Showing posts with label Fat Fargo v2. Show all posts
Showing posts with label Fat Fargo v2. Show all posts

Saturday, August 12, 2023

Fat Tires On Gravel: From Krampus To Gryphon

 Another Fat Fargo Idea

After a hiatus due to changes in my life, the idea of fat tires on gravel was bubbling back up to the surface again. This time in the form of some tires that I was gifted back in September of 2020 and also by a development from Black Mountain Cycles owner Mike Varley. 

The spark was coming at a time when, as you all probably remember now, we had a LOT of time to cook up ideas. The pandemic was in high gear, and we all were sat with worry and wonder. Anything to take our minds off that madness was welcomed, and so cooking up fat tire gravel ideas was back on the menu again. 

Mike Varley sent the first idea sparkling across the universe of imaginations when he let on that he had a new model in mind dubbed La Cabra.  It was painfully close to what I wanted, but it wasn't designed to be a corpulent gravel road crusher with 29+ wheels. Nope! 650B fat only, and I'd already been down that road. 

Then there was the Mone' El Continente', a 29+ masterpiece of custom brazed steel that looked fantastic, and expensive. While that was mildly tempting, it wasn't something I found that was going to be very practical to obtain at that time. 

The Black Mountain Cycles LaCabra was gorgeous, but not quite "it" for me.

The Mone' El Continente' is a stunner, but a bit too spendy.

At the time, I was working at Andy's Bike shop. The times were tough and money was tight, but Andy and I made things work. We supported each other's cycling habits when we could. One way that happened was my gifting Andy my Surly 1X1, since it fit him, and he obviously liked the bike. He would do things in turn for me, as when he gifted me a set of Surly Extraterrestrial tires in 700 X 2.5" size. 

I figured that these might be fun on my Gen I Fargo, but.... I remembered how 27.5 X 2.8" tires would barely pass the chain stays on that bike. What would a 29 X 2.5" tire be like? I had an appropriate wheel set to test this out with that had old Bontrager Duster rims. Okay, so let's see about it....

The Gen I Fargo with Surly Extraterrestrial 29 X 2.5 tires.

And you know what? It worked! Yeah....the tires are pigs in this size, but it worked! I was stoked on the possibilities. That said, this was still not quite right because the tires still were too big for the frame, the tires in 29 X 2.5 are mostly pretty knobby, so replacing these was going to not work out, and it messed up the bottom bracket height a bit too, which I am a bit sensitive to, I'll admit that.

So, while this was encouraging, it wasn't quite there yet, and I ended up going a different direction with the Fargo pretty quickly thereafter. But again, the idea was sound, I just knew it was, and if I could get a line on the right frame and fork without having to pay for a custom frame and fork, I was going to bite on that. Whatever it might be. 

Next: The Gryphon Mk3 comes along.

Fat Tires On Gravel: From Krampus To Gryphon

 Another Fat Fargo Idea

After a hiatus due to changes in my life, the idea of fat tires on gravel was bubbling back up to the surface again. This time in the form of some tires that I was gifted back in September of 2020 and also by a development from Black Mountain Cycles owner Mike Varley. 

The spark was coming at a time when, as you all probably remember now, we had a LOT of time to cook up ideas. The pandemic was in high gear, and we all were sat with worry and wonder. Anything to take our minds off that madness was welcomed, and so cooking up fat tire gravel ideas was back on the menu again. 

Mike Varley sent the first idea sparkling across the universe of imaginations when he let on that he had a new model in mind dubbed La Cabra.  It was painfully close to what I wanted, but it wasn't designed to be a corpulent gravel road crusher with 29+ wheels. Nope! 650B fat only, and I'd already been down that road. 

Then there was the Mone' El Continente', a 29+ masterpiece of custom brazed steel that looked fantastic, and expensive. While that was mildly tempting, it wasn't something I found that was going to be very practical to obtain at that time. 

The Black Mountain Cycles LaCabra was gorgeous, but not quite "it" for me.

The Mone' El Continente' is a stunner, but a bit too spendy.

At the time, I was working at Andy's Bike shop. The times were tough and money was tight, but Andy and I made things work. We supported each other's cycling habits when we could. One way that happened was my gifting Andy my Surly 1X1, since it fit him, and he obviously liked the bike. He would do things in turn for me, as when he gifted me a set of Surly Extraterrestrial tires in 700 X 2.5" size. 

I figured that these might be fun on my Gen I Fargo, but.... I remembered how 27.5 X 2.8" tires would barely pass the chain stays on that bike. What would a 29 X 2.5" tire be like? I had an appropriate wheel set to test this out with that had old Bontrager Duster rims. Okay, so let's see about it....

The Gen I Fargo with Surly Extraterrestrial 29 X 2.5 tires.

And you know what? It worked! Yeah....the tires are pigs in this size, but it worked! I was stoked on the possibilities. That said, this was still not quite right because the tires still were too big for the frame, the tires in 29 X 2.5 are mostly pretty knobby, so replacing these was going to not work out, and it messed up the bottom bracket height a bit too, which I am a bit sensitive to, I'll admit that.

