Friday News And Views

Me. Twin Six Standard Wool Jersey. Image by Izzy

Wool For Summer: My good friend Dr. Giggles turned me on to how to stay cool in Summer. He said, "Get-cher self a wool jersey, son!" I figured he was mad, or had rolled down too many upstate New York and Vermont hills, or something. But he laid out a very convincing case, and being a member of the Slender Fungus Cycling Association, well.....I took note. 

I got a close out special on a Giro wool jersey, which I employed much of last Summer to great success. Ol' Dr. Giggles wasn't foolin' around. He knew what he was on to. So, I was on the lookout for more "Summer weight" wool jerseys, and I'll tell ya, there are not many. I just wasn't connecting with many of the ones Dr. Giggles was suggesting, and some of the others some were pushing my way didn't really hit me right either. I don't know...... I am a picky son of a gun when it comes to what I wear. Just ask Mrs. Guitar Ted!

So, anyway, I was checking out the Twin Six website one day and hey! I saw this thing called The Standard Wool. I didn't waste any time and ordered one up. Those T-6 guys just make really classy, well fitting stuff, and this was no different. However; they also don't do "mee too" design, so there are a couple of things here that are different. The colored part, (blue in my example here), is actually regular ol' jersey fabric. Which is a different touch, but they took that same idea and used it to not only give color to the three back pockets, but to give those pockets structure. Ever had something heavy-ish in a regular wool jersey pocket before? Well, if you have, you know that whatever it is ends up down around yer butt after a while bouncing around back there. Wool stretches, but the Standard Wool Jersey's pockets do not.

Brilliant!

But there's more! In the image above, you cannot tell, but I am soaking wet from a rain shower I got caught in. Hey, wool keeps you warm when that happens. Pretty awesome. Expensive? Yes. $145.00 expensive, which may scare a lot of folks off, but for how this fabric works in hot weather, it is money well spent for me. Your mileage may vary.

The new Olympus Tough TG-5

Tough Camera:

Most of the ride images and stuff I post on here and RidingGravel.com is all imagery taken with my trusty Olympus Tough TG-3. Well, it hasn't let me down yet, but I may replace it, or more likely, add something else to the camera pool. I saw that Olympus just released a Tough TG-5.

Now, I am not one to just get something because it is the next gen thing. You might have noticed I didn't mention the Tough TG-4. It was a minor change from what I had, and I did not see the value in "upgrading", if that even was an upgrade. However; there are some cool features that this TG-5 has that have given me something to chew on.

Basically, the TG-5 is somewhat similar to what I have. However; it does support RAW files, (which I haven't ever used, but probably should), and from my standpoint, better control layout and ergonomics. The TG-3 is a slippery little devil, and there isn't a lot of purchase on the camera body, which gets a little dicey while riding. (Yes.....I shoot a ton of my images while moving. So, sue me. ) The TG-5 has improved grip areas and the control dials are redesigned as well. This may be something that allows me to zoom in with one hand. That would be nice. They also redesigned the mode dial surround so that it doesn't get knocked out of the setting you select easily, which the TG-3 is really prone to do.

The accessory items available for this camera also look a bit more interesting and refined than they have offered in the past. That is a bit enticing, especially the zoom lens, so I may have to seriously consider that as well. But the main things they kept the same were good things. The "tough" features are all the same. Dust proof, freeze proof, shock resistant, and waterproof. All things I insist on for my carry-along camera on my rides. I don't want to baby sit an expensive camera while I am out riding.

It's $450.00 though, so I won't be just grabbing one right off. I need to assess my needs here, and I do have a functioning TG-3, so it isn't like I have to get a camera. But for some of the features this new one has, and the nicer video spec, I can see where it might prove to be a good upgrade, if I use it for video and RAW files, etc.

 GTDRI UPDATE:

Thanks for the feedback, and due to receiving that, I have come to some decisions on the ride.

First- We will start and end at Broad Street Brewing Company in Reinbeck, Iowa. The ride will start at 6:00am.

Second: We will be flying by the seat of our pants if it rains or is wetter than a Level B might allow us to do. We may truncate the route, or .......who knows? If it gets weird, be prepared to roll with it!

Third: This means that the route will have three possibilities for resupply, bailout, or not. First, at mile 28-ish, we will pass just West of Dysart, Iowa. I figure this will be an optional stop. Then we will be going through Traer Iowa at about mile 50. This will definitely be a stop. Then at about Mile 76 we will pass through Garwin, Iowa, and we will definitely be stopping there, I figure.

The route will be 103.5 miles. I plan on doing a recon, at least partial if not all, this holiday weekend. Stay tuned for a recon report next week sometime.

That's a wrap for this edition of Friday News And Views. Have a great weekend!

Friday News And Views

Me. Twin Six Standard Wool Jersey. Image by Izzy

Wool For Summer: My good friend Dr. Giggles turned me on to how to stay cool in Summer. He said, "Get-cher self a wool jersey, son!" I figured he was mad, or had rolled down too many upstate New York and Vermont hills, or something. But he laid out a very convincing case, and being a member of the Slender Fungus Cycling Association, well.....I took note. 

I got a close out special on a Giro wool jersey, which I employed much of last Summer to great success. Ol' Dr. Giggles wasn't foolin' around. He knew what he was on to. So, I was on the lookout for more "Summer weight" wool jerseys, and I'll tell ya, there are not many. I just wasn't connecting with many of the ones Dr. Giggles was suggesting, and some of the others some were pushing my way didn't really hit me right either. I don't know...... I am a picky son of a gun when it comes to what I wear. Just ask Mrs. Guitar Ted!

So, anyway, I was checking out the Twin Six website one day and hey! I saw this thing called The Standard Wool. I didn't waste any time and ordered one up. Those T-6 guys just make really classy, well fitting stuff, and this was no different. However; they also don't do "mee too" design, so there are a couple of things here that are different. The colored part, (blue in my example here), is actually regular ol' jersey fabric. Which is a different touch, but they took that same idea and used it to not only give color to the three back pockets, but to give those pockets structure. Ever had something heavy-ish in a regular wool jersey pocket before? Well, if you have, you know that whatever it is ends up down around yer butt after a while bouncing around back there. Wool stretches, but the Standard Wool Jersey's pockets do not.

Brilliant!

But there's more! In the image above, you cannot tell, but I am soaking wet from a rain shower I got caught in. Hey, wool keeps you warm when that happens. Pretty awesome. Expensive? Yes. $145.00 expensive, which may scare a lot of folks off, but for how this fabric works in hot weather, it is money well spent for me. Your mileage may vary.

