Monday, October 17, 2016

Trans Iowa v13: Recon Report

A sleepy Grinnell Iowa under sullen skies.
Let's see now, just how many of these missions have I been on? Too many to count. In some ways, they all start to look the same. Get up at "O-dark-thirty", get organized, hop in the truck, and for the fifth time, pick up Jeremy who does my recon with me nowadays. During the last several years, recon doesn't start without a visit to the Frontier Cafe in Grinnell. Good eats right there, and I highly recommend the place if you are ever down that way.

With that great food in the belly, we started reconning the course for the thirteenth Trans Iowa. Thirteen! I never would have guessed.......

So anyway, we got rolling, and it was with some trepidation too. The weather was weird. It looked as though it could break into a full on rain at any given time. In fact, it kept misting almost all the time in varying degrees. Sometimes it was barely enough to turn on the intermittent wipers for, and then at other times it was full on regular wiper speed and almost not cutting it at that. I think I about wore out the wiper switch Saturday!

The point was that with Level B Roads to look at, rain was going to make the recon very difficult and maybe we would have to cut things short. I was ready to give in should it do the rain thing since the Truck With No Name isn't exactly "mudder friendly", being a two wheel drive vehicle with highway tires and all. No need to try and be a hero when I might get stuck miles away from any services.

Rain was potentially only minutes away many times during the day, but it never developed beyond a heavy mist.
Well, despite all the reasons for bailing out that might happen, we were game to head out and so we did. Our initial leaving from Grinnell was a bit awkward due to road construction and missing navigation cues from Jeremy, who mistakenly thought I knew where I was going. He should know by now that I've always been a lost puppy!

Once out in the country we were headed out on the proposed course to checkpoint #1. It didn't take long to have a reminder of why it is that you have to physically go out and look with your own two eyes at your course. Any event director that doesn't actually lay there eyes on every mile of their proposed course is making a big mistake. We were initially really excited that we could drive onto the first Level B on the course. That was until we saw the following.......

Yeah...... This is the reason why I drove 488 miles Saturday. When you rely on maps and GPS tracks, they don't show you stuff like this.
A small, probably 20 yard long bridge was blockaded off and there was no way around it. Poof! There goes your course idea, as this was the only through road in the direction I wanted to go for 5-6 miles in either direction. Dang it!

Jeremy and I improvised a quick re-route, but it won't be the way T.I.v13 runs. I am going to have to redo three quarters of that section just to get the mileage and destination to work out right. The Level B? Well, I hope to find a substitute for that. Stay tuned....... In the meantime, we were off to CP#1 and beyond. The next Level B was a completely new one to me, and should be perfectly fine for T.I.v13 no matter what the weather brings. That doesn't mean you wouldn't have to walk it, by the way. I wouldn't read too much into that.

You know that there will be big hills, but there will be "mind numbing flat sections" as well. 
Quick break on a Level B road........somewhere in Iowa.
Then it was on to the first section of the course to Checkpoint #2. This year, this will be the longest part of Trans Iowa. It's probably going to be about 155 miles or so. I was kind of worried how it would look, since, well......... I don't know, but flatter sections of the state might seem boring to some riders. I think that flatter sections serve the event by having their own set of difficulties both physical and mental. That said, I was mostly surprised and pleased with much of what we saw. This part will happen during the daytime, so seeing things will be a factor in this part of Trans Iowa. Trust me......there will be things to see! 

One of those times when we thought it was about to pour down rain, but it didn't.
 
Jeremy took a cemetery count, but I didn't get the final total we went by. 
We actually had a few nice surprises on the way to CP#2, and again, this shows you why you have to actually go out and do this recon stuff. We found Level B Roads that were not marked as such, even on the State DOT maps. (Department of Transportation maps, for anyone not familiar) In fact, we were kind of shocked, but in a good way. These fit the course well, not having potential flood concerns, that we can see, at any rate.

I also was pleased by a safer choice I made to cross a major highway, and another way to get folks across a separate one was deemed good enough. Then there were a couple of bummers as well. Places where pavement running out of towns went on a lot longer than I'd have liked to have seen it. I will be looking to make tweaks in these spots.

Tunnel vision
Yep .....that would be a Level B.
We looked at CP#2's location and I am stoked about how it sets and the possibilities for the event. Then it was on to the final leg of the course, which was heading back to Grinnell. Things were looking good and we had to stop to refuel the Truck With No Name. When I checked my watch I was dismayed. We had a lot of ground to cover and not a lot of time. I decided I was going to have to push the pace a bit in the truck.

One thing we found coming out of a town on route where there is a 24hr convenience store stop was a gravel road where I expected a city street. Now that was a change for once! Less pavement, bonus gravel! We'll take that!

A "bonus" Level B road that wasn't marked as such on the State DOT maps.
So now I was driving like a dirt short track racer. Hitting the brakes hard into a corner, coasting the apex, and mashing the gas out of the corner. Jeremy wasn't too fazed, but he did make a few snide comments about me being "all NASCAR" or something to that effect. It's all good! In the end, we got things covered that we needed to get covered. In fact, we even found a couple more "bonus Level B Roads" out there. I think we had five sections discovered that we did not expect. That's pretty cool since they were all decent, usable Level B's without concerns for water or what not.

Another unexpected Level B find. 
And another!
With the light fading, I had to make a decision about when to quit. I have been rather familiar with the routes near to Grinnell, and I decided to not recon the final 25 miles so we could concentrate on getting in what we hadn't been on before. By the way, I have laid eyes on the final run in several times this year alone. Fortunately, we were able to sneak all the recon in we wanted to, despite having a bit of difficulty verifying signage on several of the last corners we checked.

The weather cooperated and we didn't have to cut recon short! We even saw some blue sky. 
Final Thoughts: First of all, there are going to be a lot of changes and tweaks to this course. That said, I am pleased by what I saw. I think in the end it will provide an excellent experience for the riders. It will showcase a bit of Iowa that should leave a lasting impression on riders. I think the scenery in many spots is spectacular, and in others is very representative of Iowa. I will say that I was a bit dismayed by the amount of traffic and the lack of outward shows of friendliness by the natives we came to pass by on the route. That may be an anomaly due to several circumstances, but I am concerned about that.

