Tuesday, January 27, 2026

Fifteen Years Of Fat Biking

Shot taken on January 22nd, 2011
 Hard to believe it, but it has been fifteen years since the first turnkey fat bike, the Salsa Mukluk, came into my life. This bicycle was many people's first introduction to fat biking. 

It also is kind of difficult to understand the impact this bicycle had on cyclists, and even non-cyclists in this community and online. 

First of all, look at this 2011 Salsa Cycles Mukluk and you might think it is pretty unremarkable. The tires do not look all that impressive. The rear caliper is mounted on the seat stay? And what is that..... A triple crank set?!! What kind of dinosaur bike is this anyway?  

But our 2026 perspective belies the reality of what was 2011. Then a fat bike was rare. Most people had never seen one before. A 26" x 3.8" tire was huuuuge! I used to get folks stopping in traffic to watch me roll by. I even had someone film me on their camera phone circa 2014 while riding home from work one day. 

The fat bike was truly an oddity then, and if you did not like attention, well, a fat bike wasn't the bike for you! I got asked a zillion questions about the bike, and most were a variation on a theme which was, "Isn't that hard to pedal?" 

Running tubeless tires on Velocity Dually rims with 26" x 4.0" tires in 2013. 
I was enamored of fat bikes back then. It was an option which opened up cycling in Winter for me. I ended up buying a 2012 Ti Mukluk within a year of getting the first one. I was entering the Triple D fat bike event. I was plunking around frozen trails, sand bars, and in the mud in Summertime. 

I often feel as though the fat bike development curve was one of constant innovation until about 2015. Then it all kind of fell away quickly. It seemed as though all the air got sucked out of the sails and everyone who wanted a fat bike now had one. 

I've owned four fat bikes and built up two for my son. I still have the Ti Muk 2, The Snow Dog, and the Blackborow DS. I also still have one of my son's old fat bikes. I probably only really need one! But the original Mukluk, the one I call the Snow Dog, was a birthday gift and the Blackborow does things nothing else I have will do. I guess if it came down to it, I would let those two go and keep the Ti Muk 2. My son's old fat bike could go as well, although I've had folks say I should keep it. 

Today fat bikes are no big deal. No one gawks at you when you are cruising to the woods. I don't get many questions at all anymore about my fat bikes when I am out on them. Maybe because they do not have electric motors.... 

The Snow Dog 2026
I was a bit amused last Fall when I was riding my Ti Muk 2 home. I have a slight hill going up West 2nd Street and I heard a buzzing noise behind me getting louder and louder. Then suddenly a younger looking individual sitting and not pedaling went whizzing by on a fat bike with an electric motor. 

He probably thought my pedaling a fat bike was rather quaint and arcane. The mere thought of a fat bike you had to pedal. How does that work?

Sometimes I wonder if the fat bike was truly the last innovative bicycle design. The last bicycle which was so different people would stop you on the street to see what it was you were on. Nothing like riding a "gravel bike", and these new 32" wheels won't draw attention either. 

Oh, you might think a 32"er would draw attention. I don't think so. I rode a 36"er which Ben Witt let me borrow for a few months. I commuted on it and not one person reacted to it as being different. No questions about it at all. No side glances. Nothing. 

But ride a fat bike the next day and I was going to know the difference. 

Besides, fat bikes did things no other bicycle could do. They still do those things, but now "those things" are not novel. So, I really do think fat bikes were the last bicycle which made a new category with possibilities to do things older bicycles could not do. Truly an innovation. 

Don't even come at me with the motorized bicycle thing!  

Bonus Content: I reviewed my original Mukluk "with perspective" last year. Read the review here.  

Monday, January 26, 2026

Too Cold

Kid's bike give-away scene.
So, yeah..... I haven't been riding much of late, but sub-zero temperatures will do that to me. My birthday on Friday was frigid, with double-digit below zero temperatures all morning long and we did not get above zero until Sunday. 

