This week in the Dirty Kanza Chronicles I am introducing what I hope to be my rig for the big event. I searched many spec sheets and models of cyclo-cross type bikes before arriving upon this frame and fork. I'll get into more of that decision later, but for now, let's take a look at the bike as it is now....
Black Mountain Cycles "Monster Cross": I've been talking about Black Mountain Cycles for awhile now, so I won't get into that too much. (You can use the search term "Black Mountain Cycles" in my search box or Google to learn more.)
This frame is double butted chrome molybdenum steel alloy that is TIG welded. Horizontal drop outs allow the single speed set up. Cantilever brakes, of course, and all cables are routed over the top tube. Two water bottle mounts, rack mounts, fender mounts, and threaded rear brake cable stop and front derailleur cable stop with derailleur type adjusters are a nice touch.
The front fork is also steel featuring an investment cast sloping crown with plenty of clearance for big tires. Probably up to 1.9's will shoe horn into this fork and frame.
There's the STX Shimano cantilevers with Kool Stop brake pads. The hangar is an unknown model. It was floating around in my parts bin attached to some odd ball Dia Compe brakes, so it could be that manufacture. The head set is an Origin 8 cartridge type.
Here is a look at the Sante' hubbed, Matrix rimmed front wheel. The rear matches. These wheel were pretty much NOS condition, yet aged from over 20 years of sitting around. Gotta love that pearl anodized glow Shimano used to put on some of their nicer components. Best looking finish they've ever used, in my opinion.
There never has been a nicer looking quick release made by Shimano than their Sante' QR from the late 80's.
That's a big dust seal, eh?
36 hole wheels insure plenty of strength.
Ragley Luxy Bars in silver. Some unknown model of Dia Compe brake levers. Clunky Bontrager 31.8mm stem. The levers and stem will be up for replacement at some point. (The stem has to be silver, ya know?)
The Luxy bars are nice, but really, really wide. I may not stay with these. Time will tell.
Sugino crank found in the parts bin. 170mm length crank. Steel 40T ring. Old, pretty worn out WTB branded "Spud" type pedals. (Hand-me-downs from Jeff Kerkove!) Hiding inside is a Shimano UN-52 square taper cartridge bottom bracket.
20 tooth Surly cog and various spacers I had. Note that early 7 speed cassettes had no lock rings. They used a threaded on final cog instead. So I did too!
You get a peek at the drop ot adjusters there, and rack and fender mounts.
Campy aero seat post, Bontrager RL Inform saddle. Lurking at the bottom of the image is the brake cable adjuster on the brake bridge, and the IRC 42mm tire. The seat collar is stock BMC fare.
Why This Bike: The BMC was chosen based upon a few criteria I had going in: Steel frame, single speed capability, big tire clearances for at least 42mm tires, and geometry. My search landed me upon three choices: Surly Bikes CrossCheck, the Fisher Collection Presidio, and the BMC Monster Cross. I was able to straddle an Erwin, (model just below the Presdio), and it just wasn't quite right. The price was a bit steeper than the other two as well. The final came down to the Surly and the BMC. The BMC wins me over due to a few details. The head tube is longer on the BMC by 24mm. This keeps the bars up there without resorting to a ton of spacers. The BMC is also 3/4's of a pound lighter to begin with. That's substantial. (I'll take advantage of this in my later incarnations of this bike) Finally, the chain stays are 13mm longer, which translates into a bit longer chassis for a more stable, more comfortable ride.
Granted, any of the three would have been awesome bikes for my purposes. No "losers" here. I just found a few things about the Black Mountain Cycles flavor to be more tasty than the others. Plus, who can argue against orange? (Okay- well maybe a few of you!)
Training Update: Last weekend I got in a nice, almost three hour gravel grinder at a moderate pace. Commutes to work have been lengthened to gain more miles. With warmer weather I will begin to add night rides. Diet is holding well. I am going to get a bit more disciplined concerning that after the weekend at Frostbike. CIRREM is next weekend, which will work well as a training ride. More next week.....
Salsa Cycles Fargo Page
Sunday, February 20, 2011
The Dirty Kanza 200 Chronicles; The Bike
This week in the Dirty Kanza Chronicles I am introducing what I hope to be my rig for the big event. I searched many spec sheets and models of cyclo-cross type bikes before arriving upon this frame and fork. I'll get into more of that decision later, but for now, let's take a look at the bike as it is now....
Black Mountain Cycles "Monster Cross": I've been talking about Black Mountain Cycles for awhile now, so I won't get into that too much. (You can use the search term "Black Mountain Cycles" in my search box or Google to learn more.)
This frame is double butted chrome molybdenum steel alloy that is TIG welded. Horizontal drop outs allow the single speed set up. Cantilever brakes, of course, and all cables are routed over the top tube. Two water bottle mounts, rack mounts, fender mounts, and threaded rear brake cable stop and front derailleur cable stop with derailleur type adjusters are a nice touch.
The front fork is also steel featuring an investment cast sloping crown with plenty of clearance for big tires. Probably up to 1.9's will shoe horn into this fork and frame.
There's the STX Shimano cantilevers with Kool Stop brake pads. The hangar is an unknown model. It was floating around in my parts bin attached to some odd ball Dia Compe brakes, so it could be that manufacture. The head set is an Origin 8 cartridge type.
Here is a look at the Sante' hubbed, Matrix rimmed front wheel. The rear matches. These wheel were pretty much NOS condition, yet aged from over 20 years of sitting around. Gotta love that pearl anodized glow Shimano used to put on some of their nicer components. Best looking finish they've ever used, in my opinion.
There never has been a nicer looking quick release made by Shimano than their Sante' QR from the late 80's.
That's a big dust seal, eh?
36 hole wheels insure plenty of strength.
Ragley Luxy Bars in silver. Some unknown model of Dia Compe brake levers. Clunky Bontrager 31.8mm stem. The levers and stem will be up for replacement at some point. (The stem has to be silver, ya know?)
The Luxy bars are nice, but really, really wide. I may not stay with these. Time will tell.
Sugino crank found in the parts bin. 170mm length crank. Steel 40T ring. Old, pretty worn out WTB branded "Spud" type pedals. (Hand-me-downs from Jeff Kerkove!) Hiding inside is a Shimano UN-52 square taper cartridge bottom bracket.
20 tooth Surly cog and various spacers I had. Note that early 7 speed cassettes had no lock rings. They used a threaded on final cog instead. So I did too!
You get a peek at the drop ot adjusters there, and rack and fender mounts.
Campy aero seat post, Bontrager RL Inform saddle. Lurking at the bottom of the image is the brake cable adjuster on the brake bridge, and the IRC 42mm tire. The seat collar is stock BMC fare.
Why This Bike: The BMC was chosen based upon a few criteria I had going in: Steel frame, single speed capability, big tire clearances for at least 42mm tires, and geometry. My search landed me upon three choices: Surly Bikes CrossCheck, the Fisher Collection Presidio, and the BMC Monster Cross. I was able to straddle an Erwin, (model just below the Presdio), and it just wasn't quite right. The price was a bit steeper than the other two as well. The final came down to the Surly and the BMC. The BMC wins me over due to a few details. The head tube is longer on the BMC by 24mm. This keeps the bars up there without resorting to a ton of spacers. The BMC is also 3/4's of a pound lighter to begin with. That's substantial. (I'll take advantage of this in my later incarnations of this bike) Finally, the chain stays are 13mm longer, which translates into a bit longer chassis for a more stable, more comfortable ride.
Granted, any of the three would have been awesome bikes for my purposes. No "losers" here. I just found a few things about the Black Mountain Cycles flavor to be more tasty than the others. Plus, who can argue against orange? (Okay- well maybe a few of you!)
Training Update: Last weekend I got in a nice, almost three hour gravel grinder at a moderate pace. Commutes to work have been lengthened to gain more miles. With warmer weather I will begin to add night rides. Diet is holding well. I am going to get a bit more disciplined concerning that after the weekend at Frostbike. CIRREM is next weekend, which will work well as a training ride. More next week.....
Black Mountain Cycles "Monster Cross": I've been talking about Black Mountain Cycles for awhile now, so I won't get into that too much. (You can use the search term "Black Mountain Cycles" in my search box or Google to learn more.)
This frame is double butted chrome molybdenum steel alloy that is TIG welded. Horizontal drop outs allow the single speed set up. Cantilever brakes, of course, and all cables are routed over the top tube. Two water bottle mounts, rack mounts, fender mounts, and threaded rear brake cable stop and front derailleur cable stop with derailleur type adjusters are a nice touch.
The front fork is also steel featuring an investment cast sloping crown with plenty of clearance for big tires. Probably up to 1.9's will shoe horn into this fork and frame.