I feel the route will provide a great challenge to the riders this time. It will all be dependent upon whatever the weather brings, of course, but the Level B's should play a part in the outcome, unless it is totally dry. There are hills, but again, there are some mind numbing, flat, boring parts that will test both mind and body in unique ways.

Stay tuned for updates on the course, mileages, and checkpoint cut off times. I cannot comment on any of that just yet as there are some serious tweaks to this course on the menu, and when they are completed, I can then give you all the details.

I finished up the day with 488 miles of driving in 14 hours. I used a tank and a half of gas, we stopped about seven times, and we covered all but the last 25 miles of the proposed course. Those might be tweaked as well due to construction in Grinnell. We weren't stopped by rain. That was amazing!

Okay, more soon, but for now, thank you for reading!

Trans Iowa v13: Recon Report

A sleepy Grinnell Iowa under sullen skies.
Let's see now, just how many of these missions have I been on? Too many to count. In some ways, they all start to look the same. Get up at "O-dark-thirty", get organized, hop in the truck, and for the fifth time, pick up Jeremy who does my recon with me nowadays. During the last several years, recon doesn't start without a visit to the Frontier Cafe in Grinnell. Good eats right there, and I highly recommend the place if you are ever down that way.

With that great food in the belly, we started reconning the course for the thirteenth Trans Iowa. Thirteen! I never would have guessed.......

So anyway, we got rolling, and it was with some trepidation too. The weather was weird. It looked as though it could break into a full on rain at any given time. In fact, it kept misting almost all the time in varying degrees. Sometimes it was barely enough to turn on the intermittent wipers for, and then at other times it was full on regular wiper speed and almost not cutting it at that. I think I about wore out the wiper switch Saturday!

The point was that with Level B Roads to look at, rain was going to make the recon very difficult and maybe we would have to cut things short. I was ready to give in should it do the rain thing since the Truck With No Name isn't exactly "mudder friendly", being a two wheel drive vehicle with highway tires and all. No need to try and be a hero when I might get stuck miles away from any services.

Rain was potentially only minutes away many times during the day, but it never developed beyond a heavy mist.
Well, despite all the reasons for bailing out that might happen, we were game to head out and so we did. Our initial leaving from Grinnell was a bit awkward due to road construction and missing navigation cues from Jeremy, who mistakenly thought I knew where I was going. He should know by now that I've always been a lost puppy!

Once out in the country we were headed out on the proposed course to checkpoint #1. It didn't take long to have a reminder of why it is that you have to physically go out and look with your own two eyes at your course. Any event director that doesn't actually lay there eyes on every mile of their proposed course is making a big mistake. We were initially really excited that we could drive onto the first Level B on the course. That was until we saw the following.......

Yeah...... This is the reason why I drove 488 miles Saturday. When you rely on maps and GPS tracks, they don't show you stuff like this.
A small, probably 20 yard long bridge was blockaded off and there was no way around it. Poof! There goes your course idea, as this was the only through road in the direction I wanted to go for 5-6 miles in either direction. Dang it!

Jeremy and I improvised a quick re-route, but it won't be the way T.I.v13 runs. I am going to have to redo three quarters of that section just to get the mileage and destination to work out right. The Level B? Well, I hope to find a substitute for that. Stay tuned....... In the meantime, we were off to CP#1 and beyond. The next Level B was a completely new one to me, and should be perfectly fine for T.I.v13 no matter what the weather brings. That doesn't mean you wouldn't have to walk it, by the way. I wouldn't read too much into that.

You know that there will be big hills, but there will be "mind numbing flat sections" as well. 
Quick break on a Level B road........somewhere in Iowa.
Then it was on to the first section of the course to Checkpoint #2. This year, this will be the longest part of Trans Iowa. It's probably going to be about 155 miles or so. I was kind of worried how it would look, since, well......... I don't know, but flatter sections of the state might seem boring to some riders. I think that flatter sections serve the event by having their own set of difficulties both physical and mental. That said, I was mostly surprised and pleased with much of what we saw. This part will happen during the daytime, so seeing things will be a factor in this part of Trans Iowa. Trust me......there will be things to see! 

One of those times when we thought it was about to pour down rain, but it didn't.
 
Jeremy took a cemetery count, but I didn't get the final total we went by. 
We actually had a few nice surprises on the way to CP#2, and again, this shows you why you have to actually go out and do this recon stuff. We found Level B Roads that were not marked as such, even on the State DOT maps. (Department of Transportation maps, for anyone not familiar) In fact, we were kind of shocked, but in a good way. These fit the course well, not having potential flood concerns, that we can see, at any rate.

I also was pleased by a safer choice I made to cross a major highway, and another way to get folks across a separate one was deemed good enough. Then there were a couple of bummers as well. Places where pavement running out of towns went on a lot longer than I'd have liked to have seen it. I will be looking to make tweaks in these spots.

Tunnel vision
Yep .....that would be a Level B.
We looked at CP#2's location and I am stoked about how it sets and the possibilities for the event. Then it was on to the final leg of the course, which was heading back to Grinnell. Things were looking good and we had to stop to refuel the Truck With No Name. When I checked my watch I was dismayed. We had a lot of ground to cover and not a lot of time. I decided I was going to have to push the pace a bit in the truck.

One thing we found coming out of a town on route where there is a 24hr convenience store stop was a gravel road where I expected a city street. Now that was a change for once! Less pavement, bonus gravel! We'll take that!

A "bonus" Level B road that wasn't marked as such on the State DOT maps.
So now I was driving like a dirt short track racer. Hitting the brakes hard into a corner, coasting the apex, and mashing the gas out of the corner. Jeremy wasn't too fazed, but he did make a few snide comments about me being "all NASCAR" or something to that effect. It's all good! In the end, we got things covered that we needed to get covered. In fact, we even found a couple more "bonus Level B Roads" out there. I think we had five sections discovered that we did not expect. That's pretty cool since they were all decent, usable Level B's without concerns for water or what not.