The new Olympus Tough TG-5

Tough Camera:

Most of the ride images and stuff I post on here and RidingGravel.com is all imagery taken with my trusty Olympus Tough TG-3. Well, it hasn't let me down yet, but I may replace it, or more likely, add something else to the camera pool. I saw that Olympus just released a Tough TG-5.

Now, I am not one to just get something because it is the next gen thing. You might have noticed I didn't mention the Tough TG-4. It was a minor change from what I had, and I did not see the value in "upgrading", if that even was an upgrade. However; there are some cool features that this TG-5 has that have given me something to chew on.

Basically, the TG-5 is somewhat similar to what I have. However; it does support RAW files, (which I haven't ever used, but probably should), and from my standpoint, better control layout and ergonomics. The TG-3 is a slippery little devil, and there isn't a lot of purchase on the camera body, which gets a little dicey while riding. (Yes.....I shoot a ton of my images while moving. So, sue me. ) The TG-5 has improved grip areas and the control dials are redesigned as well. This may be something that allows me to zoom in with one hand. That would be nice. They also redesigned the mode dial surround so that it doesn't get knocked out of the setting you select easily, which the TG-3 is really prone to do.

The accessory items available for this camera also look a bit more interesting and refined than they have offered in the past. That is a bit enticing, especially the zoom lens, so I may have to seriously consider that as well. But the main things they kept the same were good things. The "tough" features are all the same. Dust proof, freeze proof, shock resistant, and waterproof. All things I insist on for my carry-along camera on my rides. I don't want to baby sit an expensive camera while I am out riding.

It's $450.00 though, so I won't be just grabbing one right off. I need to assess my needs here, and I do have a functioning TG-3, so it isn't like I have to get a camera. But for some of the features this new one has, and the nicer video spec, I can see where it might prove to be a good upgrade, if I use it for video and RAW files, etc.

 GTDRI UPDATE:

Thanks for the feedback, and due to receiving that, I have come to some decisions on the ride.

First- We will start and end at Broad Street Brewing Company in Reinbeck, Iowa. The ride will start at 6:00am.

Second: We will be flying by the seat of our pants if it rains or is wetter than a Level B might allow us to do. We may truncate the route, or .......who knows? If it gets weird, be prepared to roll with it!

Third: This means that the route will have three possibilities for resupply, bailout, or not. First, at mile 28-ish, we will pass just West of Dysart, Iowa. I figure this will be an optional stop. Then we will be going through Traer Iowa at about mile 50. This will definitely be a stop. Then at about Mile 76 we will pass through Garwin, Iowa, and we will definitely be stopping there, I figure.

The route will be 103.5 miles. I plan on doing a recon, at least partial if not all, this holiday weekend. Stay tuned for a recon report next week sometime.

That's a wrap for this edition of Friday News And Views. Have a great weekend!

Wednesday Blues

The view from the front porch on Wednesday evening.

 Wednesdays.... Lately they have been quite the bummer. For the last three weeks in a row it has been stormy and caused me to miss riding, except for last week when I got caught in the rain.

Well, when it rains and storms, then you cannot bicycle safely in the country. So what do you do? You organize, clean, maintain, write stuff, and start new projects. Well......maybe you don't write, but you get the picture. I did a lot of stuff I would have put off had I not been sequestered by imminent danger of lightning or tornado action.

Let's see.....

• I routed the Guitar Ted Death Ride Invitational as a ride starting and ending at the Broad Street Brewing Company.
• I made a tentative GPS file for the course which will be released pending recon.
• I turned around the Fargo post Kansas thrashing. 
• I updated my Lezyne Super GPS. (YES- a full review is still pending)
• I organized some random tools donated to me because "you're a bicycle guy". 
• I purchased two Bontrager Scandium 24 hole rims for a project I am going to do. (Only a wheel build)
• I took all the random change I found on my dresser and desk, added it to the full piggy bank, and turned it in at the Credit Union. All of $21.15, so not a lot. (The piggy bank was all pennies)

I also cleaned more in the Lab, washed some clothes, answered some e-mails, posted on social media, and surfed the innergoogles because......internet. That's what you do.

Oh.........and I drank a lot of coffee. 

Of course......it barely rained all day. Gah! Dang weathermen and their fear mongering. But then again, there was a lot of severe weather around. Who knows......

All I know is I am about done with Wednesdays like these!

Wednesday Blues

The view from the front porch on Wednesday evening.

 Wednesdays.... Lately they have been quite the bummer. For the last three weeks in a row it has been stormy and caused me to miss riding, except for last week when I got caught in the rain.

Well, when it rains and storms, then you cannot bicycle safely in the country. So what do you do? You organize, clean, maintain, write stuff, and start new projects. Well......maybe you don't write, but you get the picture. I did a lot of stuff I would have put off had I not been sequestered by imminent danger of lightning or tornado action.

Let's see.....

• I routed the Guitar Ted Death Ride Invitational as a ride starting and ending at the Broad Street Brewing Company.
• I made a tentative GPS file for the course which will be released pending recon.
• I turned around the Fargo post Kansas thrashing. 
• I updated my Lezyne Super GPS. (YES- a full review is still pending)
• I organized some random tools donated to me because "you're a bicycle guy". 
• I purchased two Bontrager Scandium 24 hole rims for a project I am going to do. (Only a wheel build)
• I took all the random change I found on my dresser and desk, added it to the full piggy bank, and turned it in at the Credit Union. All of $21.15, so not a lot. (The piggy bank was all pennies)

I also cleaned more in the Lab, washed some clothes, answered some e-mails, posted on social media, and surfed the innergoogles because......internet. That's what you do.

Oh.........and I drank a lot of coffee. 

Of course......it barely rained all day. Gah! Dang weathermen and their fear mongering. But then again, there was a lot of severe weather around. Who knows......

All I know is I am about done with Wednesdays like these!

Guitar Ted Death Ride Invitational: Updates & Important News!!

Yard sale at the 2015 GTDRI

First off, due to a conflict with my another event on my calendar, I have to push back the GTDRI to the first weekend of August, Saturday, August 5th.

Okay, now with that solid piece of info nailed down, I have some flexibility in some other areas. This post is for informing anyone that is interested in joining me on this no-drop, casual pace ride on gravel. I have a few ideas to share today and I am looking for feedback from interested parties.

The route this year has a theme and that is dirt roads. They call them Level B Maintenance Roads in Iowa, but essentially they are, for the most part, how all roads in Iowa were during the early 1900's. I don't have a total on mileage yet of the dirt, but expect a lot of it. This poses a risk, because, if it rains, we're in for a lot of rerouting. I may even do an alternative, "rain route", in case it does get wet. It also may be possible to do a truncated route as well.

I also wanted to make a stop at the Broad Street Brewing. As of now, I can have that happen at the 3/4's of the route mark, or we can start and stop there. The place opens at 2:00pm on Saturdays. They  do have food there as well, so I can see how a start/finish there makes more sense.