There's the STX Shimano cantilevers with Kool Stop brake pads. The hangar is an unknown model. It was floating around in my parts bin attached to some odd ball Dia Compe brakes, so it could be that manufacture. The head set is an Origin 8 cartridge type.
Here is a look at the Sante' hubbed, Matrix rimmed front wheel. The rear matches. These wheel were pretty much NOS condition, yet aged from over 20 years of sitting around. Gotta love that pearl anodized glow Shimano used to put on some of their nicer components. Best looking finish they've ever used, in my opinion.
There never has been a nicer looking quick release made by Shimano than their Sante' QR from the late 80's.
That's a big dust seal, eh?
36 hole wheels insure plenty of strength.
Ragley Luxy Bars in silver. Some unknown model of Dia Compe brake levers. Clunky Bontrager 31.8mm stem. The levers and stem will be up for replacement at some point. (The stem has to be silver, ya know?)
The Luxy bars are nice, but really, really wide. I may not stay with these. Time will tell.
Sugino crank found in the parts bin. 170mm length crank. Steel 40T ring. Old, pretty worn out WTB branded "Spud" type pedals. (Hand-me-downs from Jeff Kerkove!) Hiding inside is a Shimano UN-52 square taper cartridge bottom bracket.
20 tooth Surly cog and various spacers I had. Note that early 7 speed cassettes had no lock rings. They used a threaded on final cog instead. So I did too!
You get a peek at the drop ot adjusters there, and rack and fender mounts.
Campy aero seat post, Bontrager RL Inform saddle. Lurking at the bottom of the image is the brake cable adjuster on the brake bridge, and the IRC 42mm tire. The seat collar is stock BMC fare.
Why This Bike: The BMC was chosen based upon a few criteria I had going in: Steel frame, single speed capability, big tire clearances for at least 42mm tires, and geometry. My search landed me upon three choices: Surly Bikes CrossCheck, the Fisher Collection Presidio, and the BMC Monster Cross. I was able to straddle an Erwin, (model just below the Presdio), and it just wasn't quite right. The price was a bit steeper than the other two as well. The final came down to the Surly and the BMC. The BMC wins me over due to a few details. The head tube is longer on the BMC by 24mm. This keeps the bars up there without resorting to a ton of spacers. The BMC is also 3/4's of a pound lighter to begin with. That's substantial. (I'll take advantage of this in my later incarnations of this bike) Finally, the chain stays are 13mm longer, which translates into a bit longer chassis for a more stable, more comfortable ride.
Granted, any of the three would have been awesome bikes for my purposes. No "losers" here. I just found a few things about the Black Mountain Cycles flavor to be more tasty than the others. Plus, who can argue against orange? (Okay- well maybe a few of you!)
Training Update: Last weekend I got in a nice, almost three hour gravel grinder at a moderate pace. Commutes to work have been lengthened to gain more miles. With warmer weather I will begin to add night rides. Diet is holding well. I am going to get a bit more disciplined concerning that after the weekend at Frostbike. CIRREM is next weekend, which will work well as a training ride. More next week.....
Saturday, February 19, 2011
Frostbike '11: Update
A brief update from Northfield, Minnesota.......
- Ben Witt's snow bike is psick!! I have images, but so as not to steal his joy of first showing it off, I will reserve those for later. Trust me on this though, you haven't seen one like this and it will blow your socks off.
- Mike's Bikes was awesome once again. Bikes were ridden indoors and so fast that a "blue groove" was created around each corner.
- The mechanics of Mike's Bikes and Milltown Cycles are a psychotic, bike torturing cadre' the likes which have not been seen before. (I have images and will post them!)
- Greek pizza is perhaps the best pizza I've ever eaten.
Frostbike '11: Update
A brief update from Northfield, Minnesota.......
- Ben Witt's snow bike is psick!! I have images, but so as not to steal his joy of first showing it off, I will reserve those for later. Trust me on this though, you haven't seen one like this and it will blow your socks off.
- Mike's Bikes was awesome once again. Bikes were ridden indoors and so fast that a "blue groove" was created around each corner.
- The mechanics of Mike's Bikes and Milltown Cycles are a psychotic, bike torturing cadre' the likes which have not been seen before. (I have images and will post them!)
- Greek pizza is perhaps the best pizza I've ever eaten.
Friday, February 18, 2011
Friday News And Views
Frostbike '11: First up is Frostbike and I am attending again on both Saturday and Sunday. Tonight I'll be hanging out in Northfield, Minnesota and maybe doing some silly things, who knows. However that falls out will get reported on here throughout the weekend. Stay tuned for that. Also, I already have gotten some 29"er specific news that is pretty cool, so stay tuned to Twenty Nine Inches for that as well.
Orange Crush #42: Here she is all built up after the maiden voyage to work yesterday. I'll do a separate build list and photo essay on this rig, but please keep in mind- this is a total parts bin build!
The only part I had to buy for this as you see it was the frame/fork, and head set. The rest was all sitting around in The Lab, being unused. Notes: The lighting at work washed out the color here. It actually looks brighter and darker outside. It is obviously set up as a single speed, and will stay that way for a while as we work our way through the crap weather. So far, I am super stoked about the ride. I went for a bit more aggressive position than I would have on my 29"ers and so far it has been great. The #42 refers to the serial number. Less than 100 Black Mountain Cycles bikes exist and only about 50 of them are cross bikes. More later......
Trans Iowa V7 Updates: Due to the Frostbike weekend, the regularly scheduled Trans Iowa update will not happen this week. In fact, I may put it on hiatus for a couple weeks unless I come up with a worthy reason for updating. Hopefully, all the training is going well out there and everyone is getting a plan together. Remember: If you can't make it for any reason, please let me know ASAP!!
DK 200 Chronicles: This may still happen for Sunday, which is the day I have chosen to post these. I can tell you now it will be most likely the build out post for the BMC bike above, but there may be more. Stay tuned....
Off Road Bar Update: I'm going to do a massive off road drop bar post on Gravel Grinder News and an update on the Ragley Luxy Bar on Twenty Nine Inches soon. Stay tuned for that.
Orange Crush #42: Here she is all built up after the maiden voyage to work yesterday. I'll do a separate build list and photo essay on this rig, but please keep in mind- this is a total parts bin build!
The only part I had to buy for this as you see it was the frame/fork, and head set. The rest was all sitting around in The Lab, being unused. Notes: The lighting at work washed out the color here. It actually looks brighter and darker outside. It is obviously set up as a single speed, and will stay that way for a while as we work our way through the crap weather. So far, I am super stoked about the ride. I went for a bit more aggressive position than I would have on my 29"ers and so far it has been great. The #42 refers to the serial number. Less than 100 Black Mountain Cycles bikes exist and only about 50 of them are cross bikes. More later......
Trans Iowa V7 Updates: Due to the Frostbike weekend, the regularly scheduled Trans Iowa update will not happen this week. In fact, I may put it on hiatus for a couple weeks unless I come up with a worthy reason for updating. Hopefully, all the training is going well out there and everyone is getting a plan together. Remember: If you can't make it for any reason, please let me know ASAP!!
DK 200 Chronicles: This may still happen for Sunday, which is the day I have chosen to post these. I can tell you now it will be most likely the build out post for the BMC bike above, but there may be more. Stay tuned....
Off Road Bar Update: I'm going to do a massive off road drop bar post on Gravel Grinder News and an update on the Ragley Luxy Bar on Twenty Nine Inches soon. Stay tuned for that.
Friday News And Views
Frostbike '11: First up is Frostbike and I am attending again on both Saturday and Sunday. Tonight I'll be hanging out in Northfield, Minnesota and maybe doing some silly things, who knows. However that falls out will get reported on here throughout the weekend. Stay tuned for that. Also, I already have gotten some 29"er specific news that is pretty cool, so stay tuned to Twenty Nine Inches for that as well.
Orange Crush #42: Here she is all built up after the maiden voyage to work yesterday. I'll do a separate build list and photo essay on this rig, but please keep in mind- this is a total parts bin build!
The only part I had to buy for this as you see it was the frame/fork, and head set. The rest was all sitting around in The Lab, being unused. Notes: The lighting at work washed out the color here. It actually looks brighter and darker outside. It is obviously set up as a single speed, and will stay that way for a while as we work our way through the crap weather. So far, I am super stoked about the ride. I went for a bit more aggressive position than I would have on my 29"ers and so far it has been great. The #42 refers to the serial number. Less than 100 Black Mountain Cycles bikes exist and only about 50 of them are cross bikes. More later......
Trans Iowa V7 Updates: Due to the Frostbike weekend, the regularly scheduled Trans Iowa update will not happen this week. In fact, I may put it on hiatus for a couple weeks unless I come up with a worthy reason for updating. Hopefully, all the training is going well out there and everyone is getting a plan together. Remember: If you can't make it for any reason, please let me know ASAP!!
