Showing posts with label Delium Tires. Show all posts
Showing posts with label Delium Tires. Show all posts

Wednesday, August 21, 2024

Review: Delium Tires - Final Word

  Note: Delium Tire sent over two pairs of tires to Guitar Ted Productions at no cost. I am not being paid, nor bribed, for this review and I will always strive to give my honest thoughts and opinions throughout.

Delium Tire is a fairly unknown name in bicycle tires to most riders, and likely to you as well. The company is based in Indonesia and claims to be that country's largest tire producer. I am told that Delium Tire has made tires under other, more well known to cyclists brands, but I have no idea which brands that those might be. 

Does Delium have what it will take to move brands like Maxxis, WTB, Specialized, or Schwalbe off a bit to make room for sales for their gravel tires? 

Certainly the prices for their tires doesn't hurt in that cause. However; while there are certain good things about the Delium gravel tires I have tried here, there are some definite concerns as well. 

You can read a bit about those concerns HERE in my last update. There is a link in that post to the introduction with the specs and prices as well which you can check out. In this final post I am going to give you a bit more on the riding performance of the AllRounder and Speed-X tires. Then I will give my final verdict on the tires at the end.

Both sets of Delium Tires ended up feeling fast and well damped on gravel.

Okay, so out of the two sets of tires I received for this review I ended up liking the Speed-X the best. The AllRounder, the tire that looks so close to a Gravel King SK it is scary, was a bit too rounded in profile for my liking. I thought the rounded casing made the tire feel unstable and it had trouble in looser gravel and wet mud laterally, losing grip and sliding sideways, or getting kicked sideways by a bigger rock, for instance. I will say this tire felt fast and easy to spin up. I will give the AllRounder that much. 

The Speed-X was a more stable tire in the same conditions and it had a really nice ability to absorb rock and therefore it felt very smooth. I think the AllRounder has a similar casing, but the rounded profile the tire has sort of extinguishes its abilities in this regard. 

I probably could live with either tire in terms of ride quality though. Both exceed expectations for a tire costing as little as these do. However; one characteristic of both tires is a bit concerning to me. This would be the ability, or lack thereof, for these tires to retain air pressure. 

Initially both sets weren't good in this regard. However; as I tended to want to ride the Speed-X more, I thought I had ridden the tire enough that air retention was no issue. Then I parked that bike and got on the AllRounder which, as I expected, had almost zero air pressure in them after about a month. I rode the AllRounder a few times and checked on the Speed-X and.... The back tire was flat! Maddening. The front had air but was down significantly as well. 

The AllRounder copies the Gravel King right down to how it throws small stones.

I guess you are good to go if you ride the Deliums every day or nearly so, but let the bike sit for a week and the tires loose a significant amount of air. By the way, I'm using WTB sealant which has proven to work really well in every other application I have used the sealant in before. 

Final Word: I really like the Speed-X tires, and if they held air better I would highly recommend these. For the asking price these tires definitely ride and perform on gravel better than you would expect. The AllRounder is, as the name suggests, "round" in profile. Too much so for my tastes. This doesn't mean other folks might not like this tire, but given the poor air retention issues I am seeing, I find it hard to recommend these tires. And then again - why not just buy a Gravel King SK and be done with it?

So, from where I sit, Delium has work to do to crack the crowded market for gravel tires. I would suggest working on a better tubeless set up experience, better air retention, and maybe ditch the AllRounder for a design of their own. These tires are not bad tires. These tires do have some undesirable quirks and because of that, I think these are a pass for gravel riders as they are now. If Delium decides to pursue the issues I am seeing and address them in new models, I might then be of a mind to change my view on their tires. 

Note: I wrote this final take several days ago. Since then both sets of tires seem to be holding air better. Go figure! Well, at any rate, even if this seems to hold up, the tires are inconsistent and take far too long to settle in. I may come back with an update at some point.....

Tuesday, July 23, 2024

Review: Delium Tires - Mid-Term

 Note: Delium Tire sent over two pairs of tires to Guitar Ted Productions at no cost. I am not being paid, nor bribed, for this review and I will always strive to give my honest thoughts and opinions throughout.

