Thursday, March 09, 2023

Singular Cycles Gryphon Mk3 Build: Update 1

The Mk3 Gryphon has some nice hardware on the frame.
If you missed the introduction to this frame set, you can check back on Tuesday's post HERE. I'll trust y'all read that and won't need to ask questions answered there. 

As I progressed on the build I was anxious to find my flat mount brake calipers. I was pretty sure I had a set. But as things go with me, I squirreled them away for safe keeping, somewhere. You know, when you put something away that, at the time seemed obvious, but weeks later you can't remember what was once obvious. 

Well, that's me, and if you ever knew the rambling mess that is my workspace, you'd understand. I have waaaaay too much stuff here in a small space. So I regularly find myself looking for stuff. No big deal. But these calipers are not a 4mm bolt. They should be fairly easily found, but I could not find them! 

I ended up searching on two different occasions and finally found them in the third box of brake stuff I have. (Told ya I have way too much stuff!) Anyway, I knew I had them because they were take-offs from the Twin Six Standard Rando when I swapped out the single speed set up for the hydraulic GRX Limited group last Summer.

The lost has been found

This leads me to a mini-rant about flat mount brakes. Now, I don't mind how they work, and they are not really all that hard to work on, but as a mechanic when you see how many different frames and forks there are, you realize that the "one size fits all" brake bolt hardware doesn't always work.

Let's compare brake caliper mounting bolts with through axle wheel bolts. The through axle wheel bolts are not sold with the wheels. Why? Because frames differ enough that there is a need for different through axle bolts in length and thread pitch. So, the brilliant (and I mean this sincerely) call was made to sell the axles with the frames, not with the wheels. Why don't we do this with flat mount brake caliper mounting bolts? 

I have three bikes now where I have had to either shim the bolts or outright find replacements for them because the stock bolts are not the right length. See? Sell the brake caliper mounting bolts with the frames! Oh! And by the way, this was never an issue with the IS standard disc caliper mounts from the 2000's. And yes- this Singular frame needed different bolts to mount the calipers on both ends. 

The semi-floating replaceable rear drop out. Singular actually sent two. Nice!
 

The Gryphon Mk3 also came with this through axle compatible breakaway rear derailleur mount that is "semi-floating". This means that the hangar doesn't become rigid with the frame when you bolt it on with the single 3mm hex head bolt. That bolt, (it is a special shouldered bolt), has a stop built into it that keeps you from tightening up the hangar until it cannot move. The theory being here that the through axle will thread into the hangar and automatically align the wheel with the derailleur you bolt to the hangar, assuming, of course, that your derailleur is not bent. This eliminates having to tweak the hangar because the frame is slightly out of spec. Nice. 

But what is nicer is that Singular sent two hangars! So, I have one in hand just in case, which is a nice touch. I've always thought all bicycles with these breakaway hangars should come with a spare. It just makes sense.

An older Velo Orange "Grand Cru" head set.

Part of the plan was to utilize as much silver/polished aluminum stuff that I could on this build to bring a bit of "class" to the overall look. Singular Cycles' Sam Alison has always had an eye for more classic lines (Peregrine, Kite) and classic or understated paint schemes which lend themselves to classic build aesthetics. I wanted to honor Sam's sensibilities with this build and honestly, I like that look as well. 

Teravail 29" X 2.8 Coronado skin wall tires will complete the look.

The wheels were a question mark coming into this build as well, but because everything pointed toward the 3X9 set up I am pursuing now, I chose the Project Wide Gravel Wheels v2 for this build. 

These wheels have black rims and hubs with half the spokes being black and the other half silver. I use that pattern as a way to designate the wheels as something I built. Kind of "my signature wheel build", if you will. 

Those wheel also have an XD driver on the rear for a free hub. I just ordered a Shimano HG free hub to swap that out on the DT Swiss 350 hub. 

When that shows up I will get things on the final track to the finish line on this build and I will be able to show it all off. But before that, I'll have one more post showing the cockpit choices and the shifters I am using for the build. 

Stay tuned for that post coming soon!

Singular Cycles Gryphon Mk3 Build: Update 1

The Mk3 Gryphon has some nice hardware on the frame.
If you missed the introduction to this frame set, you can check back on Tuesday's post HERE. I'll trust y'all read that and won't need to ask questions answered there. 

As I progressed on the build I was anxious to find my flat mount brake calipers. I was pretty sure I had a set. But as things go with me, I squirreled them away for safe keeping, somewhere. You know, when you put something away that, at the time seemed obvious, but weeks later you can't remember what was once obvious. 