DK 200 Chronicles: This may still happen for Sunday, which is the day I have chosen to post these. I can tell you now it will be most likely the build out post for the BMC bike above, but there may be more. Stay tuned....
Off Road Bar Update: I'm going to do a massive off road drop bar post on Gravel Grinder News and an update on the Ragley Luxy Bar on Twenty Nine Inches soon. Stay tuned for that.
Orange Crush #42: Here she is all built up after the maiden voyage to work yesterday. I'll do a separate build list and photo essay on this rig, but please keep in mind- this is a total parts bin build!
The only part I had to buy for this as you see it was the frame/fork, and head set. The rest was all sitting around in The Lab, being unused. Notes: The lighting at work washed out the color here. It actually looks brighter and darker outside. It is obviously set up as a single speed, and will stay that way for a while as we work our way through the crap weather. So far, I am super stoked about the ride. I went for a bit more aggressive position than I would have on my 29"ers and so far it has been great. The #42 refers to the serial number. Less than 100 Black Mountain Cycles bikes exist and only about 50 of them are cross bikes. More later......
Trans Iowa V7 Updates: Due to the Frostbike weekend, the regularly scheduled Trans Iowa update will not happen this week. In fact, I may put it on hiatus for a couple weeks unless I come up with a worthy reason for updating. Hopefully, all the training is going well out there and everyone is getting a plan together. Remember: If you can't make it for any reason, please let me know ASAP!!
DK 200 Chronicles: This may still happen for Sunday, which is the day I have chosen to post these. I can tell you now it will be most likely the build out post for the BMC bike above, but there may be more. Stay tuned....
Off Road Bar Update: I'm going to do a massive off road drop bar post on Gravel Grinder News and an update on the Ragley Luxy Bar on Twenty Nine Inches soon. Stay tuned for that.
Thursday, February 17, 2011
The "Orange Crush"
Wednesday is my day off, and it worked out that the FedEx man was supposed to head over to Guitar Ted Laboratories and drop off the Black Mountain Cycles Monster Cross frame and fork. I was in great anticipation of this farme and fork, since I want to use it in just over a week at CIRREM.
You might know how it is when you are expecting the delivery man. Checking the windows. Was that a noise outside that I heard? Yeah.....pretty much paranoid! I couldn't even work down in The Lab since I was afraid I'd miss the guy and he would leave the dreaded "yellow note" saying he'd try again tomorrow. Time seemed to drag. I made lunch. Still no delivery man.
Well, around about noon I heard the tell-tale sound of a diesel truck motor. I zoomed up to the front window. Drat! It was the "Brown Santa". Not at all the guy I was looking for.
Then about an hour later I heard the same type of noise. It was the FedEx truck! Yes! When the guy knocked, I actually counted to ten before opening the door, just so I wouldn't startle him. He slid the box inside saying, "Whatever it is, it ain't heavy." And it wasn't my Brother either! (heh! Sorry, it's late as I write this. I am a little punchy) Anyway, I ripped open the box, as you can imagine, and saw the "Orange Crush" color right away. Pretty cool.
Once again, I am impressed with Mike's work. I had the pleasure of riding a Haro Mary when Mike designed their 29"er, and I could see similar details in the cross frame. Even the box it came in was reminiscent of the frame box the Mary came in. Hmm.....Anyway.
If you are wondering, yes! I did get it built up. I threw it together with a somewhat temporary build just to get the thing rolling so I can get things dialed in with regards to fit, and what not. Obviously, the easy thing to do was to set it up single speed, which is what I did. Well, easy is relative. I had forgotten how testy Shimano cantilever brakes can be to set up. (I used an old stash of brakes I had saved since the 90's. Old STX cantilevers.) In fact, some of the parts I used go back to the 80's.
I'll detail all that out later, but for now, I am rather stoked to be riding a Black Mountain Cycles bike, and my test ride was pretty dang smooth. Yeah......smooth!
You might know how it is when you are expecting the delivery man. Checking the windows. Was that a noise outside that I heard? Yeah.....pretty much paranoid! I couldn't even work down in The Lab since I was afraid I'd miss the guy and he would leave the dreaded "yellow note" saying he'd try again tomorrow. Time seemed to drag. I made lunch. Still no delivery man.
Well, around about noon I heard the tell-tale sound of a diesel truck motor. I zoomed up to the front window. Drat! It was the "Brown Santa". Not at all the guy I was looking for.
Then about an hour later I heard the same type of noise. It was the FedEx truck! Yes! When the guy knocked, I actually counted to ten before opening the door, just so I wouldn't startle him. He slid the box inside saying, "Whatever it is, it ain't heavy." And it wasn't my Brother either! (heh! Sorry, it's late as I write this. I am a little punchy) Anyway, I ripped open the box, as you can imagine, and saw the "Orange Crush" color right away. Pretty cool.
Once again, I am impressed with Mike's work. I had the pleasure of riding a Haro Mary when Mike designed their 29"er, and I could see similar details in the cross frame. Even the box it came in was reminiscent of the frame box the Mary came in. Hmm.....Anyway.
If you are wondering, yes! I did get it built up. I threw it together with a somewhat temporary build just to get the thing rolling so I can get things dialed in with regards to fit, and what not. Obviously, the easy thing to do was to set it up single speed, which is what I did. Well, easy is relative. I had forgotten how testy Shimano cantilever brakes can be to set up. (I used an old stash of brakes I had saved since the 90's. Old STX cantilevers.) In fact, some of the parts I used go back to the 80's.
I'll detail all that out later, but for now, I am rather stoked to be riding a Black Mountain Cycles bike, and my test ride was pretty dang smooth. Yeah......smooth!
The "Orange Crush"
Wednesday is my day off, and it worked out that the FedEx man was supposed to head over to Guitar Ted Laboratories and drop off the Black Mountain Cycles Monster Cross frame and fork. I was in great anticipation of this farme and fork, since I want to use it in just over a week at CIRREM.
You might know how it is when you are expecting the delivery man. Checking the windows. Was that a noise outside that I heard? Yeah.....pretty much paranoid! I couldn't even work down in The Lab since I was afraid I'd miss the guy and he would leave the dreaded "yellow note" saying he'd try again tomorrow. Time seemed to drag. I made lunch. Still no delivery man.
Well, around about noon I heard the tell-tale sound of a diesel truck motor. I zoomed up to the front window. Drat! It was the "Brown Santa". Not at all the guy I was looking for.
Then about an hour later I heard the same type of noise. It was the FedEx truck! Yes! When the guy knocked, I actually counted to ten before opening the door, just so I wouldn't startle him. He slid the box inside saying, "Whatever it is, it ain't heavy." And it wasn't my Brother either! (heh! Sorry, it's late as I write this. I am a little punchy) Anyway, I ripped open the box, as you can imagine, and saw the "Orange Crush" color right away. Pretty cool.
Once again, I am impressed with Mike's work. I had the pleasure of riding a Haro Mary when Mike designed their 29"er, and I could see similar details in the cross frame. Even the box it came in was reminiscent of the frame box the Mary came in. Hmm.....Anyway.
If you are wondering, yes! I did get it built up. I threw it together with a somewhat temporary build just to get the thing rolling so I can get things dialed in with regards to fit, and what not. Obviously, the easy thing to do was to set it up single speed, which is what I did. Well, easy is relative. I had forgotten how testy Shimano cantilever brakes can be to set up. (I used an old stash of brakes I had saved since the 90's. Old STX cantilevers.) In fact, some of the parts I used go back to the 80's.
I'll detail all that out later, but for now, I am rather stoked to be riding a Black Mountain Cycles bike, and my test ride was pretty dang smooth. Yeah......smooth!
You might know how it is when you are expecting the delivery man. Checking the windows. Was that a noise outside that I heard? Yeah.....pretty much paranoid! I couldn't even work down in The Lab since I was afraid I'd miss the guy and he would leave the dreaded "yellow note" saying he'd try again tomorrow. Time seemed to drag. I made lunch. Still no delivery man.
Well, around about noon I heard the tell-tale sound of a diesel truck motor. I zoomed up to the front window. Drat! It was the "Brown Santa". Not at all the guy I was looking for.
Then about an hour later I heard the same type of noise. It was the FedEx truck! Yes! When the guy knocked, I actually counted to ten before opening the door, just so I wouldn't startle him. He slid the box inside saying, "Whatever it is, it ain't heavy." And it wasn't my Brother either! (heh! Sorry, it's late as I write this. I am a little punchy) Anyway, I ripped open the box, as you can imagine, and saw the "Orange Crush" color right away. Pretty cool.