The Guitar Ted Death Ride Invitational is a free, no drop gravel grinder put on by Guitar Ted Productions.

Fine Details: The tentative route is 103 miles. Towns we would start at/pass through are Reinbeck/Traer. We also will be going through Garwin, Iowa, and we will pass right by Dysart, Iowa with an option to stop or go by. The ride would start at 6:00am on Saturday August 5th, 2017. This ride is completely self-supported and YOU ARE RESPONSIBLE FOR YOURSELF at the Guitar Ted Death Ride Invitational. There is no sag and no provided support of any kind. A route map of the final course will be made available before the event. This is a NO DROP RIDE. Casual pace. Stops to gather up stragglers will be made. You should have a bicycle in good running condition and have the necessary tools and supplies to service it in the field in case of minor mechanicals. You should be fairly certain that you can complete a 100 mile bicycle ride in tough terrain in possibly very humid and hot conditions. Cell service will be limited in many locations along the route and emergency services may take a long time to reach you in case of an emergency. (Ask me how I know that!) Be prepared! Be Smart!!

Here then are the options I wanted to put to you and have you comment on, if you care to.

• Start at Traer, making Reinbeck a 3/4's of the way through the route stop,then finish in Traer. 
• Start and finish in Reinbeck at the Broad Street Brewing Company. 
• Have a "rain route" at the ready.
• In case of wet weather or rain during the ride, just route on the fly accordingly. (More adventurous)

Okay, that's what I have so far. Let me know what you think

Guitar Ted Death Ride Invitational: Updates & Important News!!

Yard sale at the 2015 GTDRI

First off, due to a conflict with my another event on my calendar, I have to push back the GTDRI to the first weekend of August, Saturday, August 5th.

Okay, now with that solid piece of info nailed down, I have some flexibility in some other areas. This post is for informing anyone that is interested in joining me on this no-drop, casual pace ride on gravel. I have a few ideas to share today and I am looking for feedback from interested parties.

The route this year has a theme and that is dirt roads. They call them Level B Maintenance Roads in Iowa, but essentially they are, for the most part, how all roads in Iowa were during the early 1900's. I don't have a total on mileage yet of the dirt, but expect a lot of it. This poses a risk, because, if it rains, we're in for a lot of rerouting. I may even do an alternative, "rain route", in case it does get wet. It also may be possible to do a truncated route as well.

I also wanted to make a stop at the Broad Street Brewing. As of now, I can have that happen at the 3/4's of the route mark, or we can start and stop there. The place opens at 2:00pm on Saturdays. They  do have food there as well, so I can see how a start/finish there makes more sense.

The Guitar Ted Death Ride Invitational is a free, no drop gravel grinder put on by Guitar Ted Productions.

Fine Details: The tentative route is 103 miles. Towns we would start at/pass through are Reinbeck/Traer. We also will be going through Garwin, Iowa, and we will pass right by Dysart, Iowa with an option to stop or go by. The ride would start at 6:00am on Saturday August 5th, 2017. This ride is completely self-supported and YOU ARE RESPONSIBLE FOR YOURSELF at the Guitar Ted Death Ride Invitational. There is no sag and no provided support of any kind. A route map of the final course will be made available before the event. This is a NO DROP RIDE. Casual pace. Stops to gather up stragglers will be made. You should have a bicycle in good running condition and have the necessary tools and supplies to service it in the field in case of minor mechanicals. You should be fairly certain that you can complete a 100 mile bicycle ride in tough terrain in possibly very humid and hot conditions. Cell service will be limited in many locations along the route and emergency services may take a long time to reach you in case of an emergency. (Ask me how I know that!) Be prepared! Be Smart!!

Here then are the options I wanted to put to you and have you comment on, if you care to.

• Start at Traer, making Reinbeck a 3/4's of the way through the route stop,then finish in Traer. 
• Start and finish in Reinbeck at the Broad Street Brewing Company. 
• Have a "rain route" at the ready.
• In case of wet weather or rain during the ride, just route on the fly accordingly. (More adventurous)

Okay, that's what I have so far. Let me know what you think

Simplified Drive Trains Complicated By Proposed New Developments

Getting rid of that front derailleur and adding wide range cassettes has its pitfalls.

Just the other day I mentioned in a post about how I wasn't necessarily a fan of the 1X drive train craze sweeping the mountain bike world of late. I do really like the idea for fat bikes, but there are issues when you try to make the chain do the physical gymnastics required of it to make a 1X drive train work. Especially if you want a wide range of gears.

Riders are finding this out now. New 2017 bikes with different lower end spec have been plagued by issues such as dropped chains, chains that derail when pedaled backward, and by noises and excessive wear. SRAM and Shimano have responded by making further tweaks to tooth profiles on chain rings and cassette cogs to allow chains to engage and release the teeth more efficiently, especially when coming off those big, 42T-50T rear cogs.

Basically, what has happened is that we've removed our front shifting issues and found them again on the back end.

Think about it- Big chain rings up front didn't want to release the chain or pick it up easily because there was so much more chain to teeth contact by virtue of the chain ring sizes. Now those sized cogs and bigger are found out back on many mountain bikes and the chain release issues have cropped up again.

This Shimano patent applied for design shows an axially movable chain line. Courtesy of Cycling Industry News.

Now Shimano and SRAM are applying for patents to address this issue. The ideas are different, but the results sought for are the same. Shimano suggests a bottom bracket spindle that telescopes in and out to straighten chain line, which would make the drive train more efficient and discourage chain drop. This solution does what we used to do with our triple chain rings and front derailleurs- straighten our chain lines out. Obviously it would make sense that Shimano would require the bottom bracket to telescope in a way somehow synchronized to the shifter. Di2 would make sense here.

It complicates the bottom bracket, for sure, and it puts a mechanism in a place where moisture could wreak havoc on the device. However; if anyone can engineer this to work right, I would place my bets on Shimano. Still, I am not convinced something this complex can survive the rigors of mountain biking. But we may or may not see............

SRAM's solution also alters the chain line but does it by a floating chain ring mount. Image courtesy of Cycling Industry News

 SRAM seems to have taken a different approach which seems to involve canting the chain ring in the direction of how the chain wants to flow back toward the cassette, depending upon the gear chosen. This option seems to not be tied directly to how the shifter operates and would appear to be simpler and effective. However, any time I've seen any chain ring allowed to move, (granted, it wasn't designed to move), it is not a good thing. This solution leaves me with a lot of questions and concerns. Also, the SRAM solution requires a special chain ring carrier, which would suggest that it only would work with removable spider designed cranks, perhaps. More places for creaks to happen, in my opinion, here with this design.

