Wednesday, August 16, 2023

Randomonium

 NOTE: Okay folks, if you haven't been around long enough here to know what a "Randomonium" post is, then here is the deal. I ramble on about all things cycling (usually, but not necessarily) in one, incohesive, bizarre post. "Randomonium", okay?

Volunteer Day:

The second round of volunteers went through the Cedar Valley Bicycle Collective on Tuesday. I hosted five fellows from the engineering groups at the Collective for four hours. 

The mission was to tear down bicycles which were not viable candidates for refurbishing and sale to collect any parts we might be able to use on rebuilds and for people looking for used parts cheap. I also had the gentlemen tearing apart wheels for bearings and bearing "cones".  We routinely use old bearing cones up for rebuilding wheels with pitted out cone races. 

Even the bearings themselves get re-used and so we keep those and sort through them later. Hopefully the nearly three dozen wheels we went through Tuesday will garner some good, usable parts, but I have to sort through all of that yet.   

Meanwhile these engineers got to use their hands on tools, (they are not allowed to due to Union rules at work), and they learned a bit about bicycle repair in the process of tearing things apart. I guess I did alright in leading them because none of them took the opportunity to complain when given the chance! They even said that they had fun!

Calling Up Old Skills:

Well, I had to dig deep, but I recalled some old repair skills I learned over twenty years ago. My car interior repair skills!

The "Truck With No Name", (2003 Toyota Tundra) had a broken inner door handle. So I got one of those off Amazon, (!!!) and watched a You Tube video, (cheating?), and then I got the door handle swapped out in about an hour. 

The worst part? Getting the circlip off the window crank with a special flattened steel tool blindly, while trying not to tear up or mar the soft, "faux leather" material that the door panel is upholstered in. Actually, that part took longer than everything else combined. 

For those familiar with this, I need not tell you more. If you are only familiar with biccyles, this is akin to internally routed cables. I know bicycle mechanics like to moan on about the difficulties of doing internally routed cables, internally routed handle bars, and pushing brake hoses around bottom brackets, but you have no idea how bad it can get. Doing car work reminded me instantly of this fact. 

Working on these crazy electrified bicycles is a close second. Yeah..... Bike mechanics have it easy in comparison. Much easier.

Source: People For Bikes. Chart seen in a "Bicycle Retailer and Industry News" article.
Big Inventory - Little Sales:

By this time of the year it was hoped that the seasonal higher sales of Summer would eat into the over-stuffed warehouses of suppliers and bicycle brands, but according to an article just published in "Bicycle Reetailer and Industry News" by Rick Vosper, this is not the case at all. 

Recent lay-offs in the industry and bankruptcy filings by various brands have indicated that the industry is in for more turmoil going into 2024. Without a surge in sales volumes, you can plainly see by the chart shown above that something has to give, and it likely won't be pretty when it does. 

What does it all mean for the average cyclist? Well, if you have the money, now and for the foreseeable future, prices will be discounted to crazy levels on many bicycles and cycling gear. But even if that sells some stuff, at the levels which are being reported now, it doesn't seem that it will be enough to even have "decent sales" volumes. 

That's because inventory levels are at a place no one has seen in their lifetimes. Record breaking levels. Crazy levels. That means that we will likely see some bad news about some companies in the future. Which companies and to what extent is anyone's guess at this point. But I think we will all be surprised at some points.

Randomonium

 NOTE: Okay folks, if you haven't been around long enough here to know what a "Randomonium" post is, then here is the deal. I ramble on about all things cycling (usually, but not necessarily) in one, incohesive, bizarre post. "Randomonium", okay?

Volunteer Day:

The second round of volunteers went through the Cedar Valley Bicycle Collective on Tuesday. I hosted five fellows from the engineering groups at the Collective for four hours. 

The mission was to tear down bicycles which were not viable candidates for refurbishing and sale to collect any parts we might be able to use on rebuilds and for people looking for used parts cheap. I also had the gentlemen tearing apart wheels for bearings and bearing "cones".  We routinely use old bearing cones up for rebuilding wheels with pitted out cone races. 

Even the bearings themselves get re-used and so we keep those and sort through them later. Hopefully the nearly three dozen wheels we went through Tuesday will garner some good, usable parts, but I have to sort through all of that yet.   

Meanwhile these engineers got to use their hands on tools, (they are not allowed to due to Union rules at work), and they learned a bit about bicycle repair in the process of tearing things apart. I guess I did alright in leading them because none of them took the opportunity to complain when given the chance! They even said that they had fun!

Calling Up Old Skills:

Well, I had to dig deep, but I recalled some old repair skills I learned over twenty years ago. My car interior repair skills!

The "Truck With No Name", (2003 Toyota Tundra) had a broken inner door handle. So I got one of those off Amazon, (!!!) and watched a You Tube video, (cheating?), and then I got the door handle swapped out in about an hour. 

The worst part? Getting the circlip off the window crank with a special flattened steel tool blindly, while trying not to tear up or mar the soft, "faux leather" material that the door panel is upholstered in. Actually, that part took longer than everything else combined. 

For those familiar with this, I need not tell you more. If you are only familiar with biccyles, this is akin to internally routed cables. I know bicycle mechanics like to moan on about the difficulties of doing internally routed cables, internally routed handle bars, and pushing brake hoses around bottom brackets, but you have no idea how bad it can get. Doing car work reminded me instantly of this fact. 