Once again, I am impressed with Mike's work. I had the pleasure of riding a Haro Mary when Mike designed their 29"er, and I could see similar details in the cross frame. Even the box it came in was reminiscent of the frame box the Mary came in. Hmm.....Anyway.
If you are wondering, yes! I did get it built up. I threw it together with a somewhat temporary build just to get the thing rolling so I can get things dialed in with regards to fit, and what not. Obviously, the easy thing to do was to set it up single speed, which is what I did. Well, easy is relative. I had forgotten how testy Shimano cantilever brakes can be to set up. (I used an old stash of brakes I had saved since the 90's. Old STX cantilevers.) In fact, some of the parts I used go back to the 80's.
I'll detail all that out later, but for now, I am rather stoked to be riding a Black Mountain Cycles bike, and my test ride was pretty dang smooth. Yeah......smooth!
Wednesday, February 16, 2011
Wednesday News And Views
A few things on the radar today....
Special Delivery? The confounded FedEx Tracker has been stuck on the same information since last Saturday, (not that I have been checking it constantly....because, well......you know!), and at any rate, the frame/fork from Black Mountain Cycles is due in today, according to the FedEx folks.
Never believe any shipping tracker device, until your package is in hand, as I always say, so I'll just wait it out till it actually arrives. When it does, I have a temporary, "get-it-up-and-running" build I will throw at it to get it....well, up and running! It won't be fancy, but it'll do the trick for now. The funny thing is, I only have to buy a few parts to finish it off, and almost everything will be silver, which is what I wanted to go for anyway. If everything plays well, I may be able to start riding this thing yet this week.
Well, assuming you can believe the FedEx Tracker, which I do not. Just sayin'!
Breaking The Mold: You know, I have opined here before about carbon fiber, "me-too" frames coming out of the woodwork from all sorts of outlets that seem to have similar "DNA" to each other. In other words, they seem to be designed in a somewhat conservative manner and sold via Chinese or other outlets with minor tweaks to distinguish one from the other. I find all of that to be rather boring and un-inventive. I mean, anyone can order from a menu, and to my mind, it belies the potential of using carbon fiber composites as a frame material in the first place.
The running line on carbon has always been that the designers and engineers could do whatever shapes that optimized performance that were necessary. You didn't have to be constrained by tubular shapes, limited tube dimensions, or difficulty in forming. Carbon fiber is very labor intensive, and thus, usually expensive. However; imagine if a wild, multi-shaped frame set could be produced to address all the inefficiencies in 29"er frame design. Then the price might just be worth the performance gained. Maybe the full potential of composites technology could be brought to bear to elevate performance, and not mimic the look of a steel cruiser rendered in carbon fiber.
Well, finally we're starting to see something like this with the Chiru Bikes I reported on, and with these images released by Giant of their upcoming XtC Composite 29"er. Giant appears to have taken a "clean sheet" approach to hard tail 29"er design with a material that allows what otherwise would be impossible to render in metal. Offset down tube, asymmetrical chain stays, and massive looking tube shapes. You may have seen some of this on road bikes, or full suspension designs, but never on such a big wheeled machine has this been seen before.I have a link to more on the Twenty Nine Inches post about this bike here.
<==image poached from the Salsa Cycles blog.
Frostbike '11: So....it happens that I'll be seeing some other new, fun stuff this coming weekend up at Quality Bicycle Product's annual dealer only show, Frostbike. This also means that another recent tradition that sprang up a couple of years ago will also take place again. That would be the hanging out at Mike's Bikes in Northfield, MN with Ben Witt, and friends. There will be merriment of a different sort this time though, and you can look for reports on all of that coming this weekend from the source of the action.
This year promises to be a good one from the looks of it, if you are into 29"ers, so stay tuned and look forward to my reports here and on Twenty Nine Inches. One of the new rigs I hope to be reporting on is the new Mamasita, (image in red shown here), which has always been close to my heart, as it was the introduction of the original Mamasita to me at a Salsa event held out at the Boy Scout Camp that I got to know Gnat and Kid a bit better. That was a great weekend that I'll not forget, and that memory is tied to the Mamasita for me. I know I am looking forward to seeing that bike, and the rest of the goods, and most importantly- the people, this weekend.
Special Delivery? The confounded FedEx Tracker has been stuck on the same information since last Saturday, (not that I have been checking it constantly....because, well......you know!), and at any rate, the frame/fork from Black Mountain Cycles is due in today, according to the FedEx folks.
Never believe any shipping tracker device, until your package is in hand, as I always say, so I'll just wait it out till it actually arrives. When it does, I have a temporary, "get-it-up-and-running" build I will throw at it to get it....well, up and running! It won't be fancy, but it'll do the trick for now. The funny thing is, I only have to buy a few parts to finish it off, and almost everything will be silver, which is what I wanted to go for anyway. If everything plays well, I may be able to start riding this thing yet this week.
Well, assuming you can believe the FedEx Tracker, which I do not. Just sayin'!
Breaking The Mold: You know, I have opined here before about carbon fiber, "me-too" frames coming out of the woodwork from all sorts of outlets that seem to have similar "DNA" to each other. In other words, they seem to be designed in a somewhat conservative manner and sold via Chinese or other outlets with minor tweaks to distinguish one from the other. I find all of that to be rather boring and un-inventive. I mean, anyone can order from a menu, and to my mind, it belies the potential of using carbon fiber composites as a frame material in the first place.
The running line on carbon has always been that the designers and engineers could do whatever shapes that optimized performance that were necessary. You didn't have to be constrained by tubular shapes, limited tube dimensions, or difficulty in forming. Carbon fiber is very labor intensive, and thus, usually expensive. However; imagine if a wild, multi-shaped frame set could be produced to address all the inefficiencies in 29"er frame design. Then the price might just be worth the performance gained. Maybe the full potential of composites technology could be brought to bear to elevate performance, and not mimic the look of a steel cruiser rendered in carbon fiber.
Well, finally we're starting to see something like this with the Chiru Bikes I reported on, and with these images released by Giant of their upcoming XtC Composite 29"er. Giant appears to have taken a "clean sheet" approach to hard tail 29"er design with a material that allows what otherwise would be impossible to render in metal. Offset down tube, asymmetrical chain stays, and massive looking tube shapes. You may have seen some of this on road bikes, or full suspension designs, but never on such a big wheeled machine has this been seen before.I have a link to more on the Twenty Nine Inches post about this bike here.
<==image poached from the Salsa Cycles blog.
Frostbike '11: So....it happens that I'll be seeing some other new, fun stuff this coming weekend up at Quality Bicycle Product's annual dealer only show, Frostbike. This also means that another recent tradition that sprang up a couple of years ago will also take place again. That would be the hanging out at Mike's Bikes in Northfield, MN with Ben Witt, and friends. There will be merriment of a different sort this time though, and you can look for reports on all of that coming this weekend from the source of the action.
This year promises to be a good one from the looks of it, if you are into 29"ers, so stay tuned and look forward to my reports here and on Twenty Nine Inches. One of the new rigs I hope to be reporting on is the new Mamasita, (image in red shown here), which has always been close to my heart, as it was the introduction of the original Mamasita to me at a Salsa event held out at the Boy Scout Camp that I got to know Gnat and Kid a bit better. That was a great weekend that I'll not forget, and that memory is tied to the Mamasita for me. I know I am looking forward to seeing that bike, and the rest of the goods, and most importantly- the people, this weekend.
Labels:
Black Mountain Cycles,
carbon fiber,
Frostbike,
Giant,
Mamasita,
Salsa Cycles
Wednesday News And Views
A few things on the radar today....
Special Delivery? The confounded FedEx Tracker has been stuck on the same information since last Saturday, (not that I have been checking it constantly....because, well......you know!), and at any rate, the frame/fork from Black Mountain Cycles is due in today, according to the FedEx folks.
Never believe any shipping tracker device, until your package is in hand, as I always say, so I'll just wait it out till it actually arrives. When it does, I have a temporary, "get-it-up-and-running" build I will throw at it to get it....well, up and running! It won't be fancy, but it'll do the trick for now. The funny thing is, I only have to buy a few parts to finish it off, and almost everything will be silver, which is what I wanted to go for anyway. If everything plays well, I may be able to start riding this thing yet this week.
Well, assuming you can believe the FedEx Tracker, which I do not. Just sayin'!
Breaking The Mold: You know, I have opined here before about carbon fiber, "me-too" frames coming out of the woodwork from all sorts of outlets that seem to have similar "DNA" to each other. In other words, they seem to be designed in a somewhat conservative manner and sold via Chinese or other outlets with minor tweaks to distinguish one from the other. I find all of that to be rather boring and un-inventive. I mean, anyone can order from a menu, and to my mind, it belies the potential of using carbon fiber composites as a frame material in the first place.
