Soggy Saturday

It's been a wet couple of days here in Iowa. It's put the training run for Dirty Kanza off for a day. It's looking as though the temps are going to turn around just in time for the event, which will be the first time that I've been in humid, warm temperatures riding a bike for a long time. Hopefully it won't be a shock to the system. The training ride today would have been a cold, soggy mess, which is a far cry from what I'll be dealing with in Kansas. No sense in risking the chance of getting sick, or wrecking equipment today. Tomorrow is supposed to be a bit better, so I'll take my chances then.

It's going to be a full-on test of the ride set up I have planned. All the lights, map case, and any extra stuff like nutrition is coming along for the ride. Even though I'm not probably going to use much of it, it's coming along to see how it all works together on the bike. I can make any final tweaks to my set up and things I carry along now instead of wishing I could in the middle of "No-where-ville", Kansas. Hopefully, the set up I have planned will be really close to ideal.

My plan so far also includes riding down to the event with a fellow T.I. veteran and getting all settled in on Friday night down in Emporia, Kansas. We are expecting a small contingent of Iowans to show up, plus some other T.I. vets, so it should be a bit of a "reunion" of sorts. I am really looking forward to riding with these guys. Heck, I'm really looking forward to riding with anybody! I usually ride alone whenever I go out. Not whining here, it's just how things have always worked out for me. Most people I know are on a different schedule than I am. I never let that stop me from riding my bikes, so I usually go it alone.

I still have some minor decisions to make.

Let's see........processed beef products, or cookie dough?

Hmm...............

Soggy Saturday

It's been a wet couple of days here in Iowa. It's put the training run for Dirty Kanza off for a day. It's looking as though the temps are going to turn around just in time for the event, which will be the first time that I've been in humid, warm temperatures riding a bike for a long time. Hopefully it won't be a shock to the system. The training ride today would have been a cold, soggy mess, which is a far cry from what I'll be dealing with in Kansas. No sense in risking the chance of getting sick, or wrecking equipment today. Tomorrow is supposed to be a bit better, so I'll take my chances then.

It's going to be a full-on test of the ride set up I have planned. All the lights, map case, and any extra stuff like nutrition is coming along for the ride. Even though I'm not probably going to use much of it, it's coming along to see how it all works together on the bike. I can make any final tweaks to my set up and things I carry along now instead of wishing I could in the middle of "No-where-ville", Kansas. Hopefully, the set up I have planned will be really close to ideal.

My plan so far also includes riding down to the event with a fellow T.I. veteran and getting all settled in on Friday night down in Emporia, Kansas. We are expecting a small contingent of Iowans to show up, plus some other T.I. vets, so it should be a bit of a "reunion" of sorts. I am really looking forward to riding with these guys. Heck, I'm really looking forward to riding with anybody! I usually ride alone whenever I go out. Not whining here, it's just how things have always worked out for me. Most people I know are on a different schedule than I am. I never let that stop me from riding my bikes, so I usually go it alone.

I still have some minor decisions to make.

Let's see........processed beef products, or cookie dough?

Hmm...............

Karate Monkey vs. Inbred 29"er!: The Parts

As promised yesterday, I am going to go through some of the component highlights of each bike and give you my impressions of them.




Here we have a view of one of the common parts to each of the bikes. The classic Avid BB7 mechanical disc brakes. These have a super easy set up, are easy to maintain, and have incredible stopping power that is easily tunable to your liking. I would highly recommend them on the value per dollar spent alone. That they also are super low maintenance and perform flawlessly is a bonus. Also pictured: Salsa skewer, which is the best skewer in the world. No questions. Period! Also, the Nokon cable housings. Love them or hate them. They are expensive, they are sealed from the elements, they have zero compression, ( good for mechanical disc brakes), and they last for a loooong time. My Karate Monkey's set is going on four years now. Still works great. Did I say that they have gone through three winters worth of slop and crap? Worth every penny you pay for them, in my opinion.





Ahhhh! What can I say? This is hands down the most comfortable saddle I have ever sat on. You owe it to yourself to try this saddle out, or the more mountain bike inspired Nisene, which has a baggy short friendly profile. Fizik also makes the Arione in several different color combinations to suit your fashion tastes.


The seat post is the highly functional Salsa Shaft. It has independant bolts for adjustments of tilt and set back. It's ingenious, it's strong, it looks good, it's light weight while not being scary light, and it's so inexpensive for what you get. It's been hailed as a top notch product by some bike rags. Don't mind them! Guitar Ted Productions gives this it's hearty approval! That's gotta be a better endorsement, 'cause I say so! Ha ha!

Okay, that's it for today. I'll have more for you all tomorrow, and through out the weekend. Remember to get out and ride! That's what it's all about. Also, good luck to Mr. 24 and Buchanandale as they head out to race twelve hours on a soggy Ferryville course this weekend. Go Cannondale riders! Look for race reports from them come Sunday or so.