A few weeks ago I received these Delium Tires and now that I have ridden them in some I have a bit more to share on them. If you missed my introduction to these tires you can find that HERE. Keeping in mind that these tires are more of a value oriented type tire I will be adjusting my review take slightly to accommodate that fact. These tires aren't equal to tires costing much more. They should do a decent job for those who cannot, or will not, spend a lot on tires. This is my expectation for the Delium Tires. 

In this post I will cover how the tires have been to 'live with' and how they have been performing so far in my testing. I would assume these tires would be upgrades from a stock entry level gravel bike, and perhaps going home to a first time tubeless user as well. The review will take a viewpoint from such a stance. 

Alright, let's take on that very derivative AllRounder model then. This 700c X 43mm tire is a dead-ringer for a Panaracer Gravel King SK. I happen to have a set of 650B X 50mm Gravel King SK's on a set of wheels in my possession, and so I was able to make a direct comparison. The resemblance is uncanny. So, does this AllRounder do the Panaracer dance? Well.....yes, sort of. 

It will fling a bit of small stone, it does pack up with tacky mud/dirt when that is encountered, and it rides well enough. So, in many ways, the experience is similar. However; you have that break-in period to get through which might be a bit depressing as this tire felt odd. Like a dragging brake was causing you to work a tiny bit harder. But miraculously the feeling changed during one ride recently and the tire felt just average from that point onward. 

Weird! But I'll take it. I tried the roll-down test again and it performed slightly better. What is going on here? My belief is the tire casing, which is fairly stiff when new, broke in and became ever so slightly more supple.
 

Now on to the Speed-X which has some slight similarities to a WTB Riddler. This tire, ironically, never felt 'draggy' like the AllRounder did. This tire did have a LOT of those mold-release "whiskers" on them which made the tire perform below average initially on the roll-down test. Once I rode the "shine" off them though, these tires picked up a lot on the roll-down test and are fairly impressive in that regard now. 

This tire also seems to have a bit better grip in hardpack corners and it also has a flatter crown which I prefer in loose, deep gravel. The ride is supple for such an inexpensive tire. (Same with the AllRounder) But both tires have a couple of traits that are a bit concerning.

One I mentioned already, and that is initial tubeless set up. Frankly, these tires would probably frustrate a new-to-tubeless user so badly that they'd likely swear off tubeless for good. I've set hundreds of different bicycle tires up tubeless and these Delium tires are some of the most difficult to set up tubeless I've ever dealt with. 

Then there is air retention. The Delium tires are not great in this regard, and each model has displayed a tendency to lose all of its air in the span of a few days time. One tire from each pair, so I am watching for this so as to see if it maybe is an actual characteristic of Delium gravel tires or if I just hit the flat tire jackpot within two days time. We will see.... 

So Far... Okay, I like the ride quality and the handling of these tires is fine, really. But these issues with the casings being hard to set up tubeless and the mysterious loss of air I noted in two of the tires is a bit concerning. Stay tuned for a few more weeks and I hope to get to the bottom of it all and have a final verdict for all of you that may be interested in these tires.

Monday, July 08, 2024

Delium Tires: First Impressions

 Note: Delium Tire sent over two pairs of tires to Guitar Ted Productions at no cost. I am not being paid, nor bribed, for this review and I will always strive to give my honest thoughts and opinions throughout.

Last week was "New Tire Week" here and I had a triple post day on Wednesday. I don't think that has happened since the Trans Iowa days of the late 00's. 

Anyway, if you missed the Delium Tire introduction, you can find that HERE. 

In this post I will cover installation, initial widths observed, and I will end on my initial ride impressions for each tire. Throughout all of my experiences so far, the one thing I keep remembering is that these tires cost $49.99 each. Most gravel tires these days are at a suggested retail of 10 to 30 dollars (and higher) a piece more than this. That matters. Keep this in mind as I go along. 