Another unexpected Level B find. 
And another!
With the light fading, I had to make a decision about when to quit. I have been rather familiar with the routes near to Grinnell, and I decided to not recon the final 25 miles so we could concentrate on getting in what we hadn't been on before. By the way, I have laid eyes on the final run in several times this year alone. Fortunately, we were able to sneak all the recon in we wanted to, despite having a bit of difficulty verifying signage on several of the last corners we checked.

The weather cooperated and we didn't have to cut recon short! We even saw some blue sky. 
Final Thoughts: First of all, there are going to be a lot of changes and tweaks to this course. That said, I am pleased by what I saw. I think in the end it will provide an excellent experience for the riders. It will showcase a bit of Iowa that should leave a lasting impression on riders. I think the scenery in many spots is spectacular, and in others is very representative of Iowa. I will say that I was a bit dismayed by the amount of traffic and the lack of outward shows of friendliness by the natives we came to pass by on the route. That may be an anomaly due to several circumstances, but I am concerned about that.

I feel the route will provide a great challenge to the riders this time. It will all be dependent upon whatever the weather brings, of course, but the Level B's should play a part in the outcome, unless it is totally dry. There are hills, but again, there are some mind numbing, flat, boring parts that will test both mind and body in unique ways.

Stay tuned for updates on the course, mileages, and checkpoint cut off times. I cannot comment on any of that just yet as there are some serious tweaks to this course on the menu, and when they are completed, I can then give you all the details.

I finished up the day with 488 miles of driving in 14 hours. I used a tank and a half of gas, we stopped about seven times, and we covered all but the last 25 miles of the proposed course. Those might be tweaked as well due to construction in Grinnell. We weren't stopped by rain. That was amazing!

Okay, more soon, but for now, thank you for reading!

Saturday, October 15, 2016

Minus Ten Review- 40 & 41

"29"er of the Show" for '06's I-Bike according to G-Ted
First of all, apologies for missing this post last week. I was kind of busy at a wedding, so there!

Anyway, ten years ago this week and last, things were really taking shape to be what they would be like for me for the next eight years. I was on a handshake deal with the founder of Twenty Nine Inches to write and review 29"ers and 29"er components, which he promised I would end up making money doing. He stated that I would work up to making more money doing this than I did at the bike shop.

Guess what? That never happened. So much for that guy's word!

Anyway, I saw this pictured Salsa Cycles Mamasita rig and I loved the look of it and the ideas seemed to be pretty radical. Salsa was in its earliest days of working on a hard tail design that would be compliant for the rider but stiff enough for racing. This all culminated in what they have today in the Warbird and Cutthroat models.

The other really crazy thing was what Salsa did to make the Mamasita handle with a snappy, 26"er-ish feel. They used a 73° head tube angle! And no.......it didn't really work. In fact, I had one short test ride on a Mamasita later on this same year and it put me off that bike and idea for good.

Badger Cycles "Dorothy" prototype.
The review job kicked off in a huge way with a couple of carbon fiber forks and other bikes, but the one bike review I got to do that had lasting impact on me was the Badger Dorothy review. Not because of the bike, per se', but because of the individual behind the bike, Ben.

I know that the mere mention of this whole tale of sorrow isn't anything Ben wants to remember, and I will not get into the ill-fated history of the project, but sometimes failures lead to better things, and I think that can definitely be said of Ben. As for me, I got to know Ben because of this project, and I can say that today he is a friend of mine. So, despite the bitterness of the whole Dorothy project, there was something really good that came out of it all, and I am glad that happened.

I will say that this bike was one of the best riding hard tails I ever threw a leg over. The Moots stem......not so much. But the rest of the bike was killer. I ended up taking the Moots stem off and putting a steel one on it which made a huge difference for the better. Come to think of it, this was the bike that cured me of ever wanting a titanium stem. Movement in some areas on a bicycle are not a welcome thing.

Minus Ten Review- 40 & 41

"29"er of the Show" for '06's I-Bike according to G-Ted
First of all, apologies for missing this post last week. I was kind of busy at a wedding, so there!

Anyway, ten years ago this week and last, things were really taking shape to be what they would be like for me for the next eight years. I was on a handshake deal with the founder of Twenty Nine Inches to write and review 29"ers and 29"er components, which he promised I would end up making money doing. He stated that I would work up to making more money doing this than I did at the bike shop.

Guess what? That never happened. So much for that guy's word!

Anyway, I saw this pictured Salsa Cycles Mamasita rig and I loved the look of it and the ideas seemed to be pretty radical. Salsa was in its earliest days of working on a hard tail design that would be compliant for the rider but stiff enough for racing. This all culminated in what they have today in the Warbird and Cutthroat models.

The other really crazy thing was what Salsa did to make the Mamasita handle with a snappy, 26"er-ish feel. They used a 73° head tube angle! And no.......it didn't really work. In fact, I had one short test ride on a Mamasita later on this same year and it put me off that bike and idea for good.

Badger Cycles "Dorothy" prototype.
The review job kicked off in a huge way with a couple of carbon fiber forks and other bikes, but the one bike review I got to do that had lasting impact on me was the Badger Dorothy review. Not because of the bike, per se', but because of the individual behind the bike, Ben.

I know that the mere mention of this whole tale of sorrow isn't anything Ben wants to remember, and I will not get into the ill-fated history of the project, but sometimes failures lead to better things, and I think that can definitely be said of Ben. As for me, I got to know Ben because of this project, and I can say that today he is a friend of mine. So, despite the bitterness of the whole Dorothy project, there was something really good that came out of it all, and I am glad that happened.

I will say that this bike was one of the best riding hard tails I ever threw a leg over. The Moots stem......not so much. But the rest of the bike was killer. I ended up taking the Moots stem off and putting a steel one on it which made a huge difference for the better. Come to think of it, this was the bike that cured me of ever wanting a titanium stem. Movement in some areas on a bicycle are not a welcome thing.