Well, that's me, and if you ever knew the rambling mess that is my workspace, you'd understand. I have waaaaay too much stuff here in a small space. So I regularly find myself looking for stuff. No big deal. But these calipers are not a 4mm bolt. They should be fairly easily found, but I could not find them! 

I ended up searching on two different occasions and finally found them in the third box of brake stuff I have. (Told ya I have way too much stuff!) Anyway, I knew I had them because they were take-offs from the Twin Six Standard Rando when I swapped out the single speed set up for the hydraulic GRX Limited group last Summer.

The lost has been found

This leads me to a mini-rant about flat mount brakes. Now, I don't mind how they work, and they are not really all that hard to work on, but as a mechanic when you see how many different frames and forks there are, you realize that the "one size fits all" brake bolt hardware doesn't always work.

Let's compare brake caliper mounting bolts with through axle wheel bolts. The through axle wheel bolts are not sold with the wheels. Why? Because frames differ enough that there is a need for different through axle bolts in length and thread pitch. So, the brilliant (and I mean this sincerely) call was made to sell the axles with the frames, not with the wheels. Why don't we do this with flat mount brake caliper mounting bolts? 

I have three bikes now where I have had to either shim the bolts or outright find replacements for them because the stock bolts are not the right length. See? Sell the brake caliper mounting bolts with the frames! Oh! And by the way, this was never an issue with the IS standard disc caliper mounts from the 2000's. And yes- this Singular frame needed different bolts to mount the calipers on both ends. 

The semi-floating replaceable rear drop out. Singular actually sent two. Nice!
 

The Gryphon Mk3 also came with this through axle compatible breakaway rear derailleur mount that is "semi-floating". This means that the hangar doesn't become rigid with the frame when you bolt it on with the single 3mm hex head bolt. That bolt, (it is a special shouldered bolt), has a stop built into it that keeps you from tightening up the hangar until it cannot move. The theory being here that the through axle will thread into the hangar and automatically align the wheel with the derailleur you bolt to the hangar, assuming, of course, that your derailleur is not bent. This eliminates having to tweak the hangar because the frame is slightly out of spec. Nice. 

But what is nicer is that Singular sent two hangars! So, I have one in hand just in case, which is a nice touch. I've always thought all bicycles with these breakaway hangars should come with a spare. It just makes sense.

An older Velo Orange "Grand Cru" head set.

Part of the plan was to utilize as much silver/polished aluminum stuff that I could on this build to bring a bit of "class" to the overall look. Singular Cycles' Sam Alison has always had an eye for more classic lines (Peregrine, Kite) and classic or understated paint schemes which lend themselves to classic build aesthetics. I wanted to honor Sam's sensibilities with this build and honestly, I like that look as well. 

Teravail 29" X 2.8 Coronado skin wall tires will complete the look.

The wheels were a question mark coming into this build as well, but because everything pointed toward the 3X9 set up I am pursuing now, I chose the Project Wide Gravel Wheels v2 for this build. 

These wheels have black rims and hubs with half the spokes being black and the other half silver. I use that pattern as a way to designate the wheels as something I built. Kind of "my signature wheel build", if you will. 

Those wheel also have an XD driver on the rear for a free hub. I just ordered a Shimano HG free hub to swap that out on the DT Swiss 350 hub. 

When that shows up I will get things on the final track to the finish line on this build and I will be able to show it all off. But before that, I'll have one more post showing the cockpit choices and the shifters I am using for the build. 

Stay tuned for that post coming soon!

Wednesday, March 08, 2023

Gents Race: Bike Choice Part 2

The current state of the Noble Bikes GX5
Last week I posted my thoughts on bike choice for the Gents Race upcoming on April 1st in Slater, Iowa. I listed my thoughts on why the Twin Six Standard Rando v2 was a good choice. Well......kind of. I got sidetracked and went off in another direction talking about head set adjustment. 

Today I want to go over my reasons for taking the Noble Bikes GX5 versus the Twin Six and why one or the other is not a good idea for the event.

Okay, so first let's look at the obvious- The Noble Bikes GX5 is pretty much a 'gravel race bike'. It has a carbon frame and fork. It is my lightest gravel oriented bike. It has high-end wheels, components, and would do everything well that I need it to, especially for the Gents Race. 

I've been fortunate enough to have had several components sent in to me to review which have ended up on this bike. (Standard Disclaimer Page) Those things are very light and focused on comfort. Everything lines up for this to be the bike for the Gents Race. 

So, why even think about taking the Standard Rando? 

Well..... Steel frame for one. This event happens when the weather can be anything. Last year was a good reminder that mud and grit can be an issue and on a carbon frame. Grinding more grit into it via tires is going to shorten its lifespan. 