Karate Monkey vs. Inbred 29"er!: The Parts

As promised yesterday, I am going to go through some of the component highlights of each bike and give you my impressions of them.




Here we have a view of one of the common parts to each of the bikes. The classic Avid BB7 mechanical disc brakes. These have a super easy set up, are easy to maintain, and have incredible stopping power that is easily tunable to your liking. I would highly recommend them on the value per dollar spent alone. That they also are super low maintenance and perform flawlessly is a bonus. Also pictured: Salsa skewer, which is the best skewer in the world. No questions. Period! Also, the Nokon cable housings. Love them or hate them. They are expensive, they are sealed from the elements, they have zero compression, ( good for mechanical disc brakes), and they last for a loooong time. My Karate Monkey's set is going on four years now. Still works great. Did I say that they have gone through three winters worth of slop and crap? Worth every penny you pay for them, in my opinion.





Ahhhh! What can I say? This is hands down the most comfortable saddle I have ever sat on. You owe it to yourself to try this saddle out, or the more mountain bike inspired Nisene, which has a baggy short friendly profile. Fizik also makes the Arione in several different color combinations to suit your fashion tastes.


The seat post is the highly functional Salsa Shaft. It has independant bolts for adjustments of tilt and set back. It's ingenious, it's strong, it looks good, it's light weight while not being scary light, and it's so inexpensive for what you get. It's been hailed as a top notch product by some bike rags. Don't mind them! Guitar Ted Productions gives this it's hearty approval! That's gotta be a better endorsement, 'cause I say so! Ha ha!

Okay, that's it for today. I'll have more for you all tomorrow, and through out the weekend. Remember to get out and ride! That's what it's all about. Also, good luck to Mr. 24 and Buchanandale as they head out to race twelve hours on a soggy Ferryville course this weekend. Go Cannondale riders! Look for race reports from them come Sunday or so.

Raliegh XXIX to Hit The Trails Near You!

I just got word on the new 29"er steel single speed hardtail bike from Raliegh that was inroduced at a dealer only meeting in Chicago, yesterday. Here are the details: Double butted 4130 steel frame with CNC inserts for dropouts. (There maybe a derailluer hangar option in the future) Avid BB5 disc brakes, Alloy 32 hole, single speed cassette hub with a quick release, ( suggesting an eccentric bottom bracket, although my source did not specify this.) A straight legged steel fork will support an Easton bar and stem combo. A Truvativ Fire crank will spin a 32 X 20 gear combo. Wheels will consist of WTB Speed Disc rims shod with Exi Wolf treads. It'll all be done up with a "pretty dirty-red paint job" as quoted from my source. Retail price should be around $700 dollars. Hurry up and get yours now! My source says the first run will be sold out in a hurry, judging from dealer response. Look for a picture to come soon!

Raliegh XXIX to Hit The Trails Near You!

I just got word on the new 29"er steel single speed hardtail bike from Raliegh that was inroduced at a dealer only meeting in Chicago, yesterday. Here are the details: Double butted 4130 steel frame with CNC inserts for dropouts. (There maybe a derailluer hangar option in the future) Avid BB5 disc brakes, Alloy 32 hole, single speed cassette hub with a quick release, ( suggesting an eccentric bottom bracket, although my source did not specify this.) A straight legged steel fork will support an Easton bar and stem combo. A Truvativ Fire crank will spin a 32 X 20 gear combo. Wheels will consist of WTB Speed Disc rims shod with Exi Wolf treads. It'll all be done up with a "pretty dirty-red paint job" as quoted from my source. Retail price should be around $700 dollars. Hurry up and get yours now! My source says the first run will be sold out in a hurry, judging from dealer response. Look for a picture to come soon!

Karate Monkey vs. Inbred 29"er! Part III

After a couple posts on frame details and the like we finally get down to business! How do these two frames compare when built up and ridden as single speed bikes?


First, let's look at the Karate Monkey. When I built this bike up in 2003, it was also my first single speed and my first 29"er! Alot going on all at the same time! I have ridden this bike pretty consistently since then, though so I feel that I can give you all a good impression on it's ride quality.


I must say that it's a bit less forgiving than I had hoped. Not bad, but that spring, that magic steel feel......well, it isn't quite there with the Monkey. A couple things to remember here. First, it's not a high end tube set. It's thicker, stiffer tubes will not ride like a finer steel frame would. With that said, I bet this bike would come alive as a loaded touring bike. Secondly, the short exposure of the seat post makes for a stiffer ride. There isn't much standover for a frame this big on the Monkey. I actually am running a road seat post in mine! If it had a longer extension of seat post, the ride would feel less jarring. Again, it's not terrible, it's just not quite up to my standards of what a steel frame should ride like.

Other notable things about this frame and fork setup: The fork is pretty stiff! It doesn't flex much, so the ride is more bumpy. Handling is precise and pretty snappy. The bike as a whole turns well, gets on a different line right when you want it to, and handles single track just dandy. The bottom bracket sways noticeably under heavy pedalling. There is no chainstay brace, which might contribute to this a bit.