But what really strikes me here, and actually made me laugh out loud when I first saw this, was how all this getting rid of the front derailleur was going to simplify our drive trains. 

Apparently "simple" isn't working out as well as they hoped it would! But making it more complicated is the answer? I don't see this working out well...........

Simplified Drive Trains Complicated By Proposed New Developments

Getting rid of that front derailleur and adding wide range cassettes has its pitfalls.

Just the other day I mentioned in a post about how I wasn't necessarily a fan of the 1X drive train craze sweeping the mountain bike world of late. I do really like the idea for fat bikes, but there are issues when you try to make the chain do the physical gymnastics required of it to make a 1X drive train work. Especially if you want a wide range of gears.

Riders are finding this out now. New 2017 bikes with different lower end spec have been plagued by issues such as dropped chains, chains that derail when pedaled backward, and by noises and excessive wear. SRAM and Shimano have responded by making further tweaks to tooth profiles on chain rings and cassette cogs to allow chains to engage and release the teeth more efficiently, especially when coming off those big, 42T-50T rear cogs.

Basically, what has happened is that we've removed our front shifting issues and found them again on the back end.

Think about it- Big chain rings up front didn't want to release the chain or pick it up easily because there was so much more chain to teeth contact by virtue of the chain ring sizes. Now those sized cogs and bigger are found out back on many mountain bikes and the chain release issues have cropped up again.

This Shimano patent applied for design shows an axially movable chain line. Courtesy of Cycling Industry News.

Now Shimano and SRAM are applying for patents to address this issue. The ideas are different, but the results sought for are the same. Shimano suggests a bottom bracket spindle that telescopes in and out to straighten chain line, which would make the drive train more efficient and discourage chain drop. This solution does what we used to do with our triple chain rings and front derailleurs- straighten our chain lines out. Obviously it would make sense that Shimano would require the bottom bracket to telescope in a way somehow synchronized to the shifter. Di2 would make sense here.

It complicates the bottom bracket, for sure, and it puts a mechanism in a place where moisture could wreak havoc on the device. However; if anyone can engineer this to work right, I would place my bets on Shimano. Still, I am not convinced something this complex can survive the rigors of mountain biking. But we may or may not see............

SRAM's solution also alters the chain line but does it by a floating chain ring mount. Image courtesy of Cycling Industry News

 SRAM seems to have taken a different approach which seems to involve canting the chain ring in the direction of how the chain wants to flow back toward the cassette, depending upon the gear chosen. This option seems to not be tied directly to how the shifter operates and would appear to be simpler and effective. However, any time I've seen any chain ring allowed to move, (granted, it wasn't designed to move), it is not a good thing. This solution leaves me with a lot of questions and concerns. Also, the SRAM solution requires a special chain ring carrier, which would suggest that it only would work with removable spider designed cranks, perhaps. More places for creaks to happen, in my opinion, here with this design.

But what really strikes me here, and actually made me laugh out loud when I first saw this, was how all this getting rid of the front derailleur was going to simplify our drive trains. 

Apparently "simple" isn't working out as well as they hoped it would! But making it more complicated is the answer? I don't see this working out well...........

Reflections On A Big Weekend In Cycling

Sarah Cooper finishing Trans Iowa v12 as Ari Andonopoulous looks on.

The month of June seems to have become the pinnacle of cycling, at least to my mind. Obviously, here in Iowa we all were rooting for Sarah Cooper, a RAAM rookie and an incredibly talented and focused athlete. This weekend she attained not only the goal of finishing this tough, 3,000 plus mile, cross country event, but she was the first placed female finisher, and led the event in that category, if not the entire way, for the majority of it. Not only this, but amongst solo competitors, she was ninth overall, (by my observation and according to results I have found.)

So,that's a big deal. I want to say "Congratulations Sarah!", and also to the team that supported her, many of whom I know. Good job!

But there were a lot of other things going on. All just over the weekend. I know folks that garnered "National Championship" jerseys in the first ever Gravel Nationals, just held in Lawrence, Kansas. I know a guy that finished the Lutsen 99'er over the weekend, and I know some folks that are on the Tour Divide route, another grueling event, which has many coming close to finishing there.

I'm probably missing a few things.....

To all of you, a hearty congratulations on your accomplishments. I guess as I reflect on the enormity of Sarah Cooper's accomplishments, and of those of several other folks, it becomes hard to process it all. As I think about this, I can only offer a few observations......

• The "watching of dots" and the comments posted on social media make me think that this cycling thing has the power to bring folks together. Actually, it isn't necessarily the sport of cycling. We, as human beings, seem to have the capabilities, at times, to be very supportive, encouraging, empathetic, and positive. Cycling can be a catalyst for this. Big challenges seem to pull us together, even if we are sitting on our butts in office cubicles or whatever. The protagonists are the rallying point, but there is something worth latching on to here that we all can draw off of, whether we are sportsmen or not.
• There is also a perceived negative effect by some onlookers. The "heroics" of others can seem to make us seem weak, small, and not very good. I hope that if you are feeling this that you understand that these folks that pull off these challenges are, for the most part, just like you. They have their bouts of self-loathing, doubt, and are prone to depression at times as well. They in no way want what they do to have this negative effect. Talk to someone. Don't let it fester......
• You don't have to "go big" to get the same feelings and respect from others. I read about an event over the weekend that featured 100 miles of gravel. There were people commenting about how their finish was sweet and very memorable due to some folks being there at the finish to cheer them in. The event doesn't even have to be that big to get the same feelings. I know that there are events, like the Dirty Kanza 200, that seem to try to place a monopoly on having that vibe, that, "find your limits" thing. But don't you go thinking that they have a lock on that for a minute. The point is, go take on a challenge, and no matter how big or small it is, you will grow. You may not even finish it and it may be a life changing event for you. This could be just riding, or walking, or running, or whatever for any distance. Don't measure your challenge by the Tour Divide or RAAM. Your challenge, whatever it is, is just as big a deal as those events are. 

Just a few things I felt about all of the weekend's goings on. Thanks for reading............

Reflections On A Big Weekend In Cycling

Sarah Cooper finishing Trans Iowa v12 as Ari Andonopoulous looks on.

The month of June seems to have become the pinnacle of cycling, at least to my mind. Obviously, here in Iowa we all were rooting for Sarah Cooper, a RAAM rookie and an incredibly talented and focused athlete. This weekend she attained not only the goal of finishing this tough, 3,000 plus mile, cross country event, but she was the first placed female finisher, and led the event in that category, if not the entire way, for the majority of it. Not only this, but amongst solo competitors, she was ninth overall, (by my observation and according to results I have found.)