The Standard Rando is also a bit more stable. Especially in looser conditions and in heavy winds, which the Gents Race has been known for. The Standard Rando is also a tic more comfortable in terms of positioning. 

The carbon bits on this bike also help to keep the weight down and more comfortable. The drive train has a bit lower gearing which would be nice in a heavy wind. There are a lot of things to recommend the Standard Rando v2.  So.....

Which one? 

Frankly, either one will be okay, it is me I have to worry about! I need to get in the miles and get 'tuned-up" or neither bike will really do me any good here. So, I think I will do rides on both and just see how I feel. But yeah....I need to get into shape more than I need to be worrying about this!

But it is fun to speculate and look at the gear. Stay tuned.....

Gents Race: Bike Choice Part 2

The current state of the Noble Bikes GX5
Last week I posted my thoughts on bike choice for the Gents Race upcoming on April 1st in Slater, Iowa. I listed my thoughts on why the Twin Six Standard Rando v2 was a good choice. Well......kind of. I got sidetracked and went off in another direction talking about head set adjustment. 

Today I want to go over my reasons for taking the Noble Bikes GX5 versus the Twin Six and why one or the other is not a good idea for the event.

Okay, so first let's look at the obvious- The Noble Bikes GX5 is pretty much a 'gravel race bike'. It has a carbon frame and fork. It is my lightest gravel oriented bike. It has high-end wheels, components, and would do everything well that I need it to, especially for the Gents Race. 

I've been fortunate enough to have had several components sent in to me to review which have ended up on this bike. (Standard Disclaimer Page) Those things are very light and focused on comfort. Everything lines up for this to be the bike for the Gents Race. 

So, why even think about taking the Standard Rando? 

Well..... Steel frame for one. This event happens when the weather can be anything. Last year was a good reminder that mud and grit can be an issue and on a carbon frame. Grinding more grit into it via tires is going to shorten its lifespan. 

The Standard Rando is also a bit more stable. Especially in looser conditions and in heavy winds, which the Gents Race has been known for. The Standard Rando is also a tic more comfortable in terms of positioning. 

The carbon bits on this bike also help to keep the weight down and more comfortable. The drive train has a bit lower gearing which would be nice in a heavy wind. There are a lot of things to recommend the Standard Rando v2.  So.....

Which one? 

Frankly, either one will be okay, it is me I have to worry about! I need to get in the miles and get 'tuned-up" or neither bike will really do me any good here. So, I think I will do rides on both and just see how I feel. But yeah....I need to get into shape more than I need to be worrying about this!

But it is fun to speculate and look at the gear. Stay tuned.....

Tuesday, March 07, 2023

Singular Cycles Gryphon Mk3 Build: Introduction

The Gryphon comes with this cool head badge.

Well, the much anticipated arrival of the Singular Cycles Gryphon Mk3 has happened. It showed up at the Guitar Ted Productions Headquarters on Friday afternoon. 

This post will be the introduction to the build. I don't have everything nailed down 100%, and I didn't before the bike arrived, because there were questions that I could only get the answers to when I had the frame in-hand. So, yes- some of those findings are sending this build in a certain direction. I'll get around to that in a bit. But first, let's just take a look at this frame set.

It is the third iteration of the Gryphon. Mks 1 and 2 were largely the same, with differing colors, and minor frame spec differences, as I recall. This, the Mk3, is a big departure from the original Gryphon in several ways. 

The basic design intentions are still there: A drop bar specific frame with no suspension correction and the ability to be single speed. To that end we have a taller head tube than you'd see on a flat bar design like the Singular Swift, which is the bike in Singular's range most akin to the Gryphon. There is the eccentric bottom bracket, a set-bolt type with two 4mm grub screws coming in from underneath the bottom bracket which secures the eccentric and keeps it stationary. You've got your two water bottle mounts, rack and fender mounts, and an included seat collar. 

The Mk3 Gryphon's fork

When we get to the fork and rear drop outs we see the accommodation for through axles which previous Gryphons (steel ones, anyway) did not have. The fork also sports a water bottle boss set on each leg. Eyelets for a front rack and fenders are on the dropouts. You can see the hole in the fork crown which would also support a rack or a fender. You cannot see it in this view, but the Gryphon is now flat mount brake compatible, which previous Gryphons were not. 

The Gryphon Mk3 frame

The downtube sports a triple boss arrangement which you could put an Anything Cage type rack on, or one of those over-sized water bottle cages. There is a set of bosses under the down tube for storage, fuel, or another water bottle cage. You can kind of see the flat mount brake mounts and the rack mounts in this view as well. Of course, there is that eccentric bottom bracket, a hallmark of the Singular Swift and Gryphon models. The head tube, curiously, is not a 44mm one, so no tapered steer tubes here, and no carbon fiber nonsense either! 