The running line on carbon has always been that the designers and engineers could do whatever shapes that optimized performance that were necessary. You didn't have to be constrained by tubular shapes, limited tube dimensions, or difficulty in forming. Carbon fiber is very labor intensive, and thus, usually expensive. However; imagine if a wild, multi-shaped frame set could be produced to address all the inefficiencies in 29"er frame design. Then the price might just be worth the performance gained. Maybe the full potential of composites technology could be brought to bear to elevate performance, and not mimic the look of a steel cruiser rendered in carbon fiber.
Well, finally we're starting to see something like this with the Chiru Bikes I reported on, and with these images released by Giant of their upcoming XtC Composite 29"er. Giant appears to have taken a "clean sheet" approach to hard tail 29"er design with a material that allows what otherwise would be impossible to render in metal. Offset down tube, asymmetrical chain stays, and massive looking tube shapes. You may have seen some of this on road bikes, or full suspension designs, but never on such a big wheeled machine has this been seen before.I have a link to more on the Twenty Nine Inches post about this bike here.
<==image poached from the Salsa Cycles blog.
Frostbike '11: So....it happens that I'll be seeing some other new, fun stuff this coming weekend up at Quality Bicycle Product's annual dealer only show, Frostbike. This also means that another recent tradition that sprang up a couple of years ago will also take place again. That would be the hanging out at Mike's Bikes in Northfield, MN with Ben Witt, and friends. There will be merriment of a different sort this time though, and you can look for reports on all of that coming this weekend from the source of the action.
This year promises to be a good one from the looks of it, if you are into 29"ers, so stay tuned and look forward to my reports here and on Twenty Nine Inches. One of the new rigs I hope to be reporting on is the new Mamasita, (image in red shown here), which has always been close to my heart, as it was the introduction of the original Mamasita to me at a Salsa event held out at the Boy Scout Camp that I got to know Gnat and Kid a bit better. That was a great weekend that I'll not forget, and that memory is tied to the Mamasita for me. I know I am looking forward to seeing that bike, and the rest of the goods, and most importantly- the people, this weekend.
Special Delivery? The confounded FedEx Tracker has been stuck on the same information since last Saturday, (not that I have been checking it constantly....because, well......you know!), and at any rate, the frame/fork from Black Mountain Cycles is due in today, according to the FedEx folks.
Never believe any shipping tracker device, until your package is in hand, as I always say, so I'll just wait it out till it actually arrives. When it does, I have a temporary, "get-it-up-and-running" build I will throw at it to get it....well, up and running! It won't be fancy, but it'll do the trick for now. The funny thing is, I only have to buy a few parts to finish it off, and almost everything will be silver, which is what I wanted to go for anyway. If everything plays well, I may be able to start riding this thing yet this week.
Well, assuming you can believe the FedEx Tracker, which I do not. Just sayin'!
Breaking The Mold: You know, I have opined here before about carbon fiber, "me-too" frames coming out of the woodwork from all sorts of outlets that seem to have similar "DNA" to each other. In other words, they seem to be designed in a somewhat conservative manner and sold via Chinese or other outlets with minor tweaks to distinguish one from the other. I find all of that to be rather boring and un-inventive. I mean, anyone can order from a menu, and to my mind, it belies the potential of using carbon fiber composites as a frame material in the first place.
The running line on carbon has always been that the designers and engineers could do whatever shapes that optimized performance that were necessary. You didn't have to be constrained by tubular shapes, limited tube dimensions, or difficulty in forming. Carbon fiber is very labor intensive, and thus, usually expensive. However; imagine if a wild, multi-shaped frame set could be produced to address all the inefficiencies in 29"er frame design. Then the price might just be worth the performance gained. Maybe the full potential of composites technology could be brought to bear to elevate performance, and not mimic the look of a steel cruiser rendered in carbon fiber.
Well, finally we're starting to see something like this with the Chiru Bikes I reported on, and with these images released by Giant of their upcoming XtC Composite 29"er. Giant appears to have taken a "clean sheet" approach to hard tail 29"er design with a material that allows what otherwise would be impossible to render in metal. Offset down tube, asymmetrical chain stays, and massive looking tube shapes. You may have seen some of this on road bikes, or full suspension designs, but never on such a big wheeled machine has this been seen before.I have a link to more on the Twenty Nine Inches post about this bike here.
<==image poached from the Salsa Cycles blog.
Frostbike '11: So....it happens that I'll be seeing some other new, fun stuff this coming weekend up at Quality Bicycle Product's annual dealer only show, Frostbike. This also means that another recent tradition that sprang up a couple of years ago will also take place again. That would be the hanging out at Mike's Bikes in Northfield, MN with Ben Witt, and friends. There will be merriment of a different sort this time though, and you can look for reports on all of that coming this weekend from the source of the action.
This year promises to be a good one from the looks of it, if you are into 29"ers, so stay tuned and look forward to my reports here and on Twenty Nine Inches. One of the new rigs I hope to be reporting on is the new Mamasita, (image in red shown here), which has always been close to my heart, as it was the introduction of the original Mamasita to me at a Salsa event held out at the Boy Scout Camp that I got to know Gnat and Kid a bit better. That was a great weekend that I'll not forget, and that memory is tied to the Mamasita for me. I know I am looking forward to seeing that bike, and the rest of the goods, and most importantly- the people, this weekend.
Labels:
Black Mountain Cycles,
carbon fiber,
Frostbike,
Giant,
Mamasita,
Salsa Cycles
Tuesday, February 15, 2011
Off Road Drop Bar Comparison: Part II
In my last look at off road drop bars, I did not have a Woodchipper handy to use as a comparison sample, and I also noted it was a heck of a lot different than most bars, other than the new Ragley Bikes Luxy Bar. Well, if you missed that post, you can read it here. This go round, I have a Pro Moto 31.8mm bar clamp diameter 46cm wide Woodchipper and a Luxy Bar to compare head to head with each other. Let's take a quick look.....
Here we have the Luxy Bar out front (330gm) and the Woodchipper in the background (330gm). Although both feature pretty dramatically swept drop sections, the big differences are readily apparent here.
The "flare" outwards of the drops on the Luxy is classic off road drop bar fare. The Woodchipper almost looks like it is bent inwards, (but it isn't, it is a trick of the perspective here), and you can also see the top of the Luxy is 31.8mm all the way across to each drop section. Finally, the Luxy is about 1 1/2" wider over-all from tip to tip, than the Woodchipper. The Luxy is the widest off road drop I know of at 27.5" wide!
Before we leave the front view, I want to point out that the Woodchipper will allow your levers to be the closest to a traditional road bike drop bar set up position that any off road drop bar can offer. The nearly vertical drop section keeps the levers almost straight up and down, albeit canted inwards, so if you value the hood position due to road bike experience, the Woodchipper is closest of anything you'll find next to the Gary II Bar from the first post. (I haven't tried the Gary II yet, but I will get that on a bike soon and give a report when I do.)
As I say, it is really hard to take a photo of a Woodchipper and not make it look bent inwards. Here is my best attempt. The bar makes a slight "S" shape as it drops from the top to the extension, and this area is in-line with the swept extension, as you can sort of make out here. The Luxy Bar has a much more dramatic "S" shape as the bar goes from the top to the extension.
The Luxy Bar lays your levers sideways a bit, and with STI shifting, the levers almost seem like an STI Mountain lever. It is easy to use, but the hoods are canted due to this and may offend those who crave a traditional hoods position. That said, the Luxy sets the hoods up high enough to make the hoods very usable and yet you can grab the brake lever easily from the drops. This is due to the minimal drop the Luxy has.
And here is the shape of the drops, or "hooks". You can see that the Luxy has a generous "reach" or "ramp" area on top. Yet it also has a generous drop extension as well. One very important thing to note here though is how the drop extension and "ramp" are in relation to each other.
On the Woodchipper, the drop extension is not even close to being parallel to the ramp section. This "opened" hook shape means that most Woodchipper set ups will end up having the drop section pointing downwards and back towards the rear axle, or below. This is because in order to get a ramp that you can have any sort of comfortable hand position on, you necessarily have to rotate the bar from where I have it setting on the table counter-clockwise so that the ramp flows nicely into your hoods. If you are having trouble wrapping your mind around that, look at the Luxy Bar's ramp section. See how it is closer to being level? Now what would you have to do to get the Woodchipper that way up top? (See what I mean?)
Here is the Luxy Bar on my Badger 29"er. Note how the hoods transition into the bar. (The "ramp" section) Now look at the brake lever tip. Still a great reach from the drops. Even though the Luxy technically has more "drop" than a Woodchipper, the Woodchipper in this case would have the back of the extensions pointing severely downward, and therefore would have more effective drop than this Luxy Bar does.