Installation Impressions:  

Expectations for how tires will set up tubeless have changed over the last several years. Especially so since my earliest forays into setting up 29"er tires tubeless in 2007. Now we have systems, better manufacturing tolerances, and better designs in tires and rims. (Hookless rims notwithstanding) That said, not every experience setting up tires tubeless is going to go well. 

Such was the case with the Delium tires in this review. I have identified the issues that made it so that the only way these tires will mount correctly on a rim is with an air compressor. First off, the casings feel 'plasticky' and are not very compliant. This might be due to the quality of rubber Delium used here and it probably has a lot to do with the sidewall protection layer as well. Today's best puncture protection layers are almost as compliant as the non-puncture protected casings have been. So it stands to reason that a less expensive design, materials, or both that may affect the mounting experience were employed here.

AllRounder 700 X 43mm:

After mounting this tire to my Shimano GRX wheels I mounted those wheels to my Black Mountain Cycles MCD and went for an initial test ride. I aired up these tires to about 35psi. which allowed for a bit of 'sag' in the casings. I thought that these tires looked too narrow to be 43mm wide and with their rather rounded profile they looked like a fat road racer tire. 

That said, they ended up measuring out at just a tic under 43mm at 42.98mm, So, given that this measurement was taken right after the initial mounting, I think it is safe to assume that the AllRounder is what it is marked as far as width goes. 

The tires are very quiet, which was interesting. I also could not get away from the nagging sensation that these tires felt 'draggy', like a brake pad was laying against a rotor. But maybe this was just a first impression thing. I've learned that many times you will come away from something with an entirely different outlook if you try it a few times rather than just once. I also noted that this tire rode very smoothly.

On to the roll-down tests. The AllRounder came up in the lower half of "average" on the pavement section. On the gravel section it came up just a bit worse with a below average result. I will revisit this after a bit for several reasons, but one being that my test track has taken on some rain of late making the gravel portion a bit soft. With the more rounded casing of the AllRounder, this caused the tire to cut in more than roll over. So, look for this test to be done again in the next update. 

Speed-X 700 X 40mm:

The very same experience setting up the tires was had with the Speed-X as I had with the AllRounder. Get an air compressor and these tires come onto the rim as they should. This isn't ideal for many folks, and it isn't what I would expect in 2024. These days it is something of a miss if your tubeless tire doesn't mount with a standard floor pump. That's my take, at any rate. 

The Speed-X showed a flatter profile than the AllRounder and it looked like a 40mm tire as well. I ended up with a slightly wider tire than marked at 41+mm wide. However; I am using a Blunt SS rim from Velocity which is 26+mm wide internally, so that is affecting the outcome on the tire width as well. 

The roll down test was slightly below average on the paved portion of the course and at the lower end of the average range on the gravel portion of the test. Ride quality was exactly as it was with the AllRounder - Very smooth, but I did not notice that annoying 'draggy' feeling as I had with the AllRounder. 

Note how the tread design grabs little things?

So Far...

Again, these are budget-friendly retail priced tires and I do not believe you are going to get premium materials and design in a bicycle tire without the tires costing a lot more than $49.99 each. That said, I have, as mentioned in the opener post, tested similarly priced tires with a similar intention from American Classic. So, I will draw my comparisons from those tires. 

The Good:

Both tires were really smooth and quiet riding tires. Perhaps the unique Dual Zone casing construction Delium is using has merit. The way the tires mounted I wouldn't have suspected that they would be anything other than harsh  feeling. That turned out not to be the case at all.

Both tires come out at advertised width, which is refreshing to see. This was better than the competition's tires I tested. I will continue to monitor the width to see if the casings stretch any and I will report back in my next update.

Air retention seems to be at least 'normal' for tubeless tires. I will revisit this also in an upcoming post. 

The Not-So-Good:

Mounting these is not happening without an air compressor. I doubt that even those fancy floor pumps with a tubeless mounting blast could handle these tires, as it took a few seconds of high pressure air to get these to behave. Even a high-flow tubeless valve didn't help. The Delium tires are some of the most difficult tires to mount tubeless I have come across recently. 

