Salsa Cycles Fargo Page
Wednesday, December 13, 2006
The Irony of the "Governing Bodies"
Operacion Puerto, the Pro Tour/UCI squabble, and WADA/ anti-doping crap has dominated the pro cycling news on the road side for well over a year now. If you are not familiar with what is going on there, than I suggest you not sully your fervor and joy for cycling by wading into that morass. Suffice it to say that it's a total buzzkill for that facet of the sport of cycling and they have lost one fan in myself, who can not stomach the madness anymore.
Now I see that the thing that I have predicted and feared for off road, ultra endurance cycling is now being "officially" proposed. That being a world governing body to oversee the "growth" of the sport. (Read "growth" as "shivering, cruel death of the sport")
Okay, let me get this straight. Somebody is seriously considering oversight of all of the different facets and flavors of off road ultra endurance cycling events. What.........so we can eventually have our own fiasco, like road cycling has? Umm......lemme think about this for awhile.....NOPE!! Not going there, thank you very much for wasting everyone's time!
I can't believe that in the shadow of a knock down, drag out fist fight, that has all but brought down pro road cycling to it's knees, that this proposal of enlightened guidance would be proffered. It's rediculous, to say the least. Even if it doesn't have a thing to do with the UCI or Pro Tour entities. Look at what has happened in our own country, (U.S.A.) We have the farce that is NORBA and U.S.A.Cycling. The "governing bodies" that have made participating in cycling here such an inviting proposistion that entire rogue racing series have sprung up and thrived from without their shadow of influence.
A governing body for Ultra Endurance cycling..........puh-leeze! Hey, we're having a bunch of fun, don't try ruining it all with your idea of what we are about. No thanks.
You can bet Trans Iowa will never be part of that kind of circus!
(This brought to you in part by Mr. 24 and Guitar Ted, Trans Iowa "Dictators for Life")
The Irony of the "Governing Bodies"
Operacion Puerto, the Pro Tour/UCI squabble, and WADA/ anti-doping crap has dominated the pro cycling news on the road side for well over a year now. If you are not familiar with what is going on there, than I suggest you not sully your fervor and joy for cycling by wading into that morass. Suffice it to say that it's a total buzzkill for that facet of the sport of cycling and they have lost one fan in myself, who can not stomach the madness anymore.
Now I see that the thing that I have predicted and feared for off road, ultra endurance cycling is now being "officially" proposed. That being a world governing body to oversee the "growth" of the sport. (Read "growth" as "shivering, cruel death of the sport")
Okay, let me get this straight. Somebody is seriously considering oversight of all of the different facets and flavors of off road ultra endurance cycling events. What.........so we can eventually have our own fiasco, like road cycling has? Umm......lemme think about this for awhile.....NOPE!! Not going there, thank you very much for wasting everyone's time!
I can't believe that in the shadow of a knock down, drag out fist fight, that has all but brought down pro road cycling to it's knees, that this proposal of enlightened guidance would be proffered. It's rediculous, to say the least. Even if it doesn't have a thing to do with the UCI or Pro Tour entities. Look at what has happened in our own country, (U.S.A.) We have the farce that is NORBA and U.S.A.Cycling. The "governing bodies" that have made participating in cycling here such an inviting proposistion that entire rogue racing series have sprung up and thrived from without their shadow of influence.
A governing body for Ultra Endurance cycling..........puh-leeze! Hey, we're having a bunch of fun, don't try ruining it all with your idea of what we are about. No thanks.
You can bet Trans Iowa will never be part of that kind of circus!
(This brought to you in part by Mr. 24 and Guitar Ted, Trans Iowa "Dictators for Life")
Tuesday, December 12, 2006
Dos Niner in the House

Early Christmas at the Guitar Ted Labratories? Nah, but it would seem so, as this Dos Niner is here from Salsa Cycles for a long term test. Thanks guys!
One disadvantage to the big wheels: they don't fit underneath your standard Christmas tree!

A close up of the paint and graphics. I love orange and this design is hot, hot, hot!
It's got some nice metallic sparkle there!

The thing that sets this bike off from all the others: The Relish damper unit. The Dos Niner is a soft tail design that relies on the flex of the chainstays to act as a spring and this damper unit helps keep all that "boing" under control. You can also use the damper to add additional spring stiffness to the design to the point that it is essentially "locked out" if you wanted to, but why? Seems counter intuitive since then you have what would amount to a hardtail. With that in mind, you don't need much pressure in this unit. I will be running mine at about 0 - 20 psi for this test to see how it reacts.
