopefully I put the thing back together and rode it. Still had the same creak, but quieter. Hmm..... I did clean the cranks up a bit. I don't know if my cleaning solution got into the interface of aluminum spider and carbon arm, quieting down a creak? Maybe.

At least Noble Bikes used the Wheels MFG Thread Together BB
I still do not think it is the bottom bracket since Noble Bikes had the good sense not to use standard Press Fit plastic crap for cups in a carbon frame. Nope! They used the Wheels MFG Thread Together unit, which I have installed in a few bikes at work. They seemed to quiet the bikes I put them in down quite a lot, and I was happy to see Noble using this component.

I still might remove it and clean everything up just because. It certainly wouldn't hurt. Besides......something is happening soon that will require it anyway. Stay tuned....... I am pretty stoked to have this development happening, and sooner than later I can talk about that. (So, 2019 isn't all bad!) 

So, yeah...... No big bicycle outings for me this past weekend, and probably not for several days yet. Mrs. Guitar Ted is dealing with a fair bit of pain, so far, but the hope is she'll be back going again in a couple weeks or so. In the meantime, family is priority number one here and it has been all hands on deck with me and the two kids pitching in. Oh! By the way, pardon me while I go check on the laundry...........I'll be back tomorrow.

2 comments:

FarleyBob said...

Healing thoughts to the Mrs. Looking forward to some better fall weather so we can all get some good rides in! Thanks for all you do! Love reading your page every morning!

Rydn9ers said...

Sorry to hear about your 2019 troubles, hopefully 2020 will be a better year for the Guitar family.