Friday, October 14, 2016

Friday News And Views

Not a Pugs, but perhaps what the Pugs should have evolved into.
Tumbleweed Prospector:

I cannot recall when it was that I came across the Tumbleweed Bicycle Company, but it was months ago, and I remember thinking that this bike that they were working on was exactly what the Surly Pugsley should have morphed into. The steel fat bike idea with versatility built in and made to work with "standard" components, even more so than an original Pugsley.

There are several really cool features of the frame, one of which is that, like the original Pugs, you can swap the front and rear wheels out. So, if you ran a Rohloff in back, you could run a single speed hub up front, in case something went pear shaped with the Rohloff. Or you could run two different single speed ratios, or other configurations as well.

Then there is the bottom bracket. One of the things that even the OG Pugs does is that it forces your feet wider apart than typical bicycles do. This is sometimes referred to as the "Q" factor. Anyway, 100mm bottom brackets don't work for some folks, so they cannot enjoy fat bikes. This Prospector has a 73mm bottom bracket, like many mountain bikes do, so the cranks are "normal" and this allows for more folks to get on a fat bike that otherwise wouldn't.

This is the special bottom bracket yoke which allows for a 73mm BB to be used on the Prospector.
That is a brilliant idea, and the specially made yoke that gets everything to work out- drive train, cranks, tires- was designed by Anna Schwinn. She's a really bright bicycle person that has done some really good work on All City, Foundry, Zipp, and other bicycle company's stuff. In fact, she also designed the drop outs for the Prospector. Cool.

Anyway, if I didn't already have way too many bikes, this Prospector and I would be searching for gold in the hills. It's a cool bike with great features and multiple wheel size capabilities. Check it out sometime.

My daughter says it looks like something from Dr. Who.
WTB Galaxy Saddle Limited Edition To Support Buddy Newman Scholarship Fund:

Sometimes really cool people leave this orb way too soon. This must have been the case with a guy named Buddy Newman who worked his magic for WTB. So, in a way to memorialize and honor this fellow, WTB is offering this Team Volt "Galaxy" custom saddle, with graphics designed by Buddy Newman, and is using the proceeds of the sale of this saddle to support the high school mtb team Buddy was on in his days in high school.

"The WTB Galaxy saddle is a Team-level Volt saddle, features titanium rails and DNA Padding, and is available in a limited quantity of 135mm width. Now available for purchase through WTB’s online store for a retail price of $129.95, the Galaxy saddle mirrors the MSRP of a non-custom WTB Volt Team saddle. Proceeds from sales of the Galaxy saddle will pay for racing fees for the Nevada Union Miners mountain bike team."

 Check one out if you are in need of a cool saddle for your bicycle, or heck.....put it up as part of your own Dr. Who shrine!

Registration Update:

With the course recon happening tomorrow I thought I would give an update on the registration now. Going back to the Current Winners and "Plus Six' riders, we did not get 25 slots filled. We got only got 14 in. So we had 11 spots get kicked down to the Veterans registration. That boosted their limit to 66 riders.

Well, with today and tomorrow left to receive cards yet, we have only reached 37 entrants in the Vets category. I would seriously be surprised if we receive 29 cards in total between today and tomorrow, but you never know. At the rate they have been coming in, I would venture a guess that we will not be having a lottery drawing for the Vets class Sunday. Maybe I am wrong, but maybe not. If I am right, all the Vets that I have received properly filled out cards from will transfer in. Any left over, unclaimed Vet spots would then get kicked into the Rookie pool.

If I get even one card over 29 between now and Saturday afternoon, there will be a lottery drawing. I will have to determine the format depending on how far over the 66 rider limit we go, because if we only go over by one or two, I will just draw out one or two names to reduce the pile to 66. I think that makes more sense than the other way. However; if I miraculously get 10 or more over the 66 rider limit, then there will be a full on, traditional drawing of names. Okay?

I suspect recon will take me till early evening or maybe later Saturday, so the determination of how this gets done may not be made until as late as Sunday afternoon. Either way, the Vets will be locked in, one way or the other, by Sunday evening and the Rookie cards will start coming in Monday through till two weeks from this Saturday. Then, on October 31st, it will all be over when the Rookie Lottery drawing takes place.

Have a great weekend, y'all!

Friday News And Views

Not a Pugs, but perhaps what the Pugs should have evolved into.
Tumbleweed Prospector:

I cannot recall when it was that I came across the Tumbleweed Bicycle Company, but it was months ago, and I remember thinking that this bike that they were working on was exactly what the Surly Pugsley should have morphed into. The steel fat bike idea with versatility built in and made to work with "standard" components, even more so than an original Pugsley.

There are several really cool features of the frame, one of which is that, like the original Pugs, you can swap the front and rear wheels out. So, if you ran a Rohloff in back, you could run a single speed hub up front, in case something went pear shaped with the Rohloff. Or you could run two different single speed ratios, or other configurations as well.

Then there is the bottom bracket. One of the things that even the OG Pugs does is that it forces your feet wider apart than typical bicycles do. This is sometimes referred to as the "Q" factor. Anyway, 100mm bottom brackets don't work for some folks, so they cannot enjoy fat bikes. This Prospector has a 73mm bottom bracket, like many mountain bikes do, so the cranks are "normal" and this allows for more folks to get on a fat bike that otherwise wouldn't.

This is the special bottom bracket yoke which allows for a 73mm BB to be used on the Prospector.
That is a brilliant idea, and the specially made yoke that gets everything to work out- drive train, cranks, tires- was designed by Anna Schwinn. She's a really bright bicycle person that has done some really good work on All City, Foundry, Zipp, and other bicycle company's stuff. In fact, she also designed the drop outs for the Prospector. Cool.

Anyway, if I didn't already have way too many bikes, this Prospector and I would be searching for gold in the hills. It's a cool bike with great features and multiple wheel size capabilities. Check it out sometime.