The other interesting thing about this frame is that it's got a Scandium enhanced aluminum alloy through out. Meaning that it's just not the three main tubes, but the whole frame that is made of the stuff. Scandium is there to allow for better strength and lighter weight by design. I'll get into that more later.
For now I just wanted to introduce ya'all to one fine looking 29"er that'll be around for awhile. I'll be keeping you all updated as to how she rides and how it works in varying types of terrain and conditions. Thanks again to Salsa Cycles for this incredible bike and the opportunity to ride it.
Dos Niner in the House

Early Christmas at the Guitar Ted Labratories? Nah, but it would seem so, as this Dos Niner is here from Salsa Cycles for a long term test. Thanks guys!
One disadvantage to the big wheels: they don't fit underneath your standard Christmas tree!

A close up of the paint and graphics. I love orange and this design is hot, hot, hot!
It's got some nice metallic sparkle there!

The thing that sets this bike off from all the others: The Relish damper unit. The Dos Niner is a soft tail design that relies on the flex of the chainstays to act as a spring and this damper unit helps keep all that "boing" under control. You can also use the damper to add additional spring stiffness to the design to the point that it is essentially "locked out" if you wanted to, but why? Seems counter intuitive since then you have what would amount to a hardtail. With that in mind, you don't need much pressure in this unit. I will be running mine at about 0 - 20 psi for this test to see how it reacts.
The other interesting thing about this frame is that it's got a Scandium enhanced aluminum alloy through out. Meaning that it's just not the three main tubes, but the whole frame that is made of the stuff. Scandium is there to allow for better strength and lighter weight by design. I'll get into that more later.
For now I just wanted to introduce ya'all to one fine looking 29"er that'll be around for awhile. I'll be keeping you all updated as to how she rides and how it works in varying types of terrain and conditions. Thanks again to Salsa Cycles for this incredible bike and the opportunity to ride it.
Monday, December 11, 2006
Post Cards Must Be In By Friday!
As for the possibility of a lottery, well I didn't think it was going to happen, but with the amount of new people registering on Friday and Saturday, that possibility is much more possible. As it stood on Saturday, there were 68 different names in the hat, and I know there are more coming. Now if there are 32 more individuals or not, I don't know, but it's going to be pretty close. Keep in mind that in two days we got 18 new names in the hat, so it's quite possible that folks are waiting until the last minute to get their cards off.
Don't wait too long though, we are not accepting anything past this Friday the 15th. If your mail is late, then too bad! Also, it has to be on a post card! We don't care if that card is in a huge box, an envelope, or sent regular style, but it has to be a post card. No spiral bound note book paper, no three ring binder paper entries, okay? (We actually got some of those) They are going to be rejected. Hey! All you had to do was to follow the rules people. The rules say "post card".
Okay! The suspense is building. This Friday is "D" day. It's going to get interesting!
Post Cards Must Be In By Friday!
As for the possibility of a lottery, well I didn't think it was going to happen, but with the amount of new people registering on Friday and Saturday, that possibility is much more possible. As it stood on Saturday, there were 68 different names in the hat, and I know there are more coming. Now if there are 32 more individuals or not, I don't know, but it's going to be pretty close. Keep in mind that in two days we got 18 new names in the hat, so it's quite possible that folks are waiting until the last minute to get their cards off.
Don't wait too long though, we are not accepting anything past this Friday the 15th. If your mail is late, then too bad! Also, it has to be on a post card! We don't care if that card is in a huge box, an envelope, or sent regular style, but it has to be a post card. No spiral bound note book paper, no three ring binder paper entries, okay? (We actually got some of those) They are going to be rejected. Hey! All you had to do was to follow the rules people. The rules say "post card".
Okay! The suspense is building. This Friday is "D" day. It's going to get interesting!
Sunday, December 10, 2006
Blogger Tag?
Amazing!
Anyway, I got "tagged" here, so I'm supposed to comply, or.......... Funny, but they never did say what might happen if I don't play, did they? Hmmm.............well, just for the fun of it, I'll post six "interesting" things about myself and see what happens. Okay?
#1. Guitar Ted: Yeah, that's probably the #1 question I get asked: "Where did this "Guitar Ted" thing come from" Well, it's a long story about heart ache and the loss of God and all, but it has something to do with Ted Nugent and my love of guitar playing. If you really want to know, I think my very first blog post tells the story. Now....off to the archives with you!