The Luxy still gives you a slight downward tilt to the drop extensions, but no where near as dramatic as a Woodchipper's. The sweep on both of these bars is effectively the same, and in that sense they feel identical to grip from the saddle.
Conclusions: The differences between these two bars is enough that they are each unique to use. I like the Woodchippers lever set up for single speed use, extension length, sweep, and I really like the width the Woodchipper has between the levers on the tops for grinding out long, seated climbs. The Luxy Bar has a better grip in the hooks, at least to my tastes, and the less severe slope to the drop extensions keeps things more comfortable when I ride on the back end of the extensions. I don't like the narrower tops on the Luxy, and that is a shame, since having a constant 31.8mm grip across that top is sweet. I just wish for more room, but that is a minor nit. Oddly enough, the Luxy Bar seems more compliant than the Pro Moto Woodchipper does. I like that. Shifting a STI lever is actually more pleasant on the Luxy Bar due to the way the levers are canted by the drops. The Woodchipper does come in a bit narrower, and even in a smaller width, (42cm), and in a 25.4mm clamp diameter. More versatility there.
In the end, I would say that the Luxy Bar is a worthy foil to a Woodchipper, which I considered to be the best off road drop before the Luxy Bar hit the scene. Now? It is a toss up. I really like them both, but for different reasons. More ride time on the Luxy Bar may refine my ideas, but for now, I would highly recommend either of these bars for off road pursuits.
Here we have the Luxy Bar out front (330gm) and the Woodchipper in the background (330gm). Although both feature pretty dramatically swept drop sections, the big differences are readily apparent here.
The "flare" outwards of the drops on the Luxy is classic off road drop bar fare. The Woodchipper almost looks like it is bent inwards, (but it isn't, it is a trick of the perspective here), and you can also see the top of the Luxy is 31.8mm all the way across to each drop section. Finally, the Luxy is about 1 1/2" wider over-all from tip to tip, than the Woodchipper. The Luxy is the widest off road drop I know of at 27.5" wide!
Before we leave the front view, I want to point out that the Woodchipper will allow your levers to be the closest to a traditional road bike drop bar set up position that any off road drop bar can offer. The nearly vertical drop section keeps the levers almost straight up and down, albeit canted inwards, so if you value the hood position due to road bike experience, the Woodchipper is closest of anything you'll find next to the Gary II Bar from the first post. (I haven't tried the Gary II yet, but I will get that on a bike soon and give a report when I do.)
As I say, it is really hard to take a photo of a Woodchipper and not make it look bent inwards. Here is my best attempt. The bar makes a slight "S" shape as it drops from the top to the extension, and this area is in-line with the swept extension, as you can sort of make out here. The Luxy Bar has a much more dramatic "S" shape as the bar goes from the top to the extension.
The Luxy Bar lays your levers sideways a bit, and with STI shifting, the levers almost seem like an STI Mountain lever. It is easy to use, but the hoods are canted due to this and may offend those who crave a traditional hoods position. That said, the Luxy sets the hoods up high enough to make the hoods very usable and yet you can grab the brake lever easily from the drops. This is due to the minimal drop the Luxy has.
And here is the shape of the drops, or "hooks". You can see that the Luxy has a generous "reach" or "ramp" area on top. Yet it also has a generous drop extension as well. One very important thing to note here though is how the drop extension and "ramp" are in relation to each other.
On the Woodchipper, the drop extension is not even close to being parallel to the ramp section. This "opened" hook shape means that most Woodchipper set ups will end up having the drop section pointing downwards and back towards the rear axle, or below. This is because in order to get a ramp that you can have any sort of comfortable hand position on, you necessarily have to rotate the bar from where I have it setting on the table counter-clockwise so that the ramp flows nicely into your hoods. If you are having trouble wrapping your mind around that, look at the Luxy Bar's ramp section. See how it is closer to being level? Now what would you have to do to get the Woodchipper that way up top? (See what I mean?)
Here is the Luxy Bar on my Badger 29"er. Note how the hoods transition into the bar. (The "ramp" section) Now look at the brake lever tip. Still a great reach from the drops. Even though the Luxy technically has more "drop" than a Woodchipper, the Woodchipper in this case would have the back of the extensions pointing severely downward, and therefore would have more effective drop than this Luxy Bar does.
The Luxy still gives you a slight downward tilt to the drop extensions, but no where near as dramatic as a Woodchipper's. The sweep on both of these bars is effectively the same, and in that sense they feel identical to grip from the saddle.
Conclusions: The differences between these two bars is enough that they are each unique to use. I like the Woodchippers lever set up for single speed use, extension length, sweep, and I really like the width the Woodchipper has between the levers on the tops for grinding out long, seated climbs. The Luxy Bar has a better grip in the hooks, at least to my tastes, and the less severe slope to the drop extensions keeps things more comfortable when I ride on the back end of the extensions. I don't like the narrower tops on the Luxy, and that is a shame, since having a constant 31.8mm grip across that top is sweet. I just wish for more room, but that is a minor nit. Oddly enough, the Luxy Bar seems more compliant than the Pro Moto Woodchipper does. I like that. Shifting a STI lever is actually more pleasant on the Luxy Bar due to the way the levers are canted by the drops. The Woodchipper does come in a bit narrower, and even in a smaller width, (42cm), and in a 25.4mm clamp diameter. More versatility there.
In the end, I would say that the Luxy Bar is a worthy foil to a Woodchipper, which I considered to be the best off road drop before the Luxy Bar hit the scene. Now? It is a toss up. I really like them both, but for different reasons. More ride time on the Luxy Bar may refine my ideas, but for now, I would highly recommend either of these bars for off road pursuits.
Off Road Drop Bar Comparison: Part II
In my last look at off road drop bars, I did not have a Woodchipper handy to use as a comparison sample, and I also noted it was a heck of a lot different than most bars, other than the new Ragley Bikes Luxy Bar. Well, if you missed that post, you can read it here. This go round, I have a Pro Moto 31.8mm bar clamp diameter 46cm wide Woodchipper and a Luxy Bar to compare head to head with each other. Let's take a quick look.....
Here we have the Luxy Bar out front (330gm) and the Woodchipper in the background (330gm). Although both feature pretty dramatically swept drop sections, the big differences are readily apparent here.
The "flare" outwards of the drops on the Luxy is classic off road drop bar fare. The Woodchipper almost looks like it is bent inwards, (but it isn't, it is a trick of the perspective here), and you can also see the top of the Luxy is 31.8mm all the way across to each drop section. Finally, the Luxy is about 1 1/2" wider over-all from tip to tip, than the Woodchipper. The Luxy is the widest off road drop I know of at 27.5" wide!
Before we leave the front view, I want to point out that the Woodchipper will allow your levers to be the closest to a traditional road bike drop bar set up position that any off road drop bar can offer. The nearly vertical drop section keeps the levers almost straight up and down, albeit canted inwards, so if you value the hood position due to road bike experience, the Woodchipper is closest of anything you'll find next to the Gary II Bar from the first post. (I haven't tried the Gary II yet, but I will get that on a bike soon and give a report when I do.)
As I say, it is really hard to take a photo of a Woodchipper and not make it look bent inwards. Here is my best attempt. The bar makes a slight "S" shape as it drops from the top to the extension, and this area is in-line with the swept extension, as you can sort of make out here. The Luxy Bar has a much more dramatic "S" shape as the bar goes from the top to the extension.
The Luxy Bar lays your levers sideways a bit, and with STI shifting, the levers almost seem like an STI Mountain lever. It is easy to use, but the hoods are canted due to this and may offend those who crave a traditional hoods position. That said, the Luxy sets the hoods up high enough to make the hoods very usable and yet you can grab the brake lever easily from the drops. This is due to the minimal drop the Luxy has.
And here is the shape of the drops, or "hooks". You can see that the Luxy has a generous "reach" or "ramp" area on top. Yet it also has a generous drop extension as well. One very important thing to note here though is how the drop extension and "ramp" are in relation to each other.
On the Woodchipper, the drop extension is not even close to being parallel to the ramp section. This "opened" hook shape means that most Woodchipper set ups will end up having the drop section pointing downwards and back towards the rear axle, or below. This is because in order to get a ramp that you can have any sort of comfortable hand position on, you necessarily have to rotate the bar from where I have it setting on the table counter-clockwise so that the ramp flows nicely into your hoods. If you are having trouble wrapping your mind around that, look at the Luxy Bar's ramp section. See how it is closer to being level? Now what would you have to do to get the Woodchipper that way up top? (See what I mean?)
Here is the Luxy Bar on my Badger 29"er. Note how the hoods transition into the bar. (The "ramp" section) Now look at the brake lever tip. Still a great reach from the drops. Even though the Luxy technically has more "drop" than a Woodchipper, the Woodchipper in this case would have the back of the extensions pointing severely downward, and therefore would have more effective drop than this Luxy Bar does.