So,that's a big deal. I want to say "Congratulations Sarah!", and also to the team that supported her, many of whom I know. Good job!

But there were a lot of other things going on. All just over the weekend. I know folks that garnered "National Championship" jerseys in the first ever Gravel Nationals, just held in Lawrence, Kansas. I know a guy that finished the Lutsen 99'er over the weekend, and I know some folks that are on the Tour Divide route, another grueling event, which has many coming close to finishing there.

I'm probably missing a few things.....

To all of you, a hearty congratulations on your accomplishments. I guess as I reflect on the enormity of Sarah Cooper's accomplishments, and of those of several other folks, it becomes hard to process it all. As I think about this, I can only offer a few observations......

• The "watching of dots" and the comments posted on social media make me think that this cycling thing has the power to bring folks together. Actually, it isn't necessarily the sport of cycling. We, as human beings, seem to have the capabilities, at times, to be very supportive, encouraging, empathetic, and positive. Cycling can be a catalyst for this. Big challenges seem to pull us together, even if we are sitting on our butts in office cubicles or whatever. The protagonists are the rallying point, but there is something worth latching on to here that we all can draw off of, whether we are sportsmen or not.
• There is also a perceived negative effect by some onlookers. The "heroics" of others can seem to make us seem weak, small, and not very good. I hope that if you are feeling this that you understand that these folks that pull off these challenges are, for the most part, just like you. They have their bouts of self-loathing, doubt, and are prone to depression at times as well. They in no way want what they do to have this negative effect. Talk to someone. Don't let it fester......
• You don't have to "go big" to get the same feelings and respect from others. I read about an event over the weekend that featured 100 miles of gravel. There were people commenting about how their finish was sweet and very memorable due to some folks being there at the finish to cheer them in. The event doesn't even have to be that big to get the same feelings. I know that there are events, like the Dirty Kanza 200, that seem to try to place a monopoly on having that vibe, that, "find your limits" thing. But don't you go thinking that they have a lock on that for a minute. The point is, go take on a challenge, and no matter how big or small it is, you will grow. You may not even finish it and it may be a life changing event for you. This could be just riding, or walking, or running, or whatever for any distance. Don't measure your challenge by the Tour Divide or RAAM. Your challenge, whatever it is, is just as big a deal as those events are. 

Just a few things I felt about all of the weekend's goings on. Thanks for reading............

Minus Ten Review- 25

Vendor bikes at the Big Wheeled Ballyhoo demo in Decorah, Iowa

Ten years ago this week I was involved in this festival/demo in Decorah Iowa that I wanted to call "The Midwest 29"er Meetup". In fact, I didn't want it to be anything else but an actual meeting of riders. All I wanted to have happen was to have riders have fun and ride bikes.

Instead, I let the guy who owned Twenty Nine Inches at that time talk me in to something else.

Boy, do I ever regret letting that happen. 

Which taught me a lesson: Don't ever let anyone talk you out of your dream or vision of how you see something going if you really believe in it. It will never be a success if you let that happen.

So it was to be with this deal called the "Big Wheeled Ballyhoo". It never really worked out, and I never really felt good about it. We had to cancel it due to weather in 2008 and in 2009 I gave it one more shot with help from good friends, and in an effort to start to turn it back in to the thing I thought it should be. Well, it snowed 8 or 9 inches, or some ridiculous thing, on that one. Plus, it happened that I couldn't even be there due to a member of the family having a health serious issue, which required me to stay home.

In short, The Big Wheeled Ballyhoo was doomed. I just wasn't meant to be, in my opinion.

Brandon, a mechanic for Milltown Cycles, riding Ben Witt's 36"er.

Oh, there were some good things that happened at that first Ballyhoo. We got  to hang out with some great folks. There were some cool bikes to check out including the first ever, (I might be mistaken here), ride by anyone of a G2 geometry Fisher Paragon with the brand new Fox fork for 29"ers. If we weren't the first, we were close to it.

Of course, there were the previously mentioned lessons learned. Invaluable to me going forward in regard to putting on Trans Iowa. At this point ten years ago, Trans Iowa was a dead idea to me, but when it was resurrected not more than a couple of months later, the Ballyhoo experiences were what I leaned on. Those experiences steeled my desire to keep Trans Iowa true to its roots and to not let anybody talk me out of that.

I also learned who some of my friends were and who supported what I believed in and who did not. Character was shown and taken note of. The entirety of the Ballyhoo experience was good in that I made some good friends, learned who I could trust, and left the rest behind. I do not regret ever doing it, but it was not a pleasant experience overall.

Sometimes learning things and growing up is hard.

Minus Ten Review- 25

Vendor bikes at the Big Wheeled Ballyhoo demo in Decorah, Iowa

Ten years ago this week I was involved in this festival/demo in Decorah Iowa that I wanted to call "The Midwest 29"er Meetup". In fact, I didn't want it to be anything else but an actual meeting of riders. All I wanted to have happen was to have riders have fun and ride bikes.

Instead, I let the guy who owned Twenty Nine Inches at that time talk me in to something else.

Boy, do I ever regret letting that happen. 

Which taught me a lesson: Don't ever let anyone talk you out of your dream or vision of how you see something going if you really believe in it. It will never be a success if you let that happen.

So it was to be with this deal called the "Big Wheeled Ballyhoo". It never really worked out, and I never really felt good about it. We had to cancel it due to weather in 2008 and in 2009 I gave it one more shot with help from good friends, and in an effort to start to turn it back in to the thing I thought it should be. Well, it snowed 8 or 9 inches, or some ridiculous thing, on that one. Plus, it happened that I couldn't even be there due to a member of the family having a health serious issue, which required me to stay home.

In short, The Big Wheeled Ballyhoo was doomed. I just wasn't meant to be, in my opinion.

Brandon, a mechanic for Milltown Cycles, riding Ben Witt's 36"er.

Oh, there were some good things that happened at that first Ballyhoo. We got  to hang out with some great folks. There were some cool bikes to check out including the first ever, (I might be mistaken here), ride by anyone of a G2 geometry Fisher Paragon with the brand new Fox fork for 29"ers. If we weren't the first, we were close to it.

Of course, there were the previously mentioned lessons learned. Invaluable to me going forward in regard to putting on Trans Iowa. At this point ten years ago, Trans Iowa was a dead idea to me, but when it was resurrected not more than a couple of months later, the Ballyhoo experiences were what I leaned on. Those experiences steeled my desire to keep Trans Iowa true to its roots and to not let anybody talk me out of that.

I also learned who some of my friends were and who supported what I believed in and who did not. Character was shown and taken note of. The entirety of the Ballyhoo experience was good in that I made some good friends, learned who I could trust, and left the rest behind. I do not regret ever doing it, but it was not a pleasant experience overall.