Monday we reached the teens above zero, so I rode to work. Yee-haw! At least I am back on the bike again outdoors. It seems this Winter has decided it will act like a "real Winter" after not getting its act together for the first two weeks of January where it was quite warm. 

In the meantime I have been a bit stir crazy being cooped up indoors. I have contemplated some bicycle changes, but for the sake of just changing things. This is not good enough. I do not want to get involved in setting up a bike in a new way because I am bored. (Besides upgrading my fixed gear situation)

I did get to be involved in a kid's bike give away via a local non-profit foundation whose main mission is to help disadvantaged families with children. The foundation vetted out the kids and we just had to match them up with bicycles. That was a lot of fun to do. We ended the day giving away 16 youth bikes. 

This may not sound like much, but the hope is to see even just a few of these kids get jazzed by cycling and hopefully they will make it a long-term kind of deal. There were a lot of "thank you's" and good vibes all around. 

So, it hasn't all been a downer. 

Sunday, January 25, 2026

Regulations Hit E-Bikers In New Jersey

E-bike repair que at a Chicago shop
Electric motors on assisted bicycles or on throttle controlled bicycles (mopeds) have finally been abused to the point which a state has taken the measures in their legislature to govern their existence. New Jersey's governor signed a bill into law on this day a week ago which now will require licensing, registration, and insurance, just like any other motor vehicle. 

The measure was precipitated by the recent loss of life of a 13 year old this past September who was hit by a vehicle while the youth was riding an electric motorized bicycle. 

The law, which New Jersey e-bike owners will have six months to comply with, will also regulate age of the operator at 17 years and the operator of any electrified bicycle will have to have a valid drivers license. 

The details of the story can be read online at "Bicycle Retailer and Industry News" HERE. 

Comments: First of all, thanks to Ari Andonopuolos for today's image. He sent this to me to show what he was seeing most often for repairs in a shop in Chicago. Those sure do not look like mainstream, pedal assist electric bicycles, do they? 

Comments on the stories I have seen on this development are mostly pointing fingers at these sorts of "bicycles" and how "online sales are pushing illegal e-bikes into the marketplace". The commenters are saying this is why we cannot have nice things when it comes to electrified bicycles. But really, if this is the reason for this law being passed, or one of the reasons, are the sellers to blame? 

Certainly, this may be seen as an unintended circumstance in the economy of the e-bike. However; when there was a void in the marketplace in terms of low pricing and availability, it is no wonder some companies stepped in to fill the demand. 

The demand..... Yes, it was the consumer who was the conduit for these "more-motorcycle-like" e-bikes to be coming into the system. Bicycle shops could not serve this demand, and so who fills that vacuum? The consumer has some responsibility here. 

In the end, this e-bike thing is evolving along the lines which I always figured it would go. Eventually we get to a place where it is easier for government to legislate rules and enforce laws regulating these vehicles. It sure looks like it is happening now.  

Saturday, January 24, 2026

The 32" Watch: Yakking About Big Hoops

Yep..... Another Guitar Ted Podcast just dropped. You'd think we both had nothing else better to do. (Correct) So, anyway, maybe you'd like to check out our ramblings on these monster sized hoops. Click Here

So, as far as this whole new wheel size becoming a thing or not, here is a nugget of wisdom I gleaned from my time covering the cycling industry. It is a "sure thing" something is going to be marketed heavily if this one thing occurs. 

The one thing? Original Equipment Manufacturer orders. Often abbreviated to "OEM" or even "OE", this means some factory is receiving an order from a company/brand to make something in mass quantities. 

In other words, to give you a clearer picture, Fox is not coming out with a 32" suspension fork unless some company/brand orders thousands of them. Same goes for tires, or rims/wheels. Anything specific to a standard ordered by a company/brand, in this case, 32" wheels, is a tip-off as to what is going to happen. 