These tires don't have the greatest initial roll-down results. That may change with some miles put in on them. So, stay tuned for a possible change here.  

That 'draggy' feeling of the AllRounder was not fun. I hope that this changes as the tire breaks in. 

Stay tuned for an update in a few weeks....

Wednesday, July 03, 2024

Delium Tire Introduction

Delium Tire AllRounder and Speed-X Tires.
Review of Delium Tire AllRounder and Speed-X Tires:

Last April news broke at Sea Otter that a new tire company, (well...new in the sense that most people hadn't heard of this company before), was going to offer some new gravel tires. I was asked if I wanted to review some of them, so I agreed and Delium Tire sent over two sets of tires at no cost to me for testing and review. 

The new tires are the Speed-X and the AllRounder. The tires got a first look from me in my Sea Otter post HERE. (Scroll down to the bottom of that post) 

I was hoping that Delium would have the 50mm tires by this time but that is still not the case yet, So, I asked for and received the AllRounder in the 43mm size and the Speed-X in the 40mm size. 

What It Is: Delium is doing a bit of a different take on casing construction. They have what they call a "Dual Zone" construction with the casing having sidewall protection from the beads to about halfway up the side wall. Then a more supple construction from that point over the top of the tire is there which is supposed to lend a bit more compliance, and therefore comfort, to the rider. It is kind of hard to imagine so I grabbed this following graphic from Delium's site to help illustrate this concept.

Image courtesy of Delium Tire

This construction and compound application is the same for both tires I have in for this review. Both tires cost a very reasonable $49.99 each, So, the only differences are the width and the tread patterns here. Let's take a closer look at each tire and I'll give my take on these designs. 

The AllRounder First Impressions:

This is the tire that has some strong "Gravel King" vibes. It features squared off knobs, smaller in size, but which stand proud of the casing enough to provide some grip. The shoulders feature lateral bars which one would assume are there for lateral stability and some cornering grip. 

The 43mm casing width (claimed) is also very much in the ball park for the tire this AllRounder resembles. The design of this tire is familiar looking and if the trend holds true through to riding performance I expect that this tire will do well, albeit that it may be prone to a bit of 'stone flinging', as similarly treaded tires I have tried will do. It seems that the central small, squared off knob pattern tends to grip little stones like fingers and then fling them up into the air as you ride. We will see if the AllRounder follows in this trait. 

Weight: 492gm/495gm

The Speed-X First Impressions:

This tire is very reminiscent of a few tires I have tried which feature very low-tread centers with bigger knobbed shoulders. Tires like WTB's Raddler, or the Maxxis Rambler tires come to mind. This Speed-X is in that ballpark, so I expect a fast roll but good cornering traits and possibly a little more weight due to the heavier side knobs. 

Weight: 502gm/496gm.

The tires will be set up tubeless, of course, and in my next post in this review I will get to how that went and how the first rides went as well. The plan is to set the Speed-X tires up on my Honeman Flyer and the AllRounders on the Standard Rando v2. 

So Far... At a suggested retail of $49.99 each, these tires fall into a category that has not got many competitors, unless you are scoring some great deals on tires, which is a distinct possibility these days. But as for a direct comparison on price, only the American Classic tires come to mind immediately. I tested some American Classic Kimberlite 700 X 40mm tires back in 2022. So, as I compare the two brands, keep in mind that the Kimberlite was a low-treaded, semi-slick tire. 

When I look at weight, the American Classic tires are slightly heavier. Those Kimberlites weighed in at about 506 grams a piece. The big difference could be in width, because the American Classic tires were really 38's, not 40's, at least the pair I tested were never 40mm wide. So, if the Delium tires here can best that by being their claimed width, then we have something to celebrate. 

Then we have ride feel and performance to test out. The Delium tires could prove to be really good, or not. But that is the point here, right? To find out what we have going on with these new tires on the market. But beyond that, we also need to consider whether or not the company is committed to the market. That may seem obvious, but in reality, it isn't. I have tested tires before from companies that produced some enticing models and then pulled out of the US market. Rubino and Hutchinson come to mind. Then there was Vee Tire, who dropped a model of gravel tire and then never really made it available. Same with Tioga. So, will Delium tire join that list? Let's hope not. 