Working on these crazy electrified bicycles is a close second. Yeah..... Bike mechanics have it easy in comparison. Much easier.

Source: People For Bikes. Chart seen in a "Bicycle Retailer and Industry News" article.
Big Inventory - Little Sales:

By this time of the year it was hoped that the seasonal higher sales of Summer would eat into the over-stuffed warehouses of suppliers and bicycle brands, but according to an article just published in "Bicycle Reetailer and Industry News" by Rick Vosper, this is not the case at all. 

Recent lay-offs in the industry and bankruptcy filings by various brands have indicated that the industry is in for more turmoil going into 2024. Without a surge in sales volumes, you can plainly see by the chart shown above that something has to give, and it likely won't be pretty when it does. 

What does it all mean for the average cyclist? Well, if you have the money, now and for the foreseeable future, prices will be discounted to crazy levels on many bicycles and cycling gear. But even if that sells some stuff, at the levels which are being reported now, it doesn't seem that it will be enough to even have "decent sales" volumes. 

That's because inventory levels are at a place no one has seen in their lifetimes. Record breaking levels. Crazy levels. That means that we will likely see some bad news about some companies in the future. Which companies and to what extent is anyone's guess at this point. But I think we will all be surprised at some points.

Tuesday, August 15, 2023

Review: State Bicycle Co. Cargo Cage, All-Road Disc Calipers

Note: I received the products mentioned in this review at no charge to me. State Bicycle Co. did not bribe me, nor are they paying me for this review. I always strive to give my honest thoughts and opinions throughout. 

Hey, when you are a reviewer of products, you often times are subject to the whims and foibles of marketing folk. You hardly ever get to work with the same person for long, as the door seems to be a revolving one at those firms, and so it becomes a situation where the goal posts get moved all the time in terms of how, or even if, I will get stuff in to test/review. 

A great example of this would be the current products featured in today's post. The same firm I am dealing with here asked me if I wanted to review some shoes and I said "yes", but it has been a month now, and..... This stuff here, the State Bicycle Co. stuff, I said yes to just last Wednesday and it arrived at my door on Saturday. 

You just never know!

Readers here may have seen my mention of the State Bicycle Co. stuff on Friday in the "FN&V". If you caught that, you know that I was most interested in the brake calipers and the cargo cage. So, State sent that to me and well, here's the lowdown on the products....

(L-R) Silicone molded Cargo Straps, Cargo Cage, All-Road Disc Calipers.

Let's take these one at a time...

State Cargo Cage & Silicone Molded Straps: The Cargo Cage is designed to reflect the desert home of State Bicycle Co. with its cactus and mountains motif. The "SBC" logo is also there to remind you where the cage came from. The cage is crafted from 5250 aluminum alloy and features a clever slotted and ovalized hole mounting pattern allowing the rider to utilize several mounting options. This cage has a claimed weight of 168 grams and is rated to 25lbs capacity for cargo weight. The Cargo Cage sells for $24.95 and is available direct from State Bicycle Co's website here. 

The Silicone Molded Cargo Straps are an optional accessory item which can be used with the Cargo Cage or with other bags and cages. The straps measure 22mm X 56cm and have a nice buckle and strap retention loop. You can add these at purchase of the Cargo Cage or State sells these separately for $9.99.

All-Road Disc Brake Calipers: The All-Road Disc Brake Calipers can be purchased separately or as a set. These calipers are hybrid type calipers which are actuated by a cable but are hydraulic at the caliper only. 

There is not a ton of technical information on State's site about these, but the instructions in the box give us more clues and information. The calipers are actuated by an arm that displaces mineral oil inside the sealed caliper. This forces both pistons outward to cause braking action using Shimano compatible pads. (Easy replacement!) The manual says that these should never need bleeding, so they should be low maintenance. 

The manual also lets us know that these brake calipers were produced by the Chinese firm IIIPro. Checking into this online I was able to ferret out that the calipers are CNC machined, (they look like they are as well) and that the anodizing is scratch resistant. 

The calipers come with hardware to adapt the calipers to 140mm or 160mm rotors, which should accommodate most gravel bikes. The price from State for a pair of these is $99.99. You can check out the State Bicycle Co. site for more on these here. 

First Impressions: 

The products were well presented and they looked like premium components which should work well. I especially liked that the mounting options for the cage would allow for different use scenarios. The disc brake calipers were handsome and the CNC machining marks always look cool to me. The anodization of the aluminum parts looked great and I saw nothing odd or out of place there. 

The Cargo Straps were a new thing on me. I see a lot of bikepackers using similar ones to these and now I can see why. They are about 100 times easier to use over the traditional Nylon strap and plastic buckle deals I had been using. Not to mention that these are a vast upgrade over toe-straps! 

The installation of the flat mount calipers was pretty straight forward with the exception of one thing. The front caliper adapter came set in the 140mm position. What?! Okay, so I have to switch that around. I don't know of many 140mm front applications, so I thought this was odd. Things got a bit more complicated when I found that IIIPro used a pretty aggressive thread locking compound on the adapter to caliper bolts which caused a moment or two of dread wondering if I might round out the 4mm hex bolt head due to the excessive amount of force needed to break the bolts free. But in the end, I got the deed done.

