Showing posts with label Rivendell. Show all posts
Showing posts with label Rivendell. Show all posts

Friday, April 19, 2024

Friday News And Views

Image courtesy of Rivendell Bikes

 A Corpulent Sea Otter Edition

Seven Speed Specific Hub From Rivendell:

I found this on Instagram recently. A seven speed specific rear hub from Rivedell. Why, in an era of 12 speed rear cassettes, would anyone want a seven speed hub? 

Well, if you asked that, glad you asked, because I can think of several reasons why you'd want this. 

First of all, and less obvious, these hubs have a shorter cassette body, just like the original 7 speed cassette hubs of the 1980's, and that allowed Rivendell to spec a wider hub flange spacing. This allows for a stronger, more reliable wheel, especially for carrying loads. Secondly, seven speed components, like the chain and cassette, have more material than current 11 and 12 speed chains and cassettes which is advantageous from a wear standpoint. Finally, if you get the right sort of cassettes, they can have shifting ramps that stand more proud from the cassette cog enabling better shifting under loads and longer wear as well. 

The Rivendell rear hub is available in silver and a light green anodized hue as shown. The cost is a reasonable $170.00 and they weigh  a claimed 314 grams. I'm not sure if there is a matching green ano front hub, and yes- rim brake only. This is Rivendell, after all. 

Image courtesy of Cane Creek

Cane Creek Debuts Invert Gravel Suspension Fork:

Monday of this week news dropped concerning the new Cane Creek Invert, a gravel suspension fork Cane Creek claims is the "first gravel suspension fork". 

Using a novel combination of a uni-crown style carbon crown and carbon steer tube mated to aluminum uppers and lowers, this fork utilizes an inverted telescopic design, thus the name, "Invert". 

Two models are in the range, one with lock-out, one without. The fork utilizes an air spring, oil bath lubrication, but no damper system as Cane Creek believes that things happen so quickly on gravel with regard to shock absorbing duties that a damper cannot keep up. In fact, their testing showed that a fork in prototype form utilizing a damper was not as satisfactory as one without. 

The travel is limited, as it is with all telescopic "gravel" suspension designs, to either 30mm or 40mm of travel. This forces the axle to crown to be at 425mm for the 30mm travel option, or 435 for the 40mm travel option. So, unless your gravel bike is designed for suspension forks, this will mess with your fit and handling to a degree. Most non-suspension designs for gravel will have an axle to crown of around 400mm, plus or minus a few millimeters.  

Cost is $1,099.00 for the Invert with no lockout, the lightest at 990 grams claimed weight, or $1,199.00 for the lock-out version which weighs a claimed 1,113 grams. 

Comments: Again, this is a telescopic fork, and I will refer you to what I wrote earlier about such forks HERE if you want my full-take on why these types of forks are not ideal for gravel use. I am not saying this, or any other telescopic gravel suspension fork will not work for gravel riders. I am saying this is not the best option for gravel. (See that link for why that is, if you want more on my thoughts) 

I will also point out here that - yes - the Invert has a service interval of every 50 hours for an "oil flush" and every 100 hours for "Full Service". So, keep that in mind when you are thinking about this option. Just to remind you, suspension stems do not have such limitations. Finally, while Cane Creek is to be commended for reducing the weight of this fork to a level that mimics a steel, uni-crown rigid gravel fork, the Lauf Grit weighs a claimed 936 grams right out of the box. Cane Creek is basing their claims on a cut, 165mm steer tube, so it is close to a Lauf but not quite, and the Lauf is maintenance free. 

Carbon Piedmont wheels Image courtesy of e'Thirteen

e'Thirteen Debuts New Piedmont Gravel Wheels:

Known more for their MTB components, e'Thirteen have just announced new Piedmont Gravel wheel sets in alloy and carbon. 

Utilizing straight-pull hubs with a 4 pawl, 3° engagement, the new rims are now 26mm inner rim width on the carbon and 24mm in alloy. The rims use a proprietary Quick Fill valve stem which is provided with the wheels.

The carbon rims have a 31mm profile height, are made from high-modulus carbon fiber with a hookless bead design, and have a lifetime warranty. The carbon rims weigh in at 340 grams each. Wheel set weight is estimated at 1400 grams for the set. 

The alloy rims have a 19.5mm profile height and weigh in at 415 grams each. The alloy rims are also a hookless design. Wheel set weight is estimated at 1500 grams a set. Hubs are identical on each set and the spokes are Sapim D-Lites at 24 count front and rear for both wheel models. The front hub is convertible with the supplied alloy end caps to be either 15mm or 12mm through axle compatible while the rear is a 142mm X 12mm only.