Sometimes learning things and growing up is hard.

Friday News And Views

Less expensive, 1 X 12, will be seen everywhere

New Bike Season: It is that time of year when new stuff for the new bike year, (2018 in this case), starts to trickle out. We've seen a few things already, like the new Ultegra and Niner's new SIR 9 model. Another recent intro that I haven't mentioned is SRAM's new, more wallet friendly version of 1 X 12 Eagle in the GX level. Said to be a direct competitor to XT, GX Eagle will be seen on a ton of new 2018 bicycles.

SRAM made sure you'll know it is GX Eagle because the new GX crank arms are flat and wide. Perfect for a huge "GX" logo. One of the other GX Eagle components is a grip shifter. I know that seems odd ball to many of you, but to my mind, a grip shift 1X 12 is a perfect fat bike set up. Think gloved hands, cold air, and keeping your digits warm by ganging them together in an overmitt, or under a pogie. Triggers can be a bit much in those situations whereas a grip shifter is much easier to operate under those circumstances.

Of course, the big expense in the flagship Eagle component group is the (almost) one piece, carved out of a block of steel, cassette. GX gets a pinned together set of 12 cogs. I've used a similar 11 speed cassette on my fat bike and it worked fine. So, it isn't marvelously light, but it certainly isn't heavy by any stretch of the imagination.

An entire Eagle GX groupset can be had for under $500.00, so it isn't a bad upgrade for anyone running an 11 speed SRAM 1X group. Again, I'm not necessarily a fan on all fronts. I totally get 1X for fat bikes, due to the nature of how a front derailleur ends up becoming a focal point for muck collection. (I use a fat bike for wet, muddy, slushy excursions.) I don't necessarily agree with 1X from the standpoint of chain efficiency. I still think there are times when a 2X is a better choice. I like Shimano's thinking in this regard.

The Otso Cycles, Lithic brand, "Hiili" model carbon gravel bike fork.

More Clearance:

The move to make a gravel bike, (read "fat road bike") your "One Bike to Rule Them All" bike, lately has spawned all sorts of oddball stuff that no one was dreaming of 5 years ago. In fact, had anyone introduced a 400mm axle to crown fork that fit a 29" X 2.1" tire, they would have been considered nuts. At least there would have been a lot of "WTF" going on.

But then again, maybe there still is a lot of that thought going on! 

Anyway, there it is. Otso Cycles has this very fork. It can be stuffed with all sorts of fat tired, different diameter wheels, and it could be just the thing for cyclo crossers looking for the maximum mud clearing front wheel holding device. That said, I would think a strut would be better then. Probably would look too weird, eh? But then again, there is the Lauf fork......... Who knows?!! 

Okay, so I am older, I like classic parts, and so this fork doesn't bother me so much since that huge arch looks more like a sloping investment cast crown than a uni-crown fork. Uni-crown forks are obviously a very structurally sound way to make a fork out of metal, but carbon is supposed to be able to be formed into certain shapes and retain strength. Why not approximate a sloping crown steel fork in carbon? Now that would keep some folks hair raised, I am sure, but how cool would that be?

Anyway..... My main beef with carbon forks is that they typically are brutal to ride. I sure hope this fork is not one of those forks, if ya know what I mean. Hopefully more like the TRP CX fork I got to try, or the 3T fork I heard was nice. But that isn't all Otso had to tell of......

They now are a component brand to the consumer and industry. They will be selling this fork and a handle bar, and wheels, and fat bike rims under the "Lithic"brand label.

Fatty hasn't been the same since.......

 Guitar Ted Death Ride Invitational News:

I have been pretty quiet about this so far this year, but now it is getting closer and I've got plans to share. The next GTDRI happens on July 29th. (YES, I know that is the last day of RAGBRAI. That's on purpose....) That Saturday we will be going on a "tour of dirt roads" Iowa style in Tama County.

The inspiration for this route is from my friends in the Pirate Cycling League who do their own "Tour Of Dirt Roads". I thought it might be fun to try that up here.

It's a huge risk, because if it rains it will be a re-route fest and it could become a wild, weird day of wandering instead of cruising cool dirt roads, but whatever happens happens. I'm going for it.

So, as of now I am planning on the following for the route:

• Distance- At least 100 miles, but not more than 120.
• Starting Point- Traer Iowa. We will loop back to here to end the ride as well.
• Pass Through Towns. (Subject to change) Toledo, Garwin, Reinbeck
• Ride happens rain or shine with or without anyone showing up.
• This is a free to attend ride. Anyone that thinks they can hack it can show up. 

More soon...... Stay tuned.

Have a great weekend! Ride your bicycles and stay safe!

Friday News And Views

Less expensive, 1 X 12, will be seen everywhere

New Bike Season: It is that time of year when new stuff for the new bike year, (2018 in this case), starts to trickle out. We've seen a few things already, like the new Ultegra and Niner's new SIR 9 model. Another recent intro that I haven't mentioned is SRAM's new, more wallet friendly version of 1 X 12 Eagle in the GX level. Said to be a direct competitor to XT, GX Eagle will be seen on a ton of new 2018 bicycles.

SRAM made sure you'll know it is GX Eagle because the new GX crank arms are flat and wide. Perfect for a huge "GX" logo. One of the other GX Eagle components is a grip shifter. I know that seems odd ball to many of you, but to my mind, a grip shift 1X 12 is a perfect fat bike set up. Think gloved hands, cold air, and keeping your digits warm by ganging them together in an overmitt, or under a pogie. Triggers can be a bit much in those situations whereas a grip shifter is much easier to operate under those circumstances.

Of course, the big expense in the flagship Eagle component group is the (almost) one piece, carved out of a block of steel, cassette. GX gets a pinned together set of 12 cogs. I've used a similar 11 speed cassette on my fat bike and it worked fine. So, it isn't marvelously light, but it certainly isn't heavy by any stretch of the imagination.

An entire Eagle GX groupset can be had for under $500.00, so it isn't a bad upgrade for anyone running an 11 speed SRAM 1X group. Again, I'm not necessarily a fan on all fronts. I totally get 1X for fat bikes, due to the nature of how a front derailleur ends up becoming a focal point for muck collection. (I use a fat bike for wet, muddy, slushy excursions.) I don't necessarily agree with 1X from the standpoint of chain efficiency. I still think there are times when a 2X is a better choice. I like Shimano's thinking in this regard.

The Otso Cycles, Lithic brand, "Hiili" model carbon gravel bike fork.

More Clearance:

The move to make a gravel bike, (read "fat road bike") your "One Bike to Rule Them All" bike, lately has spawned all sorts of oddball stuff that no one was dreaming of 5 years ago. In fact, had anyone introduced a 400mm axle to crown fork that fit a 29" X 2.1" tire, they would have been considered nuts. At least there would have been a lot of "WTF" going on.