So, while this was encouraging, it wasn't quite there yet, and I ended up going a different direction with the Fargo pretty quickly thereafter. But again, the idea was sound, I just knew it was, and if I could get a line on the right frame and fork without having to pay for a custom frame and fork, I was going to bite on that. Whatever it might be. 

Next: The Gryphon Mk3 comes along.

Saturday, September 26, 2020

Fat Fargo v2


The original Fat Fargo experiment did not work. 
 
Five years ago I tried 650B X 2.8" wheels in my Fargo Gen I bike. I was really hoping that it would work, but there were issues. First, the clearances were minimal. The tires would spin freely, but there wasn't much room there with the fat 27.5"ers. 

The second thing was that the smaller wheel diameter put the bottom bracket on this bike in the weeds. That wasn't going to fly at all. So, I abandoned that idea, pulled the wheels off, and stuck them in my Fargo Gen 2 bike which I used to own. The wheels stayed there until I sold the bike and then those wheels went on the Sawyer which was sold recently. 

The B+ experiment was a qualified success. I did a couple of things, which in my looking back on it, were very unlike what the industry did with the idea, or what many riders did with the idea. Had I modified one component in that wheel assembly, the experiment likely would have been short lived. So, what was it that made it so compelling? 

I think the main ingredient was the WTB Trailblazer 2.8" tires. Had the tires been anything other than this tread pattern, I likely would have bailed out on the trial sooner. Much sooner. See, the Trailblazer had certain attributes that made it ideal for my applications. First, it wasn't too wide. It was a true 2.8", but it didn't have a super wide casing, so it fit the Fargo, and it made the tire ride well on the rims I chose to use. 

Those rims were Velocity Blunt 35's. They were far narrower internally than what the industry first went with for B+ tires, and far narrower than what most riders thought they needed. However; that narrow profile crowned up what was a really flat profile. The WTB Trailblazer was a very flat tire putting a LOT of its tread width on the ground, especially by the popular pairing of this tire with 50mm wide rims. This made the tire slow, but the Blunt 35's made the tire ride reasonably fast for its size. Especially on that center ridge the Trailblazers have. 

Me riding the Fat Fargo (Gen 2) at Odin's Revenge. Image by Wally Kilburg

I had some excellent rides on the Fat Fargo (The Gen 2 Fargo). I used it to great effect at the "muddy year" of the DK200 and later at Odin's Revenge. The big tires had their day in the Sun in specific conditions where some float was advantageous, but a fast rolling tire was paramount to success. 

The set up was good, but there were some things that weren't so good. Big diameter wheels just were much more to my liking. Once I had ridden a fat bike set up with some very light 29+ wheels, I was smitten by the possibilities of having a large diameter wheel with a wider tire in the 2.8" - 3.0" range. However; manufacturers didn't quite see things that way, offering few choices, and most of what was available was over-built, suspension corrected, or more mountain bike-like. 

So, despite the 'almost but not quite' 2.8" Fat Fargo set up, I ended up going back to 29"er wheels for the Fargo Gen I and rode that bike so much I sold off the Gen 2 version and as stated earlier, moved the wheels over to the Sawyer. Then gravel bikes took off and well...... I left the Fat Fargo idea to simmer, maybe never coming back to it at all. 

However, the other day I was offered some 29" X 2.5" Surly Extraterrestrial tires that Andy, of Andy's Bike Shop, had which he never used, or if he did, very little. They looked nearly perfect. Now Extraterrestrials were a tire I was very familiar with, having run them on the 1X1, ironically now in Andy's possession. They are heavy tires, but they roll fast, are tubeless ready, and are very voluminous for their size. I was quite tempted many a time to run the Surly as a gravel bike, as one of its previous owners, Jeff Kerkove had. But I never got around to it. 

These tires in 29'er size? Intriguing. I took them with plans to mount them on my old Gen I Fargo. That bike is set up with a rather pedestrian, and very heavy wheel set, a Bontrager Duster wheel set laced to Shimano Deore hubs. Nothing too fantastic but a serviceable wheel set. Duster rims are modestly wide, and in fact, are about the same width many 'gravel' rims are now. I was afraid to mount these big, voluminous tires to anything wider or they may not fit into the Gen I Fargo. 

The Fat Fargo v2 with 29" X 2.5" Surly Extraterrestrial tires.

Well, happily, they did fit. The clearances are acceptable, and these tires, while not quite the volume of a 3.0" tire, have the same, or very close to it, volume of the old 2.8 Trailblazers. I know it says 2.5" on the tire, but on these narrow-ish rims, they already have puffed up to exactly 2.5" and I suspect that they will stretch a bit beyond this, as the 26"ers I had did. 

Will they scratch the itch I have for large diameter wheels and big, floaty tires? That's yet to be determined, but if they end up being anything like what the 1X1 was like, hmm.......I think maybe- yes. And if they do pass that test, ah........new lighter wheels will be in order. There is no denying the weight and inertia these monsters have now, and a LOT of the fat is in the hubs here. Those Deore disc hubs weigh a ton. 