The brake calipers and cage mounted to my Singular Cycles Gryphon Mk3.

I chose my Singular Cycles Gryphon Mk3 as the test mule for these items as it uses flat mount brakes and the Old Man Mountain Elkhorn Rack is mounted to it which has Three-Pack bosses on its struts. The Cargo Cage's mounting options allowed for a lower mounting of the cage, which in comparison to my other cargo cage, which does not allow for such an option, it is a better cage to use if you want a lower center of gravity for your cargo. 

The molded straps were  a breeze to use, as mentioned already. I should have gotten some of these a long time ago! The cage seems sturdy enough to carry most bikepacking type loads, and with those straps, I would not worry about losing anything. 

The calipers are a very different feel in terms of braking. I have had both all-mechanical and fully hydraulic systems, but never a hybrid of the two. This bike had TRP Spyre calipers on it previously, which I have liked, but they do not have a lot of "power" to them. They will stop you, but they don't have that "lock-em up" type of power that my fully hydraulic sets do. That's really okay on a gravel bike because getting your tire to gain purchase on what amounts to stone marbles doesn't require ultimate power. But in a bikepacking situation, where you have a lot of weight involved? 

That's when I'd want more than what the TRP Spyre's are capable of. I think the State Bicycle Co All-Road Calipers will be different. My initial impressions are that the calipers have a much more powerful bite on the rotors I am using. By the way, these brakes have been dead quiet so far as well. 

I'll have to reserve more comments on the brakes until I get them bedded in better and when I have had more time on them. But things look promising here. I like that the pads are Shimano compatible, because those are easier to find and there are more options available as well. The durability of the calipers is yet to be determined, but the build quality looks impressive to me. 

Weights: Cargo Cage: 168 grams. All-Road Disc Brake Calipers: 356 grams / set. (As weighed on my digital table-top scale) 

Stay tuned for updates as I get them ready to share.

Review: State Bicycle Co. Cargo Cage, All-Road Disc Calipers

Note: I received the products mentioned in this review at no charge to me. State Bicycle Co. did not bribe me, nor are they paying me for this review. I always strive to give my honest thoughts and opinions throughout. 

Hey, when you are a reviewer of products, you often times are subject to the whims and foibles of marketing folk. You hardly ever get to work with the same person for long, as the door seems to be a revolving one at those firms, and so it becomes a situation where the goal posts get moved all the time in terms of how, or even if, I will get stuff in to test/review. 

A great example of this would be the current products featured in today's post. The same firm I am dealing with here asked me if I wanted to review some shoes and I said "yes", but it has been a month now, and..... This stuff here, the State Bicycle Co. stuff, I said yes to just last Wednesday and it arrived at my door on Saturday. 

You just never know!

Readers here may have seen my mention of the State Bicycle Co. stuff on Friday in the "FN&V". If you caught that, you know that I was most interested in the brake calipers and the cargo cage. So, State sent that to me and well, here's the lowdown on the products....

(L-R) Silicone molded Cargo Straps, Cargo Cage, All-Road Disc Calipers.

Let's take these one at a time...

State Cargo Cage & Silicone Molded Straps: The Cargo Cage is designed to reflect the desert home of State Bicycle Co. with its cactus and mountains motif. The "SBC" logo is also there to remind you where the cage came from. The cage is crafted from 5250 aluminum alloy and features a clever slotted and ovalized hole mounting pattern allowing the rider to utilize several mounting options. This cage has a claimed weight of 168 grams and is rated to 25lbs capacity for cargo weight. The Cargo Cage sells for $24.95 and is available direct from State Bicycle Co's website here. 

The Silicone Molded Cargo Straps are an optional accessory item which can be used with the Cargo Cage or with other bags and cages. The straps measure 22mm X 56cm and have a nice buckle and strap retention loop. You can add these at purchase of the Cargo Cage or State sells these separately for $9.99.

All-Road Disc Brake Calipers: The All-Road Disc Brake Calipers can be purchased separately or as a set. These calipers are hybrid type calipers which are actuated by a cable but are hydraulic at the caliper only. 

There is not a ton of technical information on State's site about these, but the instructions in the box give us more clues and information. The calipers are actuated by an arm that displaces mineral oil inside the sealed caliper. This forces both pistons outward to cause braking action using Shimano compatible pads. (Easy replacement!) The manual says that these should never need bleeding, so they should be low maintenance. 

The manual also lets us know that these brake calipers were produced by the Chinese firm IIIPro. Checking into this online I was able to ferret out that the calipers are CNC machined, (they look like they are as well) and that the anodizing is scratch resistant. 

The calipers come with hardware to adapt the calipers to 140mm or 160mm rotors, which should accommodate most gravel bikes. The price from State for a pair of these is $99.99. You can check out the State Bicycle Co. site for more on these here. 

First Impressions: 

The products were well presented and they looked like premium components which should work well. I especially liked that the mounting options for the cage would allow for different use scenarios. The disc brake calipers were handsome and the CNC machining marks always look cool to me. The anodization of the aluminum parts looked great and I saw nothing odd or out of place there. 

The Cargo Straps were a new thing on me. I see a lot of bikepackers using similar ones to these and now I can see why. They are about 100 times easier to use over the traditional Nylon strap and plastic buckle deals I had been using. Not to mention that these are a vast upgrade over toe-straps! 