#2. And about that guitar playing....: Yes, I do indeed play guitar. I own several, and I also already posted about that. Now....off to the archives with you!
#3. Trans Iowa: Yep, you guessed it! Now, off to the archives with you!
#4. Okay smarty pants! What about something we don't know!: Okay, okay! I'll try to play nice! How about this: I used to design and make jewelery for a living for ten years. I repaired jewelery, set stones, and graded diamonds. Yep! I even wore $500.00 suits everyday and wore out at least two of them a year, since I practically lived in the things. Laundry services, shoes, ties, etc.....it all cost me alot of $$$. And you guys thought cycling was expensive?.......psshaww!
#5. You? In a suit and tie?: Yeah, hard to believe, isn't it? I went from that right into being a bicycle mechanic until the shop I worked at went under, and then I spent five and a half years working for The Darkside as a car mechanic! Greasy, grimy, gritty, and generally unpleasant, I still am thankfull for the owner and the guys I worked along side of. They were great! But I am glad that part of my life is behind me now!
#6. And now you're back in a bike shop?: Yep! And lovin' it, for the most part. While the pay for a mechanic stinks and the work hours get cut in the off season, I still love working in a bike shop. Sure, I could make more money doing something else tomorrow, if I wanted to, but for right now, this is a good thing. Who knows? Maybe I'll be doing something else a year from now. Besides, I love bicycles and being around that, so a shop is a good place to be, right?
Okay, so there you have it. Six mildly interesting....or inane, depending on your viewpoint...things about me. But enough about me. What about you?
Consider yourself tagged!
Blogger Tag?
Amazing!
Anyway, I got "tagged" here, so I'm supposed to comply, or.......... Funny, but they never did say what might happen if I don't play, did they? Hmmm.............well, just for the fun of it, I'll post six "interesting" things about myself and see what happens. Okay?
#1. Guitar Ted: Yeah, that's probably the #1 question I get asked: "Where did this "Guitar Ted" thing come from" Well, it's a long story about heart ache and the loss of God and all, but it has something to do with Ted Nugent and my love of guitar playing. If you really want to know, I think my very first blog post tells the story. Now....off to the archives with you!
#2. And about that guitar playing....: Yes, I do indeed play guitar. I own several, and I also already posted about that. Now....off to the archives with you!
#3. Trans Iowa: Yep, you guessed it! Now, off to the archives with you!
#4. Okay smarty pants! What about something we don't know!: Okay, okay! I'll try to play nice! How about this: I used to design and make jewelery for a living for ten years. I repaired jewelery, set stones, and graded diamonds. Yep! I even wore $500.00 suits everyday and wore out at least two of them a year, since I practically lived in the things. Laundry services, shoes, ties, etc.....it all cost me alot of $$$. And you guys thought cycling was expensive?.......psshaww!
#5. You? In a suit and tie?: Yeah, hard to believe, isn't it? I went from that right into being a bicycle mechanic until the shop I worked at went under, and then I spent five and a half years working for The Darkside as a car mechanic! Greasy, grimy, gritty, and generally unpleasant, I still am thankfull for the owner and the guys I worked along side of. They were great! But I am glad that part of my life is behind me now!
#6. And now you're back in a bike shop?: Yep! And lovin' it, for the most part. While the pay for a mechanic stinks and the work hours get cut in the off season, I still love working in a bike shop. Sure, I could make more money doing something else tomorrow, if I wanted to, but for right now, this is a good thing. Who knows? Maybe I'll be doing something else a year from now. Besides, I love bicycles and being around that, so a shop is a good place to be, right?
Okay, so there you have it. Six mildly interesting....or inane, depending on your viewpoint...things about me. But enough about me. What about you?
Consider yourself tagged!
Saturday, December 09, 2006
More Trans Iowa Recon
Well, all I can say is, we need more practice time! As for the course, it's looking really great. I traveled 3.5 miles of "B" Level maintenance road today that is the most awesome "B" road stuff we have ever used. Quite hilly terrain actually. It's going to probably be in the night time section of the event, so it should be even more epic than ever.
