Salsa Cycles Fargo Page

Saturday, July 18, 2020

Could The Fargo Gen 1 Be Replaced? - Part 2

Black Mountain Cycles La Cabra- Unobtanium until further notice.
Last Thursday I posted a thought piece concerning choices for replacement of the Gen I Fargo- (as if!)- and I suggested two possibilities. Well, you dear readers sent in a bunch of comments, and as always, instead of answering in the comments where pretty much most folks will never look, I decided there was enough to warrant a "Part 2" on this subject. I will address each point brought up briefly, and in no particular order.

Concerning Kona's Steel: One comment I got which I thought was extremely interesting was the thought that Kona had done their best frame/fork work on their first generation Sutra LTD's and then things got progressively worse in terms of frame ride quality and steel choices. This can be a really complex subject, so I am just going to breeze through a few thoughts, because I could write a few posts about steel frames alone here. (And I probably have over the 15 years of this blog, come to think of it)

Steel frames, in general, are not well understood. There is a fair amount of "cork sniffery" when it comes to steel: "Reynolds is best! No! Columbus! Bzzzzt! Wrong!The best is Tange Prestige!" On and on........

The reality of 4130 CRMo and its variants is that there are so many butted profiles available that they are too hard to list. Steel tubing has been around in one form or another since the mid-19th Century and bicycles were made of the stuff since almost the beginning of the two wheeler. Some companies have made a lot of hay in regard to fans and claims of certain magical qualities. The thing is, if you know your way around designing a frame, you can source tubing that - if constructed correctly- would kill the ride feel of any name brand frame tubing. It happens all the time. But if- say, True Temper is your jam, well then......you go! I'm just saying that no one famous name tubing brand has anything over any good, butted, well put together frame. Even production frames can ride better than custom ones do if things are done right/wrong.

The Singular Gryphon from around 2009. It rode GREAT, but had low versatility

Finally, over the past 15 years, certain required tests for the sale of frames world-wide has pretty much killed the ride quality of steel frames now compared to 'then'. Take the El Mariachi. When the '07'to '09 design was discontinued, Salsa Cycles went to a new tubing for the El Mar. The result was a stiffer, more lifeless ride. Same with the Fargo. Even other companies steel frames were beefed up to pass testing and as a result, ended up losing that magical ride feel. So, it makes sense to me that "first efforts" in steel frames don't measure up to later model ones since this process seems to still be in effect where steel frames are being over-built to pass arbitrary testing protocols.

Suspension Correction vs Stem Spacers, Long Head Tubes, and High Rise Stems: You need to get somewhere and you have two ways to do it- One route works, and so does the other, but there are certain differences to consider which may influence why that you take one over the other. Scenery, times, stress levels, construction, etc. Well, how you do your fork/head tube/stem set up for a bike is pretty much the same deal.

Long head tube/short stack/low rise stem, or how about a short fork, short head tube, a really high rise stem, and maybe quite a few spacers? Both bikes could have exactly the same handle bar position in space. It's how you get there, and what matters about that, which matters to any individual rider. Some reasons for one against the other may have to do with aesthetics. Personally, I think a suspension corrected rigid fork, which would be the same length as a 100mm travel suspension fork, (corrected length to match a suspension fork's axle to crown height, make sense?), looks goofy, unless you actually use a suspension fork there from time to time. Others may have no issues with that look. But also- consider that this longer than usual fork on a MTB has to pass those MTB tests. That means that all that tubing length that could give you an awesome ride now has been beefed up to pass a test and rides like a dead piece of wood compared to a shorter, rigid fork like the Gryphon, shown above, which probably had the liveliest, best riding, (and weakest), rigid fork I have ridden.

Kinda short fork, short head tube, tall stem. Just one way to get there.
So, it's a little more than what you are seeing. Those longer rigid forks come with compromises. Longer head tubes have longer steer tubes, of course, so those tubes, especially if they are straight gauge, flex more and feel smoother. Shorter head tubes with short steer tubes have a stiffer feel. Carbon forks? Well, that's another factor on top of all the rest.

Fork Trail & Wheel Flop: Someone asked about the Kona Sutra and its 69.5° head tube angle and 55mm offset fork in regard to handling. Well, it depends upon the tire you use. Bigger volume 700c tires will increase trail, but with a 45mm gravel tire, the trail is in the 70's, which isn't crazy. Even with a 55mm tire, it is only 80mm. I wouldn't fret about it........

V/O Piolet: I've looked at this bike a lot. Someone said they replaced their Gen I Fargo with one. Nice bike- lateral move. Doesn't really do anything different for me over what I've got already.

Mone El Continante: Another bike I've drooled over. Stunning rig. Probably a cool bike. 29+ though and I'm not real sure about the sliding frame bits. That looks like a part begging to seize up and/or make noises. One man operation..... Meh. Too many what-ifs there.

Black Mountain Cycles LaCabra: One of you called it "the elephant in the room", which made me laugh out loud. Look......it isn't currently a bike you can even get. But let's say that Mike Varley gets it done and brings these in. Would that bike be a bike I could replace a Fargo Gen I with? Certainly, it very well could do just that. I've already said I'd like one.

But with things going the way that they are, who knows? I don't. Mike may not even know. Everything is different now, so the LaCabra may end up being a pipe dream, or I may end up with one next year. If I do- I will set it up with 650B X 2.8" tires and run with that first. As I stated back in early April, this LaCabra would be the fat, 650B bike and my rigid MTB. My current Fargo would be the 700c option.

And that's that for this subject. Thanks for all the comments!

3 comments:

  1. Cork Sniffery, eh! Well, I'm not well versed in either that or the nuances of various "vintages of steel frame tubing I'm not even looking to go with a custom build. As with the liquid in the bottle in which the cork is stuck and the variety of materials used for bicycle tubing either could be vinegar or something special to my senses. That's when I defer choices to folks "in the know". More tutorial on frame materials might be good to hear from you, Sir. Great response to the comments.

    ReplyDelete
  2. Peter Weigle has a decal "Guaranteed not made with Reynolds 531"
    It is common for single person shops to use a mix of tubes brands and
    types, to get the desired bike. You won't see a tubing sticker on them.
    Tubing stickers are for selling to the punters.
    Right up there with "Built with a mix of Toray 800 and old Gazetta del Sports"
    says so right here next to the "Made Usa* (as in Usa, Taiwan) sticker.

    ReplyDelete
  3. My 2019 Fargo is the bike I hate to love and like to ride. Compared to my other 2 bikes, it rides like a brick. Riding this thing with 29x2.6 tires feels like I am on a Surly fat bike. I don't know how to explain it as it's just lifeless. I think constantly about selling the whole bike and starting over but I think I would miss it? I mean it is fun to ride. It goes where you point it. I keep oogling at pics of Gen 1 Fargos and wondering how it would compare? I've fallen prey one too many times to my own impulsiveness and regretted selling something so.......

    ReplyDelete