There is a nice gusset under the downtube at the head tube and you can see the bolt on cable guide here.

Cable management is handled by a few under-the-down tube cable guides and welded on cable guides from the bottom bracket back on each chain stay for the rear derailleur cable and rear brake. Now, Singular doesn't say that you can run a front derailleur, but they don't say that you can't. I think they lean toward no front derailleur unless its one of those with a cable stop built in.I say this because there is no cable guide or stop built into the frame under the bottom bracket. This will come up as an important point in a bit.

The grub screws for the eccentric.
The replaceable derailleur hangar is secured in place mostly by the through axle

I guess there is one other thing that is different with the Mk3 and that is that it can handle up to 29" X 3" tires. That's a big difference from the old Gryphons which were limited to 2.4" tires, if I recall correctly. Also: The frame weighs 6.2lbs and the fork was a bit over 2lbs, if I recall correctly. I didn't buy this for lightweight though. So, there you go. That's the new Singular Gryphon Mk3. Now what the heck am I going to bolt on to this thing? Well... 

Remember when I mentioned the front derailleur thing? A lot of what I wanted to do would be predicated on whether or not the bike would support a triple or double chain ring set up. The bike I was taking the parts off of to build this had a triple ring crankset with a Deore XT front derailleur. My hope was that this would all transfer over, and if it would go, then I would be building a 3 X 9 geared rig. If it wouldn't, then I'd be building a 1 X 11 drive train. And if that had any road blocks at all, I would then just build it as a single speed, but that would be a last resort. 

So, the first order of business would be to mock up the bottom bracket, crank set, and front derailleur to see if it all would go. 

I had to get an image of this. I doubt I'll see it again for a while!

Clearance, Clarence.

Well.....as you can see, and much to my surprise, the crankset clears with plenty of room. The front derailleur is the correct size as well and bottom pull is what I needed here. The bike seems to have been made for this, but......

However; as stated earlier, there is no cable stop here for the facilitation of the routing of a front derailleur. So I guess I have my work cut out for me. But besides that, it looks as though I have the entire cockpit which I can now just transfer over from the old bike. I think I have some flat mount brake calipers, but I haven't been able to locate those just yet. Then it'll be on to the wheels.

Stay tuned.....

Singular Cycles Gryphon Mk3 Build: Introduction

The Gryphon comes with this cool head badge.

Well, the much anticipated arrival of the Singular Cycles Gryphon Mk3 has happened. It showed up at the Guitar Ted Productions Headquarters on Friday afternoon. 

This post will be the introduction to the build. I don't have everything nailed down 100%, and I didn't before the bike arrived, because there were questions that I could only get the answers to when I had the frame in-hand. So, yes- some of those findings are sending this build in a certain direction. I'll get around to that in a bit. But first, let's just take a look at this frame set.

It is the third iteration of the Gryphon. Mks 1 and 2 were largely the same, with differing colors, and minor frame spec differences, as I recall. This, the Mk3, is a big departure from the original Gryphon in several ways. 

The basic design intentions are still there: A drop bar specific frame with no suspension correction and the ability to be single speed. To that end we have a taller head tube than you'd see on a flat bar design like the Singular Swift, which is the bike in Singular's range most akin to the Gryphon. There is the eccentric bottom bracket, a set-bolt type with two 4mm grub screws coming in from underneath the bottom bracket which secures the eccentric and keeps it stationary. You've got your two water bottle mounts, rack and fender mounts, and an included seat collar. 

The Mk3 Gryphon's fork

When we get to the fork and rear drop outs we see the accommodation for through axles which previous Gryphons (steel ones, anyway) did not have. The fork also sports a water bottle boss set on each leg. Eyelets for a front rack and fenders are on the dropouts. You can see the hole in the fork crown which would also support a rack or a fender. You cannot see it in this view, but the Gryphon is now flat mount brake compatible, which previous Gryphons were not. 

The Gryphon Mk3 frame

The downtube sports a triple boss arrangement which you could put an Anything Cage type rack on, or one of those over-sized water bottle cages. There is a set of bosses under the down tube for storage, fuel, or another water bottle cage. You can kind of see the flat mount brake mounts and the rack mounts in this view as well. Of course, there is that eccentric bottom bracket, a hallmark of the Singular Swift and Gryphon models. The head tube, curiously, is not a 44mm one, so no tapered steer tubes here, and no carbon fiber nonsense either! 