The gravel is, for the most part, all recently maintained and the roads were pretty much covered with chunky gravel. Lots of dust too, so hacked throats and scratchy eyes might be a problem if the weather is at all dry. It's pretty windy today, as well, so I got a feel for what that might bring to the event. One thing is for sure, if it rains a bunch, we'll most likely be good, with the exception of the "B" stuff, but even that should be better, and there is going to be far less of it in this edition than there was last year. Don't get your hopes up, I replaced all that "B" stuff with something perhaps even worse! You'll see!
No pictures today, my cameras batteries went down while I was out there. Perhaps a couple of shots might turn up later. Besides, I wouldn't want anyone to figure out where we are going, ya know?
More updates later, stay tuned!
More Trans Iowa Recon
Well, all I can say is, we need more practice time! As for the course, it's looking really great. I traveled 3.5 miles of "B" Level maintenance road today that is the most awesome "B" road stuff we have ever used. Quite hilly terrain actually. It's going to probably be in the night time section of the event, so it should be even more epic than ever.
The gravel is, for the most part, all recently maintained and the roads were pretty much covered with chunky gravel. Lots of dust too, so hacked throats and scratchy eyes might be a problem if the weather is at all dry. It's pretty windy today, as well, so I got a feel for what that might bring to the event. One thing is for sure, if it rains a bunch, we'll most likely be good, with the exception of the "B" stuff, but even that should be better, and there is going to be far less of it in this edition than there was last year. Don't get your hopes up, I replaced all that "B" stuff with something perhaps even worse! You'll see!
No pictures today, my cameras batteries went down while I was out there. Perhaps a couple of shots might turn up later. Besides, I wouldn't want anyone to figure out where we are going, ya know?
More updates later, stay tuned!
Friday, December 08, 2006
It's All About Momentum
I am aware of a study that Mavic had done concerning climbing speeds and wheel weight. The hypothesis going into the study was that a lighter wheelset would climb at a consistently higher speed than a heavier wheelset and thus would cut overall climbing times. What they actually observed was something very surprising.
The study was done on a long mountain climb on a paved road using road tires on road bikes. The test pool was a large group of cyclotourists numbering into the hundreds. (Some of these details are cloudy in my memory, but the overall point is not) At any rate, Mavic officials saw that overall speeds were not increasing as they had expected they would. What they did see was that the extremely light wheels caused the riders to lose their momentum between pedal strokes! The riders basically were having to re-accelerate the wheel with every downward push on the pedals, while the riders on the heavier wheels were able to escape this plague because their wheels held their momentum through the cyclists pedaling "dead spots". In the final results, the heavier wheelsets, (to a point) were actually faster than the lighter weight ones!
Now I see that this phenomenon has been observed again by cyclingnews.com testers concerning a lightweight set of Fulcrum carbon clinchers. Here is the pertinent paragraph:
"On the flipside, I did notice that these wheels exhibited less of a flywheel effect. Once spun up, slightly more effort was required to keep them spinning, unlike heavier wheels, whose rotational inertia tends to keep them going. An extension of this phenomenon was that the RacingLights were a little flighty on fast (60+km/h) descents, especially if the road surface was rough. This was not a nice feeling the first time I experienced it - it reminded me of skateboard death wobbles. Heavier wheels do provide more stability through the gyroscopic effect. Speaking of descending, the modestly aero spokes were also faster than I expected - noticeable faster than my conventionally spoked low profile clinchers. "
So, as you can see, having momentum, or a "flywheel effect" is not a bad thing, necessarily, and if you know your wheels have this effect, then you can use it to your advantage. This is one of the nice things about 29 inch wheels. Yes, they may be a bit harder to spin off a dead, or nearly dead start, but once up to speed, they tend to keep that speed. Couple that with the higher degree of traction and stability over 26 inch wheels and you might find that you are braking less and getting through the corners faster which will carry more momentum and save you more energy. This is also the reason why 29"ers tend to "walk away" from 26"ers on downhills.
It's all about the momentum. Get yer self some!
It's All About Momentum
I am aware of a study that Mavic had done concerning climbing speeds and wheel weight. The hypothesis going into the study was that a lighter wheelset would climb at a consistently higher speed than a heavier wheelset and thus would cut overall climbing times. What they actually observed was something very surprising.
The study was done on a long mountain climb on a paved road using road tires on road bikes. The test pool was a large group of cyclotourists numbering into the hundreds. (Some of these details are cloudy in my memory, but the overall point is not) At any rate, Mavic officials saw that overall speeds were not increasing as they had expected they would. What they did see was that the extremely light wheels caused the riders to lose their momentum between pedal strokes! The riders basically were having to re-accelerate the wheel with every downward push on the pedals, while the riders on the heavier wheels were able to escape this plague because their wheels held their momentum through the cyclists pedaling "dead spots". In the final results, the heavier wheelsets, (to a point) were actually faster than the lighter weight ones!