Track ends and slotted disc caliper mounts are a pain! Give yourself a half hour for a rear flat repair. Better have nice, long allen keys to develope enough torque to re-install your caliper when the job is finished, too. No fenders that I have found really work on this without modifications. This is especially true with the disc calipers installed. The rear braze on for the last run of housing before it would run into the rear derailluer sticks out at just the right angle to snag your heel cup on your right shoe. I ruined a perfectly good pair of Lake cycling shoes this way! Grrr!

The Inbred has that steel feel to it that the KM lacked. It springs forth in a way that makes fans of steel smile with delight. I cannot explain to you just what that is, but you ol' steel guys know. Yes...you know! I think part of the smoothness of the Inbred has to be the long seat post extension that is required of the design. I am running a 400mm post on mine. This is going to give you......well, alot of give! The compactness of the rear triangle matched with a more compact bottom bracket/front triangle design makes for a more flex free bottom bracket area, even without a chainstay brace. Those little "Bontrager-esque" gussets help here perhaps?

The Inbred cuts a corner with a little less input and a bit more precision than the KM. This is no doubt in part due to the different rake on the fork that On One uses, which quickens up the steering a bit over the "standard" 29"ers out there. The fork is quite compliant, giving a smoother ride. Not noodly, not throwing you off line, just not tooth-rattling stiff. It is a rigid fork, after all. The bike carves turns and also seems to behave very well under stomping up climbs and over very rough terrain. Single track is it's home. I can't find fault with it's handling. It's very much like my old Bontrager in this respect, which is high praise. That ol' Bontrager was awesome!

Other things of note: There isn't much to recommend this to touring cyclists, commuters, or the like. It's a purpose built mountain bike! The sliding drops are a bit troublesome. I have had the drive side slip forwards, as the provided chain tug is capable of flexing outwards and allowing the wheel to cock sideways in the frame. I have used an extreme amount of torque on the two allen bolts that fix the slider to the frame, but to no avail! I believe On One has a beefier tug coming out which should solve this problem for future owners of an Inbred. It also will be available separately for those of you already burdened with this problem.

Tomorrow, I will detail some of the parts highlights of these two bikes. Thanks for reading!

Please continue to give us feedback on the question I raised concerning Trans Iowa. Your feedback is very valuable to us! Thanks!

Karate Monkey vs. Inbred 29"er! Part III

After a couple posts on frame details and the like we finally get down to business! How do these two frames compare when built up and ridden as single speed bikes?


First, let's look at the Karate Monkey. When I built this bike up in 2003, it was also my first single speed and my first 29"er! Alot going on all at the same time! I have ridden this bike pretty consistently since then, though so I feel that I can give you all a good impression on it's ride quality.


I must say that it's a bit less forgiving than I had hoped. Not bad, but that spring, that magic steel feel......well, it isn't quite there with the Monkey. A couple things to remember here. First, it's not a high end tube set. It's thicker, stiffer tubes will not ride like a finer steel frame would. With that said, I bet this bike would come alive as a loaded touring bike. Secondly, the short exposure of the seat post makes for a stiffer ride. There isn't much standover for a frame this big on the Monkey. I actually am running a road seat post in mine! If it had a longer extension of seat post, the ride would feel less jarring. Again, it's not terrible, it's just not quite up to my standards of what a steel frame should ride like.

Other notable things about this frame and fork setup: The fork is pretty stiff! It doesn't flex much, so the ride is more bumpy. Handling is precise and pretty snappy. The bike as a whole turns well, gets on a different line right when you want it to, and handles single track just dandy. The bottom bracket sways noticeably under heavy pedalling. There is no chainstay brace, which might contribute to this a bit.

Track ends and slotted disc caliper mounts are a pain! Give yourself a half hour for a rear flat repair. Better have nice, long allen keys to develope enough torque to re-install your caliper when the job is finished, too. No fenders that I have found really work on this without modifications. This is especially true with the disc calipers installed. The rear braze on for the last run of housing before it would run into the rear derailluer sticks out at just the right angle to snag your heel cup on your right shoe. I ruined a perfectly good pair of Lake cycling shoes this way! Grrr!

The Inbred has that steel feel to it that the KM lacked. It springs forth in a way that makes fans of steel smile with delight. I cannot explain to you just what that is, but you ol' steel guys know. Yes...you know! I think part of the smoothness of the Inbred has to be the long seat post extension that is required of the design. I am running a 400mm post on mine. This is going to give you......well, alot of give! The compactness of the rear triangle matched with a more compact bottom bracket/front triangle design makes for a more flex free bottom bracket area, even without a chainstay brace. Those little "Bontrager-esque" gussets help here perhaps?

The Inbred cuts a corner with a little less input and a bit more precision than the KM. This is no doubt in part due to the different rake on the fork that On One uses, which quickens up the steering a bit over the "standard" 29"ers out there. The fork is quite compliant, giving a smoother ride. Not noodly, not throwing you off line, just not tooth-rattling stiff. It is a rigid fork, after all. The bike carves turns and also seems to behave very well under stomping up climbs and over very rough terrain. Single track is it's home. I can't find fault with it's handling. It's very much like my old Bontrager in this respect, which is high praise. That ol' Bontrager was awesome!