But then again, maybe there still is a lot of that thought going on! 

Anyway, there it is. Otso Cycles has this very fork. It can be stuffed with all sorts of fat tired, different diameter wheels, and it could be just the thing for cyclo crossers looking for the maximum mud clearing front wheel holding device. That said, I would think a strut would be better then. Probably would look too weird, eh? But then again, there is the Lauf fork......... Who knows?!! 

Okay, so I am older, I like classic parts, and so this fork doesn't bother me so much since that huge arch looks more like a sloping investment cast crown than a uni-crown fork. Uni-crown forks are obviously a very structurally sound way to make a fork out of metal, but carbon is supposed to be able to be formed into certain shapes and retain strength. Why not approximate a sloping crown steel fork in carbon? Now that would keep some folks hair raised, I am sure, but how cool would that be?

Anyway..... My main beef with carbon forks is that they typically are brutal to ride. I sure hope this fork is not one of those forks, if ya know what I mean. Hopefully more like the TRP CX fork I got to try, or the 3T fork I heard was nice. But that isn't all Otso had to tell of......

They now are a component brand to the consumer and industry. They will be selling this fork and a handle bar, and wheels, and fat bike rims under the "Lithic"brand label.

Fatty hasn't been the same since.......

 Guitar Ted Death Ride Invitational News:

I have been pretty quiet about this so far this year, but now it is getting closer and I've got plans to share. The next GTDRI happens on July 29th. (YES, I know that is the last day of RAGBRAI. That's on purpose....) That Saturday we will be going on a "tour of dirt roads" Iowa style in Tama County.

The inspiration for this route is from my friends in the Pirate Cycling League who do their own "Tour Of Dirt Roads". I thought it might be fun to try that up here.

It's a huge risk, because if it rains it will be a re-route fest and it could become a wild, weird day of wandering instead of cruising cool dirt roads, but whatever happens happens. I'm going for it.

So, as of now I am planning on the following for the route:

• Distance- At least 100 miles, but not more than 120.
• Starting Point- Traer Iowa. We will loop back to here to end the ride as well.
• Pass Through Towns. (Subject to change) Toledo, Garwin, Reinbeck
• Ride happens rain or shine with or without anyone showing up.
• This is a free to attend ride. Anyone that thinks they can hack it can show up. 

More soon...... Stay tuned.

Have a great weekend! Ride your bicycles and stay safe!

Soggy Solstice Ride

I could see the rain coming......

Wednesday. Time to ride. Well.........it would be, if it ever would quit raining on Wednesdays. Last Wednesday I got snookered out of a ride and this one looked to be headed in the same direction. We had a nice thunderstorm roll through in the morning, so I took the time to maintenance the Twin Six Standard Rando and change the elastomers in the Redshift ShockStop stem I am testing on it.

Around lunch time it cleared out and I decided to eat and then I would get out there. Well, about the time I am headed out the door, radar indicated rain all around Waterloo. I went out anyway. Heck, sometimes radar indicates rain and it amounts to nothing. Fake news and all. I wasn't going to miss out on riding.

Things looked wet all around, for sure, but where I was it seemed dry enough. No standing puddles, no spritzing of rain, no immediate threat to me. So, I went onward. Aker Road to Washburn, and around down on Holmes Road to Petrie Road to test the new Resolute's mud clearing capacity. I figured the rain would have made some nice mud for me to get in to.

That would be found out in due time. Right at that moment I had a nasty Southeastern headwind to push against. It was tough sledding heading South. The gravel was wet and actually muddy in some spots here. They must have gotten quite the gully washer that morning. No trouble with fresh gravel, at least there was that. I found plenty of good lines on my way.

Best to heed the sign, but I had testing to do!

Petrie didn't look too bad. I actually made it to the place where the black dirt turned to clay, then all bets were off. The wheels stopped turning and I was obliged to walk after that. You can see the top of the hill in the image here, and that is where I finally could drop the bike and roll it along where there was a line of clover blooming on the left side of the roadway.

Once I reached the grassy margin in the middle I could ride again.

The Resolutes clear mud like a champ, so once I got rolling again I didn't have to stop to scrape mud at all. In fact, after about a half mile of gravel you'd never know that I had been packed up with mud unless you looked at the frame. The tires looked fine.

Heading East was better than going South, but when I turned out on Ansborough, I got the full effects of the tailwind and I was off to the races. The gravel was newer over here, but as long as I was headed North it did not matter. I found it easy to keep hammering.

I went down Washburn Road and back to Aker, then started making my way back toward Waterloo. I was keeping an eye on the sky the entire ride, but it wasn't until I made it back on to the Sergeant Road bike path that I began to think I might end up getting caught in some rain.

It was going to be a close call, but in the end, I decided not to try to outrun this. I know when to make a run for it and this rain cloud wasn't warranting a heavy output. So, I motored onward.

Getting wet on the bike is maybe something a lot of people try to avoid. I guess I'd try to avoid getting into a heavy thunderstorm, but your garden variety shower? Meh..... Not that big of a deal, especially in the Summer. I wasn't too worried, and as it turned out it didn't really start raining on me in earnest until I was about 12 blocks from the house.

It is kind of a weird thing with me and rain. Once it starts raining, and I am riding, I get a boost of energy. Once on a Guitar Ted Death Ride Invitaional it rained on us and I took off up the steep hills of Jasper County like I had a turbo boost. A friend started calling me "Contador" because I was climbing so well. It was just that it was raining. I cannot explain why I am that way.

Well, the rain made me go like a son of a gun and I was home before ya knew it, dripping wet on the front porch. Some "solstice ride"! Usually it is a long day in the saddle where you expect to have to use copious amounts of sun tan lotion. Not dodging rain storms and lightning bolts!

Soggy Solstice Ride

I could see the rain coming......

Wednesday. Time to ride. Well.........it would be, if it ever would quit raining on Wednesdays. Last Wednesday I got snookered out of a ride and this one looked to be headed in the same direction. We had a nice thunderstorm roll through in the morning, so I took the time to maintenance the Twin Six Standard Rando and change the elastomers in the Redshift ShockStop stem I am testing on it.

Around lunch time it cleared out and I decided to eat and then I would get out there. Well, about the time I am headed out the door, radar indicated rain all around Waterloo. I went out anyway. Heck, sometimes radar indicates rain and it amounts to nothing. Fake news and all. I wasn't going to miss out on riding.

Things looked wet all around, for sure, but where I was it seemed dry enough. No standing puddles, no spritzing of rain, no immediate threat to me. So, I went onward. Aker Road to Washburn, and around down on Holmes Road to Petrie Road to test the new Resolute's mud clearing capacity. I figured the rain would have made some nice mud for me to get in to.