There is a nice gusset under the downtube at the head tube and you can see the bolt on cable guide here.

Cable management is handled by a few under-the-down tube cable guides and welded on cable guides from the bottom bracket back on each chain stay for the rear derailleur cable and rear brake. Now, Singular doesn't say that you can run a front derailleur, but they don't say that you can't. I think they lean toward no front derailleur unless its one of those with a cable stop built in.I say this because there is no cable guide or stop built into the frame under the bottom bracket. This will come up as an important point in a bit.

The grub screws for the eccentric.
The replaceable derailleur hangar is secured in place mostly by the through axle

I guess there is one other thing that is different with the Mk3 and that is that it can handle up to 29" X 3" tires. That's a big difference from the old Gryphons which were limited to 2.4" tires, if I recall correctly. Also: The frame weighs 6.2lbs and the fork was a bit over 2lbs, if I recall correctly. I didn't buy this for lightweight though. So, there you go. That's the new Singular Gryphon Mk3. Now what the heck am I going to bolt on to this thing? Well... 

Remember when I mentioned the front derailleur thing? A lot of what I wanted to do would be predicated on whether or not the bike would support a triple or double chain ring set up. The bike I was taking the parts off of to build this had a triple ring crankset with a Deore XT front derailleur. My hope was that this would all transfer over, and if it would go, then I would be building a 3 X 9 geared rig. If it wouldn't, then I'd be building a 1 X 11 drive train. And if that had any road blocks at all, I would then just build it as a single speed, but that would be a last resort. 

So, the first order of business would be to mock up the bottom bracket, crank set, and front derailleur to see if it all would go. 

I had to get an image of this. I doubt I'll see it again for a while!

Clearance, Clarence.

Well.....as you can see, and much to my surprise, the crankset clears with plenty of room. The front derailleur is the correct size as well and bottom pull is what I needed here. The bike seems to have been made for this, but......

However; as stated earlier, there is no cable stop here for the facilitation of the routing of a front derailleur. So I guess I have my work cut out for me. But besides that, it looks as though I have the entire cockpit which I can now just transfer over from the old bike. I think I have some flat mount brake calipers, but I haven't been able to locate those just yet. Then it'll be on to the wheels.

Stay tuned.....

Monday, March 06, 2023

Brown Season: Hints Of Spring

Escape Route: Hoff Road
 There are signs of Spring that one starts to pick up on if they live in the same area for a long while. Here, where I live in Iowa, there are certain "signs of Spring" which I look for every year to give me a bit of hope that Winter is actually going to leave us. 

In no particular order these things are:

  • Obviously, the snow melting.
  • The return of Robins
  • The return of the Red Winged Blackbirds
  • The frost boils on the gravel roads.
  • The maintainers come out to tend to the roads

All of the above have happened already, so, despite the chances that we may get snow again, or have a cold-snap, I am declaring that Spring has arrived in East-Central Iowa. So there.....

It is getting harder to find snow now.

Besides those things, I can say that we are about two weeks ahead of schedule with Spring - if this weather holds up. We could always go backward and have a big snowstorm or something. But typically the snow isn't all gone until mid-March around here. 

A big patch of freshly laid gravel on Ansborough Avenue.


About mid-ride the skies started clearing up a bit.

My ride started out cold and cheerless. It was a bit windy, which made the wind chill pretty significant and the air temperature was in the low 30's anyway. I was a bit worried that my windproof Craft base layer, my long sleeved Pirate Cycling League jersey, and my Bontrager heavy-duty wind jacket would not be enough to ward off this colder air. But once I was out there working, it all was just fine. 

It helped a lot that once the Sun started peeking through that the temperatures moderated a tiny bit, but more importantly, the Sun's warmth really does a trick this time of year, no matter what the temperature is. Those rays of goodness were making it feel a lot better out there.

 Note the darker stripe of gravel on the right here. That's frost boiling up through the roadbed.

You can see the County maintainer's tracks here.

Road conditions were all over the map. There was "hero gravel", "normal" gravel conditions, ditch-to-ditch fresh gravel, and many spots where the frost was coming out that made the roadbed soft and fluffy. This was most common along the edges where traffic typically doesn't run. You knew if you dropped a tire in this. It was like putting the brakes on. 

Eventually the sky was more blue than gray.

The Sun is still lower in the sky, as evidenced by the long shadows here.

I managed to get in what I wanted to time-wise and I was pleased with the outcome of my ride. It didn't start out very well, I wasn't breathing right and I felt like my heart rate was too high, but everything settled down eventually and I had good sensations for the remainder of the ride. Most importantly, I didn't go too hard and I was able to get good base miles in on this day. 