The installation of the flat mount calipers was pretty straight forward with the exception of one thing. The front caliper adapter came set in the 140mm position. What?! Okay, so I have to switch that around. I don't know of many 140mm front applications, so I thought this was odd. Things got a bit more complicated when I found that IIIPro used a pretty aggressive thread locking compound on the adapter to caliper bolts which caused a moment or two of dread wondering if I might round out the 4mm hex bolt head due to the excessive amount of force needed to break the bolts free. But in the end, I got the deed done.

The brake calipers and cage mounted to my Singular Cycles Gryphon Mk3.

I chose my Singular Cycles Gryphon Mk3 as the test mule for these items as it uses flat mount brakes and the Old Man Mountain Elkhorn Rack is mounted to it which has Three-Pack bosses on its struts. The Cargo Cage's mounting options allowed for a lower mounting of the cage, which in comparison to my other cargo cage, which does not allow for such an option, it is a better cage to use if you want a lower center of gravity for your cargo. 

The molded straps were  a breeze to use, as mentioned already. I should have gotten some of these a long time ago! The cage seems sturdy enough to carry most bikepacking type loads, and with those straps, I would not worry about losing anything. 

The calipers are a very different feel in terms of braking. I have had both all-mechanical and fully hydraulic systems, but never a hybrid of the two. This bike had TRP Spyre calipers on it previously, which I have liked, but they do not have a lot of "power" to them. They will stop you, but they don't have that "lock-em up" type of power that my fully hydraulic sets do. That's really okay on a gravel bike because getting your tire to gain purchase on what amounts to stone marbles doesn't require ultimate power. But in a bikepacking situation, where you have a lot of weight involved? 

That's when I'd want more than what the TRP Spyre's are capable of. I think the State Bicycle Co All-Road Calipers will be different. My initial impressions are that the calipers have a much more powerful bite on the rotors I am using. By the way, these brakes have been dead quiet so far as well. 

I'll have to reserve more comments on the brakes until I get them bedded in better and when I have had more time on them. But things look promising here. I like that the pads are Shimano compatible, because those are easier to find and there are more options available as well. The durability of the calipers is yet to be determined, but the build quality looks impressive to me. 

Weights: Cargo Cage: 168 grams. All-Road Disc Brake Calipers: 356 grams / set. (As weighed on my digital table-top scale) 

Stay tuned for updates as I get them ready to share.

Monday, August 14, 2023

Frustrated

The past week has been one of a bit of frustration in terms of getting out to ride. Either my time has been short or I woke up feeling poorly so that no country rides were happening. 

I did have one day where I was going to go and ride but that dratted GPS computer frustrated me so much that day that I nearly lost it and I ended up just aimlessly riding around town trying to calm down. 

I tell ya....technology and devices. That stuff is bad news. Or I should say, 'It can be bad news". For me, at any rate. 

Then there was the "Truck With No Name", which had to go to the shop and I spent 2K getting it up to snuff. I still have to fix the inner driver's side door handle yet. And the locks don't work either. Hrumpf.... 

It wasn't all bad. But it was "one of those weeks". The fact that we had some perfect "blue sky" days in there didn't help me either. I guess not riding and having clean air to breath is better than what we had here most of June! And we've had some timely rains. So that dust surely has settled a bit. Can't wait to get out there to check it all out soon......

Frustrated

The past week has been one of a bit of frustration in terms of getting out to ride. Either my time has been short or I woke up feeling poorly so that no country rides were happening. 

I did have one day where I was going to go and ride but that dratted GPS computer frustrated me so much that day that I nearly lost it and I ended up just aimlessly riding around town trying to calm down. 

I tell ya....technology and devices. That stuff is bad news. Or I should say, 'It can be bad news". For me, at any rate. 

Then there was the "Truck With No Name", which had to go to the shop and I spent 2K getting it up to snuff. I still have to fix the inner driver's side door handle yet. And the locks don't work either. Hrumpf.... 

It wasn't all bad. But it was "one of those weeks". The fact that we had some perfect "blue sky" days in there didn't help me either. I guess not riding and having clean air to breath is better than what we had here most of June! And we've had some timely rains. So that dust surely has settled a bit. Can't wait to get out there to check it all out soon......

Sunday, August 13, 2023

The GTDRI Stories: The Eleventh One - Part 1

 "The GTDRI Stories" is a series telling the history, untold tales, and showing the sights from the run of Guitar Ted Death Ride Invitationals. This series will run on Sundays. Thanks for reading!

Well, once again, on the last day of RAGBRAI, (which is what I settled on thereafter for the date for the GTDRI rides, I rolled out of my own bed at 4:00am to do a big ride on a very humid day. That's one thing I almost always get wrong. I never get a good night's sleep before any big ride. I know that you should, and that you should all the time anyway, but I never get that bit right. 

So, we met at Prairie Grove Park, and I guess you could say this GTDRI had more than one surprise rider. It had several, actually, and most of this crew were "rookies" to the GTDRI. But that didn't mean then what it used to mean a decade before this ride. Ten years before a "rookie" GTDRI rider likely had never ridden a gravel event before. Now? Pfffft! 

