Showing posts with label Fuel-Pack. Show all posts
Showing posts with label Fuel-Pack. Show all posts

Tuesday, July 09, 2024

Review: Ortlieb Fuel-Pack & Toptube-Bag - Final Word

The Fuel-Pack mounted using the Toptube-Bag removable base.
Note: Ortleib sent over their Fuel-Pack and Toptube-Bag for test and review at no charge to Guitar Ted Productions. I am not being paid, nor bribed, for this review and I will always strive to give you my honest thoughts and opinions throughout. 

In my last update on this Ortlieb bag review I asked the question, "What about cross-breeding these two bags? Maybe I could use the fact that the two bags use the two-bolt top tube bag mount standard, swap the base from the Toptube-Bag to the Fuel-Pack, and then I could have the bag I really want? "

So, that is what I did. This is only possible because the Toptube-Bag and the Fuel-Pack use the same two-bolt mount pattern for the bottom of each bag. The idea here was to use the removable base from the Toptube-Bag and swap that over to the Fuel-Pack. Then the Fuel-Pack could snap into the fixed base already mounted to my bike. 

Here you can see the removable base plate screwed onto the Fuel-Pack using all provided hardware from Ortlieb.

After the swap it was a simple click-in procedure to mount the Fuel-Pack securely onto my bike.

Riding with the Toptube-Bag was okay until I had to stand to sprint or climb. It was then that I noticed my legs grazing the back corners of the bag at times. Of course, I already mentioned the dismount difficulties due to the size of the Toptube-Bag. The Fuel-Pack, in contrast, is tapered and smaller than the Toptube-Bag and therefore it stays out of the way on standing eforts and mostly stays out of te way on dismounts. 

However; the Fuel-Pack isn't as smooth when it comes to closing the magnetic lid while riding. The bag has always had a slightly misshapen look ever since I received it, and part of this is due to how the "lid" and webbing are sewn or bonded together. 

The front/right corner seems to want to overlap oddly and not close .

It seems the front/right corner of the bottom part of the bag sticks out oddly and the upper right corner of the 'lid' seems to want to fold back and down slightly. This almost always ends up causing the foremost magnet to not land in its pocket. I have to tap the lid with my hand to get it to close rightly. 

Besides that, the bag now is solidly attached to the bike and does not want to rotate around the top tube at all. The bag is big enough, being fairly close in size to most other top tube bags I have here, and it looks classy with its sand color on my dark blue Noble GX5. 

I have the bag that works as I would expect now. Not too big that it gets in teh way, solidly attached, and removable to boot. That said, the lid closure isn't as smooth as it should be. The base looks a bit clunky with those straps and all. Plus, I'm not used to seeing a top tube bag not nestled up against the stem and steer tube. The last thing I can get over, the other two things? 

Final Word: I'm not sure that you can get a Fuel-Pack with the Toptube-Bag's base plate and removable mount. But if you want a bag the size of the Fuel-Pak, its stock mounting system is pretty poor, unless you have the option to bolt the bag on. That or you'd have to have a wide, more rectangular than round carbon or aluminum top tube on your bike.  Then the Fuel-Pack mounts may be okay. 

The Toptube-Bag is just too rectangular. Too big. I would think that you'd maybe get along with it if you are on an XL sized bike. Smaller riders with short top tubes will find this harder to get along with than I did, I would imagine. If that bag was tapered toward the rider, maybe then it would be okay. 

The Fuel-Pack never really ever "sat" right.

The Fuel-Pack just never really ever seemed to sit right on my bikes. It always was misshapen in some way, unlike the Toptube-Bag which always looked "right" in terms of shape. I was constantly trying to smooth out the top of the Fuel-Pack to make it look "right" and not wrinkled or bloated up in the middle of its lid. 

I loved the magnetic lid pockets!  This part of the design blows all the other magnetic lid bags I've tried or seen out of the water. It is by far the best thing about either bag. 

The fabrics used are great. I liked that Ortlieb thoughtfully put a Velcro strip on the inside floor liner to hold it down after you get done accessing the mounting holes. The softer, lofted fabric floor also keeps harder objects from rattling off your top tube as well. A very nice touch there. 

The fabrics are waterproofed and Ortlieb's commitment to reducing the carbon footprint of their manufacturing processes is commendable. I appreciated that Ortlieb can actually ascertain this data and allow the rider to know when they have accumulated enough miles to offset that carbon footprint. Ortlieb is one of the few companies in the World providing us this type of information, and that doesn't go unnoticed. 