Next I'll start stretching the time out and start getting longer rides in. I have a few routes that should work well for getting the ball rolling here this Spring, as long as this weather holds out. The goal is to be ready for 65 miles by April 1st at the Gents Race.

Brown Season: Hints Of Spring

Escape Route: Hoff Road
 There are signs of Spring that one starts to pick up on if they live in the same area for a long while. Here, where I live in Iowa, there are certain "signs of Spring" which I look for every year to give me a bit of hope that Winter is actually going to leave us. 

In no particular order these things are:

  • Obviously, the snow melting.
  • The return of Robins
  • The return of the Red Winged Blackbirds
  • The frost boils on the gravel roads.
  • The maintainers come out to tend to the roads

All of the above have happened already, so, despite the chances that we may get snow again, or have a cold-snap, I am declaring that Spring has arrived in East-Central Iowa. So there.....

It is getting harder to find snow now.

Besides those things, I can say that we are about two weeks ahead of schedule with Spring - if this weather holds up. We could always go backward and have a big snowstorm or something. But typically the snow isn't all gone until mid-March around here. 

A big patch of freshly laid gravel on Ansborough Avenue.


About mid-ride the skies started clearing up a bit.

My ride started out cold and cheerless. It was a bit windy, which made the wind chill pretty significant and the air temperature was in the low 30's anyway. I was a bit worried that my windproof Craft base layer, my long sleeved Pirate Cycling League jersey, and my Bontrager heavy-duty wind jacket would not be enough to ward off this colder air. But once I was out there working, it all was just fine. 

It helped a lot that once the Sun started peeking through that the temperatures moderated a tiny bit, but more importantly, the Sun's warmth really does a trick this time of year, no matter what the temperature is. Those rays of goodness were making it feel a lot better out there.

 Note the darker stripe of gravel on the right here. That's frost boiling up through the roadbed.

You can see the County maintainer's tracks here.

Road conditions were all over the map. There was "hero gravel", "normal" gravel conditions, ditch-to-ditch fresh gravel, and many spots where the frost was coming out that made the roadbed soft and fluffy. This was most common along the edges where traffic typically doesn't run. You knew if you dropped a tire in this. It was like putting the brakes on. 

Eventually the sky was more blue than gray.

The Sun is still lower in the sky, as evidenced by the long shadows here.

I managed to get in what I wanted to time-wise and I was pleased with the outcome of my ride. It didn't start out very well, I wasn't breathing right and I felt like my heart rate was too high, but everything settled down eventually and I had good sensations for the remainder of the ride. Most importantly, I didn't go too hard and I was able to get good base miles in on this day. 

Next I'll start stretching the time out and start getting longer rides in. I have a few routes that should work well for getting the ball rolling here this Spring, as long as this weather holds out. The goal is to be ready for 65 miles by April 1st at the Gents Race.

Sunday, March 05, 2023

The GTDRI Stories: A Look At Gravel Tech Circa 2011-2012

The first gravel-marketed tires I ever tried. March 2012
 "The GTDRI Stories" is a series telling the history, untold tales, and showing the sights from the run of Guitar Ted Death Ride Invitationals. This series will run on Sundays. Thanks for reading!

In 2011, things in terms of gravel cycling were still based in the experimental phase. There were no- up through the end of 2011- "gravel" oriented bits, accessories, or bicycles that you could readily purchase at retail. Nothing. Nada.....zilch! 

But the end of 2011 marked the start of the new era of cycling in terms of manufacturers and eventually, the riders, events, and cycling culture. Without the cycling industry's support, and belief in the promise of a return on investment, I seriously doubt that gravel cycling would exist as we know it today. Certainly, it would have remained mostly an odd-ball Mid-Western based activity. But by the end of 2011, there were things headed to market that would eventually aid in gravel cycling's growth and acceptance. Today, I want to talk a bit about this and how it eventually changed what I saw at the GTDRI over the years.

I wrote recently about tires and how this one component of a bicycle can engender a near religious fervor amongst certain cyclists. Obviously, we can look at a few tire introductions and see that, without these important rubber and fabric hoops, certain segments of cycling may never have happened at all. One great example is mountain biking. Early pioneers of the MTB were using cruiser tires which were heavy and less than good in many situations. Once true 26" MTB tread designs were made, the segment of MTB took off. In a similar way, 29 inch wheeled MTB's would never have seen the light of day without a few passionate folks that pushed for what became known as "The Tire". The 29" WTB Nanoraptor.  Think about fat biking. Would that segment of cycling exist without the venerable Surly Endomorph? 