We know Maxxis is coming out with several 32" tire models. We have a strong indication via insiders that a Fox suspension fork is coming out. Manitou will have a 32"er suspension fork by mid-2027. I posted about Schwalbe's tire plans last week. It isn't a question anymore. 32" tires/wheels will become available to purchase world-wide in the very near future. 

Expect a ton of marketing to show up this Spring showing the benefits of these wheels. Expect a ton of push-back on site comment sections and on social media. I suspect we all will be pretty tired of the hype by mid-Summer. 

Rich Dillen's Vassago 32"er (Image courtesy of Rich Dillen)

 If I had to say, my opinion is bikes with 32" wheels will become available in shops and online by the Fall. More options will hit from then onward until Spring 2027. Some second tier brands will be certain to have them in their line up. Maybe......maybe one of the big four - Trek, Specialized, Cannondale,or Giant will also, but my bet is they all are going to come later, if they come at all. I'm not saying one of these four mainstream brands will not make a 32"er, but it is certainly possible one or more of them will make a 32"er, or several versions of them. I just think they will be amongst the latter offerings. 

And you will see gravel, recreational, and eBike versions with giant hoops on them. More than just MTB's will be 32"ers. Anyway..... There is a lot more detail to this. Listen to the episode. Let me know what you think in the comments.    

Real World Feedback: 

Of course, it's all blue sky until the reality of what a 32"er actually can or cannot do is discovered by riders. I was fortunate enough to have had Rich Dillen message me after his recent ride in a local short track event. 

Image courtesy of R.Dillen by Pisgah Paparazzi

Rich has a blog where you can check out his takes on the 32" wheels, but suffice it to say that after about 45 minutes of him messaging me he pretty much convinced me of this wheel size and its benefits. 

I won't belabor the points he made here, (again - See his blog for more), but suffice it to say that even if half of what he said is true 32"ers will be the preferred single track bike in the Midwest. 

 I know many will scoff, and many won't give 32"ers a chance. Look......I get it. I went through all of the skepticism surrounding 29"ers too. They said 29"ers were dumb, a fad, and worse things about those who rode them. 26"ers weren't going anywhere. But look around your local bike shop or peruse your favorite online MTB purveyors. How many new 26" wheeled MTB's do you find for sale in 2026?

I'm not saying 29"ers will be supplanted by 32"ers, but the 32"er is not going away anytime soon either. Naysayers will come and go, but once people get onboard a 32"er and find out what it can and cannot do, then the results will determine the outcome of this wheel size. And again, based upon this real-world feedback, things seem to be looking good for the 32"er. 

Nuff said..... 

Friday, January 23, 2026

We Interrupt Normal Programming For A Special Announcement!

Ride support last June
Usually you dear readers are expecting to find the weekly FN&V here. However; today is my birthday. So, apologies if you were expecting a menu of cool bicycle related news and takes. You get me instead. 

I'm in the midst of blogging my twentieth year here. I find this amazing. Had you told me when I was 45 years old that I'd still be at this I would have laughed in your face. 

Yet......here I am. 

And I've logged another ride around the Sun. I'll not hide it - this past trip had many moments I care not to repeat again. But be that as it may, I am left to move onward, and this is what I am trying to do everyday now. 

Thinking about being 65 years old is weird. I remember seeing a few older cyclists back in the 1990's and thinking it would be cool to be able to be riding bicycles yet when I get to be their age. Well.....here I am. 

Yes - it is pretty cool. I was right about the thought I had 30 years ago. Back then I had no idea. No clue what I might be doing or where I'd end up. I have to say, I'm pretty satisfied with it all. And now I am at "retirement age", whatever "retirement" is, I do not know. 

You can rest assured I do not plan on knowing what that word means yet. 

Thanks for reading Guitar Ted Productions. Have a great weekend, and keep on riding those bicycles!
 

Thursday, January 22, 2026

Thursday News And Views

Dylan Johnson's Leadville bike from 2025. (Image courtesy Johnson's social media)
Thursday News & Views? What the....!!!