There are a few other 'upgrades' to come to the Fargo Gen I, so stay tuned for those and I think you will be surprised by a couple of the things I have in mind to do here.

Fat Fargo v2


The original Fat Fargo experiment did not work. 
 
Five years ago I tried 650B X 2.8" wheels in my Fargo Gen I bike. I was really hoping that it would work, but there were issues. First, the clearances were minimal. The tires would spin freely, but there wasn't much room there with the fat 27.5"ers. 

The second thing was that the smaller wheel diameter put the bottom bracket on this bike in the weeds. That wasn't going to fly at all. So, I abandoned that idea, pulled the wheels off, and stuck them in my Fargo Gen 2 bike which I used to own. The wheels stayed there until I sold the bike and then those wheels went on the Sawyer which was sold recently. 

The B+ experiment was a qualified success. I did a couple of things, which in my looking back on it, were very unlike what the industry did with the idea, or what many riders did with the idea. Had I modified one component in that wheel assembly, the experiment likely would have been short lived. So, what was it that made it so compelling? 

I think the main ingredient was the WTB Trailblazer 2.8" tires. Had the tires been anything other than this tread pattern, I likely would have bailed out on the trial sooner. Much sooner. See, the Trailblazer had certain attributes that made it ideal for my applications. First, it wasn't too wide. It was a true 2.8", but it didn't have a super wide casing, so it fit the Fargo, and it made the tire ride well on the rims I chose to use. 

Those rims were Velocity Blunt 35's. They were far narrower internally than what the industry first went with for B+ tires, and far narrower than what most riders thought they needed. However; that narrow profile crowned up what was a really flat profile. The WTB Trailblazer was a very flat tire putting a LOT of its tread width on the ground, especially by the popular pairing of this tire with 50mm wide rims. This made the tire slow, but the Blunt 35's made the tire ride reasonably fast for its size. Especially on that center ridge the Trailblazers have. 

Me riding the Fat Fargo (Gen 2) at Odin's Revenge. Image by Wally Kilburg

I had some excellent rides on the Fat Fargo (The Gen 2 Fargo). I used it to great effect at the "muddy year" of the DK200 and later at Odin's Revenge. The big tires had their day in the Sun in specific conditions where some float was advantageous, but a fast rolling tire was paramount to success. 

The set up was good, but there were some things that weren't so good. Big diameter wheels just were much more to my liking. Once I had ridden a fat bike set up with some very light 29+ wheels, I was smitten by the possibilities of having a large diameter wheel with a wider tire in the 2.8" - 3.0" range. However; manufacturers didn't quite see things that way, offering few choices, and most of what was available was over-built, suspension corrected, or more mountain bike-like. 

So, despite the 'almost but not quite' 2.8" Fat Fargo set up, I ended up going back to 29"er wheels for the Fargo Gen I and rode that bike so much I sold off the Gen 2 version and as stated earlier, moved the wheels over to the Sawyer. Then gravel bikes took off and well...... I left the Fat Fargo idea to simmer, maybe never coming back to it at all. 

However, the other day I was offered some 29" X 2.5" Surly Extraterrestrial tires that Andy, of Andy's Bike Shop, had which he never used, or if he did, very little. They looked nearly perfect. Now Extraterrestrials were a tire I was very familiar with, having run them on the 1X1, ironically now in Andy's possession. They are heavy tires, but they roll fast, are tubeless ready, and are very voluminous for their size. I was quite tempted many a time to run the Surly as a gravel bike, as one of its previous owners, Jeff Kerkove had. But I never got around to it. 

These tires in 29'er size? Intriguing. I took them with plans to mount them on my old Gen I Fargo. That bike is set up with a rather pedestrian, and very heavy wheel set, a Bontrager Duster wheel set laced to Shimano Deore hubs. Nothing too fantastic but a serviceable wheel set. Duster rims are modestly wide, and in fact, are about the same width many 'gravel' rims are now. I was afraid to mount these big, voluminous tires to anything wider or they may not fit into the Gen I Fargo. 

The Fat Fargo v2 with 29" X 2.5" Surly Extraterrestrial tires.

Well, happily, they did fit. The clearances are acceptable, and these tires, while not quite the volume of a 3.0" tire, have the same, or very close to it, volume of the old 2.8 Trailblazers. I know it says 2.5" on the tire, but on these narrow-ish rims, they already have puffed up to exactly 2.5" and I suspect that they will stretch a bit beyond this, as the 26"ers I had did. 

Will they scratch the itch I have for large diameter wheels and big, floaty tires? That's yet to be determined, but if they end up being anything like what the 1X1 was like, hmm.......I think maybe- yes. And if they do pass that test, ah........new lighter wheels will be in order. There is no denying the weight and inertia these monsters have now, and a LOT of the fat is in the hubs here. Those Deore disc hubs weigh a ton. 

There are a few other 'upgrades' to come to the Fargo Gen I, so stay tuned for those and I think you will be surprised by a couple of the things I have in mind to do here.