Gravel cycling also has a "genesis tire" in the Clement, (now Donnelly) MSO 700 X 40mm tire. I first laid eyes on this gem of a tire in a box I opened in my "Lab" in 2012. (Read my post about that here) As stated in that linked post, I heard about this tire at the 2012 Frostbike show. I overheard conversations that Joe Meiser, an engineer at that time for QBP, was having with Donn Kellogg, the owner of the Clement tire brand. Through that eavesdropping I understood that Clement and Joe, along with a few others, had been testing prototype tires for Clement to be marketed toward gravel riders. That tire ended up being the 700c X 40mm Clement MSO. 

The Salsa Cycles 2012 Warbird gravel bike

 Of course, those tires were destined for the upcoming Salsa Cycles Warbird, the first, purpose-built gravel racing bike. Both the bicycle and tires had been battle-tested in Trans Iowa and the Dirty Kanza 200, plus at other venues. I'm sure that the GTDRI was also a minor influence here as Jason Boucher was Salsa's brand director at that time, and he'd been on a couple GTDRI's by this point. 

2011 Raleigh RX 10

But as exciting as all these developments were, it would be several years before the GTDRI would be mostly gravel bikes. Up through 2014, the mainstays of the gravel scene continued to be drop bar MTB, 29"ers, and cyclo-cross bikes. There were still "gravel mutts" aplenty as well, which made things even more interesting out there. 

Part of the reason for this latency for the "gravel specific" bike was that Salsa made a mistake in judging what the market was after. When the Warbird was announced, the titanium version was deemed desirable, but for many, it was a jewel that was too expensive and too precious to be thrown into the cauldron of dust, mud, and rocks. Less expensive, more "rough and ready" options were thought then by riders as being what was needed. I remember there being a bit of confusion and dismay at the aluminum Warbird. That was a budget price many riders could afford, but I think a steel bike was what most wanted and expected. 

The tire was a great option, but due to Clement's lack of "horsepower" in being able to produce enough tires, many riders still were going with the tried and true Schwalbe Marathon series of tires. Of course, the thought of a tubeless gravel tire was prominent amongst gravel aficionados, and that was another thing which kind of held up the process of acceptance as well. It wouldn't be until 2015 that gravel riders would see the first tubeless specific gravel tires on the market. 

From the 2012 GTDRI (Image *I think* by John Mathias)

So, it wasn't as though the gravel specific stuff took over in a big wave. No, it was more of an imperceptible creep that by, say 2019, had seen gravel cycling overtaken by gravel specific everything. In the meantime, we kept using drop bar MTB's like the Fargo, regular hard tail mountain bikes, mostly 29"ers, and the ubiquitous cyclo-cross bikes. 

Meanwhile non-tubeless tire choices quickly kicked out the heavier, ponderous Schwalbe touring tires as the tire of record. Clement had a surefire hit with the MSO, and in 2014 there were even more choices hitting the market in terms of tires. These were mostly all lighter, better riding, and slightly wider tires that made more sense to try to "garage tubeless" into being tubeless tires. 

I think the GTDRI was a great example of where the enthusiast market was at during its run and the bikes that showed up were always representative of what was most often seen on the gravel at the time. In terms of the exact time period I am covering now, it was all still a time of discovery, experimentation, and community shared knowledge that was driving the technology of the day. 

We were figuring out how to be self-supported, using frame bags, different styles of lighting, different set ups on bikes, and all of that. A few of us were riding more gravelly oriented bikes like the Salsa Cycles Vaya, or by 2014, the Raleigh Tamland, and of course, the ever present Fargo and Cross Check bikes. It was a fun time period, but I think it was also a time when the riders started to anticipate that the industry was now onto gravel and we were all waiting to see what would come out next.

Speaking of "next"... "The lead up to the 2012 GTDRI is on tap for next week.

The GTDRI Stories: A Look At Gravel Tech Circa 2011-2012

The first gravel-marketed tires I ever tried. March 2012
 "The GTDRI Stories" is a series telling the history, untold tales, and showing the sights from the run of Guitar Ted Death Ride Invitationals. This series will run on Sundays. Thanks for reading!

In 2011, things in terms of gravel cycling were still based in the experimental phase. There were no- up through the end of 2011- "gravel" oriented bits, accessories, or bicycles that you could readily purchase at retail. Nothing. Nada.....zilch! 

But the end of 2011 marked the start of the new era of cycling in terms of manufacturers and eventually, the riders, events, and cycling culture. Without the cycling industry's support, and belief in the promise of a return on investment, I seriously doubt that gravel cycling would exist as we know it today. Certainly, it would have remained mostly an odd-ball Mid-Western based activity. But by the end of 2011, there were things headed to market that would eventually aid in gravel cycling's growth and acceptance. Today, I want to talk a bit about this and how it eventually changed what I saw at the GTDRI over the years.