My daughter says it looks like something from Dr. Who.
WTB Galaxy Saddle Limited Edition To Support Buddy Newman Scholarship Fund:

Sometimes really cool people leave this orb way too soon. This must have been the case with a guy named Buddy Newman who worked his magic for WTB. So, in a way to memorialize and honor this fellow, WTB is offering this Team Volt "Galaxy" custom saddle, with graphics designed by Buddy Newman, and is using the proceeds of the sale of this saddle to support the high school mtb team Buddy was on in his days in high school.

"The WTB Galaxy saddle is a Team-level Volt saddle, features titanium rails and DNA Padding, and is available in a limited quantity of 135mm width. Now available for purchase through WTB’s online store for a retail price of $129.95, the Galaxy saddle mirrors the MSRP of a non-custom WTB Volt Team saddle. Proceeds from sales of the Galaxy saddle will pay for racing fees for the Nevada Union Miners mountain bike team."

 Check one out if you are in need of a cool saddle for your bicycle, or heck.....put it up as part of your own Dr. Who shrine!

Registration Update:

With the course recon happening tomorrow I thought I would give an update on the registration now. Going back to the Current Winners and "Plus Six' riders, we did not get 25 slots filled. We got only got 14 in. So we had 11 spots get kicked down to the Veterans registration. That boosted their limit to 66 riders.

Well, with today and tomorrow left to receive cards yet, we have only reached 37 entrants in the Vets category. I would seriously be surprised if we receive 29 cards in total between today and tomorrow, but you never know. At the rate they have been coming in, I would venture a guess that we will not be having a lottery drawing for the Vets class Sunday. Maybe I am wrong, but maybe not. If I am right, all the Vets that I have received properly filled out cards from will transfer in. Any left over, unclaimed Vet spots would then get kicked into the Rookie pool.

If I get even one card over 29 between now and Saturday afternoon, there will be a lottery drawing. I will have to determine the format depending on how far over the 66 rider limit we go, because if we only go over by one or two, I will just draw out one or two names to reduce the pile to 66. I think that makes more sense than the other way. However; if I miraculously get 10 or more over the 66 rider limit, then there will be a full on, traditional drawing of names. Okay?

I suspect recon will take me till early evening or maybe later Saturday, so the determination of how this gets done may not be made until as late as Sunday afternoon. Either way, the Vets will be locked in, one way or the other, by Sunday evening and the Rookie cards will start coming in Monday through till two weeks from this Saturday. Then, on October 31st, it will all be over when the Rookie Lottery drawing takes place.

Have a great weekend, y'all!

Thursday, October 13, 2016

A Sense Of Urgency

New tires to test with time running out.....
Yesterday it kind of struck me, somewhat like a cold slap in the face, because....well, it was! Cold that is. Thirty degrees colder than the day before with cold rain in the forenoon and gusty winds out of the Northwest all day. So, why all the urgency?

Because Fall is halfway over with, and Winter isn't far off. Consider that Thanksgiving is only six weeks away. Generally speaking, in a "normal" year, that's about the end of clear roads and trails, since snow usually comes to clog things up around then. So, the way I figure it, I've got six weeks to get a lot of stuff squared away for the year.

Maybe the weather will be sort of kind, like last year when I rode right up to Christmas time on the gravel roads, but I ain't bettin' on that. Nope. No way. I have to get a few reviews done, and if I am real lucky, I'll squeeze out that Cup-O-Dirt challenge requirement before the weather shuts me down. Trouble is, I have other duties to consider that also demand my time.....right now. Mainly they all are related to Trans Iowa. I have the recon Saturday, the lottery drawing Sunday, (if I get a bunch more cards, which looks less likely now), and then the last registration for the Rookies to keep track of and have a lottery for, (possibly), by the end of this month.

Yesterday I spent four hours locking down the first two thirds of the course for Trans Iowa and I still have to write mock cues and do the tail end of the route before Saturday. So, that all means that all of this riding stuff gets pushed aside to make way to get more of that done as well. Oh yeah.....did I mention that there may be a big ride at the end of the month? No? Well, things seem up in the air concerning that but I've been assured that is happening. When I know more than that, I can say something, but that's all I know. Vague, yes, but it is what it is.

Anyway, suffice it to say that I feel my feet over the fire and I've got a lot to get crackin' on before the hourglass drains the last grain of sand to the bottom.

A Sense Of Urgency

New tires to test with time running out.....
Yesterday it kind of struck me, somewhat like a cold slap in the face, because....well, it was! Cold that is. Thirty degrees colder than the day before with cold rain in the forenoon and gusty winds out of the Northwest all day. So, why all the urgency?

Because Fall is halfway over with, and Winter isn't far off. Consider that Thanksgiving is only six weeks away. Generally speaking, in a "normal" year, that's about the end of clear roads and trails, since snow usually comes to clog things up around then. So, the way I figure it, I've got six weeks to get a lot of stuff squared away for the year.

Maybe the weather will be sort of kind, like last year when I rode right up to Christmas time on the gravel roads, but I ain't bettin' on that. Nope. No way. I have to get a few reviews done, and if I am real lucky, I'll squeeze out that Cup-O-Dirt challenge requirement before the weather shuts me down. Trouble is, I have other duties to consider that also demand my time.....right now. Mainly they all are related to Trans Iowa. I have the recon Saturday, the lottery drawing Sunday, (if I get a bunch more cards, which looks less likely now), and then the last registration for the Rookies to keep track of and have a lottery for, (possibly), by the end of this month.

Yesterday I spent four hours locking down the first two thirds of the course for Trans Iowa and I still have to write mock cues and do the tail end of the route before Saturday. So, that all means that all of this riding stuff gets pushed aside to make way to get more of that done as well. Oh yeah.....did I mention that there may be a big ride at the end of the month? No? Well, things seem up in the air concerning that but I've been assured that is happening. When I know more than that, I can say something, but that's all I know. Vague, yes, but it is what it is.

Anyway, suffice it to say that I feel my feet over the fire and I've got a lot to get crackin' on before the hourglass drains the last grain of sand to the bottom.