Scott Sumpter, a veteran of Trans Iowa and who was one of the few people to ever finish the Trans Iowa Master's Course. Jon Duke, a man who had ridden the gravel around his home near Grinnell and was familiar with Trans Iowa. A trio of guys from the Des Moines area in Rick Chalfant, Brian Terhark, and Dave Schnieder had all ridden in gravel events before. To call these new guys to the GTDRI "rookies" was basically nonsense. Then you had Josh Lederman, Tony McGrane, and myself, all seasoned gravel riders. 

It was an odd morning, but in a case of irony, it was much like the very first GTDRI, not only in the choice for the course, but in the fact that it was very foggy and muggy to start out with. In fact, the two days were so similar it was eerie. 

There really wasn't much of anything to tell about this ride in its beginning phase. It was going along at a fine pace and with no issues. People were getting along well. Typical stuff. It wouldn't be until later on where things started to get much more interesting. 

I suppose the heavy air and gloomy skies didn't help, but whatever it was, this ride doesn't register with me until later on into the day when things got a bit more adventurous and a little more difficult for me. Oh! And the Sun came out. That's always my undoing when it is so humid on top of that.

270th in Tama County

There are some crazy, crazy roads in Iowa, and Tama County is home to a fair share of those. One of them that I have used several times for rides is 270th between C and D Avenues. I did not use it for the first GTDRI because this was where I made a wrong turn during that first ride and ended up adding mileage. Plus, we went around the section of dirt road I wanted to have in the route. So, this time I rectified the mistake by making sure we rode, well.....mostly walked, is really what we did. Anyway, we experienced that part of the route. Let's put it that way!

What is more, this road, due to its heavy tree cover and shelter from winds, was very wet. And Tama County has very clay-ish soils, so we were all clagged up with mud on our feet and on our bikes after getting through the 3/4's of a mile of goo. 

I know that to a lot of people this may sound like a really bad thing to have to experience, and it can be, especially if you don't take the time to appreciate the wildness, the remoteness, and uniqueness of the situation you are in. We are constantly surrounded by technology, easy life, and a disconnection from nature, and well.....dirt. Traveling across a muddy dirt road at bicycle/walking speeds in an area, one of the few anymore, that has zero connection to the outside world, is, in my opinion, an amazing opportunity. One that should be savored and relished to the utmost. Yeah, it'll slow you down, and there is a fair amount of risk to equipment, but to my mind? This stuff is what gravel riders - not racers - live for. This is a big reason why we ride gravel, and the Level B, Minimum Maintenance, or whatever you call it in your area, represents that whole experience for many of us. 

It is why the group rides that feature a bunch of dirt roads gets riders all excited to this very day. It is more than just a dirt road. It means a lot more than that. But I'll leave it at that and move on. This is about the GTDRI. 

The group clearing out mud from frames and cleats

In my opinion, this was one of the major highlights of the 2016 GTDRI. Maybe it was because this was where I started to fall apart in terms of my performance, or maybe because this is when the Sun started coming out. Probably both. Anyway, we had to roll on across the rollers in Tama County toward Gladbrook and our mid-day stop. 

I recall suffering all the way there and I had a gut feeling I was in big trouble as far as making a go at the entire loop. But, as usual, I soldiered on and did as well as I could. But yeah, the whole "death" part of the Guitar Ted Death Ride Invitational was in full effect for me from this point onward. 

Preparing to depart from the Casey's in Gladbrook, Iowa.

North of Gladbrook, Iowa, we would make a left turn to the West and hit a Level B Road which featured in Trans Iowa v9. This ride, the GTDRI, often was a preview, in part, of Trans Iowa courses, and it started right out of the gate, although it took several years for that dirt road to make it into a TI, it did. 

The first time I rode this road in 2006 the corn was planted right up to the edges of this dirt road.

This was a big push Westward that would take us to Eldora, Iowa. This was not a part of the original route plan, but Steamboat Rock, at that time, did not have a convenience store, so I rerouted over to Eldora, which worked out nicely. It was rough going for me, and the Sun was beating down on us all at this point. Brutal humidity made it feel as though we were cooking. Not a good deal!

Josh Lederman, (L) and Scott Sumpter (R) chatting at a stop to gather up riders just before getting to Eldora.

I was dragging behind the group by this point and I was not only feeling it physically, but now mentally I was feeling bad for dragging the group down. Everyone was very supportive though and I cannot ask for, or could ever ask for, better people to ride with. Despite my not knowing several of them well, that didn't matter. Everyone was very kind and considerate. This was something I always appreciated about this ride. People that attended were always very kind. Not just to me, but to each other as well. 

Next: The final bits where I totally unraveled and had to send the group onward on their own.

The GTDRI Stories: The Eleventh One - Part 1

 "The GTDRI Stories" is a series telling the history, untold tales, and showing the sights from the run of Guitar Ted Death Ride Invitationals. This series will run on Sundays. Thanks for reading!

Well, once again, on the last day of RAGBRAI, (which is what I settled on thereafter for the date for the GTDRI rides, I rolled out of my own bed at 4:00am to do a big ride on a very humid day. That's one thing I almost always get wrong. I never get a good night's sleep before any big ride. I know that you should, and that you should all the time anyway, but I never get that bit right. 

So, we met at Prairie Grove Park, and I guess you could say this GTDRI had more than one surprise rider. It had several, actually, and most of this crew were "rookies" to the GTDRI. But that didn't mean then what it used to mean a decade before this ride. Ten years before a "rookie" GTDRI rider likely had never ridden a gravel event before. Now? Pfffft! 