Other things of note: There isn't much to recommend this to touring cyclists, commuters, or the like. It's a purpose built mountain bike! The sliding drops are a bit troublesome. I have had the drive side slip forwards, as the provided chain tug is capable of flexing outwards and allowing the wheel to cock sideways in the frame. I have used an extreme amount of torque on the two allen bolts that fix the slider to the frame, but to no avail! I believe On One has a beefier tug coming out which should solve this problem for future owners of an Inbred. It also will be available separately for those of you already burdened with this problem.

Tomorrow, I will detail some of the parts highlights of these two bikes. Thanks for reading!

Please continue to give us feedback on the question I raised concerning Trans Iowa. Your feedback is very valuable to us! Thanks!

Karate Monkey vs. Inbred 29"er! Part II

Yesterday I introduced you to the two frames in question in this comparison. Today, I would like to give you my initial impressions that I gained from both bikes. I also will get into how they ride and handle tomorrow.


The bike that I had before I got my Karate Monkey in 2003 was a Bontrager Race hardtail. A Santa Cruz manufactured model. That was one sweet riding steel frame! So, the Karate Monkey and the Inbred had alot to live up to in terms of ride quality and handling.



When the Karate Monkey arrived, I was a bit dis appointed that the frame material was so heavy. Even though it's double butted steel, it was obviously thick walled steel. Giving the bike the old "ping" test, the sound was a lower, denser note. Not the high pitched "ting" of a fine steel tube set. (You old-skoolers will remember the "ping" test!) The weight on the scale beared this out. I won't give you an exact weight, since that really isn't what this is about. It's about the ride quality.

The Inbred, on the other hand, had that high pitched "ting" and was obviously lighter in the hand than the Monkey was. Another obvious difference was the gussets welded on the top tube/ down tube/ head tube junctions and the chainstay/ bottom bracket junctions. Very reminiscent of Bontragers work. The segmented seat stay arrangement was also a retro touch, being first noted on old De Kerf frames from back in the day. The most noticeable thing abot the Karate Monkey's frame was the bent seat tube, which tucks the rear wheel up under the rider more. Otherwise it's a pretty straight forward design, for a 29"er.

As far as braze ons, the Inbred has two bottle mounts, an interesting bolt on arrangement for rear brake studs that I left off because I run disc brakes, and not much else. The Monkey, on the other hand, has the brake studs, water bottle mounts, and rack and fender mounts.

The rear drop outs were different on each frame. The KM having track ends with slotted disc mounts, and a derailluer hangar. The Inbred has aluminum sliding dropouts with dual chain tensioners, integrated disc mount to the seat stay, and a derailluer hangar on the slider.

Once each frame was built up as a single speed with rigid forks, it was obvious that they cut two entirely different profiles. The Monkey has a decidedly old school flavor with the higher top tube/ less standover look. The Inbred is a severely sloping top tube, low standover design. This affects the way each frame rides. More on that later. Also noted that built up with similar parts, the Inbred was lighter, as expected. Not by a whole bunch, mind you, but it's noticeably lighter than the KM.

Okay, now you know the details on each frame. Tomorrow, I'll get into the ride quality, and how these frame details affect the way the frames handle and how they affect the usage of each frame.

Karate Monkey vs. Inbred 29"er! Part II

Yesterday I introduced you to the two frames in question in this comparison. Today, I would like to give you my initial impressions that I gained from both bikes. I also will get into how they ride and handle tomorrow.


The bike that I had before I got my Karate Monkey in 2003 was a Bontrager Race hardtail. A Santa Cruz manufactured model. That was one sweet riding steel frame! So, the Karate Monkey and the Inbred had alot to live up to in terms of ride quality and handling.



When the Karate Monkey arrived, I was a bit dis appointed that the frame material was so heavy. Even though it's double butted steel, it was obviously thick walled steel. Giving the bike the old "ping" test, the sound was a lower, denser note. Not the high pitched "ting" of a fine steel tube set. (You old-skoolers will remember the "ping" test!) The weight on the scale beared this out. I won't give you an exact weight, since that really isn't what this is about. It's about the ride quality.

The Inbred, on the other hand, had that high pitched "ting" and was obviously lighter in the hand than the Monkey was. Another obvious difference was the gussets welded on the top tube/ down tube/ head tube junctions and the chainstay/ bottom bracket junctions. Very reminiscent of Bontragers work. The segmented seat stay arrangement was also a retro touch, being first noted on old De Kerf frames from back in the day. The most noticeable thing abot the Karate Monkey's frame was the bent seat tube, which tucks the rear wheel up under the rider more. Otherwise it's a pretty straight forward design, for a 29"er.