The Luxy still gives you a slight downward tilt to the drop extensions, but no where near as dramatic as a Woodchipper's. The sweep on both of these bars is effectively the same, and in that sense they feel identical to grip from the saddle.
Conclusions: The differences between these two bars is enough that they are each unique to use. I like the Woodchippers lever set up for single speed use, extension length, sweep, and I really like the width the Woodchipper has between the levers on the tops for grinding out long, seated climbs. The Luxy Bar has a better grip in the hooks, at least to my tastes, and the less severe slope to the drop extensions keeps things more comfortable when I ride on the back end of the extensions. I don't like the narrower tops on the Luxy, and that is a shame, since having a constant 31.8mm grip across that top is sweet. I just wish for more room, but that is a minor nit. Oddly enough, the Luxy Bar seems more compliant than the Pro Moto Woodchipper does. I like that. Shifting a STI lever is actually more pleasant on the Luxy Bar due to the way the levers are canted by the drops. The Woodchipper does come in a bit narrower, and even in a smaller width, (42cm), and in a 25.4mm clamp diameter. More versatility there.
In the end, I would say that the Luxy Bar is a worthy foil to a Woodchipper, which I considered to be the best off road drop before the Luxy Bar hit the scene. Now? It is a toss up. I really like them both, but for different reasons. More ride time on the Luxy Bar may refine my ideas, but for now, I would highly recommend either of these bars for off road pursuits.
Here we have the Luxy Bar out front (330gm) and the Woodchipper in the background (330gm). Although both feature pretty dramatically swept drop sections, the big differences are readily apparent here.
The "flare" outwards of the drops on the Luxy is classic off road drop bar fare. The Woodchipper almost looks like it is bent inwards, (but it isn't, it is a trick of the perspective here), and you can also see the top of the Luxy is 31.8mm all the way across to each drop section. Finally, the Luxy is about 1 1/2" wider over-all from tip to tip, than the Woodchipper. The Luxy is the widest off road drop I know of at 27.5" wide!
Before we leave the front view, I want to point out that the Woodchipper will allow your levers to be the closest to a traditional road bike drop bar set up position that any off road drop bar can offer. The nearly vertical drop section keeps the levers almost straight up and down, albeit canted inwards, so if you value the hood position due to road bike experience, the Woodchipper is closest of anything you'll find next to the Gary II Bar from the first post. (I haven't tried the Gary II yet, but I will get that on a bike soon and give a report when I do.)
As I say, it is really hard to take a photo of a Woodchipper and not make it look bent inwards. Here is my best attempt. The bar makes a slight "S" shape as it drops from the top to the extension, and this area is in-line with the swept extension, as you can sort of make out here. The Luxy Bar has a much more dramatic "S" shape as the bar goes from the top to the extension.
The Luxy Bar lays your levers sideways a bit, and with STI shifting, the levers almost seem like an STI Mountain lever. It is easy to use, but the hoods are canted due to this and may offend those who crave a traditional hoods position. That said, the Luxy sets the hoods up high enough to make the hoods very usable and yet you can grab the brake lever easily from the drops. This is due to the minimal drop the Luxy has.
And here is the shape of the drops, or "hooks". You can see that the Luxy has a generous "reach" or "ramp" area on top. Yet it also has a generous drop extension as well. One very important thing to note here though is how the drop extension and "ramp" are in relation to each other.
On the Woodchipper, the drop extension is not even close to being parallel to the ramp section. This "opened" hook shape means that most Woodchipper set ups will end up having the drop section pointing downwards and back towards the rear axle, or below. This is because in order to get a ramp that you can have any sort of comfortable hand position on, you necessarily have to rotate the bar from where I have it setting on the table counter-clockwise so that the ramp flows nicely into your hoods. If you are having trouble wrapping your mind around that, look at the Luxy Bar's ramp section. See how it is closer to being level? Now what would you have to do to get the Woodchipper that way up top? (See what I mean?)
Here is the Luxy Bar on my Badger 29"er. Note how the hoods transition into the bar. (The "ramp" section) Now look at the brake lever tip. Still a great reach from the drops. Even though the Luxy technically has more "drop" than a Woodchipper, the Woodchipper in this case would have the back of the extensions pointing severely downward, and therefore would have more effective drop than this Luxy Bar does.
The Luxy still gives you a slight downward tilt to the drop extensions, but no where near as dramatic as a Woodchipper's. The sweep on both of these bars is effectively the same, and in that sense they feel identical to grip from the saddle.
Conclusions: The differences between these two bars is enough that they are each unique to use. I like the Woodchippers lever set up for single speed use, extension length, sweep, and I really like the width the Woodchipper has between the levers on the tops for grinding out long, seated climbs. The Luxy Bar has a better grip in the hooks, at least to my tastes, and the less severe slope to the drop extensions keeps things more comfortable when I ride on the back end of the extensions. I don't like the narrower tops on the Luxy, and that is a shame, since having a constant 31.8mm grip across that top is sweet. I just wish for more room, but that is a minor nit. Oddly enough, the Luxy Bar seems more compliant than the Pro Moto Woodchipper does. I like that. Shifting a STI lever is actually more pleasant on the Luxy Bar due to the way the levers are canted by the drops. The Woodchipper does come in a bit narrower, and even in a smaller width, (42cm), and in a 25.4mm clamp diameter. More versatility there.
In the end, I would say that the Luxy Bar is a worthy foil to a Woodchipper, which I considered to be the best off road drop before the Luxy Bar hit the scene. Now? It is a toss up. I really like them both, but for different reasons. More ride time on the Luxy Bar may refine my ideas, but for now, I would highly recommend either of these bars for off road pursuits.
Monday, February 14, 2011
Of Successes And Failures
<===Confidence betrayed.
As reported last week, I received the Snow Dog's correct Phil Wood hubbed wheel after the Phil Wood & Co. had supposedly repaired it. Well.......it failed.
First few pedal strokes: Pop......snap......pop! Okay.....not so good, but maybe things will smooth over. Well, after riding 5 miles to work, I had almost a dozen instances of loud, popping noises occurring just after coasting, and immediately after pedaling. This indicated to my mind that the pawls were again not properly engaging the ring drive gear.
On the way home, I counted to keep track. 24 instances of popping. This was so loud and hard that you could feel it right through the cranks. It was obviously already blowing up again after 10 miles. That was on Friday. I sent an e-mail to Phil Wood & Co. letting them know, and sometime today I am to hear about their proposed solution. My thoughts are that Phil Wood & Co. have exemplary customer service, (so far), and normally have exemplary products, (I've heard- this is my first experience with them), so I expect more of the same from their end as far as taking care of me. We'll see, and I'll let ya'all know how it goes down.
Speaking of down- I was very, very disappointed Friday about the deal with the hub. It means that The Snow Dog is through as far as riding for the foreseeable future. Of course, so is the snow. With a week's worth of over-freezing temps on tap, the snow is doomed. Already this weekend it has taken a huge hit. Snow for the Snow Dog is going to be gone anyway by the time the wheel gets figured out. Maybe I'll have it back and running for early season off road/muddy duty.
But there still was good riding to be had, and Saturday, with a warmer feel to the air, I got out the Badger and headed out for a bit of gravel travel to clear out the brain. I got out early enough Saturday that the snow was still prevalent on the roads, which made for excellent, smooth, fast going, not unlike a dry, buff B Maintenance road in the summertime.
Some of the drifts from the winter were huge, just like the last couple of years have had, and gravel was hard to come by since there were so many of these big road-side sentinels along my 30 mile route.
The skies were kind of odd Saturday, with a whitish overcast. This blended into the snowy surroundings at times to give the feeling of floating in a white cloud.
Visually it was blinding, and seeing any contrast in the road surface was difficult. At times, I would run into softer snow and the front tire would get pulled off-line, causing a moment or two of panic as I would try to control the bike. No worries though, as I was just fine for the whole ride. No biffs!
<===There is a fine line between being a "hard-azz" and a "dumb-azz"!
I was getting a ton of odd looks from just about everyone I came across on this ride. I know some folks credit us wintertime riders with being some sort of "tough-guys", but I also know that the "General Public" thinks pretty much the opposite. If you ever want to know what the Outcasts of Society feel like sometime, I suggest you come along on a February training ride with me. I promise you, you will find Derision and Contempt staring your way along the roadsides and up and down the city streets. Oh what a feeling!
Well, it was all good for pulling me back out of the dumps and getting my mind on track where it should be. The whole Snow Dog thing will work out eventually.
Tomorrow, I'll have more on the comparisons between the Luxy Bar and Salsa Cycles Woodchipper.
As reported last week, I received the Snow Dog's correct Phil Wood hubbed wheel after the Phil Wood & Co. had supposedly repaired it. Well.......it failed.