(You'll see why tomorrow) 

Life Time Bans Drop Bars At Two Of The Grand Prix Events:

Last weekend news circulated on the internet concerning a new rule for Life Time Events Grand Prix series. This six event series is split between MTB and gravel events. 

Last year a few Pros and top athletes were noted trying out drop bars at the Leadville 100, traditionally seen as a MTB event. 

Now those drop bars are banned by Life Time at the Leadville event and at the penultimate event in the series, Little Sugar, in Arkansas. Perhaps Life Time is trying to preserve the half and half nature of their series by denying the usage of drop bars making the MTB events look like MTB events. Life Time stated this was being done to ensure "riders safety" and "course compatibility". Interestingly, Chequamegon is the only MTB event allowing drop bars. 

Later on it was revealed the riders of the Grand Prix asked for this ban. The thinking was the cost to have multiple bikes for specific course uses was detrimental to those in the series who could not afford a fleet of race bikes. Fair enough. Then don't say it was for "rider safety'" and then let that be the headline, because clearly this wasn't the case.  

Rider safety? Speaking of 'rider safety'....So, what about riders using their fork crowns as a grip area to get an aero advantage, even going so far as to mount remote shifters to actuate their electronic drive trains? (See 2025 women's Leadville winner, Kate Courtney)  

The miscommunication by Life Time had to be rectified by a media story later on clearing up the mess. Does this sound like a logical way to run PR for an event? I don't know, but I still think this has a lot to do with how this series upped the ante' in prize purses and how this affects perceptions of this event series. In the end, it is a small thing to most riders. And it looks silly on the part of Life Time Events. 

BMC Roadmachine One (Image courtesy of BMC Bikes)

While Gravel Tires Get Thicker, Road Bikes Creep Into Gravel Territory:

N.Y. Roll and I discussed this recently, and I think it is an underrated topic in cycling. Road bikes (All-Road Bikes?) are becoming what was once considered a "gravel bike", twelve years or so ago.  

Think about this, the |"original" gravel bike, the Salsa Warbird, which debuted for the 2012 selling season, was only able to handle a 38mm tire with adequate mud clearance. You could squeeze in a 40mm tire, but just barely.  

Contrast this with the BMC Roadmachine, a bike which can easily clear a 40mm tire with a 1X drive train, yet is considered a "road bike". (All-Road Bike?)  My prediction is these bicycles are on the cusp of becoming the next "secret weapon" in gravel racing. 

Many gravel events don't require 50mm and wider tires. Many road conditions in many places are easily ridden on bicycles with 40mm tires. If, as is suggested by the wider tire gravel pundits, the MTB-width tires on gravel are faster, why wouldn't we see this happen in pro road racing, where cobbles and yes - even gravel - sectors exist in some courses? 

Don't be surprised when you hear about some Pro gravel racer showing up on a "traditional" road bike (All-Road Bike?) at some big gravel event someday soon.  

Continental Terra Adventure Reflex (Image courtesy of Continental Tires)
Continental Releases Terra Adventure Reflex Tires:

Continental announced on Tuesday their new model in the Terra range of tires called the Terra Adventure Graphite Reflex. 

Essentially, this is a Terra Adventure tire with a reflective strip on the sidewalls. This provides better visibility to other road users in low-light and dark conditions. Perfect for the racer who lines up for a dark morning start, or for adventurers who ride in darkness many times. 

I reviewed the Terra Adventure, sans reflective stripes, in my post HERE.  

TideAce Carbon 32"er.(Image courtesy of TideAce)

The 32" Watch - TideAce Carbon 32"er Frame:

I received a tip the other day to check out this carbon frame for 32" wheels. It is from a Chinese brand called TideAce. You can see their webpage for it HERE.  

Comments: I'm not familiar with this brand but my source tells me it makes stuff for other brands you may have heard of, so this isn't some oddball product with little engineering behind it, is what my takeaway was from this.  

It was kind of funny, because my source said "Now (N.Y. Roll) will have to "eat more crow". (IYKYK) Because he said something about waiting to see if a carbon 32"er would come out later on. Well, obviously, it already has happened. 