As far as braze ons, the Inbred has two bottle mounts, an interesting bolt on arrangement for rear brake studs that I left off because I run disc brakes, and not much else. The Monkey, on the other hand, has the brake studs, water bottle mounts, and rack and fender mounts.

The rear drop outs were different on each frame. The KM having track ends with slotted disc mounts, and a derailluer hangar. The Inbred has aluminum sliding dropouts with dual chain tensioners, integrated disc mount to the seat stay, and a derailluer hangar on the slider.

Once each frame was built up as a single speed with rigid forks, it was obvious that they cut two entirely different profiles. The Monkey has a decidedly old school flavor with the higher top tube/ less standover look. The Inbred is a severely sloping top tube, low standover design. This affects the way each frame rides. More on that later. Also noted that built up with similar parts, the Inbred was lighter, as expected. Not by a whole bunch, mind you, but it's noticeably lighter than the KM.

Okay, now you know the details on each frame. Tomorrow, I'll get into the ride quality, and how these frame details affect the way the frames handle and how they affect the usage of each frame.

Karate Monkey vs. Inbred 29"er!

As promised, here is the first post on the comparisons between my Karate Monkey single speed and my On One Inbred 29"er single speed. Although both these bikes are set up as single speed bikes, they are very different from each other as far as the way they are spec'ed and in the geometry of each frame. I will not detail out every single difference in order to not bore you to tears. I will; however, take an opportunity to flesh out some of the highlights of specific parts on each bike. Parts that I feel I have performed admirably and deserve attention.









With that said, let's delve into the basics today. Here are our subjects submitted for your approval.

The Inbred 29"er: Steel hardtail frame with several interesting details. This one measures out to be an 18" frame, measured from the cnter of the bottom bracket to the top of the seat tube. The horizontal measurement of the top tube is 23.5". The frame tubing sticker says it's got "Multi Butted Steel Tubing" Hmm........okay! The frame is painted in a pleasant white with a slight hint of pearlescence.

The Karate Monkey: Steel hardtail frame with multi-purpose braze ons galore. It measures out to be a 22" frame if you use the same method for measuring as I did with the Inbred. (Surly calls this their 20" size, stopping their measurement at the top tube/ seat ube junction.) The top tube, measured like I did the Inbred's, is 24.5" long. The frame tubing sticker says "Double Butted 4130 Natch" mmmm.........riiiigggght! This frame is painted in the now out of production Camp Stove Green color.

Okay, you've been introduced to the two contenders. Next time I'll detail out the set up on the Karate Monkey. Then we'll look at the Inbred's set up. Finally, we'll get on to my impressions of both bikes. Thanks for stopping by today! Now, shut off this time sucking idiot box and go for a ride. (And if you are at work reading this......get back to work, slacker!) Ha !



P.S. The informal T.I. poll results are interpreted to say that you guys don't really care if we run T.I. every year or once every two years as long as we run it! Right?


Well, that's how I read it, anyway.

Karate Monkey vs. Inbred 29"er!

As promised, here is the first post on the comparisons between my Karate Monkey single speed and my On One Inbred 29"er single speed. Although both these bikes are set up as single speed bikes, they are very different from each other as far as the way they are spec'ed and in the geometry of each frame. I will not detail out every single difference in order to not bore you to tears. I will; however, take an opportunity to flesh out some of the highlights of specific parts on each bike. Parts that I feel I have performed admirably and deserve attention.









With that said, let's delve into the basics today. Here are our subjects submitted for your approval.

The Inbred 29"er: Steel hardtail frame with several interesting details. This one measures out to be an 18" frame, measured from the cnter of the bottom bracket to the top of the seat tube. The horizontal measurement of the top tube is 23.5". The frame tubing sticker says it's got "Multi Butted Steel Tubing" Hmm........okay! The frame is painted in a pleasant white with a slight hint of pearlescence.

The Karate Monkey: Steel hardtail frame with multi-purpose braze ons galore. It measures out to be a 22" frame if you use the same method for measuring as I did with the Inbred. (Surly calls this their 20" size, stopping their measurement at the top tube/ seat ube junction.) The top tube, measured like I did the Inbred's, is 24.5" long. The frame tubing sticker says "Double Butted 4130 Natch" mmmm.........riiiigggght! This frame is painted in the now out of production Camp Stove Green color.

Okay, you've been introduced to the two contenders. Next time I'll detail out the set up on the Karate Monkey. Then we'll look at the Inbred's set up. Finally, we'll get on to my impressions of both bikes. Thanks for stopping by today! Now, shut off this time sucking idiot box and go for a ride. (And if you are at work reading this......get back to work, slacker!) Ha !



P.S. The informal T.I. poll results are interpreted to say that you guys don't really care if we run T.I. every year or once every two years as long as we run it! Right?


Well, that's how I read it, anyway.

The People Have Spoken: T.I.V2 Fallout

Okay, here it is. The responses have been read and considered. The truth has been ferreted out. All this and a question from your humble race directors for you to consider.