Now I see that this phenomenon has been observed again by cyclingnews.com testers concerning a lightweight set of Fulcrum carbon clinchers. Here is the pertinent paragraph:
"On the flipside, I did notice that these wheels exhibited less of a flywheel effect. Once spun up, slightly more effort was required to keep them spinning, unlike heavier wheels, whose rotational inertia tends to keep them going. An extension of this phenomenon was that the RacingLights were a little flighty on fast (60+km/h) descents, especially if the road surface was rough. This was not a nice feeling the first time I experienced it - it reminded me of skateboard death wobbles. Heavier wheels do provide more stability through the gyroscopic effect. Speaking of descending, the modestly aero spokes were also faster than I expected - noticeable faster than my conventionally spoked low profile clinchers. "
So, as you can see, having momentum, or a "flywheel effect" is not a bad thing, necessarily, and if you know your wheels have this effect, then you can use it to your advantage. This is one of the nice things about 29 inch wheels. Yes, they may be a bit harder to spin off a dead, or nearly dead start, but once up to speed, they tend to keep that speed. Couple that with the higher degree of traction and stability over 26 inch wheels and you might find that you are braking less and getting through the corners faster which will carry more momentum and save you more energy. This is also the reason why 29"ers tend to "walk away" from 26"ers on downhills.
It's all about the momentum. Get yer self some!
Thursday, December 07, 2006
Reasons For "The Rule"
When the ambient air temperature is above zero and there is little to no wind chill, I ride. If the ambient air temperature is below 10 degrees and there is a significant wind chill, then I'm driving.
Why? Because I'm stupid, but not that stupid. I own a car. I do not have to ride. If it's dangerous to ride, then I don't. I am looking at riding well into my elderly years and cutting that short by being the "tough guy" and riding when it's 3 degrees outside with a stiff 15-20 mph. head wind is not going to further that cause.
I suppose I could get outfitted with all that specialty cold weather gear that folks use in the Artic to cycle with but honestly, I would use it so little that it wouldn't make sense to me to have it. This doesn't happen a whole lot: I might miss a handfull of commutes a year because of it, so it's no big deal to me.
Besides, my body can use the break now and then. It's good to rest. I think Mr.24 may have stole this quote somewhere, but I attribute it to him: "Rest as hard as you train." Makes sense to me! (By the way, Mr. 24 got himself a new squadra for '07. Did ya see?)
Then again, my wife is a Registered Nurse, so she is quite familiar with the effects of wind chill on the human body. She also wants me around in good health for herself and to help raise our two kids. Women can be that way, if ya know what I mean, and it's probably a good thing for me.
I suppose that's the real reason I'm not going to ride to work today...........
........and I'm good with that!
Reasons For "The Rule"
When the ambient air temperature is above zero and there is little to no wind chill, I ride. If the ambient air temperature is below 10 degrees and there is a significant wind chill, then I'm driving.
Why? Because I'm stupid, but not that stupid. I own a car. I do not have to ride. If it's dangerous to ride, then I don't. I am looking at riding well into my elderly years and cutting that short by being the "tough guy" and riding when it's 3 degrees outside with a stiff 15-20 mph. head wind is not going to further that cause.
I suppose I could get outfitted with all that specialty cold weather gear that folks use in the Artic to cycle with but honestly, I would use it so little that it wouldn't make sense to me to have it. This doesn't happen a whole lot: I might miss a handfull of commutes a year because of it, so it's no big deal to me.
Besides, my body can use the break now and then. It's good to rest. I think Mr.24 may have stole this quote somewhere, but I attribute it to him: "Rest as hard as you train." Makes sense to me! (By the way, Mr. 24 got himself a new squadra for '07. Did ya see?)
Then again, my wife is a Registered Nurse, so she is quite familiar with the effects of wind chill on the human body. She also wants me around in good health for herself and to help raise our two kids. Women can be that way, if ya know what I mean, and it's probably a good thing for me.
I suppose that's the real reason I'm not going to ride to work today...........
........and I'm good with that!
Wednesday, December 06, 2006
Wednesday News and Views

Did I ever mention that I got to ride this bike off road and that it rules!
