Ridley's new e-Aster gravel bike. (Image courtesy of Ridley Bikes)
Of course, bicycles with electric motors in them are big business. However; some circles of cycling are not as hot with the trend as others. On one hand, you can hardly turn around and not hit a cargo bike with an electric motor in it. Ditto for many long-travel mountain bikes.
Now look at road cycling. Hmm.... Not a lot of movement in the e-Road bike market. There are some, sure, but you just do not see a lot of chatter about those bicycles. Same thing in the gravel cycling scene, at least for now. This may be changing soon.
My friend, Ari Andonopoulos, calls road bikes "cheater bikes". I would guess this is because riding on gravel, which Ari loves to do, is met with more resistance and takes more effort than riding smooth(er) paved roads. I say this because I find it to be true as well. Gravel is not 'easy', and besides the technical skills needed to navigate loose crushed rock roads, the effort you must put in might be a bit daunting to some who know what road cycling is like.
Ribble Allgrit e-Gravel (Image courtesy of Ribble Bikes)
So, will something with assist for gravel riding be acceptable by those who want to ride gravel roads? I'm going to go out on a limb and say "no", if you are a traditionalist, long-time gravel rider. However; I would not be at all surprised to see some of these more "bicycle-shaped" gravel bikes with electric motors start to find appeal with many more riders, both aging and young.
Early gravel bicycles with electric motors looked....goofy. They did not appear to be the bicycle I'd want to be seen on. Vanity? Yes....I'll admit it. But how my bicycle looks matters, and something with a swollen, misshapen down tube and a "belly" where a motor resides is not my cup of tea. I don't care how good the motor and battery are.
I will say the elegant Ridley e-Aster and the Ribble Allgrit e-AL models of e-gravel bikes are appealing. They are easy on the eye, and you get a modicum of assistance but not a motorcycle level of power. Is a bicycle like this "the best of both worlds"? It could be for some, I think.
On the other hand, these bicycles could pose issues for race directors who, understandably, could miss detecting these bikes and have contestants in non-ebike categories taking advantage of the stealth nature of these bikes. Now....I have no horse in this race, and I don't really care, but some folks will cry foul. I can see how this might become an issue. But besides this, I would think these bicycles might have a chance at becoming something we see a lot more of out on the gravel.
With more "normal" looking e-gravel bikes and, hopefully, lower price points, we might see the next mini-boom in cycling come from e-gravel bikes. Time will tell...
Last Monday news hit the web-o-sphere that Maxxis was debuting a new tire called the "Receptor". I took a look and said to myself, "Byway v2". It's no wonder that Maxxis, who haven't been a big player in terms of recognition in the gravel scene, wanted to pull a model out with a striking resemblance to one of WTB's best selling gravel tires, the Byway.
I know at one point a few years ago, the Byway was the number one seller for WTB. So, with Maxxis not garnering a lot of buzz in the gravel scene, it makes sense, on one hand, to pretty much copy the Byway. Hopefully Maxxis gives this Byway-like tire a bit more volume than WTB gave the Byway, a tire that they are calling a 40mm tire. The Byway is pretty much a 38mm tire in 700c form, so it is a bit of a bummer if you are in the 40mm-43mm camp for a tire on your gravel bike.
Of course, there is a 650B variant, a tire listed at 47mm, again, very Byway-like. The 650B one also is currently the only variant listed on the Maxxis website, although news regurgitations of the press release claim there will also be a 700c X 40mm black and skin wall version available at some point. (To be fair, the 700c sizes and skin wall options are mentioned in the video on the Receptor page.)
Comments: Smooth center + knobby edges = Gravel Tire® Seems to be the common tread design with variations on the theme ever since Challenge Tire's aptly named 'Gravel Grinder' tire came out about eight years ago now. The knobs on this Receptor tire look almost like an after-thought though. They come so far down the shoulders of the tire that, on a narrower 40mm carcass, you'd have to be in a pretty steep lean or in a really soft, loose terrain condition to even engage those tread features. This is what I would deem as a "Mental Insurance" tread feature. It makes you feel like you've got something other than a slick tire when in fact all you have is a slick tire with some ornamental tread blocks. To Maxxis' credit, these 'knobs' look pretty minimal, so they shouldn't add a lot of weight.