I wrote recently about tires and how this one component of a bicycle can engender a near religious fervor amongst certain cyclists. Obviously, we can look at a few tire introductions and see that, without these important rubber and fabric hoops, certain segments of cycling may never have happened at all. One great example is mountain biking. Early pioneers of the MTB were using cruiser tires which were heavy and less than good in many situations. Once true 26" MTB tread designs were made, the segment of MTB took off. In a similar way, 29 inch wheeled MTB's would never have seen the light of day without a few passionate folks that pushed for what became known as "The Tire". The 29" WTB Nanoraptor.  Think about fat biking. Would that segment of cycling exist without the venerable Surly Endomorph? 

Gravel cycling also has a "genesis tire" in the Clement, (now Donnelly) MSO 700 X 40mm tire. I first laid eyes on this gem of a tire in a box I opened in my "Lab" in 2012. (Read my post about that here) As stated in that linked post, I heard about this tire at the 2012 Frostbike show. I overheard conversations that Joe Meiser, an engineer at that time for QBP, was having with Donn Kellogg, the owner of the Clement tire brand. Through that eavesdropping I understood that Clement and Joe, along with a few others, had been testing prototype tires for Clement to be marketed toward gravel riders. That tire ended up being the 700c X 40mm Clement MSO. 

The Salsa Cycles 2012 Warbird gravel bike

 Of course, those tires were destined for the upcoming Salsa Cycles Warbird, the first, purpose-built gravel racing bike. Both the bicycle and tires had been battle-tested in Trans Iowa and the Dirty Kanza 200, plus at other venues. I'm sure that the GTDRI was also a minor influence here as Jason Boucher was Salsa's brand director at that time, and he'd been on a couple GTDRI's by this point. 

2011 Raleigh RX 10

But as exciting as all these developments were, it would be several years before the GTDRI would be mostly gravel bikes. Up through 2014, the mainstays of the gravel scene continued to be drop bar MTB, 29"ers, and cyclo-cross bikes. There were still "gravel mutts" aplenty as well, which made things even more interesting out there. 

Part of the reason for this latency for the "gravel specific" bike was that Salsa made a mistake in judging what the market was after. When the Warbird was announced, the titanium version was deemed desirable, but for many, it was a jewel that was too expensive and too precious to be thrown into the cauldron of dust, mud, and rocks. Less expensive, more "rough and ready" options were thought then by riders as being what was needed. I remember there being a bit of confusion and dismay at the aluminum Warbird. That was a budget price many riders could afford, but I think a steel bike was what most wanted and expected. 

The tire was a great option, but due to Clement's lack of "horsepower" in being able to produce enough tires, many riders still were going with the tried and true Schwalbe Marathon series of tires. Of course, the thought of a tubeless gravel tire was prominent amongst gravel aficionados, and that was another thing which kind of held up the process of acceptance as well. It wouldn't be until 2015 that gravel riders would see the first tubeless specific gravel tires on the market. 

From the 2012 GTDRI (Image *I think* by John Mathias)

So, it wasn't as though the gravel specific stuff took over in a big wave. No, it was more of an imperceptible creep that by, say 2019, had seen gravel cycling overtaken by gravel specific everything. In the meantime, we kept using drop bar MTB's like the Fargo, regular hard tail mountain bikes, mostly 29"ers, and the ubiquitous cyclo-cross bikes. 

Meanwhile non-tubeless tire choices quickly kicked out the heavier, ponderous Schwalbe touring tires as the tire of record. Clement had a surefire hit with the MSO, and in 2014 there were even more choices hitting the market in terms of tires. These were mostly all lighter, better riding, and slightly wider tires that made more sense to try to "garage tubeless" into being tubeless tires. 

I think the GTDRI was a great example of where the enthusiast market was at during its run and the bikes that showed up were always representative of what was most often seen on the gravel at the time. In terms of the exact time period I am covering now, it was all still a time of discovery, experimentation, and community shared knowledge that was driving the technology of the day. 

We were figuring out how to be self-supported, using frame bags, different styles of lighting, different set ups on bikes, and all of that. A few of us were riding more gravelly oriented bikes like the Salsa Cycles Vaya, or by 2014, the Raleigh Tamland, and of course, the ever present Fargo and Cross Check bikes. It was a fun time period, but I think it was also a time when the riders started to anticipate that the industry was now onto gravel and we were all waiting to see what would come out next.

Speaking of "next"... "The lead up to the 2012 GTDRI is on tap for next week.