Look for this frame to become available next spring and then watch it become one of the top XC 29"er hardtails of '07.
Yes......it's that good!
I just completed a review on the F-29 Cannondale Caffeine hardtail for Twenty Nine Inches which details my thoughts on that hardtail 29"er. Go read the review. I will only say here that it is a very different hardtail than most that I have had the pleasure to ride and it's definitely not a "me too" design. It's got a very different personality which may or may not appeal to you. I think it's a smart decision on Cannondales part because it definitely sets their bike apart from the "crowd", if you can call the geared only 29"er hardtail market a crowd.
The post card idea for entry to Trans Iowa is really a blast! (I like getting mail, by the way) The amount of effort and thought going into some of these cards is getting some play on mtbr.com's Endurance Forum. Check it out. Can anybody top Dr. Gary Cale's card? I don't know......it's the front runner right now! (By the way, check out the "advertisement" on his blog. Hilarious!)
Speaking of the subject of Dr. Gary Cale's advertisement, I noticed that the long distance running Dallas Sigurdur has mentioned that a certain somebody might be along for the ride if he makes the roster for Trans Iowa V3. veddy een-tahresteenk! (Don't forget! The cutoff for post card mail ins to get in the lottery drawing for T.I.V3 is December 15th!)
Mr. 24 leaves again on a jet plane today for sunny Southern California. His mission is a secret.......for now! I suspect there will be a "big announcement" coming soon and that his current status in life will forever be changed. Lookin' forward to see what happens and hoping for good things! We'll see come this weekend, I'm thinking!
The Twenty Nine Inches 29"er Festival idea is set for June 23rd and 24th, (I do not have an '07 calendar to verify that, but I believe that's a Saturday-Sunday date) At any rate, things are moving along quite well concerning the event. It looks as though we'll have some major demo bike action from the likes of Fisher, Salsa, Raleigh, the Badger Dorothy (or two!), and a as yet un-named new 29"er manufacturer that will be showing some proto-types. We will be raffling off chances to win a Raleigh 29"er and some other goodies, so stay tuned!
Okay, that's all for today folks! Back to work!
Wednesday News and Views

Did I ever mention that I got to ride this bike off road and that it rules!
Look for this frame to become available next spring and then watch it become one of the top XC 29"er hardtails of '07.
Yes......it's that good!
I just completed a review on the F-29 Cannondale Caffeine hardtail for Twenty Nine Inches which details my thoughts on that hardtail 29"er. Go read the review. I will only say here that it is a very different hardtail than most that I have had the pleasure to ride and it's definitely not a "me too" design. It's got a very different personality which may or may not appeal to you. I think it's a smart decision on Cannondales part because it definitely sets their bike apart from the "crowd", if you can call the geared only 29"er hardtail market a crowd.
The post card idea for entry to Trans Iowa is really a blast! (I like getting mail, by the way) The amount of effort and thought going into some of these cards is getting some play on mtbr.com's Endurance Forum. Check it out. Can anybody top Dr. Gary Cale's card? I don't know......it's the front runner right now! (By the way, check out the "advertisement" on his blog. Hilarious!)
Speaking of the subject of Dr. Gary Cale's advertisement, I noticed that the long distance running Dallas Sigurdur has mentioned that a certain somebody might be along for the ride if he makes the roster for Trans Iowa V3. veddy een-tahresteenk! (Don't forget! The cutoff for post card mail ins to get in the lottery drawing for T.I.V3 is December 15th!)
Mr. 24 leaves again on a jet plane today for sunny Southern California. His mission is a secret.......for now! I suspect there will be a "big announcement" coming soon and that his current status in life will forever be changed. Lookin' forward to see what happens and hoping for good things! We'll see come this weekend, I'm thinking!
The Twenty Nine Inches 29"er Festival idea is set for June 23rd and 24th, (I do not have an '07 calendar to verify that, but I believe that's a Saturday-Sunday date) At any rate, things are moving along quite well concerning the event. It looks as though we'll have some major demo bike action from the likes of Fisher, Salsa, Raleigh, the Badger Dorothy (or two!), and a as yet un-named new 29"er manufacturer that will be showing some proto-types. We will be raffling off chances to win a Raleigh 29"er and some other goodies, so stay tuned!
Okay, that's all for today folks! Back to work!
Tuesday, December 05, 2006
Single Speeding For Novices?