Maxxis gravel tires used to be a real treat to mount tubeless due to their carbon fiber strand bead. Maxxis makes no mention of this feature on their site, so if they are not doing that anymore, all the better. I'm keenly interested in the 700 X 40mm size, because if it is really 40mm, then it would leap into my favorites category, assuming all else was up to snuff. With Maxxis, there really is no reason to believe it wouldn't be.
A Tweet from Panaracer's social media 2/15/21
Panaracer Drops Sponsorship of Gravel Racing Team:
One of the first industry sponsored gravel racing teams had its former title sponsor drop out for 2021. The new Abus Pro Gravel racing team was announced February 10th with no mention of Panaracer's involvement anymore.
Panaracer, on the other hand, started putting out feelers for brand ambassadors on February 1st. Panaracer posted on their Facebook page the following:"As
a Panaracer ambassador, we will support you in your riding adventures
in return for your original content, stoke and feedback." Applications for brand ambassadorship closed on February 14th.
Comments: Obviously Panaracer is taking a much different approach to sponsorship going forward. You may have heard about"direct to consumer" type retail, well this might be seen as 'direct to consumer marketing' since the company seems to be cutting out any 'traditional' types of athlete activation. Obviously, getting content and tester feedback for a few sets of tires and "social media fame" will be a good trade off from what is spent on traditional marketing. Remember the old saw: "I owe my soul to the Company Store"? Kinda smells like that to me. Also noteworthy of thought: I don't know what types of events Panaracer will be involved in going forward, but it wouldn't surprise me to see that Panaracer becomes a grassroots events sponsor, if they do anything at all.
Also, as seen in the Tweet shown, Panaracer will have a 'new, modernized look', whatever that means. (Actually, we get to find out Monday- I got an embargoed press release) and it will be interesting to see how their marketing changes going forward.
The new Pivot Cycles E-Vault. (Image courtesy of Pivot Cycles)
Pivot Cycles Introduces New E-Vault Gravel Bike:
Tuesday news broke that Pivot Cycles has introduced a HPC (motorized bicycle) that is meant for city and gravel usage. It's dubbed the E-Vault.
This Hybrid Powered Cycle (HPC) features a Fazua motor which has three levels of assist, adjustable on the fly. The motor also features a complete decoupling mode for 100% human powered cycling with no drag from the motor's internals. (Of course, you still have to overcome the extra weight) The frame is carbon fiber and it features top-shelf components from Shimano and others. Pivot lists the starting price at $9,999.00USD.
Comments: There were a few items I was curious about concerning this bike. How far could you go on a charge? What sort of weight are you pedaling around in decoupled mode? What's the geometry like? Well, besides the geometry, which you have to scroll down the page for, the other two question's answers were buried in the FAQ.
The geometry is okay. It is what I am starting to feel like is "Gravel Bike 1.0 Geometry". 72° head angle, 70mm bottom bracket drop. Pretty 'five years ago' geometry there, and as far as I am concerned, a geometry that wasn't right from the get-go. But that said, it's okay. It works alright but there is a better way to go.
Now the weight- almost 30lbs. Not bad for a HPC, but hold on here. This is important. In the FAQ Pivot claims they could get about 45-50 miles in a single charge with less than 4,000ft of climbing. They do not give an indication of what percentage of that was boosted riding versus non-assisted, but I'll give them the benefit of the doubt and say it was 100% boosted for that amount of mileage/climbing. That's not very impressive. Not when you consider how easily one can accumulate 4,000 feet of climb in a state like Iowa on a 50 mile ride. Oh.....and wind is a factor too. That isn't accounted for in this measure for all we know here.
And the bike is ten grand minimum. Ouch! HPC's are going to get people out of their cars and riding more? Not in this case, I don't think that is the idea.
That's a wrap for this frigid week! Let's hope warmer weather is on the way!