Scott Sumpter, a veteran of Trans Iowa and who was one of the few people to ever finish the Trans Iowa Master's Course. Jon Duke, a man who had ridden the gravel around his home near Grinnell and was familiar with Trans Iowa. A trio of guys from the Des Moines area in Rick Chalfant, Brian Terhark, and Dave Schnieder had all ridden in gravel events before. To call these new guys to the GTDRI "rookies" was basically nonsense. Then you had Josh Lederman, Tony McGrane, and myself, all seasoned gravel riders. 

It was an odd morning, but in a case of irony, it was much like the very first GTDRI, not only in the choice for the course, but in the fact that it was very foggy and muggy to start out with. In fact, the two days were so similar it was eerie. 

There really wasn't much of anything to tell about this ride in its beginning phase. It was going along at a fine pace and with no issues. People were getting along well. Typical stuff. It wouldn't be until later on where things started to get much more interesting. 

I suppose the heavy air and gloomy skies didn't help, but whatever it was, this ride doesn't register with me until later on into the day when things got a bit more adventurous and a little more difficult for me. Oh! And the Sun came out. That's always my undoing when it is so humid on top of that.

270th in Tama County

There are some crazy, crazy roads in Iowa, and Tama County is home to a fair share of those. One of them that I have used several times for rides is 270th between C and D Avenues. I did not use it for the first GTDRI because this was where I made a wrong turn during that first ride and ended up adding mileage. Plus, we went around the section of dirt road I wanted to have in the route. So, this time I rectified the mistake by making sure we rode, well.....mostly walked, is really what we did. Anyway, we experienced that part of the route. Let's put it that way!

What is more, this road, due to its heavy tree cover and shelter from winds, was very wet. And Tama County has very clay-ish soils, so we were all clagged up with mud on our feet and on our bikes after getting through the 3/4's of a mile of goo. 

I know that to a lot of people this may sound like a really bad thing to have to experience, and it can be, especially if you don't take the time to appreciate the wildness, the remoteness, and uniqueness of the situation you are in. We are constantly surrounded by technology, easy life, and a disconnection from nature, and well.....dirt. Traveling across a muddy dirt road at bicycle/walking speeds in an area, one of the few anymore, that has zero connection to the outside world, is, in my opinion, an amazing opportunity. One that should be savored and relished to the utmost. Yeah, it'll slow you down, and there is a fair amount of risk to equipment, but to my mind? This stuff is what gravel riders - not racers - live for. This is a big reason why we ride gravel, and the Level B, Minimum Maintenance, or whatever you call it in your area, represents that whole experience for many of us. 

It is why the group rides that feature a bunch of dirt roads gets riders all excited to this very day. It is more than just a dirt road. It means a lot more than that. But I'll leave it at that and move on. This is about the GTDRI. 

The group clearing out mud from frames and cleats

In my opinion, this was one of the major highlights of the 2016 GTDRI. Maybe it was because this was where I started to fall apart in terms of my performance, or maybe because this is when the Sun started coming out. Probably both. Anyway, we had to roll on across the rollers in Tama County toward Gladbrook and our mid-day stop. 

I recall suffering all the way there and I had a gut feeling I was in big trouble as far as making a go at the entire loop. But, as usual, I soldiered on and did as well as I could. But yeah, the whole "death" part of the Guitar Ted Death Ride Invitational was in full effect for me from this point onward. 

Preparing to depart from the Casey's in Gladbrook, Iowa.

North of Gladbrook, Iowa, we would make a left turn to the West and hit a Level B Road which featured in Trans Iowa v9. This ride, the GTDRI, often was a preview, in part, of Trans Iowa courses, and it started right out of the gate, although it took several years for that dirt road to make it into a TI, it did. 

The first time I rode this road in 2006 the corn was planted right up to the edges of this dirt road.

This was a big push Westward that would take us to Eldora, Iowa. This was not a part of the original route plan, but Steamboat Rock, at that time, did not have a convenience store, so I rerouted over to Eldora, which worked out nicely. It was rough going for me, and the Sun was beating down on us all at this point. Brutal humidity made it feel as though we were cooking. Not a good deal!

Josh Lederman, (L) and Scott Sumpter (R) chatting at a stop to gather up riders just before getting to Eldora.

I was dragging behind the group by this point and I was not only feeling it physically, but now mentally I was feeling bad for dragging the group down. Everyone was very supportive though and I cannot ask for, or could ever ask for, better people to ride with. Despite my not knowing several of them well, that didn't matter. Everyone was very kind and considerate. This was something I always appreciated about this ride. People that attended were always very kind. Not just to me, but to each other as well. 

Next: The final bits where I totally unraveled and had to send the group onward on their own.

Saturday, August 12, 2023

Fat Tires On Gravel: From Krampus To Gryphon

 Another Fat Fargo Idea

After a hiatus due to changes in my life, the idea of fat tires on gravel was bubbling back up to the surface again. This time in the form of some tires that I was gifted back in September of 2020 and also by a development from Black Mountain Cycles owner Mike Varley. 

The spark was coming at a time when, as you all probably remember now, we had a LOT of time to cook up ideas. The pandemic was in high gear, and we all were sat with worry and wonder. Anything to take our minds off that madness was welcomed, and so cooking up fat tire gravel ideas was back on the menu again. 