First few pedal strokes: Pop......snap......pop! Okay.....not so good, but maybe things will smooth over. Well, after riding 5 miles to work, I had almost a dozen instances of loud, popping noises occurring just after coasting, and immediately after pedaling. This indicated to my mind that the pawls were again not properly engaging the ring drive gear.
On the way home, I counted to keep track. 24 instances of popping. This was so loud and hard that you could feel it right through the cranks. It was obviously already blowing up again after 10 miles. That was on Friday. I sent an e-mail to Phil Wood & Co. letting them know, and sometime today I am to hear about their proposed solution. My thoughts are that Phil Wood & Co. have exemplary customer service, (so far), and normally have exemplary products, (I've heard- this is my first experience with them), so I expect more of the same from their end as far as taking care of me. We'll see, and I'll let ya'all know how it goes down.
Speaking of down- I was very, very disappointed Friday about the deal with the hub. It means that The Snow Dog is through as far as riding for the foreseeable future. Of course, so is the snow. With a week's worth of over-freezing temps on tap, the snow is doomed. Already this weekend it has taken a huge hit. Snow for the Snow Dog is going to be gone anyway by the time the wheel gets figured out. Maybe I'll have it back and running for early season off road/muddy duty.
But there still was good riding to be had, and Saturday, with a warmer feel to the air, I got out the Badger and headed out for a bit of gravel travel to clear out the brain. I got out early enough Saturday that the snow was still prevalent on the roads, which made for excellent, smooth, fast going, not unlike a dry, buff B Maintenance road in the summertime.
Some of the drifts from the winter were huge, just like the last couple of years have had, and gravel was hard to come by since there were so many of these big road-side sentinels along my 30 mile route.
The skies were kind of odd Saturday, with a whitish overcast. This blended into the snowy surroundings at times to give the feeling of floating in a white cloud.
Visually it was blinding, and seeing any contrast in the road surface was difficult. At times, I would run into softer snow and the front tire would get pulled off-line, causing a moment or two of panic as I would try to control the bike. No worries though, as I was just fine for the whole ride. No biffs!
<===There is a fine line between being a "hard-azz" and a "dumb-azz"!
I was getting a ton of odd looks from just about everyone I came across on this ride. I know some folks credit us wintertime riders with being some sort of "tough-guys", but I also know that the "General Public" thinks pretty much the opposite. If you ever want to know what the Outcasts of Society feel like sometime, I suggest you come along on a February training ride with me. I promise you, you will find Derision and Contempt staring your way along the roadsides and up and down the city streets. Oh what a feeling!
Well, it was all good for pulling me back out of the dumps and getting my mind on track where it should be. The whole Snow Dog thing will work out eventually.
Tomorrow, I'll have more on the comparisons between the Luxy Bar and Salsa Cycles Woodchipper.
Of Successes And Failures
<===Confidence betrayed.
As reported last week, I received the Snow Dog's correct Phil Wood hubbed wheel after the Phil Wood & Co. had supposedly repaired it. Well.......it failed.
First few pedal strokes: Pop......snap......pop! Okay.....not so good, but maybe things will smooth over. Well, after riding 5 miles to work, I had almost a dozen instances of loud, popping noises occurring just after coasting, and immediately after pedaling. This indicated to my mind that the pawls were again not properly engaging the ring drive gear.
On the way home, I counted to keep track. 24 instances of popping. This was so loud and hard that you could feel it right through the cranks. It was obviously already blowing up again after 10 miles. That was on Friday. I sent an e-mail to Phil Wood & Co. letting them know, and sometime today I am to hear about their proposed solution. My thoughts are that Phil Wood & Co. have exemplary customer service, (so far), and normally have exemplary products, (I've heard- this is my first experience with them), so I expect more of the same from their end as far as taking care of me. We'll see, and I'll let ya'all know how it goes down.
Speaking of down- I was very, very disappointed Friday about the deal with the hub. It means that The Snow Dog is through as far as riding for the foreseeable future. Of course, so is the snow. With a week's worth of over-freezing temps on tap, the snow is doomed. Already this weekend it has taken a huge hit. Snow for the Snow Dog is going to be gone anyway by the time the wheel gets figured out. Maybe I'll have it back and running for early season off road/muddy duty.
But there still was good riding to be had, and Saturday, with a warmer feel to the air, I got out the Badger and headed out for a bit of gravel travel to clear out the brain. I got out early enough Saturday that the snow was still prevalent on the roads, which made for excellent, smooth, fast going, not unlike a dry, buff B Maintenance road in the summertime.
Some of the drifts from the winter were huge, just like the last couple of years have had, and gravel was hard to come by since there were so many of these big road-side sentinels along my 30 mile route.
The skies were kind of odd Saturday, with a whitish overcast. This blended into the snowy surroundings at times to give the feeling of floating in a white cloud.
Visually it was blinding, and seeing any contrast in the road surface was difficult. At times, I would run into softer snow and the front tire would get pulled off-line, causing a moment or two of panic as I would try to control the bike. No worries though, as I was just fine for the whole ride. No biffs!
<===There is a fine line between being a "hard-azz" and a "dumb-azz"!
I was getting a ton of odd looks from just about everyone I came across on this ride. I know some folks credit us wintertime riders with being some sort of "tough-guys", but I also know that the "General Public" thinks pretty much the opposite. If you ever want to know what the Outcasts of Society feel like sometime, I suggest you come along on a February training ride with me. I promise you, you will find Derision and Contempt staring your way along the roadsides and up and down the city streets. Oh what a feeling!
Well, it was all good for pulling me back out of the dumps and getting my mind on track where it should be. The whole Snow Dog thing will work out eventually.
Tomorrow, I'll have more on the comparisons between the Luxy Bar and Salsa Cycles Woodchipper.
As reported last week, I received the Snow Dog's correct Phil Wood hubbed wheel after the Phil Wood & Co. had supposedly repaired it. Well.......it failed.
First few pedal strokes: Pop......snap......pop! Okay.....not so good, but maybe things will smooth over. Well, after riding 5 miles to work, I had almost a dozen instances of loud, popping noises occurring just after coasting, and immediately after pedaling. This indicated to my mind that the pawls were again not properly engaging the ring drive gear.
On the way home, I counted to keep track. 24 instances of popping. This was so loud and hard that you could feel it right through the cranks. It was obviously already blowing up again after 10 miles. That was on Friday. I sent an e-mail to Phil Wood & Co. letting them know, and sometime today I am to hear about their proposed solution. My thoughts are that Phil Wood & Co. have exemplary customer service, (so far), and normally have exemplary products, (I've heard- this is my first experience with them), so I expect more of the same from their end as far as taking care of me. We'll see, and I'll let ya'all know how it goes down.
Speaking of down- I was very, very disappointed Friday about the deal with the hub. It means that The Snow Dog is through as far as riding for the foreseeable future. Of course, so is the snow. With a week's worth of over-freezing temps on tap, the snow is doomed. Already this weekend it has taken a huge hit. Snow for the Snow Dog is going to be gone anyway by the time the wheel gets figured out. Maybe I'll have it back and running for early season off road/muddy duty.
But there still was good riding to be had, and Saturday, with a warmer feel to the air, I got out the Badger and headed out for a bit of gravel travel to clear out the brain. I got out early enough Saturday that the snow was still prevalent on the roads, which made for excellent, smooth, fast going, not unlike a dry, buff B Maintenance road in the summertime.
Some of the drifts from the winter were huge, just like the last couple of years have had, and gravel was hard to come by since there were so many of these big road-side sentinels along my 30 mile route.
The skies were kind of odd Saturday, with a whitish overcast. This blended into the snowy surroundings at times to give the feeling of floating in a white cloud.
Visually it was blinding, and seeing any contrast in the road surface was difficult. At times, I would run into softer snow and the front tire would get pulled off-line, causing a moment or two of panic as I would try to control the bike. No worries though, as I was just fine for the whole ride. No biffs!
<===There is a fine line between being a "hard-azz" and a "dumb-azz"!
I was getting a ton of odd looks from just about everyone I came across on this ride. I know some folks credit us wintertime riders with being some sort of "tough-guys", but I also know that the "General Public" thinks pretty much the opposite. If you ever want to know what the Outcasts of Society feel like sometime, I suggest you come along on a February training ride with me. I promise you, you will find Derision and Contempt staring your way along the roadsides and up and down the city streets. Oh what a feeling!
Well, it was all good for pulling me back out of the dumps and getting my mind on track where it should be. The whole Snow Dog thing will work out eventually.
Tomorrow, I'll have more on the comparisons between the Luxy Bar and Salsa Cycles Woodchipper.
Subscribe to:
Posts (Atom)