And look at the price! My goodness, but seriously under 1K for a carbon 32"er? Ya gotta hand it to these Chinese brands, they don't sleep on a way to make a buck! 

Gravel Worlds Claims Largest Prize Purse To Be Offered In Gravel Racing:

On Wednesday, an announcement went out from Gravel Worlds which claims the event will offer the largest cash payout in gravel cycling. The $150,000.00 purse is to be fully funded through Goodlife Nutrition. 

Last year the prize purse was $100,000.00 so this is a significant increase. It should be noted this new, higher amount is to be distributed through the Pro fields, evenly between men and women. This surpasses any Life Time Event and one would assume the race will become a significantly important event now for anyone trying to make a living racing gravel. 

Also notable is Gravel Worlds now having controlled intersections for their main 150 mile event. There will also be more law enforcement present than ever before. This should alleviate any issues with regard to riders risking life and limb trying to stay ahead in the Pro fields by darting across uncontrolled intersections. Faster amateurs will also benefit as the time windows for the intersection controls do not end with the passing of the Pro fields.  
 

That's a wrap on this week! If you aren't freezing to death, getting iced over, or digging out from a snow storm, try to ride your bicycles this weekend! And thank you for reading Guitar Ted Productions! 

Wednesday, January 21, 2026

It Is "That Week" Here

I have a confession to make. I am not an indoor cyclist. I tried it several times over the years, but....... Nope! Not for me. I understand many can Zwift, spin cycle, or treadmill their way through a cold snap, but this doesn't work for me. 

You might think I am just being stubborn, or maybe that I am not trying the right thing. Yeah.......no. See, my makeup is that of an outdoors exerciser, and being indoors is excruciatingly boring and limiting to my mind. So, I'm going outside even if it is just to go around the block. 

But this is not to say I am fanatical or insane. There are times I won't go outside, because, well.......it is stupid. Like this week. It is that week we usually get every Winter here where it is just not a very good idea to be outdoors exercising. 

Now, today, for instance, it is great at 32° for a forecast high temperature. I will ride today. Today is an outlier and the best day all week to ride.  However; on Thursday through until sometime on Sunday morning, our air temperature will not get above zero for the entire stretch. That is Fahrenheit, by the way, not Celsius. Add to this the winds and well......this equals "stupid". Stupid cold weather. 

This makes writing about cycling a bit challenging some days. I guess I manage to find something to talk about though! But soon things will improve weather-wise. February brings more heat, longer days, and more riding opportunities. This is but one week where, yeah, being outdoors is extremely challenging. 

Except for today. I'll ride today. 

Tuesday, January 20, 2026

Two Things

Pinarello Grevil MX (Image courtesy of Pinarello)
Look! It's Another Adventure Bike! (Not Really)

Friday past, Pinarello introduced a bike which they claim combines the "best of both worlds" from Road and MTB into one bike - The Grevil MX. 

"Optimized for 50mm gravel  tires", according to the press release, the Grevil MX incorporates aero elements and the asymmetric frame design Pinarello utilizes on some of their other models separately, but here are brought together.

The suspension specific, drop bar specific design uses a 100mm travel fork. Pinarello President, Fausto Pinarello is quoted in the press release for this bike as follows:  

"The GREVIL MX is designed for riders who push gravel beyond its typical boundaries. It’s a very versatile bike, perfectly suited for races or adventures where you’re riding into the unknown. It can handle long climbs and rocky descents with ease and combines the feeling of a MTB with the ergonomics of a road bike. It’s a unique addition to our gravel range."

Comments: So........a skinny tire Fargo/Cutthroat? At least the design is using a "real suspension device" instead of the inadequate "gravel" suspension devices with limited travel. This part Pinarello got right. And as you can see, it does "something" to the front geometry. You may or may not agree with this "something", but physics are not going to be denied. You either go with a "real" suspension fork, or go rigid. This 40mm - 50mm suspension fork nonsense is ineffective, high maintenance for little benefit, and weighs more for little benefit. 