Last Monday news hit the web-o-sphere that Maxxis was debuting a new tire called the "Receptor". I took a look and said to myself, "Byway v2". It's no wonder that Maxxis, who haven't been a big player in terms of recognition in the gravel scene, wanted to pull a model out with a striking resemblance to one of WTB's best selling gravel tires, the Byway.
I know at one point a few years ago, the Byway was the number one seller for WTB. So, with Maxxis not garnering a lot of buzz in the gravel scene, it makes sense, on one hand, to pretty much copy the Byway. Hopefully Maxxis gives this Byway-like tire a bit more volume than WTB gave the Byway, a tire that they are calling a 40mm tire. The Byway is pretty much a 38mm tire in 700c form, so it is a bit of a bummer if you are in the 40mm-43mm camp for a tire on your gravel bike.
Of course, there is a 650B variant, a tire listed at 47mm, again, very Byway-like. The 650B one also is currently the only variant listed on the Maxxis website, although news regurgitations of the press release claim there will also be a 700c X 40mm black and skin wall version available at some point. (To be fair, the 700c sizes and skin wall options are mentioned in the video on the Receptor page.)
Comments: Smooth center + knobby edges = Gravel Tire® Seems to be the common tread design with variations on the theme ever since Challenge Tire's aptly named 'Gravel Grinder' tire came out about eight years ago now. The knobs on this Receptor tire look almost like an after-thought though. They come so far down the shoulders of the tire that, on a narrower 40mm carcass, you'd have to be in a pretty steep lean or in a really soft, loose terrain condition to even engage those tread features. This is what I would deem as a "Mental Insurance" tread feature. It makes you feel like you've got something other than a slick tire when in fact all you have is a slick tire with some ornamental tread blocks. To Maxxis' credit, these 'knobs' look pretty minimal, so they shouldn't add a lot of weight.
Maxxis gravel tires used to be a real treat to mount tubeless due to their carbon fiber strand bead. Maxxis makes no mention of this feature on their site, so if they are not doing that anymore, all the better. I'm keenly interested in the 700 X 40mm size, because if it is really 40mm, then it would leap into my favorites category, assuming all else was up to snuff. With Maxxis, there really is no reason to believe it wouldn't be.
A Tweet from Panaracer's social media 2/15/21
Panaracer Drops Sponsorship of Gravel Racing Team:
One of the first industry sponsored gravel racing teams had its former title sponsor drop out for 2021. The new Abus Pro Gravel racing team was announced February 10th with no mention of Panaracer's involvement anymore.
Panaracer, on the other hand, started putting out feelers for brand ambassadors on February 1st. Panaracer posted on their Facebook page the following:"As
a Panaracer ambassador, we will support you in your riding adventures
in return for your original content, stoke and feedback." Applications for brand ambassadorship closed on February 14th.
Comments: Obviously Panaracer is taking a much different approach to sponsorship going forward. You may have heard about"direct to consumer" type retail, well this might be seen as 'direct to consumer marketing' since the company seems to be cutting out any 'traditional' types of athlete activation. Obviously, getting content and tester feedback for a few sets of tires and "social media fame" will be a good trade off from what is spent on traditional marketing. Remember the old saw: "I owe my soul to the Company Store"? Kinda smells like that to me. Also noteworthy of thought: I don't know what types of events Panaracer will be involved in going forward, but it wouldn't surprise me to see that Panaracer becomes a grassroots events sponsor, if they do anything at all.
Also, as seen in the Tweet shown, Panaracer will have a 'new, modernized look', whatever that means. (Actually, we get to find out Monday- I got an embargoed press release) and it will be interesting to see how their marketing changes going forward.
The new Pivot Cycles E-Vault. (Image courtesy of Pivot Cycles)
Pivot Cycles Introduces New E-Vault Gravel Bike:
Tuesday news broke that Pivot Cycles has introduced a HPC (motorized bicycle) that is meant for city and gravel usage. It's dubbed the E-Vault.
This Hybrid Powered Cycle (HPC) features a Fazua motor which has three levels of assist, adjustable on the fly. The motor also features a complete decoupling mode for 100% human powered cycling with no drag from the motor's internals. (Of course, you still have to overcome the extra weight) The frame is carbon fiber and it features top-shelf components from Shimano and others. Pivot lists the starting price at $9,999.00USD.