That all said, I believe that these two products need a little fine-tuning. The removable base idea should be standard across their range of top tube bags. The two-bolt mounting option is great, but the implementation of the "stand-off" mounts on the Fuel-Pack are not effective in the real-world use of that bag. The Toptube-Bag could use refining as well. The shape of that bag is going to be difficult for many riders and I think either a tapering of the bag's shape, or shortening of it a bit, or both things, would go a long way toward making it a better bag. Perhaps making another Fuel-Pack in a bit smaller size wouldn't be a bad option either. 

There are good things here, but in my estimation, the bags need refinement before I would recommend them.

Monday, July 01, 2024

Review: Ortlieb Fuel-Pack & Toptube-Bag - Mid-Term

  Note: Ortleib sent over their Fuel-Pack and Toptube-Bag for test and review at no charge to Guitar Ted Productions. I am not being paid, nor bribed, for this review and I will always strive to give you my honest thoughts and opinions throughout. 

This is the second installment of the Ortlieb bag review. The introduction and first impressions can be seen by clicking HERE. 

This post will be focused on how the Toptube-Bag fared on a recent ride and how the Fuel-Pack has "evolved" to make it work for my bicycles. First up, the Toptube-Bag.

This bag and its removable feature utilizes a snap-in base with a spring-loaded release. The base is the part that straps to your bike while the matching rail which attaches via the two-bolt hole standard, is attached to the bag. Together they work to provide a rock-solid base for the Toptube-Bag and one that is stable despite the lack of any attaching strap around the head tube/steerer area, which is common for bags like this. 

So, you can load this bag up and it will not rotate around the top tube, nor does it move when you open the magnetically closed top flap. I found the bag easy to get into and it closes with a reassuring 'snap!' when you flip the lid closed. I was also happy to find that a crosswind was unable to flip the top open, which I have had happen on two other bags with magnetic closures. 

The base without the bag mounted on it.

This bag is pretty big. Almost too big for me, and I wonder if it wouldn't be a problem for riders of smaller stature. Many bags that sit on top tubes taper toward the back end of the bike in profile and in width to accommodate dismounting riders, and legs moving alongside when standing and climbing, or accelerating. My legs slightly grazed the sides of the Toptube-Bag when standing and pedaling. I also had several instances where I jumped off the saddle at a stop and I smashed the Toptube-Bag a bit. 

Part of the problem is that due to this design the bag has to sit back from the head tube a bit more than a typical top tube bag would. But besides those issues, the bag works great. It has a cavernous interior which my smartphone could lay flat in. You could probably get a lot of packable rain jackets inside this bag, for instance. It's just a big volume top tube bag.

The Fuel-Pack was just not viable as sent. This was mostly due to how Ortlieb designed the mount, which set the bag, essentially on stand-offs, in a position where it was easy to rotate the bag around the top tube of any bike I put it on. Now - mind you - almost every bike I own has a round cross-section metal top tube. So there is that. 

The bag mounts are supposed to be held on with silicone rubber straps, but these straps are made from a material that is more plastic than rubber and this doesn't help when you are relying upon friction to stabilize the bag. Furthermore, the hooks the straps were to anchor to were pointed upward into the base of the Fuel-Pack making it almost impossible to strap on the bag. I could do it, but it was a lot harder than it should be to get the bag on the bike. 

So, I ditched the straps Ortlieb sent and modified the plastic base pieces a bit. Then I used Velcro strips and laced these through the plastic base pieces. The Velcro strips made it far easier to mount the bag, but the rotation issue was still there. So, I punched a couple holes into the front of the Fuel-Pack with my hole punch pliers I have and laced a Nylon string through the front, went around the stem/steer tube, and tied it on to stabilize the bag. 

That solved that issue, but there still is one more thing about this bag that was rather surprising, honestly, and that was that it would not ever hold its shape, Not when new out of the box, nor will it do so now. It isn't a 'bad' thing necessarily, but contrast this with the Toptube-Bag which stays perfectly rectangular even after I inadvertently smash it while dismounting, and the Fuel-Pack seems a step below that. 

The Next Step: So, now what? The Toptube-Bag is too big, really, but has this fantastic, stable base. The Fuel-Pack is a much better size but has a dismal mounting system that just wasn't going to work on my bikes. Well.....

What about cross-breeding these two bags? Maybe I could use the fact that the two bags use the two-bolt top tube bag mount standard, swap the base from the Toptube-Bag to the Fuel-Pack, and then I could have the bag I really want? 

Stay tuned............