The short story, in case you don't go back to read the first post on this, is that I wanted to rebuild the Buzzard, but not as a trail bike. I am going with a "bikepacking/Pugsley" idea, where the rear and front wheels will be interchangeable.
The first order of business was to rebuild the single speed rear hub I have, which was laced to a 26" Marge Lite rim, as seen in the image above/left here. (depending on which platform you are viewing the blog on)
Then, since I wanted to reuse the On One Chunky Monkey 29" x 2.4" tires, I had to clean out all the old sealant. Let me tell you, there was a lot of 'skin to peel' off! But it came out swell, and the tire looked great, even if it is about a dozen years old! By the way, I will have to do the same with the rear, but I haven't gotten around to it quite yet.
With the tire cleaned up, and the 29" Dually rim rebuilt onto the single speed hub, I had to re-tape the rim, and I decided that for now I would insert a tube. This will press the tape down nice and evenly onto the rim's inner walls, and suffice for the time being to test out the idea. If things pan out, I will set up the bike tubeless, or maybe I'll go TPU. We will see when, and if, I get to this point what I decide.
 |
| The second mock-up looks more promising. I think I am warming up to this idea! |
So there is what I have so far. I like what I am seeing now much better. A few points to note here:
- The seat height is correct, so I am happy with the saddle-to-bar drop I am seeing without adding more spacers. The fact that this fork was made for a first generation titanium Mukluk helps in that the steer tube was extra long.
- Speaking of that Enabler fork, this is the key to the entire idea being worthwhile, in my opinion. The context here is that Salsa, for better or worse, based the first iterations of their fat bike on the Surly Pugsley, which had as one of its central ideas the interchangeable front and rear wheel feature. This was done to allow for a "bail-out" option where a failed derailleur or frozen up free hub could be swapped out as an entire wheel assembly for your front wheel which would have a single speed free wheel mounted, or a fixed cog. (Or if you went with only a rear brake, both fixed and free wheel single speed options!) This meant that the Enabler fork was designed with a 135mm, rear brake specific, quick release drop out spacing. The same as the rear of the Singular Buzzard.
- The Velo Orange Utility Bar and Utility Rack will be utilized for water bottle mounts as well as cargo-carrying duties. The original set up on the Buzzard was predicated on a MTB usage which was based upon the assumption a rider would be using a hydration pack. This one-bottle set up was not going to cut it as a bikepacking rig, so the additional capacity for the Utility Bar and Rack to handle water bottles is a boon here. Obviously the Enabler Fork also adds two water bottle mounts. So water carrying needs are all covered here.
- I will make use of a Topeak rear seat bag/dry bag carrier for more cargo capacity when necessary. I will also be looking to add a "gas tank" style top tube bag.
- The drive train will be a 2X 11 speed set up utilizing an XTR shifter and rear derailleur which I was gifted by N.Y. Roll. (The current STX rear mech will be replaced).
There will be a lot of details to take care of before I get this thing up and running, so I am far from the finish line with this project. However; I am encouraged by the outcome so far. If you have any comments or suggestions, I would welcome them.
Stay tuned....
No comments:
Post a Comment