Friday News And Views

Image courtesy of Canyon Bikes

Canyon Unveils New Grail Rift Gravel Bike

Canyon announced on Tuesday of this week a new gravel bike which was the subject of many rumors over the past several months. The bike's main attraction being a suspension fork from DT Swiss tuned especially for gravel riding.

The range-topping Grail CFR Di2 Rift model in carbon fiber (natch!) will fetch a handsome price of $7,849.00 USD.

The bike is aimed at racing, so this is reflected in the geometry. The Grail Rift does not sport the slackest head angle, (71.5 degrees for a Large) and it has a stated 42mm tire clearance, which doesn't seem to be "cutting edge" these days.

The frame has internal storage, which is all the rage for the newest gravel bikes, and the range-topping model shown here has power meter crank arms from 4iii.

Comments: The press was going bonkers over the bike earlier this week, and at the asking price, it is a bargain. However; there are a few things which I've got opinions on which would render this bike, in reality, a rather pedestrian offering.

First off, while the DT Swiss fork has a lock-out option, and it probably works slightly differently than the other short-travel gravel forks out there, it still only has forty millimeters of travel. That is barely over an inch and a half for you folks who are not metric-fluent. Physics is a hard and fast science and there is no free lunch when it comes to what you can do with forty millimeters of travel. Add to this the extra weight of a suspension fork, the required, semi-yearly (at the least) maintenance, and you can see where the telescopic gravel suspension fork may not be all it is cracked up to be.

One can gain better function (absorption of vibrations), lighter weight, a no-maintenance part, and at less cost by going with one of the several gravel suspension stems. Plus, the stem can be transferred to other bikes easily. Of course, I highly recommend Redshift Sports here, but there are other options as well.

Then you have limited tire clearances, which is not ideal, plus the geometry, which steepens as you blow through forty millimeters of travel, by the way, and I just do not see the appeal of this bike. There are a lot better alternatives out there, in my opinion. 

HED Lincoln G25's (Image courtesy of HED Wheels)

HED Wheels Announces Stillwater 50, Lincoln 25 Carbon Gravel Wheels:

HED released information on Tuesday of this past week regarding two new carbon fiber rimmed gravel wheel sets. Named for the cities where two well known gravel events occur, the Limcoln G25 and Stillwater G50 feature wide inner rim widths and hooked beads for best tire retention.

The Stillwater G50 has, as the name implies, a 50mm rim depth. The inner rim width is a generous 28.5mm which HED claims can be paired with tires from 700 x 40mm to 29" x 2.25" wide. Cost for this model is $1,984.00 and wheelsets are estimated to weigh about 1,640 grams.

The Lincoln G25, is as you'd expect, a shallower rim profile of 25nmm, but it has the same internal rim width as the Stillwater.  The price is the same as well. Weight is less at an estimated 1,430 grams a pair.

One other difference is the weight limitation. The Stillwater G50 is limited to riders weighing 240lbs or less while the Lincoln had no weight limitation posted on its webpage. 

Check these wheels out HERE. 

Comments: I had just been checking out HED Wheels site about a week or so ago and saw nothing new, so maybe I had some premonition about this. Ha! Seriously, the honoring of gravel events, by way of naming these wheels after two iconic gravel race's home cities, is pretty cool and follows with the naming convention HED started when they changed the Eroica wheel range to be "Emporia". 

Gravel Cycling Hall of Fame Inducts Its 2025 Class:

Over the last three years I have been in Emporia, Kansas for the induction of the Gravel Cycling Hall of Fame nominees. This year, mostly due to my not having a vehicle anymore, I chose to stay at home. But the show must go on, (as if it matters if I am there or not!) so the GCHoF welcomed in four new people into its roster of feted gravel cycling greats.

This year the inductees were Amanda Nauman Sheek, Ted King, LeLan Dains, and John Hobbs. The festivities, held at the historic Grenada Theater,  were attended by a sold-out crowd who all enjoyed a fine meal and drinks. The event is sponsored by Shimano.

Comments: When the GCHoF announced the 2025 class of inductees in January I wrote a detailed post on each inductee and made a case for a glaring omission. You can read the post by clicking HERE if you want my takes on each inductee. 

Image courtesy of a blog reader from a Facebook post

Unbound Gravel Looking To Be Wetter Than Usual For 2025:

Here I have an image forwarded to me from a Facebook post from about a week ago showing the flooding at the time in and around the Unbound 200 course. These images appear to be from the flood plain area surrounding Emporia, Kansas. 

Emporia is in the midst of a confluence of several smaller creeks which feed into the Cottonwood River, which flows just South of the town. It is not uncommon to see flooding around the immediate area. So, if things have calmed down in regard to flooding by now, this may be much adieu about nothing.

Weather conditions should be fair for the event itself, but some low water crossings may have a good amount of water in them for the riders to deal with. Furthermore, it is not uncommon for flooding to rut out remote roads, and cause finer rock to be washed away in valleys where water crosses the road. This removal of finer material can leave chunky, sharp flint hidden under the water, and can cause issues with tires easily.  Whether or not this will be the case on Saturday, we shall soon see.

I've no reason to believe this year will be in any way like "The Mud Year" of 2015, or even like 2023, unless an oddball shower pops up at the right (wrong?) time. This doesn't seem likely for 2025. By the way, I will have an ode to the 10th anniversary of "The Mud Year" coming up for you to read tomorrow, so look for this post to get a feel for what it was like back then. 

Image courtesy of BTCHN Bikes.

 Titanium Flared Drop Bar? BTCHN Bikes Says "Yes!"

I came across a social media post showing a drop bar with welded in corners, which I assumed was titanium, but I inadvertantly lost the "story" and couldn't find it again. Then I found a Tweet on X which revealed the source as BTCHN Bikes, a custom titanium fabricator located in Chico, California.

The key to BTCHN Bikes Ti Drop Bar is a 3D printed 'corner' piece which is then welded to a tops section and a ramp/drop/extensions section on each side. Due to this unique construction method the width and flare of the Ti Drop is customizable. Prices start from $620.00USD and go up depending on finish options. Pre-orders are open now through June 4th, and you can check out this offering HERE. 

Comments: Titanium drop bars. I've always thought this would be a cool idea, since titanium flat bars seem to have quite a following, and titanium has certain attributes which would seem to make it ideal for a flared drop bar, in terms of ride feel. 

However; there was no good way to execute the tight bend from the tops section to the ramps and finally to the extensions. That is, until this new 3D printed idea BTCHN Bikes has was employed. I know we rely on welds every day we ride bicycles, but the thought of a welded handle bar in drop bar form made me a bit uncomfortable for a hot minute. Then I came to my senses and realized I was being silly. Heck, I'm riding handle bars with brazed on extensions now!  Which reminds me..... I need to get on the final review for those!

Anyway, I thought this was an interesting alternative for a flared drop bar which just might prove to be a decent riding bar for gravel. 

That is a wrap for this week folks! Get out there and ride those bicycles!