Prices are $1,679.90 for the carbon versions and $749.90 for the alloy versions. 

Image courtesy of Kona Bikes

Kona Ouroboros - Carbon Drop Bar Bike:

Kona announced a new model on Wednesday called the Ouroboros, a front suspended carbon framed "gravel/MTB" bike. 

Using the the Fox TC32 on the entry level $3,799.00 model and the Rock Shox Rudy XPLR Charger Race Day (really?!) fork on the range-topping $6,999.00 model, the bike will allow 40mm of front travel. There is a rigid fork model in between the front sus bikes at $4,799.00 which is also the only bike sporting a front derailleur (!!) All bikes feature wide gearing ranges from SRAM. 

Comments: This bike, I think, is the bike that someone from Kona tipped me off to last year, or was that 2022? Anyway, it was quite some time ago now. The point is, I've been patiently awaiting news of a new drop bar bike model from Kona for quite some time, and now it appears that it is finally here. 

There are certain things I see here that are great: Lower range gearing, big, 2.1" tire clearances, a decently low bottom bracket, and a slack, sub-70 degree head tube angle at a claimed 69.5°. However; by now you should all understand that I am not a fan of "under-traveled", 'gravel' suspension fork designs. Especially spec'ed on a bike aimed at mountain bikers who, for the most part, are not going to think 40mm of travel is enough when their forks are running three times that amount of travel, or more. And then you have the Salsa Cycles' Cutthroat, which actually does support a real MTB fork and has big tire clearances. 

So, in my opinion, this bike is kind of a weird fashion statement, and the real gem is the rigid bike. But maybe that's just me.....

But Wait! There's More! Apparently, according to a "Bicycle Retailer and Industry News" report released on Wednesday, Kona had set up their Sea Otter booth and then tore it back down at the behest of their company overlords, Kent Outdoors. (Kona was sold a couple years ago by the originator's of the brand) Reportedly a group call will have been held on Thursday with the entire Kona staff and then..... Who knows? Maybe the Ouroboros won't be a thing after all.  UPDATED 4/20/24: Scuttlebutt on the social channels, with some claiming insider info, are saying Kona has been shut down by it's owners. This is not verified public info., Late Saturday evening "Bicycle Retailer and Industry News" posted that the company would be put up for sale by its owner, Kent Outdoors. Se the article HERE.

Image courtesy of Munich Composites

More Wheel News:

More introductions concerning wheels happened this week. One of the most interesting to my mind was the acquisition of Munich Composites, a company from Germany, by the Cardinal Group and Boyd Cycling. This new arrangement will bring carbon wheel manufacturing to North Carolina where a state of the art facility will begin producing carbon fiber wheels made with continuous strand technology. 

The patented technique is said to produce a stronger, lighter rim without the use of sheets of pre-preg carbon which then has to be laboriously laid up in a mold. The technique utilized by Munich Composites braids the rim together instead. (See image) The company hopes to have rims produced in the  USA by mid-Summer.

Classified, the internal geared rear hub maker, has just announced that they are now partnering with Enve to offer their proprietary hub, cassette and shifting system in Enve wheel builds. The press release also said that the wheels would also be available on Enve carbon bike model "rolling chassis" options as well. Prices are, as one would expect, on the upper end of what wheels cost these days, but you are getting a partial drive train and shifting system as well. 

Image courtesy of Ritchey Design

Ritchey Design Offers New Butano Ridge Super-Logic Bar/Stem:

Ritchey Design announced a new carbon stem/handle bar with its latest offering, the Butano Ridge Super-Logic 

The design features internal cable routing which can be accessed by a removable cover, a "flattened round" shaped top section, and low weight, of course. The 44cm wide, 110mm length stem version weighs in at 417 grams. 

The Butano Ridge has a 17.5° flare and comes in a matte UD finish. Price in the USA is $599.00. See Ritchey Design for more details on options for sizes of this bar. Keep your eyes peeled for some other Ritchey news in the near future that I think many will be interested in. 

Image courtesy of Salsa Cycles

Salsa Cycles Debuts E-MTB's:

Salsa Cycles continues to roll out their electrified bicycle models and at Sea Otter they are featuring two new MTB eBikes.

The first, here shown to the left, is the Notch, a 160mm travel enduro bike which features a 65 watt/hr Bosch mid-mount motor producing up to 85Nm of torque. 

The other model is the all-mountain Moraine with 145mm of Split-Pivot suspension and a Fazua motor. Each model comes in two spec ranges and each model starts at $4,999.00 and tops out at $5,999.00. See these and other Salsa eBikes HERE. 