Stay tuned for the next update on this review coming soon, and for breaking news on more tires, which will have dropped here on the blog today after 9:00am CST.

Friday, April 19, 2024

Friday News And Views

Image courtesy of Rivendell Bikes

 A Corpulent Sea Otter Edition

Seven Speed Specific Hub From Rivendell:

I found this on Instagram recently. A seven speed specific rear hub from Rivedell. Why, in an era of 12 speed rear cassettes, would anyone want a seven speed hub? 

Well, if you asked that, glad you asked, because I can think of several reasons why you'd want this. 

First of all, and less obvious, these hubs have a shorter cassette body, just like the original 7 speed cassette hubs of the 1980's, and that allowed Rivendell to spec a wider hub flange spacing. This allows for a stronger, more reliable wheel, especially for carrying loads. Secondly, seven speed components, like the chain and cassette, have more material than current 11 and 12 speed chains and cassettes which is advantageous from a wear standpoint. Finally, if you get the right sort of cassettes, they can have shifting ramps that stand more proud from the cassette cog enabling better shifting under loads and longer wear as well. 

The Rivendell rear hub is available in silver and a light green anodized hue as shown. The cost is a reasonable $170.00 and they weigh  a claimed 314 grams. I'm not sure if there is a matching green ano front hub, and yes- rim brake only. This is Rivendell, after all. 

Image courtesy of Cane Creek

Cane Creek Debuts Invert Gravel Suspension Fork:

Monday of this week news dropped concerning the new Cane Creek Invert, a gravel suspension fork Cane Creek claims is the "first gravel suspension fork". 

Using a novel combination of a uni-crown style carbon crown and carbon steer tube mated to aluminum uppers and lowers, this fork utilizes an inverted telescopic design, thus the name, "Invert". 

Two models are in the range, one with lock-out, one without. The fork utilizes an air spring, oil bath lubrication, but no damper system as Cane Creek believes that things happen so quickly on gravel with regard to shock absorbing duties that a damper cannot keep up. In fact, their testing showed that a fork in prototype form utilizing a damper was not as satisfactory as one without. 

The travel is limited, as it is with all telescopic "gravel" suspension designs, to either 30mm or 40mm of travel. This forces the axle to crown to be at 425mm for the 30mm travel option, or 435 for the 40mm travel option. So, unless your gravel bike is designed for suspension forks, this will mess with your fit and handling to a degree. Most non-suspension designs for gravel will have an axle to crown of around 400mm, plus or minus a few millimeters.  

Cost is $1,099.00 for the Invert with no lockout, the lightest at 990 grams claimed weight, or $1,199.00 for the lock-out version which weighs a claimed 1,113 grams. 

Comments: Again, this is a telescopic fork, and I will refer you to what I wrote earlier about such forks HERE if you want my full-take on why these types of forks are not ideal for gravel use. I am not saying this, or any other telescopic gravel suspension fork will not work for gravel riders. I am saying this is not the best option for gravel. (See that link for why that is, if you want more on my thoughts) 

I will also point out here that - yes - the Invert has a service interval of every 50 hours for an "oil flush" and every 100 hours for "Full Service". So, keep that in mind when you are thinking about this option. Just to remind you, suspension stems do not have such limitations. Finally, while Cane Creek is to be commended for reducing the weight of this fork to a level that mimics a steel, uni-crown rigid gravel fork, the Lauf Grit weighs a claimed 936 grams right out of the box. Cane Creek is basing their claims on a cut, 165mm steer tube, so it is close to a Lauf but not quite, and the Lauf is maintenance free. 

Carbon Piedmont wheels Image courtesy of e'Thirteen

e'Thirteen Debuts New Piedmont Gravel Wheels:

Known more for their MTB components, e'Thirteen have just announced new Piedmont Gravel wheel sets in alloy and carbon. 