Comments: There were a few items I was curious about concerning this bike. How far could you go on a charge? What sort of weight are you pedaling around in decoupled mode? What's the geometry like? Well, besides the geometry, which you have to scroll down the page for, the other two question's answers were buried in the FAQ.
The geometry is okay. It is what I am starting to feel like is "Gravel Bike 1.0 Geometry". 72° head angle, 70mm bottom bracket drop. Pretty 'five years ago' geometry there, and as far as I am concerned, a geometry that wasn't right from the get-go. But that said, it's okay. It works alright but there is a better way to go.
Now the weight- almost 30lbs. Not bad for a HPC, but hold on here. This is important. In the FAQ Pivot claims they could get about 45-50 miles in a single charge with less than 4,000ft of climbing. They do not give an indication of what percentage of that was boosted riding versus non-assisted, but I'll give them the benefit of the doubt and say it was 100% boosted for that amount of mileage/climbing. That's not very impressive. Not when you consider how easily one can accumulate 4,000 feet of climb in a state like Iowa on a 50 mile ride. Oh.....and wind is a factor too. That isn't accounted for in this measure for all we know here.
And the bike is ten grand minimum. Ouch! HPC's are going to get people out of their cars and riding more? Not in this case, I don't think that is the idea.
That's a wrap for this frigid week! Let's hope warmer weather is on the way!
The other day I received a message from my friend Ari who found the following video and posted it on his blog. It is a film concept featuring a rider in need of a "gravel fix" (Played by Nicholas McColloch) and then morphs into a music video and GoPro footage from the event itself. I've posted the YouTube link below here.
It's a little rough in the beginning, but the event footage is telling. You get some pre-dawn riding from Grinnell, a scene of the group rolling into Hartwick which was CP#1, then some convenince store shots of Casey's in Brooklyn, Iowa and North English, Iowa. Then there is the brief appearance of a barn with a barn quilt, which is the remnants of Hinkletown, Iowa. After this you get a couple views of the chunky gravel in Johnson County, the torn up road North of Kalona, and then the fade into night. Nicholas stopped at CP#2, so there was no footage past the fall of night.
All the while, Nicholas and his merry pranksters, including Charles Parsons and Trenton Raygor, take shots of whiskey along the way. Enjoy this unique look at a Trans Iowa!
Shimano Shows Heavy Investment Into Gravel Cycling:
Screen shot from Shimano's
I was cruising the "innergoogles" the other day and came across the new Shimano webpage all about gravel cycling. Check it out HERE.
A bit of background is in order here. First off, Shimano is a company that doesn't just "jump into stuff". They study things, do research, and test theories before announcing anything publicly. This is why a lot of people mistakenly thought Shimano was sleeping when SRAM introduced 1X. They were not sleeping, they were doing their homework. So, the "sudden appearance" of a gravel website should tell you that Shimano has been working on gravel specific components and accessories for years. In fact, if you dig into the site, you will find out that this has been in development for two years already.
Secondly, Shimano sent over a contingent of employees from Japan to ride in the recently completed Almanzo 100. I actually saw a few of them come through Cherry Grove. Shimano also had a few of its new "Gravel Alliance" riders in the event who were supported by a Shimano course support van. (boo! Almanzo was supposedly a self-supported event at one time.) "So what?!", you say? Well, in reality, Shimano doesn't generally do this. That's why this effort to come to Almanzo was a very big deal.
You can bet that Shimano studied the riders, their gear, the needs of riders, and took in a ton of information which is going to get dissected in Japan and end up being stuff you and I can buy. They already are well on their way in terms of developing things if we are getting a "public display" (website presence, rider advocates) of their "gravel focus". Yes folks, this will be a big deal. It will also drive OEM product in the future as well. In fact, this nay be a result of OEM inquiries. Either way, gravel isn't going away, and if you thought there was a lot of product now, just wait.........