Image courtesy of Delium Tires
New Gravel Tire Brand Delium Debuts:

Another gravel tire brand hits the market at Sea Otter and their name is Delium Tires. There are some Delium MTB tires already out there, but these three new models are their first foray into the gravel market. 

To the left here we see the AllRounder, a tire meant for multiple surface types. If you thought it was a Gravel King you could be forgiven, but it isn't a Gravel King. 

The Delium AllRounder comes in 38mm, 43mm, and 50mm widths, all folding bead and tubeless ready with a medium dual compound rubber. 

The next tire up is the Delium SpeedX. This one excels on dry terrain and hard-packed conditions. This model has a triple-compound rubber with a softer, grippier center tread. It comes in a 38mm, 40mm, and 45mm widths. 

SpeedX image courtesy of Delium Tires.

The final tire in the new trio of gravel treads from Delium is the Loamer. This model is all about grip in looser dirt and - the company claims - wet dirt. 

This one has the dual-compound rubber like the AllRounder and also comes in the same sizes as the AllRounder. 

Casings for all three tires have what Delium calls a 'Dual Zone" construction with the side walls being a cut-resistant material and the top of the casing being a more supple construction for lower rolling resistance, grip, and comfort. All three models have 62TPI casings. All three tire models are e-bike certified and cost $49.99 each no matter the model.

Comments: "Tire tread designs are purely fashion". That's what one famous designer of tires told me one time, and well, I think the eye-test for Delium shows that they have hit on some "fashionable" looking tread designs. 

Delium Loamer. Image courtesy of Delium Tire.

That said, it is how a tire feels to ride that matters. If the tire doesn't do anything weird in terms of handling, if it feels good......what's not to like? Looks? Price? I'm going to take a stab here and say that if the Delium tires work out in terms of ride feel, looks, and weight, then the cost makes these pretty desirable. The sizes are right, the tread designs are spot-on, and the only thing missing is where you can get them at. 

About that: Hitting up their site, all three gravel tires are "pre-order" status only, and not all the sizes are available. (No 50's? Boo!) That's not a great start. 

Final Quick Hits: TIME has a revamped gravel pedal line. Looks nothing like the original gravel pedal from them and is essentially a two-sided Xtrac variant that is very expensive. Hope has a new aluminum 24mm internal width wheel with their signature hubs and new valve stems to match. Maxxis is making their Team Issue XC MTB tires available for a limited time. DT Swiss unveiled a ne 90T Ratchet free hub. 

Good luck to all the team at Iowa Wind and Rock this weekend. I hope all the riders are safe and have a great ride.

Whew! That's a wrap on this edition of the FN&V. Have a great weekend and good luck to all the Iowa Wind and Rock riders and volunteers!

Friday, January 05, 2024

Friday News And Views

Image courtesy of Drought.gov
 Drought To Start The Year:

As of December 20th or so, Waterloo Iowa was experiencing its driest December on record. That obviously changed when we got significant rains over Christmas. However; we aren't getting any snow (yet) and if we don't see rain by Spring, well..... 

Obviously that's going to make for a bad set-up for farmers, wildlife, and probably everyone living around here. From a gravel rider's standpoint, it may mean more of conditions like last year, and frankly, the year before that as well. Loose, deep gravel, lots of dust, and none of that classic "three-track" that we all love to ride on here. 

And then again by March we may be dealing with flooding. But not likely as this "El NiƱo" we are in now is said to be a pretty strong one and that usually means warmer than normal and sometimes not very much precipitation. With the base levels of water in the area at very critically low levels, it is going to take quite a wet spell to catch us up. 

Meanwhile I will try to enjoy what I am handed. A milder January may be just what I need to get a jump-start on mileage for 2024. We'll see.....

The new Velo Orange eccentric BB (Image courtesy of Velo Orange

A New Way To Create A Single Speed Device:

Got a traditionally threaded, 68mm/73mm bottom bracket shell on your bicycle? Want to make that bike a single speed? One of your options is from Velo Orange. For about a hundy, you can convert your bike to a single speed with this eccentric bottom bracket which supports any 2-piece, 24mm spindle cranks. 

The bottom bracket comes with a tensioniing tool as well, which is pretty cool. Unfortunately, at the time of this posting, the part is out of stock, but if you subscribe to Velo Orange's newsletter, you'll get notice when it comes back into stock. You can see more on this part HERE. 