On possible changes to the race format, rules, etc... It's been a pretty overwhelming vote for no changes. This was carefully looked at but in the end it was obvious to me that of the people who said that they would definitely come back, the vote was for no changes. If all Jeff and I did was listen to you: the racers, and implemented what you wanted, the majority of the responses would carry the day. Well, we do value your input, but we also have our own feelings on the matter. We just so happen to agree with the majority of the responses so far.

The T.I.V2 story: What really happened! It's always fun to get all the racer responses and get the pieces of the mosaic together so you can get a true read on the story of Trans Iowa. Last years event didn't get cleared up for me until just a couple of months ago! This time, I think it is pretty clear already. That is mostly due to the transparency of the racers responses this time. My main aim was that the true tail of the end of the event get straightened out, and it has been. I think everyone knows by now that Dallas Sigurdur and Lindsay Gauld were the furthest up the road at 7pm. when Lindsay called me from Mallard. After Lindsay found out from me that we were sending everyone home, he took that to mean that Paddy would be the only one in Algona waiting on them. He was wanting there to be a crowd of people to see their accomplishment. So, he decided to pull the plug, although I had said that Jeff and I would wait. Apparently, Lindsay didn't catch that, and in the end, Dallas and Lindsay made it to West Bend where Paddy picked them up. Of course, none of that mattered in the scheme of things concerning Trans Iowa, as that was over at 6pm. when no one showed up on time riding their bike to make the cut off. My guess is that Lindsay and Dallas were within about 50 miles of Algona at the cutoff.

A question for anyone considering Trans Iowa: Jeff and I are wondering if it might not be a bad idea to let the race lay dormant for a year. The thought being that perhaps the event has lost it's shine with an "annual approach" and that maybe we should be semi-annual so that people don't get burned out trying to make it every year. You know, coming to T.I. every year might be a bit much for folks and if it were run semi-annually then folks have a break to try other things and have excitement to try T.I. again when it's date comes around again. Kind of like Paris-Brest-Paris, which is once every four years if I'm not mistaken. What do ya'all think? No changes to the event itself! Just when the event is run is being looked at here.

Okay, that's it! Sound off! All of your input is considered and welcomed even if it's negative or if we don't agree with it. If'n ya don't speak up, then that's on you!

We still have not decided if we will run the event next year or not. T.I. is a huge undertaking for Jeff and I. Also, you just don't know where life is going to take us next. There is a certain "perfect storm" about this that could be upset by the slightest change. Stay tuned! Keep commenting if you want it back and we'll talk more about it in the fall. Thanks to all the racers and all the sponsors! You guys are awesome.

The People Have Spoken: T.I.V2 Fallout

Okay, here it is. The responses have been read and considered. The truth has been ferreted out. All this and a question from your humble race directors for you to consider.

On possible changes to the race format, rules, etc... It's been a pretty overwhelming vote for no changes. This was carefully looked at but in the end it was obvious to me that of the people who said that they would definitely come back, the vote was for no changes. If all Jeff and I did was listen to you: the racers, and implemented what you wanted, the majority of the responses would carry the day. Well, we do value your input, but we also have our own feelings on the matter. We just so happen to agree with the majority of the responses so far.

The T.I.V2 story: What really happened! It's always fun to get all the racer responses and get the pieces of the mosaic together so you can get a true read on the story of Trans Iowa. Last years event didn't get cleared up for me until just a couple of months ago! This time, I think it is pretty clear already. That is mostly due to the transparency of the racers responses this time. My main aim was that the true tail of the end of the event get straightened out, and it has been. I think everyone knows by now that Dallas Sigurdur and Lindsay Gauld were the furthest up the road at 7pm. when Lindsay called me from Mallard. After Lindsay found out from me that we were sending everyone home, he took that to mean that Paddy would be the only one in Algona waiting on them. He was wanting there to be a crowd of people to see their accomplishment. So, he decided to pull the plug, although I had said that Jeff and I would wait. Apparently, Lindsay didn't catch that, and in the end, Dallas and Lindsay made it to West Bend where Paddy picked them up. Of course, none of that mattered in the scheme of things concerning Trans Iowa, as that was over at 6pm. when no one showed up on time riding their bike to make the cut off. My guess is that Lindsay and Dallas were within about 50 miles of Algona at the cutoff.

A question for anyone considering Trans Iowa: Jeff and I are wondering if it might not be a bad idea to let the race lay dormant for a year. The thought being that perhaps the event has lost it's shine with an "annual approach" and that maybe we should be semi-annual so that people don't get burned out trying to make it every year. You know, coming to T.I. every year might be a bit much for folks and if it were run semi-annually then folks have a break to try other things and have excitement to try T.I. again when it's date comes around again. Kind of like Paris-Brest-Paris, which is once every four years if I'm not mistaken. What do ya'all think? No changes to the event itself! Just when the event is run is being looked at here.

Okay, that's it! Sound off! All of your input is considered and welcomed even if it's negative or if we don't agree with it. If'n ya don't speak up, then that's on you!

