They Come In Threes

At least one thing went right...

Ever hear of that old saying that "bad things come in threes"? Well, I have to wonder after this past week if the saying is true. I had a pretty unlucky string of road blocks which has stacked things up in the old Lab at Guitar Ted Headquarters. 

The first check came while dealing with the State Bicycle Co. Monster Fork review. I had ridden it enough in one offset setting that it was time to go to the other choice. Well, the first thing I ran into was that the wheel did not want to come out of the fork without a bit of dead blow hammer influence. Not good. Then I figured out that the offset change was not accounted for by the designers of the fork with a corresponding change in brake position. No go.

So, that is in limbo now until I hear back from my contact at State Bicycle Co. to see what they want me to do from this point. Is it just my fork (doubtful) or is it a flaw in the basic design (I'm betting on this one)? We will see......hopefully. At this point I don't know why it is the way it is, I just know it is. 

Next up I decided to try the Irwin Cycles Aeon 35 carbon wheels in the Raleigh again, since I figured out that it was the worn drive train which was the problem, not the wheels. Also, I had to swap wheels due to those Roval wheels having spoke issues. Should have been a "no big deal" swap, since I had those Irwin wheels in the bike at one time. However, since I thought it was the free hub body going bad at first, I removed the Irwin wheels. Then I had taken that rear wheel apart to inspect it. In the process I must have mislaid the drive side quick release end cap and now I cannot find it. 

Email sent to Irwin on Friday. Until I hear back from them, that will be in limbo as well..... 

A screw loose here....

Then on Saturday I was riding my new-to-me fixed gear bike and the screw holding on the brass bell to the handle bar fell out. Next thing you know I was making a fancy catch of the bell before it was jettisoned to the pavement. 

This wasn't that big of a deal, but after the first two things it was something that pushed me to the end of my rope. I just took everything to the Lab, parked the bike, set the bell in the handlebar bag, and grabbed my Honeman Flyer for a mind-cleansing ride around the neighborhood. 

Hey! I just put some new fuchsia bar tape on the HF. Looks great and feels good. At least something went right with bicycles recently! 

Oh yeah, and Thursday was spent fixing my front porch steps until I ran six screws short of being able to finish and I had no time to go get more. That got finished up on Friday. So frustration was a bit of a theme of late here. I am hopeful this changes soon. 

Stay tuned for updates.