Wednesday, October 12, 2016

The Prodigal Fork Comes Home

Beaten, bruised, and battered. The On One Inbred fork.
If you've been keeping up with my "Minus Ten Review" posts, you've likely seen how my old On One Inbred came together and was used at the first Dirty Kanza 200 event. That was ten years ago now. I used that bike pretty regularly until 2008-ish or so, when I parked it due to having other bikes and review duties. It may have been about that time that I sold the bike to my then co-worker at the shop, Craig.

I do know that Craig rode the Inbred on the Guitar Ted Death Ride invitational of 2009, so it must have been right before then that I sold him that bike. He rode it for a while, then he left our shop and went to Ames, and that's when I lost track of the old Inbred up until a couple years or so ago. Craig let me know in a text that his brother was riding the bike then. I told him that I wanted first dibs if it ever came up for sale again. I really liked the ride feel of that bike.

Well, the frame came back to me very unexpectedly last May. (Story here) I was super grateful for that. The thing was that I did not have the original fork, and ironically enough, the carbon fork that I ended up putting on this Inbred was sold to another co-worker just a bit earlier in the year. Analysis paralysis then set in and I ended up stashing the thing down in the Lab until a time that I would have a clearer mind about what to do with the bike.

So, that was that. I occasionally would think of a few ideas for that build, but which fork I would use was always the hang up. Well, that and a head set, which I have, but I always think I need an anodized Chris King or something for a head set, which kind of puts a damper on my build process.

That's me riding the Inbred at the first DK200: Image by Joel Dyke
So, anyway, what happens but Craig walks into the shop not long ago and hands me this battered, scratched up, rusty steel fork. It was the original Inbred fork! Craig told me that it ended up with a guy out in Colorado and Craig had asked that when he was finished with it maybe he could give it back to Craig. Well, the guy did, Craig generously gave it back to me, and well..... I guess I'd better get something done with this thing now! 

The thing is, the fork has been used to such a degree that the powder coating is gone in several spots. This thing needs a good refinishing. Well, if I have to get the fork powder coated, maybe I should do the whole dang thing. So, more decisions and maybe more delaying. I don't know.....

I am thinking this will end up becoming a single speed again, like it was in the beginning. I may end up putting a drop bar on it, but that isn't a given. At any rate, the bottom line is that now I'll need to do something with the rigid steel fork, at the least, and I may end up doing something completely silly in the interim, like putting a suspension device on it. I happen to have one that would be a good fit, so why not? It would get this up and running faster than it might if I hold up and powder coat this fork or the whole frame.

I do happen to like purple.........

The Prodigal Fork Comes Home

Beaten, bruised, and battered. The On One Inbred fork.
If you've been keeping up with my "Minus Ten Review" posts, you've likely seen how my old On One Inbred came together and was used at the first Dirty Kanza 200 event. That was ten years ago now. I used that bike pretty regularly until 2008-ish or so, when I parked it due to having other bikes and review duties. It may have been about that time that I sold the bike to my then co-worker at the shop, Craig.

I do know that Craig rode the Inbred on the Guitar Ted Death Ride invitational of 2009, so it must have been right before then that I sold him that bike. He rode it for a while, then he left our shop and went to Ames, and that's when I lost track of the old Inbred up until a couple years or so ago. Craig let me know in a text that his brother was riding the bike then. I told him that I wanted first dibs if it ever came up for sale again. I really liked the ride feel of that bike.

Well, the frame came back to me very unexpectedly last May. (Story here) I was super grateful for that. The thing was that I did not have the original fork, and ironically enough, the carbon fork that I ended up putting on this Inbred was sold to another co-worker just a bit earlier in the year. Analysis paralysis then set in and I ended up stashing the thing down in the Lab until a time that I would have a clearer mind about what to do with the bike.

So, that was that. I occasionally would think of a few ideas for that build, but which fork I would use was always the hang up. Well, that and a head set, which I have, but I always think I need an anodized Chris King or something for a head set, which kind of puts a damper on my build process.

That's me riding the Inbred at the first DK200: Image by Joel Dyke
So, anyway, what happens but Craig walks into the shop not long ago and hands me this battered, scratched up, rusty steel fork. It was the original Inbred fork! Craig told me that it ended up with a guy out in Colorado and Craig had asked that when he was finished with it maybe he could give it back to Craig. Well, the guy did, Craig generously gave it back to me, and well..... I guess I'd better get something done with this thing now! 

The thing is, the fork has been used to such a degree that the powder coating is gone in several spots. This thing needs a good refinishing. Well, if I have to get the fork powder coated, maybe I should do the whole dang thing. So, more decisions and maybe more delaying. I don't know.....

I am thinking this will end up becoming a single speed again, like it was in the beginning. I may end up putting a drop bar on it, but that isn't a given. At any rate, the bottom line is that now I'll need to do something with the rigid steel fork, at the least, and I may end up doing something completely silly in the interim, like putting a suspension device on it. I happen to have one that would be a good fit, so why not? It would get this up and running faster than it might if I hold up and powder coat this fork or the whole frame.

I do happen to like purple.........

Tuesday, October 11, 2016

SRAM NX-1: Impressions

Post Fat Bike Century condition.
NOTE: Large doses of "my opinion" will be handed out in gloppy dollops today. You've been forewarned.....

As many of you know, I have installed the SRAM NX-1 drive train and shifter on my Ti Mukluk. Recently it was flogged on my 100 mile Fat Bike Century ride on gravel roads. This is not a "final verdict" on these parts as I still want to see how the group fares through a Winter's worth of use, but this is a first impression of the group and how it performs for me.

I did do a few shorter rides to break in and fine tune the system before I did my century ride. It didn't take much, since there is only one derailleur, to get tuned into primo performance status. There is a barrel adjuster located at the exit point of the cable from the shifter pod, so adjusting this derailleur on the fly is possible as well, should you need to do that.

The conditions on the ride varied from wet, gritty gravel to dry and pretty dusty. So this was a good test of the system in those specific adverse conditions. There was a tiny bit of rough single track at the very end of the ride so I did get a taste of how stable the system is as well, but otherwise it was all gravel roads with a tiny bit of pavement thrown in.