We still have not decided if we will run the event next year or not. T.I. is a huge undertaking for Jeff and I. Also, you just don't know where life is going to take us next. There is a certain "perfect storm" about this that could be upset by the slightest change. Stay tuned! Keep commenting if you want it back and we'll talk more about it in the fall. Thanks to all the racers and all the sponsors! You guys are awesome.

Sunday Morning Edition

Local XC Race Today: The Camp Ingawanis XC race is being held today. The event, which is part of the State of Iowa's XC series, is promoted and produced by Carl Buchanan and a few other volunteers. Great job, Carl, on getting the Camp trails readied for this event! Look for reports on today's goings on at Jeff Kerkove's blog and Carl's blog later.

Karate Monkey vs. Inbred 29"er: I own both of these very popular, budget priced, steel hardtail 29"er frames. I have both set up as single speeds. I thought it might be fun to run a comparison on the two bikes here on my blog. Look for that coming up in a few days.

Some of the specific parts that I have fitted to each of these frames will get special mentions as they may be of interest to some of you out there. I will probably be giving some breakdowns on those parts as well.

Raliegh Introduces It's 29"er: On May 10th, Raliegh will be introducing it's '07 lineup to dealers at a show/ meeting in Chicago. During the intro, we should get our first glimpse of the rumored 29" single speed steel hardtail. Their might even be news of another 29" wheeled model, as well. The shop I work for just happens to be a Raliegh dealer, so who knows.....I may be getting a closer look at one of these!

Trans Iowa Fall-out: Seems that there was just a bit of confusion about the way Trans Iowa ended this year. Also, a certain faction of the riders had a suggestion for a change to the format of the event to deal with inclement weather. I will address both issues in one post coming up this week.

Also, some of the bikes of this years Trans Iowa V2 were pretty interesting. Look for a breakdown of that either here or on mtbr.com. (If I can get all the pics re-sized for mtbr's format)

Speaking of T.I.V2, does anybody notice how the weather the week before the event and the weather the week after the event has been perfect? Hmm.................

Dirty Kanza Preparations: I'll be getting ready to go to participate in the Dirty Kanza 200 on May, 20th. Look for a couple posts related to that in the next couple weeks. The "Sea of Green, Grassy Hills" is what this area should be called! I've driven through the area a couple times, and the hills are impressive. It's the only other place on earth, besides the Serengeti Plains, where tall grass prarie is to be found. It's true, they have alot of grass and zero trees! That means wind, my friends and that along with some 10,000 feet of climbing should prove to be super tough!

Okay, that's it for today! Have a great ending to your weekend, and ride your bike! Don't like gas prices? Ride your bike some more! See you all later!

Sunday Morning Edition

Local XC Race Today: The Camp Ingawanis XC race is being held today. The event, which is part of the State of Iowa's XC series, is promoted and produced by Carl Buchanan and a few other volunteers. Great job, Carl, on getting the Camp trails readied for this event! Look for reports on today's goings on at Jeff Kerkove's blog and Carl's blog later.

Karate Monkey vs. Inbred 29"er: I own both of these very popular, budget priced, steel hardtail 29"er frames. I have both set up as single speeds. I thought it might be fun to run a comparison on the two bikes here on my blog. Look for that coming up in a few days.

Some of the specific parts that I have fitted to each of these frames will get special mentions as they may be of interest to some of you out there. I will probably be giving some breakdowns on those parts as well.

Raliegh Introduces It's 29"er: On May 10th, Raliegh will be introducing it's '07 lineup to dealers at a show/ meeting in Chicago. During the intro, we should get our first glimpse of the rumored 29" single speed steel hardtail. Their might even be news of another 29" wheeled model, as well. The shop I work for just happens to be a Raliegh dealer, so who knows.....I may be getting a closer look at one of these!

Trans Iowa Fall-out: Seems that there was just a bit of confusion about the way Trans Iowa ended this year. Also, a certain faction of the riders had a suggestion for a change to the format of the event to deal with inclement weather. I will address both issues in one post coming up this week.

Also, some of the bikes of this years Trans Iowa V2 were pretty interesting. Look for a breakdown of that either here or on mtbr.com. (If I can get all the pics re-sized for mtbr's format)

Speaking of T.I.V2, does anybody notice how the weather the week before the event and the weather the week after the event has been perfect? Hmm.................

Dirty Kanza Preparations: I'll be getting ready to go to participate in the Dirty Kanza 200 on May, 20th. Look for a couple posts related to that in the next couple weeks. The "Sea of Green, Grassy Hills" is what this area should be called! I've driven through the area a couple times, and the hills are impressive. It's the only other place on earth, besides the Serengeti Plains, where tall grass prarie is to be found. It's true, they have alot of grass and zero trees! That means wind, my friends and that along with some 10,000 feet of climbing should prove to be super tough!

Okay, that's it for today! Have a great ending to your weekend, and ride your bike! Don't like gas prices? Ride your bike some more! See you all later!