Raleigh's Tamland iE Step Over
Electric Gravel Boogaloo:
While it isn't the first e-gravel bike I've heard of, it may be the most refined version of one. Yep......electric gravel mopeds. It's coming to a race near you, unless some wily promoters don't allow it.
Check it out on Raleigh's site HERE , but if you want the particulars, here they are. Pony up 4700 bucks and get assisted stroke that will take you to a breath taking 28mph maximum and go as far as 50-80 miles on a single charge.
Not specified- Weight. What happens when you are 20 miles out and the battery goes kaput? Maybe the gravel was fresh, causing higher resistance, or maybe you had a 20mph head wind. Well, your ride will really suck now, pedaling that heavy beast to town. Also curious: Do high profile events now have to provide charging stations at checkpoints, or do we get neutral battery support?
Seriously- I really don't care if you want an e-bike anything. But make no mistake- you are not experiencing cycling like I and many others do. Whether that is "good", "bad", or whatever is still up for debate. But what isn't up for debate is that e-cycling isn't the same as riding a human powered vehicle with two wheels. So, my take on this Raleigh is that it isn't in the spirit of cycling, or gravel cycling in particular, where self-reliance on one's wits and athleticism is one of the tenets that I hold dear. Your mileage may vary.
MCD frame clearance with a Nano 2.1 mounted to an i23mm rim. Image courtesy of Mike Varley
Getting Excited:
There is going to be a "new bike day" for me this year as I am acquiring a Black Mountain Cycles "Monster Cross Disc", or MCD, for short. It is a design similar to my "Orange Crush" rig, but with a bit different cut to its jib. The frame will have disc brakes instead of rim brakes, of course, and it has a much more severely sloping top tube/shorter seat tube than the original Monster Cross.
The frames are apparently quite popular. Check out the latest from Black Mountain Cycles here. I am in for a pink one, and I am pretty excited about it too. Of course, when this frame and fork comes in, there are going to be a lot of changes in the Guitar Ted stable. Here's what I envision happening here:
The Twin Six Standard Rando is up for sale already. I will be transitioning the original build back onto this bike soon, but if you are interested it is on my Garage Sale Page already at a bargain price.
I'm likely going to retire the Tamland. It looks as though gravel cycling is going all in on through axles and I need to swap the wheel fleet over to that direction. The frame is getting pretty beat up, so after 4 years of abuses it is time to hang it up on the wall. It is never going to get sold, as this represents a design I had an influence on, so I think I'd better keep it around. The "official" retirement ride will happen later this year.
The Orange Crush will get made into a single speed. I set this bike up that way at the very first and I loved having a single speed gravel rig. The rim brake fleet of wheels will get SS'ed and be exclusively used on this bike with the possibility of one wheel set getting sold or used on a completely different bike.
There may be a wheel set for sale or two.
Hey! It's Memorial Day Weekend! Stay safe and get out and ride those bicycles!
The other day I received a message from my friend Ari who found the following video and posted it on his blog. It is a film concept featuring a rider in need of a "gravel fix" (Played by Nicholas McColloch) and then morphs into a music video and GoPro footage from the event itself. I've posted the YouTube link below here.
It's a little rough in the beginning, but the event footage is telling. You get some pre-dawn riding from Grinnell, a scene of the group rolling into Hartwick which was CP#1, then some convenince store shots of Casey's in Brooklyn, Iowa and North English, Iowa. Then there is the brief appearance of a barn with a barn quilt, which is the remnants of Hinkletown, Iowa. After this you get a couple views of the chunky gravel in Johnson County, the torn up road North of Kalona, and then the fade into night. Nicholas stopped at CP#2, so there was no footage past the fall of night.
All the while, Nicholas and his merry pranksters, including Charles Parsons and Trenton Raygor, take shots of whiskey along the way. Enjoy this unique look at a Trans Iowa!
Shimano Shows Heavy Investment Into Gravel Cycling:
Screen shot from Shimano's
I was cruising the "innergoogles" the other day and came across the new Shimano webpage all about gravel cycling. Check it out HERE.