The heart of the system is undoubtedly the rear derailleur and cassette.
Shifting Performance: I used a non-SRAM chain on this build because I do not trust the longevity of a SRAM 10 or 11 speed chain versus the competition. That said, I saw no compromise in shifting performance versus 1 x 11 systems using SRAM chains I have worked on at the shop. Other than this, the system was all SRAM with the Surly, SRAM approved X-Sync stainless steel chain ring. I've used a higher end SRAM 1X11 system before and this NX stuff is not as fast, nor as crisp shifting in the field as the upper end 1X11 SRAM components. That said, it isn't bad. Just not super snappy or fast. It gets the shifts though, and so if you are not racing, this is still a worthy system. Oh......and far less expensive. 

Under pressure the NX-1 still shifts but the slower nature of the system is amplified over the higher end stuff which still will snap off the shift with a high pitched zing! sound from the chain. This NX stuff doesn't do that, and it is obvious that the shift is a bit laborious. I believe it is because the NX derailleur is not as stiff as the higher end XX-1 and the like. The shifter is really smooth, by the way. The trigger action is easy to initiate and is typical SRAM in an ergonomic sense. Whether that is good or bad is a personal preference issue.

The X-Sync style, SRAM approved 28T Surly ring
Drive Train Stability: While this doesn't cover uses such as rough, rocky single track, or big jumps and moves, I can say that the drive train seems quite stable. As stated, I did have some bumpy single track near the end of my ride and there was nothing negative to report concerning the drive train. So for now, all I can say is that it doesn't seem as though chain drops will be an issue.

I will say that the chain line seems biased toward the higher/smaller cog side of the cassette more. Getting up into the lower gears puts the chain at more of a severe angle, and the lowest two cogs show significantly slower shifting as a result. I blame this on the OD crank set and its offset chain ring mounting scheme in combination with the longer bottom bracket of the Mukluk. Surly says the inner ring mounting position of the OD crank is supposed to be where the middle ring would be on a triple, but it clearly is not lined up with the middle of the NX-1 cassette.

Gearing range for a gravel century on our course called for the fastest cogs to be employed vs the big, low gears.
Gearing Range: Everyone is going to have different needs concerning the gearing range of a 1X11 set up, so this is strictly my opinion based upon my experience and needs. That said, there may be some kernels of knowledge here that you could use.

Clearly, I think it can be agreed that I am not going to be doing big gravel miles a lot with this bike. Maybe I won't ever again, since that is not what I have this bike for. The point is, I could do a gravel century with this gearing set up, and I did. Yes- I was in the smallest four or five cogs almost all day. I did reach into some of those big daddy cogs on the cassette when we traversed the Iowa River Valley, but that was it for low gearing needs.

Now this brings up a simple point. Say that I had the "proper" SRAM NX crank or lets say I had an X-1 type with the removable spider. I could swap rings for a ride like the Fat Bike Century or for an appropriate low cog for a trail breaking fat bike ride. That would "only" require some mechanical work when I wanted to switch up. But......

Again, taking a look at this from a different perspective, let's say that the 1X system existed first. There were no front derailleurs ever before this. Then some whiz-bang company comes up with this idea to mount two rings on a crank set and a chain moving mechanism so you could have a choice. Yeah! Now I don't have to chose a ring before a ride, or be caught out on a ride where I wished I had a bigger or smaller cog for a certain section. Now, wouldn't that be an advantage? 

 So, 1X may be the latest fashion darling of the media and SRAM in particular, but that front derailleur idea is far from dead folks. Furthermore, it is, hands down, a better idea for many. Had I been running the former 2X10 set up I had before, in proper tuned up shape, it would have made for a smarter choice for the Fat Bike Century.

Conclusions: The NX-1 is simpler than a triple to figure out and likely lighter than many double ring set ups. It shifts reasonably well, but it is nothing like the upper end SRAM offerings in 1X11 or 1X12 when it comes to precision and speed. I don't know about longevity yet, but these cogs are stamped steel and the main drive ring is stainless steel, so I am hoping for a Winter's worth of use out of it at the least.

When it comes to details the NX-1 is perhaps a bit suspect. The chain line is going to be compromised more at the extremes due to the larger rear cogs and that even if you get the drive ring in line with the cassette's center cog. The drive ring is going to be a compromise in terms of range and where you end up on the cassette. With a double or triple you can use the Keith Bontrager Rules for shifting and eek out the best possible combination for efficiency and shifting performance. However; that means the rider would have to actually think and use the equipment with skill.

Maybe that's asking too much in these days of ADD folks and innergoogles gaming. Anyway.......

I think NX-1 is the more reasonable choice for 1X11 since you do not have to get a different cassette driver than you already may have, nor is it prohibitively expensive to buy and maintain. Plus, with Shimano doing 1X11 cassettes with wider gearing ranges, the possibility exists to get into a better quality cassette and likely better shifting performance. Basically, there is an upgrade path that doesn't require a new rear free hub and/or a rear wheel. Obviously, a new rear derailleur upgrade path can be had as well. So, for starting out in the 1X11 world, I think NX-1 is really a great option. Just know that if you get into higher end componentry, you will probably not want to return to NX-1 again.

I'll have a long term update on these parts most likely at the end of this coming Winter.

Note- I bought the NX-1 cassette, shifter, and rear derailleur with my own damn money, and that goes for the Surly drive ring and the chain as well. I was not paid nor bribed for this post. So there.......

SRAM NX-1: Impressions

Post Fat Bike Century condition.
NOTE: Large doses of "my opinion" will be handed out in gloppy dollops today. You've been forewarned.....

As many of you know, I have installed the SRAM NX-1 drive train and shifter on my Ti Mukluk. Recently it was flogged on my 100 mile Fat Bike Century ride on gravel roads. This is not a "final verdict" on these parts as I still want to see how the group fares through a Winter's worth of use, but this is a first impression of the group and how it performs for me.