Comments: Some folks give eccentrics a bad rap, but I've used a Wheels Manufacturing part similar to this and it works great. Use grease when installing, torque the part to spec, and it shouldn't make a peep. I don't need another single speed, but if I wanted to turn a vertical drop-out bike into a single speed and it had a traditionally threaded bottom bracket? Yeah, I would give this part a go. 

Also, having a drop out like that with an eccentric is, in my opinion, the very best way to have a single speed. Especially with a disc brake set-up. There are zero issues with resetting brakes, lining up the wheel in the frame, or moving swinging bits and locking them back down again. You just pop a QR and boom! Done and done. My OS Bikes Blackbuck MTB is like this and it is a joy to work on.

Alt Derailleur From Rivendell?

If you are a follower of Rivendell, or Grant Petersen, then you may have seen this prototype rear derailleur that Rivendell is working on. Called the OM-1, it is a "rapid-rise" design, meaning that the spring pulls the derailleur into the lowest gear, not the smallest cog/highest gear. Not like 99.9% of derailleurs you've ever seen. 

You can read the minimal amount of info out on this HERE, (Scroll down the page)

Comments: I've worked on a LOT of the old "Rapid Rise" rear derailleurs Shimano produced in the early 2000's. The high-end XT, LX, and such were rare. They didn't last long in the marketplace. But the Nexave, Altus, and CX-30 types were made a little longer, and in much higher production numbers. It was these derailleurs that I saw most often. 

I'll get this out of the way up front: I really don't like Rapid Rise. It was super-finicky to tune and you are working against gravity and friction, a pretty heady combo, when trying to dial in one of those Shimano variants. Additionally, the Nexave and definitely the CX-30 variants were inevitably corroded and and their parallelogram's pivots would have high friction. Sometimes so bad you'd have to replace the derailleur. 

Now, Grant and his team are probably well aware of all of that, but there is a LOT of "uphill battle" here, and I mean that in the best sort of way. I get that people are excited for a very versatile derailleur, but there are literally thousands of great 7,8,and 9 speed derailleurs floating around out there waiting for you. That and Shimano CUES, which is also 8,9,10, and 11 speed compatible all in one derailleur. (Don't "at me" with your pull ratio excuse. Use friction shifters!) 

So, with all of that, I wish Rivendell well in their tilting at windmills. I have a hard time seeing the point in this exercise, but maybe this trips your trigger? Good on ya.

Shimano Re-ups Rebound Virtual Gravel Challenge:

Last year, Shimano announced a virtual gravel event called "Rebound" which asked riders from all over the world to join in and ride gravel on June 3rd, 2023. The ask was simple and rides would be compiled on Strava. Here was the basic premise:

"In the spirit of Unbound, we encourage you to pick one of the following distances: 25 miles (40 km), 50 miles (80 km), 100 miles (160 km) or 200 miles (320 km). "

Well, Shimano wants to see if this can become even larger than last year and they are promoting the idea again for 2024. (See the site HERE) This year the ride is happening on June 1st.

Comments: You can read what I said about the idea last year HERE.  This year I feel the same, and I would join in on this but for the fact that I'll probably be in Emporia, or just back from there, that day. Otherwise, I'd love to participate in this. (Again, read my comments from last year as to why that is)

I guess my only other thought on this is a question: "Does this event happen without what we went through with the pandemic?" Virtual events were nearly unheard of previously to that, and certainly the whole idea of the "getting together of the gravel family" aspect did not lean toward a virtual event format. 

But I think Rebound exists because we had to do virtual events in 2020 and 2021 to some extent. We are more open to that concept, and it feeds the American mindset of independence and self-sufficiency which, I cannot say exists in the rest of the world, but for sure it does here. That is neither an indictment or supportive of self-support, independent riding, or virtual events, its just my observation. I just cannot help but think that without 2020-2021, rebound doesn't happen. 

Season 2 Has Started!

The Guitar Ted Podcast (GTP) has kicked off its second season already with a new episode sponsored by CORE4.

This time N.Y. Roll and I speak to the group etiquette and tactics which seem to be somewhat of a missing link in gravel circles and on some road group rides. 

I think we are pretty clear in saying we are not "The Experts". but we wanted to kick off a conversation regarding group ride technique so that information gets disseminated that may help someone avoid serious injury or death. We feel riding skills are important, and that some folks don't know, or haven't practiced those time-honored skills that make group riding safer and less stressful. 

You can find the podcast at THIS LINK or wherever you get your podcast feed from. Thanks to CORE4 for the sponsorship! 

That's a wrap for the first FN&V of 2024! Have a great weekend and thanks for reading G-Ted Productions!