I'm seeing two sides to this story, and I haven't quite decided which side to take.........yet, but I think this is the result of a bigger, more complex situation. If you notice what Tim Grahl reports about his conversation with Brad Quartuccio of Dirt Rag, you'll notice that the idea stems from the thought that you would get a better quality single speed at a sub $500.00 price than you would a geared mtb at that price point. So, what is this really saying here?
Are we inferring that mountain bikes at the entry level are too expensive and not high enough quality? Does a higher quality rig, single speed or geared, result in a better off road experience for the beggining off roader? Does any of this really matter at all?
I think all of those are fair questions. My gut reaction is, it really doesn't matter how good your bike is. Or isn't, for that matter. What kind of bandwidth could we fill here with all the stories of begginer mtb'ers or "regular joe" types that were/are cleaning up on folks with mega dollar rigs and more experience on junk equipment? You've all heard the stories before.
So, if it wasn't the equipment, what was it? Skilz my friend, it was da skilz! With the right amount of talent/teaching/practice, you too could be riding at an elevated level compared to most. Yes, even on a mart bike, if need be. While a better bike may enhance the chances of you reaching a higher level or have a better experience, it doesn't guarantee it. No my friend, you can't buy yourself into a great set of off roading skills, ya gots ta earn 'em the good ol' fashioned way.
Now having said all of that, I would agree that perhaps a simpler drivetrain, a rigid platform with super fatty tires, and 29 inch wheels would make the perfect begginer off road machine. Why? Well, it's like Gary Fisher explained to me once. The big wheels "..buy you grace...", the simpler drive train is easier to shift and maintain, (I'd suggest a 1 X 7, or 1 X 8 for longevity and ease of use), and the lack of suspension simplifies things further while enhancing the chances for real trail skills to develope. Sure, a single speed drivetrain might even be better from a simplicity/ ease of use standpoint, but as Tim duly notes in his Blue collar piece, how many folks would get frustrated at having to walk huge sections of single track just because they were relegated to one gear?
So, in the final analysis, I'd say single speeding is best left to us knuckleheads that have a screw or two loose. You know who you are!
Single Speeding For Novices?
I'm seeing two sides to this story, and I haven't quite decided which side to take.........yet, but I think this is the result of a bigger, more complex situation. If you notice what Tim Grahl reports about his conversation with Brad Quartuccio of Dirt Rag, you'll notice that the idea stems from the thought that you would get a better quality single speed at a sub $500.00 price than you would a geared mtb at that price point. So, what is this really saying here?
Are we inferring that mountain bikes at the entry level are too expensive and not high enough quality? Does a higher quality rig, single speed or geared, result in a better off road experience for the beggining off roader? Does any of this really matter at all?
I think all of those are fair questions. My gut reaction is, it really doesn't matter how good your bike is. Or isn't, for that matter. What kind of bandwidth could we fill here with all the stories of begginer mtb'ers or "regular joe" types that were/are cleaning up on folks with mega dollar rigs and more experience on junk equipment? You've all heard the stories before.
So, if it wasn't the equipment, what was it? Skilz my friend, it was da skilz! With the right amount of talent/teaching/practice, you too could be riding at an elevated level compared to most. Yes, even on a mart bike, if need be. While a better bike may enhance the chances of you reaching a higher level or have a better experience, it doesn't guarantee it. No my friend, you can't buy yourself into a great set of off roading skills, ya gots ta earn 'em the good ol' fashioned way.
Now having said all of that, I would agree that perhaps a simpler drivetrain, a rigid platform with super fatty tires, and 29 inch wheels would make the perfect begginer off road machine. Why? Well, it's like Gary Fisher explained to me once. The big wheels "..buy you grace...", the simpler drive train is easier to shift and maintain, (I'd suggest a 1 X 7, or 1 X 8 for longevity and ease of use), and the lack of suspension simplifies things further while enhancing the chances for real trail skills to develope. Sure, a single speed drivetrain might even be better from a simplicity/ ease of use standpoint, but as Tim duly notes in his Blue collar piece, how many folks would get frustrated at having to walk huge sections of single track just because they were relegated to one gear?
So, in the final analysis, I'd say single speeding is best left to us knuckleheads that have a screw or two loose. You know who you are!
Monday, December 04, 2006
Gravel Grinding: The Bikes
The bikes that people ride on these long gravel rides are all over the place, design-wise. I've seen everything from full on road bikes to full suspended mountain bikes. Anything that has two wheels can and has been pressed into service, but here are my recommendations for what is best. This is going to work for long gravel rides. Like three plus hours.