Mike Varley sent the first idea sparkling across the universe of imaginations when he let on that he had a new model in mind dubbed La Cabra.  It was painfully close to what I wanted, but it wasn't designed to be a corpulent gravel road crusher with 29+ wheels. Nope! 650B fat only, and I'd already been down that road. 

Then there was the Mone' El Continente', a 29+ masterpiece of custom brazed steel that looked fantastic, and expensive. While that was mildly tempting, it wasn't something I found that was going to be very practical to obtain at that time. 

The Black Mountain Cycles LaCabra was gorgeous, but not quite "it" for me.

The Mone' El Continente' is a stunner, but a bit too spendy.

At the time, I was working at Andy's Bike shop. The times were tough and money was tight, but Andy and I made things work. We supported each other's cycling habits when we could. One way that happened was my gifting Andy my Surly 1X1, since it fit him, and he obviously liked the bike. He would do things in turn for me, as when he gifted me a set of Surly Extraterrestrial tires in 700 X 2.5" size. 

I figured that these might be fun on my Gen I Fargo, but.... I remembered how 27.5 X 2.8" tires would barely pass the chain stays on that bike. What would a 29 X 2.5" tire be like? I had an appropriate wheel set to test this out with that had old Bontrager Duster rims. Okay, so let's see about it....

The Gen I Fargo with Surly Extraterrestrial 29 X 2.5 tires.

And you know what? It worked! Yeah....the tires are pigs in this size, but it worked! I was stoked on the possibilities. That said, this was still not quite right because the tires still were too big for the frame, the tires in 29 X 2.5 are mostly pretty knobby, so replacing these was going to not work out, and it messed up the bottom bracket height a bit too, which I am a bit sensitive to, I'll admit that.

So, while this was encouraging, it wasn't quite there yet, and I ended up going a different direction with the Fargo pretty quickly thereafter. But again, the idea was sound, I just knew it was, and if I could get a line on the right frame and fork without having to pay for a custom frame and fork, I was going to bite on that. Whatever it might be. 

Next: The Gryphon Mk3 comes along.

Fat Tires On Gravel: From Krampus To Gryphon

 Another Fat Fargo Idea

After a hiatus due to changes in my life, the idea of fat tires on gravel was bubbling back up to the surface again. This time in the form of some tires that I was gifted back in September of 2020 and also by a development from Black Mountain Cycles owner Mike Varley. 

The spark was coming at a time when, as you all probably remember now, we had a LOT of time to cook up ideas. The pandemic was in high gear, and we all were sat with worry and wonder. Anything to take our minds off that madness was welcomed, and so cooking up fat tire gravel ideas was back on the menu again. 

Mike Varley sent the first idea sparkling across the universe of imaginations when he let on that he had a new model in mind dubbed La Cabra.  It was painfully close to what I wanted, but it wasn't designed to be a corpulent gravel road crusher with 29+ wheels. Nope! 650B fat only, and I'd already been down that road. 

Then there was the Mone' El Continente', a 29+ masterpiece of custom brazed steel that looked fantastic, and expensive. While that was mildly tempting, it wasn't something I found that was going to be very practical to obtain at that time. 

The Black Mountain Cycles LaCabra was gorgeous, but not quite "it" for me.

The Mone' El Continente' is a stunner, but a bit too spendy.

At the time, I was working at Andy's Bike shop. The times were tough and money was tight, but Andy and I made things work. We supported each other's cycling habits when we could. One way that happened was my gifting Andy my Surly 1X1, since it fit him, and he obviously liked the bike. He would do things in turn for me, as when he gifted me a set of Surly Extraterrestrial tires in 700 X 2.5" size. 

I figured that these might be fun on my Gen I Fargo, but.... I remembered how 27.5 X 2.8" tires would barely pass the chain stays on that bike. What would a 29 X 2.5" tire be like? I had an appropriate wheel set to test this out with that had old Bontrager Duster rims. Okay, so let's see about it....

The Gen I Fargo with Surly Extraterrestrial 29 X 2.5 tires.

And you know what? It worked! Yeah....the tires are pigs in this size, but it worked! I was stoked on the possibilities. That said, this was still not quite right because the tires still were too big for the frame, the tires in 29 X 2.5 are mostly pretty knobby, so replacing these was going to not work out, and it messed up the bottom bracket height a bit too, which I am a bit sensitive to, I'll admit that.

So, while this was encouraging, it wasn't quite there yet, and I ended up going a different direction with the Fargo pretty quickly thereafter. But again, the idea was sound, I just knew it was, and if I could get a line on the right frame and fork without having to pay for a custom frame and fork, I was going to bite on that. Whatever it might be. 

Next: The Gryphon Mk3 comes along.

Friday, August 11, 2023

Friday News And Views

Jay Petervary showed this Esker prototype on Facebook recently.
"THIS is a "Bikepack" bike. ":

So says Jay Petervary on his Facebook page on Thursday where he posted the image shown here. JP has been showing views of this bike for the past week as he ramps up to do his latest ride on the Great Divide Route which he is calling "Great Divide Unearthed". 

 Comments; I'll be honest - I did not think this was anything "new" when I first laid eyes on it. That's because JP had been on the Iditarod several years ago on a Salsa Cycles Blackborow. The "long-tailed" version of that bike, which JP had special bags made for and modified slightly. I assumed at first glance that this was an unmarked Blackborow frame set up with 29"er wheels and tires. But if you look closely at the downtube, you can barely make out the "Esker" name. So, I assumed incorrectly. This appears to be a new Esker prototype. 