On the other hand, what this idea does to this bike is undeniable as well. It is a skinny tire MTB with drop bars. Calling this a "gravel bike" diffuses the term "gravel bike" to become almost meaningless. (And don't forget, I never thought the term "gravel bike" was a good idea in the first place.)

But names aside, keeping the tires in a "gravel realm" in terms of width makes this a "gravel bike"? I guess. But to me it is just a miss. Had Pinarello made the Grevil MX capable of handling 2.4" 29"er tires this would have made a lot more sense to me. Then it becomes the bike it looks like it is - an adventure bike in the mold of the Fargo/Cutthroat. 

New Podcast Episode:

Remember the "wish-list" posts from a week or so ago? (One HERE, the other HERE) Well, N.Y. Roll and I were thinking we'd riff on those for the latest Guitar Ted Podcast episode. 

There were some strong opinions voiced in this episode. Especially regarding how much there could be done to lessen the impacts on the Earth from the way the cycling industry is conducted. 

I did manage to stay away from at least one subject I could have "gone off" on. We will be seeing shortly if I will be provoked into writing about it soon. Until then, I will be keeping my peace regarding the thoughts and opinions I have. 

Anyway, if you care to listen to this newest episode, here is the link to the Spotify hosted episode. 

Of course, you can find the Guitar Ted Podcast on other podcast platforms as well. N.Y. Roll has a "vacation" planned for early February, so we should have another episode coming out soon. Man....February! Things are going by quickly. Hopefully we will have a few episodes in February which will get you stoked for the upcoming riding season. 

It will be here before we know it!

Monday, January 19, 2026

The 32" Watch: Schwalbe Tires

Schwalbe 32"er proto. (Image courtesy of Schwalbe Tires)
Schwalbe Testing 32" Tires For Future Production:

A reader of the blog recently tipped me off to news on Schwalbe's site regarding their testing and development of 32" MTB tires. 

According to the site, Schwalbe LAB has developed a radial tire which has "set a completely new benchmark for performance"

Citing more stable handling, more grip over rooty, rocky terrain, and higher cornering speeds, the results sound hauntingly familiar to the benefits of 29"er tires over 26" MTB tires.Scwhalbe also reports that their own laboratory measurements confirm 32" tires offer "measurable advantages in rolling resistance."

Image courtesy of Schwalbe Tires

Schwalbe also states, "32-inch tires are a promising technology with real and tangible advantages - across market segments and beyond purely performance focused tires." Perhaps Schwalbe is coming out with a range of tires to suit all riders across genres? Perhaps we can see gravel oriented tires as well? 

Schwalbe doesn't see any 32"er tires coming out this year, but does hint that 2027 will be the year they will release these big hoops of rubber upon the masses. Could this mean OE orders and bicycle brands developing different styles of 32" wheeled bicyles? This would make sense given the time it takes to go from prototype to a finished bicycle model.  

At any rate, this would seem to seal up the deal and make 32"ers a virtual lock to be  something we will be able to buy from many outlets within the next year, year and a half. Now all which remains to be seen is if riders will respond by actually purchasing these wagon-wheelers.  

Extra Bonus: Here is a link to a French online site featuring a 32'er the journalists designed, built, and tested in cooperation with a French MTB brand.  

Sunday, January 18, 2026

Project Fixed Gravel Buss: Ride Impressions

Still had the studded tires on here.
A week or so ago I showed you dear readers my latest project bike. A fixed gear version of my Twin Six Standard Rando v2. (LINK) Now I have ridden it quite a bit since then so I feel I can give you my impressions of how this is working out.

First off, if you have never ridden a fixed gear bike, it is a very different experience from bicycles which can coast. You most likely have no idea how much you actually do coast on a bicycle. I know I did not realize how much time I was coasting until I started riding fixed gear regularly. It is eye-opening! 