That would be found out in due time. Right at that moment I had a nasty Southeastern headwind to push against. It was tough sledding heading South. The gravel was wet and actually muddy in some spots here. They must have gotten quite the gully washer that morning. No trouble with fresh gravel, at least there was that. I found plenty of good lines on my way.

Best to heed the sign, but I had testing to do!

Petrie didn't look too bad. I actually made it to the place where the black dirt turned to clay, then all bets were off. The wheels stopped turning and I was obliged to walk after that. You can see the top of the hill in the image here, and that is where I finally could drop the bike and roll it along where there was a line of clover blooming on the left side of the roadway.

Once I reached the grassy margin in the middle I could ride again.

The Resolutes clear mud like a champ, so once I got rolling again I didn't have to stop to scrape mud at all. In fact, after about a half mile of gravel you'd never know that I had been packed up with mud unless you looked at the frame. The tires looked fine.

Heading East was better than going South, but when I turned out on Ansborough, I got the full effects of the tailwind and I was off to the races. The gravel was newer over here, but as long as I was headed North it did not matter. I found it easy to keep hammering.

I went down Washburn Road and back to Aker, then started making my way back toward Waterloo. I was keeping an eye on the sky the entire ride, but it wasn't until I made it back on to the Sergeant Road bike path that I began to think I might end up getting caught in some rain.

It was going to be a close call, but in the end, I decided not to try to outrun this. I know when to make a run for it and this rain cloud wasn't warranting a heavy output. So, I motored onward.

Getting wet on the bike is maybe something a lot of people try to avoid. I guess I'd try to avoid getting into a heavy thunderstorm, but your garden variety shower? Meh..... Not that big of a deal, especially in the Summer. I wasn't too worried, and as it turned out it didn't really start raining on me in earnest until I was about 12 blocks from the house.

It is kind of a weird thing with me and rain. Once it starts raining, and I am riding, I get a boost of energy. Once on a Guitar Ted Death Ride Invitaional it rained on us and I took off up the steep hills of Jasper County like I had a turbo boost. A friend started calling me "Contador" because I was climbing so well. It was just that it was raining. I cannot explain why I am that way.

Well, the rain made me go like a son of a gun and I was home before ya knew it, dripping wet on the front porch. Some "solstice ride"! Usually it is a long day in the saddle where you expect to have to use copious amounts of sun tan lotion. Not dodging rain storms and lightning bolts!

Thinning The Herd: Part 2

Navigating the Iowan jungle.

Back in the first "Thinning The Herd" post I spoke about the Fargo Gen 2 bike and why it was that I was parting ways with that rig. I sent the frame and fork off to its new owner, and that should be arriving with him this Friday, if not before. So, that chapter in my bicycle fleet is now nearly closed.

Of course, I stripped a bunch of parts off that bike and I alluded to that in the first post linked above. The Gen 2 Fargo was known as the "Fat Fargo" since it was sporting those 27.5+ wheels and tires. This was a key part for another bike, my Fisher. Sure, it was actually a bike sold as a Trek, but c'mon! This is a Fisher bike that came out the year after Trek absorbed Fisher. I'm sure it was meant to be a Fisher.

Now for a bit of history on the Sawyer. The  Sawyer was a 2 X 9 bike with a rigid fork. Trek sold it for two years and then it went away. Obviously, it was a special model made to be an evolution of Gary Fisher's original "Klunker" bike. A model of which made a cameo appearance in the mid-90's as well. In my opinion, the 2011/2012 Sawyer model was the best looking non-custom cruiser styled mountain bike ever. Unfortunately, the absorption of the Fisher brand in to Trek's corporate "borg hive-like" culture killed the marketing of this bike. Essentially was it doomed from the get-go because Trek dealers largely ignored the whimsical, oddball Sawyer and due to the lack of marketing buzz, many riders didn't know what to make of it.

The 27.5+ wheels and this bike were meant for each other.

 Trek sent me a Sawyer to review for Twenty Nine Inches back in the day and when I was done, they, as many companies did, ignored my requests for instructions to send it back. So.......here it is to this day. I liked the Sawyer as it was offered, but it had almost no corporate buzz and getting anything beyond the basics from Trek about it was met with radio silence, for the most part. As I surmised at the time, it was an expensive bike to produce, since it had so many proprietary castings and the frame was difficult to produce. With its triple top tubes having to be precisely bent and welded into place, I can imagine that this frame kept some Trek folks up late at night worrying that they might have a load of misaligned frames on their hands. What is more, it has a split drive side drop out, which is one of the trickest belt compatibility solutions I've ever seen. Had this been a NAHBS one-off custom, it would have been a very popular rig. But it got stuck with a Trek head tube badge and that pretty much killed the "cool factor" right there. Many Sawyers, which were about $1500.00 retail, ended up selling at a grand or even less by 2013 just so dealers could clear them out.

So, like I say, I had this thing setting around so I began to play with it. I had an older Fisher with a 100mm Fox fork, a G2 geometry fork, so I put it on the Sawyer. Then I swapped the geared set up to a Gates Center Track for another review of those parts. Along the way, I had trouble getting comfortable with the gangly, high, and akward Sawyer. It was like a teenager that hadn't matured into its overly large feet and hands. It just never set well with me, and although I was, (and still am) in love with the look, I could never reconcile with how this bike felt despite multiple changes to it. The stock set up seemed to be far better, so I purposed to go back to that to see what I was screwing up with what I had been doing to this bike.

So, the whole 27.5+ thing started blowing up in 2013, and I got sent a set of WTB Trailblazer 2.8"ers to try out. The Sawyer was a perfect candidate for the wheels. I knew people had shoe-horned 29+ wheels into Sawyers, so the clearances were there. The bottom bracket, in a choice made by Trek/Fisher in what I am sure was an influence from Gary himself, was made to have almost zero drop. Putting slightly smaller diameter wheels on the Sawyer would be okay then.

The wheels seemed tailor made for the Sawyer. For the first time the bike seemed "right". I actually had a ton of fun with it set up with the 27.5+ wheels. But I ended up choosing to go with these wheels on the Fargo, which, for a time, proved to be a great choice as well. The Sawyer, in the meantime, languished in the corner of The Lab where it was doomed to sit until I either sold it or got some 27.5+ wheels for it. I never was motivated to build up another 27.5+ set up, so instead, I almost sold the Sawyer a couple of months ago.

Then the realization that I may want a Ti Fargo more than two steel ones came along. I sold the Gen 2 frame and fork, and the wheels were suddenly available again, so.... Now I am planning on keeping this bike around.

Now you know the rest of the story.