The idea may have its genesis in that old Blackborow, but I am sure JP and Esker have tweaked the idea out to be what they feel is the "ultimate" bikepacking bike. I know that the long wheel base may seem weird and undesirable at first, but a route like the Great Divide doesn't call out for a bike that has to have tight cornering traits.  Comfort is king, and longer frame tube members have more inherent "flex" and therefore can absorb and dissipate more vibration energy than a shorter, stiffer frame tube will be capable of absorbing. 

Plus, just look at all that frame bag real estate! And it is all in-line with the bike. Nothing sticking out into the wind, although quartering cross winds may be an issue at times. It will be interesting to see if the bike does what Esker and JP are hoping it will do.  

State Bicycle Co All-Road Disc Calipers (Image courtesy of State Bicycle Co)
State Bicycle Co. Announces New Components & More:

Wednesday State Bicycle Co. announced a round of component and apparel offerings. I won't get into the gist of all of the stuff announced, but two items did jump out at me. 

First up we have the State Bicycle Co. All-Road Disc Calipers. These are hydraulic at the caliper, but actuated by cable. So, your older mechanical group can be used with these for (assumed) greater breaking performance. There have been other offerings similar to this like the TRP HyRd, Yokozuna, and the very similar Juin Tech models. The amazing thing about the State offering is that the All-Road Disc calipers sell for a hundred bucks per set. That's a pretty good deal.
 

The State Cargo Cage (Image courtesy of State Bicycle Co)
State also announced an interesting cargo cage, similar in vein to an Anything Cage, it can mount to those Three-Pack bosses found on many forks these days, or under a down tube, or off a rack like the Old Man Mountain Elkhorn, or similar racks. 

The State Cargo Cage is made from aircraft grade aluminum and it features a desert design which reflects State Bicycle Co's Arizona home base. 

The cage weighs in at 168 grams and can carry up to 25lbs of cargo, according to State. The cage sells for $24.99 USD. 

State offers a titanium bolt kit in three colors at an up-charge along with optional rubber straps which can be purchased separately as well. 

It's pretty interesting how what was a fixed gear/urban cycling brand has managed to diversify and stay relevant in the 2020's. (Remember the fixie craze? Woo! That was a while ago now!) So, maybe I shouldn't be all that surprised that State Bicycle Co. has branched out into these accessory and component categories with aggressive price-points and clever designs. But I have to admit, those brake calipers came out of left field for me.  

New episode!

Guitar Ted Podcast Episode #24:

You've read all about the Gravel Worlds history and the UCI vs Gravel Worlds thing this week. If you want more, or if you would rather listen than go back and read it all, hit THIS LINK. 

We also have the Gravel Amplifier which features the Limestone 66.6, Iowa Single Speed Gravel Championships. N.Y. Roll has another event as well. 

We also get into that Jay Petervary rig above, so if you want to know more of our thoughts on that, listen to the latest episode. 

We're hoping to get a post-Gravel Worlds interview with one of their principals when they are ready, maybe Jason Strobehn, who let me know he'd like to be on the podcast at some point. But we'll see who we can rustle up in a few weeks. Stay tuned on that one. Another episode is going to cover CORE4 and N.Y. Roll's experience there at Iowa's largest cycling race. 

Detail Image of a Gorilla Monsoon (Image courtesy of All City Bicycles)

All City Cycles To Be Shuttered By QBP:

Last evening news broke on social media that All City Bicycles, a Quality Bicycle Products brand, is to be phased out over the next few years. The news, apparently rumored for months amongst shop owners, was made official by "The Radavist", who published a dealer email they got a hold of from someone in the cycling industry. 

Comments: I recall first seeing the brand "All City" at Frostbike in the mid-2000's. At that time all the brand amounted to was a few chain rings and accessories for fixed gear riding, which was a phase cycling was going through at the time. (See State Bicycle Co. above)

I didn't think it would last, but to Jeff Frane's credit, the brand rose above merely being a fixed gear bike brand and it made a name for itself amongst the cycling's various niche brands. Bicycles like the Nature Boy, the Macho Man, and the Mr. Pink set the brand apart from a crowded marketplace and were always made from steel. 

They innovated as well, maybe most memorably by developing an elegant disc brake drop out which was designed by Anna Schwinn. 

The brand could be seen as an "upscale Surly" offering, but it had a personality and style which was immediately evident. Mr. Frane eventually left the company several years ago and stated Wilde Bikes, which has carried on some of the flair which marked the AC brand while he was at the helm there. 

Why the brand is being phased out is not entirely clear, but it is no secret that parent company QBP has been laying off employees and contracting its business in response to the over-stock issues within the industry and the lack of consumer demand. QBP claims that no new AC product will be developed after the 2024 model run and that it will be "several years" before the brand is completely phased out. What this means to consumers is that All City is essentially gone, effective immediately. Support for current models will be maintained for a time. 

I've thought that we'd see some contraction of brands in the marketplace and I am confident we will be seeing more before the end of the year. Time will tell if I am correct, but this development with All City will not be unique.

That's it for this week. Thanks for reading Guitar Ted Productions!