Salsa Cycles Fargo Page

Sunday, March 20, 2011

The Dirty Kanza 200 Chronicles; Tweaking The Set-Up

I have been tweaking the set up on the Black Mountain Cycles "Monster Cross" bike, which I am re-naming "Orange Crush", since it looks the color of that delectable soda that once came in 16 ounce glass bottles.

So, anyway, here is the bike all dressed up in bags, minus a possible seat bag. This is getting real close to how I will leave the bike for the Dirty Kanza. Maybe even single speed!

The changes made include a new stem, seat post, and a "Joe Mesier Set Up" for the water bladder. Joe may not have invented this way of doing your hydration, but he was the first guy I heard about it from, and he's all about bags anyway!

I topped off the deal with one of my ever-present Banjo Brothers Top Tube bags, which is a great way to carry gels and a camera.

Here is a closer look at the Revelate Designs tangle bag with the 70oz Camelbak reservoir stuffed inside it. I laid it in there sideways, so to speak, to keep the width down to a minimum. I filled it completely up and it sat in there, pretty as a pea, for my entire training ride with no issues.

Now I arranged things so the long hose comes from down low and in the back end of the bag so that gravity will help feed the drink tube, although that isn't entirely necessary. It does make all that hose length easier to manage though! The Wide Mouth openng is at the front of the bag. There is still a little room up there for some smaller items as well. Maybe a spare tube will reside there for the DK 200.

Here is a look from up top. This particular hose has one of those fancy-pants Flowmeters on it, which as far as I am concerned makes a great hangar for the hose and not much more than that. Although, it is a pretty accurate way to see what is left "in the tank".

I simply hang the Flowmeter on the brake cable as it comes out from under the bar tape. It stays put really well on gravel too. Notice I have the end of the hose sticking straight up here to illustrate how you do have to bend downwards a bit to get the bite valve in the mouth. On riding this set up, the hose is typically laying down across the top tube bag, and that pulls in that loop to the left you see here against the bike and it isn't rubbing or catching on anything.

And that bad ol' black Bontrager Select stem has been swapped out for this good ol' polished silver Ritchey Classic series "4 Axis" stem. Wow! Not only good looking, but insanely light. (As light as I'd ever feel comfortable with using)

Now I just need to make that ol' black GT branded cable hangar all nice and silvery. Either that or track down something silver to replace it with. A minor detail? Yes- but since I am bothering to go to the trouble of making the bike look classic with the silver bits, I may as well finish off the job.

Finally, the silver Ritchey Classic Two Bolt post. This replaces the arguably better, (from a "classic" standpoint), Campy Aero post. The thing is, the Campy post was at minimum insertion, and I wasn't totally comfortable with that. This Ritchey post is a 350mm one, and allows me to go up a "smidge" if needed, while assuring me that I won't be damaging my BMC "Orange Crush" by running too little seat post insertion.

Okay, so what about training? Well, I did get in some slower training rides, focusing on constant power output, spinning circles, and concentrating on not pushing too hard. The bigger gear is treating me just fine. I have not noticed too much of a negative on hills, and flats are faster for sure. The double wrapped tape job is great. No hand issues so far.

The next step will be getting some bigger rides in occasionally. Something in the 3+ hour range is needed to start to assess comfort issues and for just getting used to living on the bicycle.

2 comments:

  1. Looks Great! Now you just need to dump the cable hanger and seat post clamp in oven cleaner and you are done!
    [no comment on the green bar tape... ;-) ]

    ReplyDelete
  2. For the securing the hose from my tangle bag, I have found the looping it around the zipper loop of the gas tank bag works well, and then putting the bite valve into the map pocket.
    http://www.flickr.com/photos/jon_baler/5235725176/

    Even simpler, I have started to just loop it around the stem using a velcro strap (like a reflective ankle strap).

    ReplyDelete