A bit of background is in order here. First off, Shimano is a company that doesn't just "jump into stuff". They study things, do research, and test theories before announcing anything publicly. This is why a lot of people mistakenly thought Shimano was sleeping when SRAM introduced 1X. They were not sleeping, they were doing their homework. So, the "sudden appearance" of a gravel website should tell you that Shimano has been working on gravel specific components and accessories for years. In fact, if you dig into the site, you will find out that this has been in development for two years already.
Secondly, Shimano sent over a contingent of employees from Japan to ride in the recently completed Almanzo 100. I actually saw a few of them come through Cherry Grove. Shimano also had a few of its new "Gravel Alliance" riders in the event who were supported by a Shimano course support van. (boo! Almanzo was supposedly a self-supported event at one time.) "So what?!", you say? Well, in reality, Shimano doesn't generally do this. That's why this effort to come to Almanzo was a very big deal.
You can bet that Shimano studied the riders, their gear, the needs of riders, and took in a ton of information which is going to get dissected in Japan and end up being stuff you and I can buy. They already are well on their way in terms of developing things if we are getting a "public display" (website presence, rider advocates) of their "gravel focus". Yes folks, this will be a big deal. It will also drive OEM product in the future as well. In fact, this nay be a result of OEM inquiries. Either way, gravel isn't going away, and if you thought there was a lot of product now, just wait.........
Raleigh's Tamland iE Step Over
Electric Gravel Boogaloo:
While it isn't the first e-gravel bike I've heard of, it may be the most refined version of one. Yep......electric gravel mopeds. It's coming to a race near you, unless some wily promoters don't allow it.
Check it out on Raleigh's site HERE , but if you want the particulars, here they are. Pony up 4700 bucks and get assisted stroke that will take you to a breath taking 28mph maximum and go as far as 50-80 miles on a single charge.
Not specified- Weight. What happens when you are 20 miles out and the battery goes kaput? Maybe the gravel was fresh, causing higher resistance, or maybe you had a 20mph head wind. Well, your ride will really suck now, pedaling that heavy beast to town. Also curious: Do high profile events now have to provide charging stations at checkpoints, or do we get neutral battery support?
Seriously- I really don't care if you want an e-bike anything. But make no mistake- you are not experiencing cycling like I and many others do. Whether that is "good", "bad", or whatever is still up for debate. But what isn't up for debate is that e-cycling isn't the same as riding a human powered vehicle with two wheels. So, my take on this Raleigh is that it isn't in the spirit of cycling, or gravel cycling in particular, where self-reliance on one's wits and athleticism is one of the tenets that I hold dear. Your mileage may vary.
MCD frame clearance with a Nano 2.1 mounted to an i23mm rim. Image courtesy of Mike Varley
Getting Excited:
There is going to be a "new bike day" for me this year as I am acquiring a Black Mountain Cycles "Monster Cross Disc", or MCD, for short. It is a design similar to my "Orange Crush" rig, but with a bit different cut to its jib. The frame will have disc brakes instead of rim brakes, of course, and it has a much more severely sloping top tube/shorter seat tube than the original Monster Cross.
The frames are apparently quite popular. Check out the latest from Black Mountain Cycles here. I am in for a pink one, and I am pretty excited about it too. Of course, when this frame and fork comes in, there are going to be a lot of changes in the Guitar Ted stable. Here's what I envision happening here:
The Twin Six Standard Rando is up for sale already. I will be transitioning the original build back onto this bike soon, but if you are interested it is on my Garage Sale Page already at a bargain price.
I'm likely going to retire the Tamland. It looks as though gravel cycling is going all in on through axles and I need to swap the wheel fleet over to that direction. The frame is getting pretty beat up, so after 4 years of abuses it is time to hang it up on the wall. It is never going to get sold, as this represents a design I had an influence on, so I think I'd better keep it around. The "official" retirement ride will happen later this year.
The Orange Crush will get made into a single speed. I set this bike up that way at the very first and I loved having a single speed gravel rig. The rim brake fleet of wheels will get SS'ed and be exclusively used on this bike with the possibility of one wheel set getting sold or used on a completely different bike.
There may be a wheel set for sale or two.
Hey! It's Memorial Day Weekend! Stay safe and get out and ride those bicycles!