Salsa Introduces The Production El Mariachi

Oh crap! I hate it when companies introduce fine steel hardtail 29"ers. Especially when they are geared compatible, non-goofy drop out frames. So what does Salsa do? They come up with this, the El Mariachi. Thanks! Now I've got that to drool over!

Okay, here are the details. Bushnell EBB for single speeding. True Temper OX tubing for that classic steel feel. Disc only to keep it clean looking. (Sorry traditionalists!) Hose guides on the fork and seat stay to keep things all neat and tidy. Oh, and this color, which you will note is not a shade of green! ( Green being the unofficial 29"er standard color, but wait!) .........yes! It's also available in a shade of green! It's called Tomatilla Green, which is pastel green for all you reg-lur folks out there! I only show you the Superior Blue hue as an example to point out that you do not have to have a green production 29"er. (Thanks to Haro for some creative color choices on the Mary 29"ers, as well)

Price? $880 American doe-lars amigo! Available in late June/ July. Hmm............maybe I can start making some extra moo-lah by mowing some lawns, eh?

Thanks Salsa Crew! You just trashed my budget plans! Crap!

Salsa Introduces The Production El Mariachi

Oh crap! I hate it when companies introduce fine steel hardtail 29"ers. Especially when they are geared compatible, non-goofy drop out frames. So what does Salsa do? They come up with this, the El Mariachi. Thanks! Now I've got that to drool over!

Okay, here are the details. Bushnell EBB for single speeding. True Temper OX tubing for that classic steel feel. Disc only to keep it clean looking. (Sorry traditionalists!) Hose guides on the fork and seat stay to keep things all neat and tidy. Oh, and this color, which you will note is not a shade of green! ( Green being the unofficial 29"er standard color, but wait!) .........yes! It's also available in a shade of green! It's called Tomatilla Green, which is pastel green for all you reg-lur folks out there! I only show you the Superior Blue hue as an example to point out that you do not have to have a green production 29"er. (Thanks to Haro for some creative color choices on the Mary 29"ers, as well)

Price? $880 American doe-lars amigo! Available in late June/ July. Hmm............maybe I can start making some extra moo-lah by mowing some lawns, eh?

Thanks Salsa Crew! You just trashed my budget plans! Crap!

Caught Speeding

I've been having a struggle lately that some of you might just be able to relate to. Speeding. Yep! Things going too fast........waaay too fast! (And you thought I was talkin' about cars!) Nah, just the speed of life, you know.........it's spring, you get busy........hey! It's fall again already! Where did the time go?

So, I was contemplating all of this when it occurred to me. Maybe the reason I'm getting excited about this 200 mile torture rack called Dirty Kanza is because I know that things will slow down a bit. They will slow down too much, probably. The moments of head wind and hill climb, over and over again, will become so focused and seem so long. It will drive away all else and become a sort of twisted place of peace from all the mayhem of normal life. Life that flashes by and leaves you sucked dry. Like a wrinkled skin of a mouse after a tarantulas feasting. Nothing but an empty sack!

That focused pain. The suffering that is so "loud" and intense that it becomes everything for a moment or two. It's the only thing you've got to overcome. The one thing. Not a million other things like mowing the grass, fixing the window, getting bills paid on time, or worrying about what your spouse might think. No, it's just you and that familiar pain. Can you deal with it now. Just that one thing and that's all that matters. No speeding. Life stands still for one glorious moment.

Is this what it is that makes my mind focus on this event and nothing beyond that? I don't know for sure, but I know why I'll be sad when it's over, whether I finish the course or not.

It'll be as though it went by too fast. Here and gone. Speeding!

Caught Speeding

I've been having a struggle lately that some of you might just be able to relate to. Speeding. Yep! Things going too fast........waaay too fast! (And you thought I was talkin' about cars!) Nah, just the speed of life, you know.........it's spring, you get busy........hey! It's fall again already! Where did the time go?

So, I was contemplating all of this when it occurred to me. Maybe the reason I'm getting excited about this 200 mile torture rack called Dirty Kanza is because I know that things will slow down a bit. They will slow down too much, probably. The moments of head wind and hill climb, over and over again, will become so focused and seem so long. It will drive away all else and become a sort of twisted place of peace from all the mayhem of normal life. Life that flashes by and leaves you sucked dry. Like a wrinkled skin of a mouse after a tarantulas feasting. Nothing but an empty sack!

That focused pain. The suffering that is so "loud" and intense that it becomes everything for a moment or two. It's the only thing you've got to overcome. The one thing. Not a million other things like mowing the grass, fixing the window, getting bills paid on time, or worrying about what your spouse might think. No, it's just you and that familiar pain. Can you deal with it now. Just that one thing and that's all that matters. No speeding. Life stands still for one glorious moment.

Is this what it is that makes my mind focus on this event and nothing beyond that? I don't know for sure, but I know why I'll be sad when it's over, whether I finish the course or not.

It'll be as though it went by too fast. Here and gone. Speeding!