My first choice would be a fat tired bike out fitted with 1.8 - 2.1 inch wide tires. Fully rigid, with maybe a suspended seatpost or perhaps a soft tail design for comfort on super long rides. Why? Because gravel roads can have a variety of surfaces, textures, and sometimes, no gravel at all! (In which case you might find yourself on an infamous "B" level maintenance road!) During the Dirty Kanza 200, I encountered everything from embedded bedrock, fist sized cobble stone like sections of rock, huge, chunky flint, all the way down to "moon dust" like powder. Even a 75 yard section of deep sand! And that was in the first 90 miles. (Since I didn't get any further than that! Next year....next year!) I wouldn't bother with a suspended front fork. Just extra weight for a minimal benefit. Fat tires at reasonable pressures will do just as good a job.
Gears or not. Pick yer poison there folks. It's all good out on the gravel, although I might add that gravel does a wonderful job of chewing up drivetrain equipment at an accelerated pace. Be advised!
Some folks might argue that a cross bike is better suited to this task. I'd have to disagree there. For short rides, you can get away with it, but on longer rides the twitchy geometry, thinner tires, and seated position will all take their toll. Check out the stories from the first Trans Iowa. Sure, some guys finished well on cross bikes. They also complained of physical ailments well beyond the time of the finish. As in days beyond........weeks even. Numbness and tingling. No thanks! I'll sacrifice a bit of speed to have the comfort and the ability to ride again in a weeks time. Or in ten years time. Ya know, maybe it's got something to do with getting older, but I just do not see any wisdom in winnning an event and being physically destroyed for weeks afterwards with after effects that could last a lifetime. Just me, I guess.........
And finally, of course you would expect that I would say a 29"er is taylor made for such a task, but well.........it is! Better roll out, better angle of attack on bumps, and the generally higher handle bar posistion of most 29"ers lends itself to making a perfect gravel grinder. You'll just have to try one!
That's about it for the bike aspect of gravel grinding. Look for a couple more "gravel love" posts in the future.
Gravel Grinding: The Bikes
The bikes that people ride on these long gravel rides are all over the place, design-wise. I've seen everything from full on road bikes to full suspended mountain bikes. Anything that has two wheels can and has been pressed into service, but here are my recommendations for what is best. This is going to work for long gravel rides. Like three plus hours.
My first choice would be a fat tired bike out fitted with 1.8 - 2.1 inch wide tires. Fully rigid, with maybe a suspended seatpost or perhaps a soft tail design for comfort on super long rides. Why? Because gravel roads can have a variety of surfaces, textures, and sometimes, no gravel at all! (In which case you might find yourself on an infamous "B" level maintenance road!) During the Dirty Kanza 200, I encountered everything from embedded bedrock, fist sized cobble stone like sections of rock, huge, chunky flint, all the way down to "moon dust" like powder. Even a 75 yard section of deep sand! And that was in the first 90 miles. (Since I didn't get any further than that! Next year....next year!) I wouldn't bother with a suspended front fork. Just extra weight for a minimal benefit. Fat tires at reasonable pressures will do just as good a job.
Gears or not. Pick yer poison there folks. It's all good out on the gravel, although I might add that gravel does a wonderful job of chewing up drivetrain equipment at an accelerated pace. Be advised!
Some folks might argue that a cross bike is better suited to this task. I'd have to disagree there. For short rides, you can get away with it, but on longer rides the twitchy geometry, thinner tires, and seated position will all take their toll. Check out the stories from the first Trans Iowa. Sure, some guys finished well on cross bikes. They also complained of physical ailments well beyond the time of the finish. As in days beyond........weeks even. Numbness and tingling. No thanks! I'll sacrifice a bit of speed to have the comfort and the ability to ride again in a weeks time. Or in ten years time. Ya know, maybe it's got something to do with getting older, but I just do not see any wisdom in winnning an event and being physically destroyed for weeks afterwards with after effects that could last a lifetime. Just me, I guess.........
And finally, of course you would expect that I would say a 29"er is taylor made for such a task, but well.........it is! Better roll out, better angle of attack on bumps, and the generally higher handle bar posistion of most 29"ers lends itself to making a perfect gravel grinder. You'll just have to try one!
That's about it for the bike aspect of gravel grinding. Look for a couple more "gravel love" posts in the future.