I did do a few shorter rides to break in and fine tune the system before I did my century ride. It didn't take much, since there is only one derailleur, to get tuned into primo performance status. There is a barrel adjuster located at the exit point of the cable from the shifter pod, so adjusting this derailleur on the fly is possible as well, should you need to do that.

The conditions on the ride varied from wet, gritty gravel to dry and pretty dusty. So this was a good test of the system in those specific adverse conditions. There was a tiny bit of rough single track at the very end of the ride so I did get a taste of how stable the system is as well, but otherwise it was all gravel roads with a tiny bit of pavement thrown in.

The heart of the system is undoubtedly the rear derailleur and cassette.
Shifting Performance: I used a non-SRAM chain on this build because I do not trust the longevity of a SRAM 10 or 11 speed chain versus the competition. That said, I saw no compromise in shifting performance versus 1 x 11 systems using SRAM chains I have worked on at the shop. Other than this, the system was all SRAM with the Surly, SRAM approved X-Sync stainless steel chain ring. I've used a higher end SRAM 1X11 system before and this NX stuff is not as fast, nor as crisp shifting in the field as the upper end 1X11 SRAM components. That said, it isn't bad. Just not super snappy or fast. It gets the shifts though, and so if you are not racing, this is still a worthy system. Oh......and far less expensive. 

Under pressure the NX-1 still shifts but the slower nature of the system is amplified over the higher end stuff which still will snap off the shift with a high pitched zing! sound from the chain. This NX stuff doesn't do that, and it is obvious that the shift is a bit laborious. I believe it is because the NX derailleur is not as stiff as the higher end XX-1 and the like. The shifter is really smooth, by the way. The trigger action is easy to initiate and is typical SRAM in an ergonomic sense. Whether that is good or bad is a personal preference issue.

The X-Sync style, SRAM approved 28T Surly ring
Drive Train Stability: While this doesn't cover uses such as rough, rocky single track, or big jumps and moves, I can say that the drive train seems quite stable. As stated, I did have some bumpy single track near the end of my ride and there was nothing negative to report concerning the drive train. So for now, all I can say is that it doesn't seem as though chain drops will be an issue.

I will say that the chain line seems biased toward the higher/smaller cog side of the cassette more. Getting up into the lower gears puts the chain at more of a severe angle, and the lowest two cogs show significantly slower shifting as a result. I blame this on the OD crank set and its offset chain ring mounting scheme in combination with the longer bottom bracket of the Mukluk. Surly says the inner ring mounting position of the OD crank is supposed to be where the middle ring would be on a triple, but it clearly is not lined up with the middle of the NX-1 cassette.

Gearing range for a gravel century on our course called for the fastest cogs to be employed vs the big, low gears.
Gearing Range: Everyone is going to have different needs concerning the gearing range of a 1X11 set up, so this is strictly my opinion based upon my experience and needs. That said, there may be some kernels of knowledge here that you could use.

Clearly, I think it can be agreed that I am not going to be doing big gravel miles a lot with this bike. Maybe I won't ever again, since that is not what I have this bike for. The point is, I could do a gravel century with this gearing set up, and I did. Yes- I was in the smallest four or five cogs almost all day. I did reach into some of those big daddy cogs on the cassette when we traversed the Iowa River Valley, but that was it for low gearing needs.

Now this brings up a simple point. Say that I had the "proper" SRAM NX crank or lets say I had an X-1 type with the removable spider. I could swap rings for a ride like the Fat Bike Century or for an appropriate low cog for a trail breaking fat bike ride. That would "only" require some mechanical work when I wanted to switch up. But......

Again, taking a look at this from a different perspective, let's say that the 1X system existed first. There were no front derailleurs ever before this. Then some whiz-bang company comes up with this idea to mount two rings on a crank set and a chain moving mechanism so you could have a choice. Yeah! Now I don't have to chose a ring before a ride, or be caught out on a ride where I wished I had a bigger or smaller cog for a certain section. Now, wouldn't that be an advantage? 

 So, 1X may be the latest fashion darling of the media and SRAM in particular, but that front derailleur idea is far from dead folks. Furthermore, it is, hands down, a better idea for many. Had I been running the former 2X10 set up I had before, in proper tuned up shape, it would have made for a smarter choice for the Fat Bike Century.

Conclusions: The NX-1 is simpler than a triple to figure out and likely lighter than many double ring set ups. It shifts reasonably well, but it is nothing like the upper end SRAM offerings in 1X11 or 1X12 when it comes to precision and speed. I don't know about longevity yet, but these cogs are stamped steel and the main drive ring is stainless steel, so I am hoping for a Winter's worth of use out of it at the least.

When it comes to details the NX-1 is perhaps a bit suspect. The chain line is going to be compromised more at the extremes due to the larger rear cogs and that even if you get the drive ring in line with the cassette's center cog. The drive ring is going to be a compromise in terms of range and where you end up on the cassette. With a double or triple you can use the Keith Bontrager Rules for shifting and eek out the best possible combination for efficiency and shifting performance. However; that means the rider would have to actually think and use the equipment with skill.

Maybe that's asking too much in these days of ADD folks and innergoogles gaming. Anyway.......

I think NX-1 is the more reasonable choice for 1X11 since you do not have to get a different cassette driver than you already may have, nor is it prohibitively expensive to buy and maintain. Plus, with Shimano doing 1X11 cassettes with wider gearing ranges, the possibility exists to get into a better quality cassette and likely better shifting performance. Basically, there is an upgrade path that doesn't require a new rear free hub and/or a rear wheel. Obviously, a new rear derailleur upgrade path can be had as well. So, for starting out in the 1X11 world, I think NX-1 is really a great option. Just know that if you get into higher end componentry, you will probably not want to return to NX-1 again.

I'll have a long term update on these parts most likely at the end of this coming Winter.

Note- I bought the NX-1 cassette, shifter, and rear derailleur with my own damn money, and that goes for the Surly drive ring and the chain as well. I was not paid nor bribed for this post. So there.......