Utilizing straight-pull hubs with a 4 pawl, 3° engagement, the new rims are now 26mm inner rim width on the carbon and 24mm in alloy. The rims use a proprietary Quick Fill valve stem which is provided with the wheels.

The carbon rims have a 31mm profile height, are made from high-modulus carbon fiber with a hookless bead design, and have a lifetime warranty. The carbon rims weigh in at 340 grams each. Wheel set weight is estimated at 1400 grams for the set. 

The alloy rims have a 19.5mm profile height and weigh in at 415 grams each. The alloy rims are also a hookless design. Wheel set weight is estimated at 1500 grams a set. Hubs are identical on each set and the spokes are Sapim D-Lites at 24 count front and rear for both wheel models. The front hub is convertible with the supplied alloy end caps to be either 15mm or 12mm through axle compatible while the rear is a 142mm X 12mm only.

Prices are $1,679.90 for the carbon versions and $749.90 for the alloy versions. 

Image courtesy of Kona Bikes

Kona Ouroboros - Carbon Drop Bar Bike:

Kona announced a new model on Wednesday called the Ouroboros, a front suspended carbon framed "gravel/MTB" bike. 

Using the the Fox TC32 on the entry level $3,799.00 model and the Rock Shox Rudy XPLR Charger Race Day (really?!) fork on the range-topping $6,999.00 model, the bike will allow 40mm of front travel. There is a rigid fork model in between the front sus bikes at $4,799.00 which is also the only bike sporting a front derailleur (!!) All bikes feature wide gearing ranges from SRAM. 

Comments: This bike, I think, is the bike that someone from Kona tipped me off to last year, or was that 2022? Anyway, it was quite some time ago now. The point is, I've been patiently awaiting news of a new drop bar bike model from Kona for quite some time, and now it appears that it is finally here. 

There are certain things I see here that are great: Lower range gearing, big, 2.1" tire clearances, a decently low bottom bracket, and a slack, sub-70 degree head tube angle at a claimed 69.5°. However; by now you should all understand that I am not a fan of "under-traveled", 'gravel' suspension fork designs. Especially spec'ed on a bike aimed at mountain bikers who, for the most part, are not going to think 40mm of travel is enough when their forks are running three times that amount of travel, or more. And then you have the Salsa Cycles' Cutthroat, which actually does support a real MTB fork and has big tire clearances. 

So, in my opinion, this bike is kind of a weird fashion statement, and the real gem is the rigid bike. But maybe that's just me.....

But Wait! There's More! Apparently, according to a "Bicycle Retailer and Industry News" report released on Wednesday, Kona had set up their Sea Otter booth and then tore it back down at the behest of their company overlords, Kent Outdoors. (Kona was sold a couple years ago by the originator's of the brand) Reportedly a group call will have been held on Thursday with the entire Kona staff and then..... Who knows? Maybe the Ouroboros won't be a thing after all.  UPDATED 4/20/24: Scuttlebutt on the social channels, with some claiming insider info, are saying Kona has been shut down by it's owners. This is not verified public info., Late Saturday evening "Bicycle Retailer and Industry News" posted that the company would be put up for sale by its owner, Kent Outdoors. Se the article HERE.

Image courtesy of Munich Composites

More Wheel News:

More introductions concerning wheels happened this week. One of the most interesting to my mind was the acquisition of Munich Composites, a company from Germany, by the Cardinal Group and Boyd Cycling. This new arrangement will bring carbon wheel manufacturing to North Carolina where a state of the art facility will begin producing carbon fiber wheels made with continuous strand technology. 

The patented technique is said to produce a stronger, lighter rim without the use of sheets of pre-preg carbon which then has to be laboriously laid up in a mold. The technique utilized by Munich Composites braids the rim together instead. (See image) The company hopes to have rims produced in the  USA by mid-Summer.

Classified, the internal geared rear hub maker, has just announced that they are now partnering with Enve to offer their proprietary hub, cassette and shifting system in Enve wheel builds. The press release also said that the wheels would also be available on Enve carbon bike model "rolling chassis" options as well. Prices are, as one would expect, on the upper end of what wheels cost these days, but you are getting a partial drive train and shifting system as well. 

Image courtesy of Ritchey Design

Ritchey Design Offers New Butano Ridge Super-Logic Bar/Stem:

Ritchey Design announced a new carbon stem/handle bar with its latest offering, the Butano Ridge Super-Logic 

The design features internal cable routing which can be accessed by a removable cover, a "flattened round" shaped top section, and low weight, of course. The 44cm wide, 110mm length stem version weighs in at 417 grams. 

The Butano Ridge has a 17.5° flare and comes in a matte UD finish. Price in the USA is $599.00. See Ritchey Design for more details on options for sizes of this bar. Keep your eyes peeled for some other Ritchey news in the near future that I think many will be interested in. 

Image courtesy of Salsa Cycles

Salsa Cycles Debuts E-MTB's:

Salsa Cycles continues to roll out their electrified bicycle models and at Sea Otter they are featuring two new MTB eBikes.

The first, here shown to the left, is the Notch, a 160mm travel enduro bike which features a 65 watt/hr Bosch mid-mount motor producing up to 85Nm of torque. 

The other model is the all-mountain Moraine with 145mm of Split-Pivot suspension and a Fazua motor. Each model comes in two spec ranges and each model starts at $4,999.00 and tops out at $5,999.00. See these and other Salsa eBikes HERE. 

Image courtesy of Delium Tires
New Gravel Tire Brand Delium Debuts:

Another gravel tire brand hits the market at Sea Otter and their name is Delium Tires. There are some Delium MTB tires already out there, but these three new models are their first foray into the gravel market. 

To the left here we see the AllRounder, a tire meant for multiple surface types. If you thought it was a Gravel King you could be forgiven, but it isn't a Gravel King. 

The Delium AllRounder comes in 38mm, 43mm, and 50mm widths, all folding bead and tubeless ready with a medium dual compound rubber. 

The next tire up is the Delium SpeedX. This one excels on dry terrain and hard-packed conditions. This model has a triple-compound rubber with a softer, grippier center tread. It comes in a 38mm, 40mm, and 45mm widths. 

SpeedX image courtesy of Delium Tires.

The final tire in the new trio of gravel treads from Delium is the Loamer. This model is all about grip in looser dirt and - the company claims - wet dirt. 

This one has the dual-compound rubber like the AllRounder and also comes in the same sizes as the AllRounder. 

Casings for all three tires have what Delium calls a 'Dual Zone" construction with the side walls being a cut-resistant material and the top of the casing being a more supple construction for lower rolling resistance, grip, and comfort. All three models have 62TPI casings. All three tire models are e-bike certified and cost $49.99 each no matter the model.

Comments: "Tire tread designs are purely fashion". That's what one famous designer of tires told me one time, and well, I think the eye-test for Delium shows that they have hit on some "fashionable" looking tread designs. 

Delium Loamer. Image courtesy of Delium Tire.

That said, it is how a tire feels to ride that matters. If the tire doesn't do anything weird in terms of handling, if it feels good......what's not to like? Looks? Price? I'm going to take a stab here and say that if the Delium tires work out in terms of ride feel, looks, and weight, then the cost makes these pretty desirable. The sizes are right, the tread designs are spot-on, and the only thing missing is where you can get them at. 

About that: Hitting up their site, all three gravel tires are "pre-order" status only, and not all the sizes are available. (No 50's? Boo!) That's not a great start. 

Final Quick Hits: TIME has a revamped gravel pedal line. Looks nothing like the original gravel pedal from them and is essentially a two-sided Xtrac variant that is very expensive. Hope has a new aluminum 24mm internal width wheel with their signature hubs and new valve stems to match. Maxxis is making their Team Issue XC MTB tires available for a limited time. DT Swiss unveiled a ne 90T Ratchet free hub. 

Good luck to all the team at Iowa Wind and Rock this weekend. I hope all the riders are safe and have a great ride.

Whew! That's a wrap on this edition of the FN&V. Have a great weekend and good luck to all the Iowa Wind and Rock riders and volunteers!