If you are curious what having to pedal every centimeter of a ride is like, you can put your bike into a bit too high a gear, keep the cadence low so you do not outrun your gear, and never stop pedaling. You'll find you instinctively coast at various points. It's crazy when you focus on this just how much the bicycle you ride lets you have these micro-rests during rides. 

However; you just cannot really understand fixed gear riding in totality until you try it. I encourage everyone to try it as it may make you better at cycling. It definitely will show you that you have muscles you are not engaging much, if at all, while riding a "normal" drive train which can coast. 

I go into all this detail because it is necessary to impart a bit of thought about what riding fixed is like so you can begin to understand my report here. 

My first few rides were during the end of all the icy patches we had around here. Studded tires were required and due to those tires, I wasn't getting a good feel for the bike. However; a thaw occurred and I replaced the studded tires with a set of 700 x 37mm Panaracer Pasela Tour Guard tires.This "woke up" the bike and finally I was able to feel what this set up really offered. 

My my! That gearing! the 39T x 16T set up is challenging and I know immediately when I am not riding flat or down hill. You can instantly feel it in the legs, and with no ability to shift or coast, you just work harder. (Or stop riding) I haven't had to stop and walk.....yet! Steep ramps up to bridges and the like are challenging though unless you carry a lot of momentum. 

Ah! And this is the key. Momentum. Keep it up and things become a LOT easier. This gear feels great at about 12mph and up, so you have to keep up a good clip to maintain this speed. However; it is all worth it when you hit an "up" which would grind you to a snail's pace at slower approach speeds. 

Going down hill is somewhat easier with this taller gear. I cannot explain it fully, but "back-pressure" on the pedals is traditionally how you'd control your descent speed on a fixed gear bicycle. (Brakeless fixed, that is) Now I do have brakes, but I typically only use them in situations where I deem them necessary. Otherwise I am controlling my speed with my legs only. 

Somehow the taller gear allows me to control down hill speeds easier. Maybe it is because I am in a part of the pedal stroke a tiny bit longer than with a lower gear which would spin faster? I don't know..... I just feel this is an easier gear ratio to control. 

I'm running the 37mm Panaracer tires at 30psi and this is probably slightly lower in this colder air than 30psi. The wide Blunt SS rims keep the tires stable, and the ride is smooth, but not draggy or slower than you'd want. This mitigates the stiff T-6 frame and keeps me happier during rides because when you are riding fixed, you just cannot level the pedals and unweight the saddle like you can do on other bikes. I can unweight the saddle a little bit, but your legs are flying around, so this gets trickier to do while riding fixed. 

The stiff frame is a boon when cranking slower cadences and it keeps the frame from twisting, which in turn keeps the drive train happy. Through axles on a fixed gear bike feel amazing and give you insurance the rear wheel is not torquing sideways or slacking the chain unexpectedly. This is very nice! 

I had one longer ride, a night time ride, on this bike. I probably had close to two hours riding time, mostly on city streets and bike paths. The bike is smooth, the gearing feels good as long as I feel comfortable enough to let it rip, and the brakes work great when needed. One thing about riding fixed is you are always working so you get in more work over a shorter period of time than you do on a coaster bike. This and the tall gear worked me out hard! So, I don't know about gravel in this current gearing. I think I'd drop a couple teeth at the minimum in the rear cog if I decide to ride gravel. I could see 39T x 18 or 19 tooth being much better. 

More when I get more time on this.... 
 

Saturday, January 17, 2026

Ride Right: A PSA

Image courtesy of the Tama County Sheriff Department
 A long time ago the Pirate Cycling League used to harp on riders participating in their Gravel Worlds events to "Ride Right". This meant more than the obvious. I was reminded of this maxim the other day when I saw a post by the Tama County Sheriff's Department showing a head-on collision between two vehicles on a gravel road. 

The vehicles were coming from opposite directions up a hill and when they crested, with both vehicles in the road's center, the head-on crash was the result. Both drivers are okay, by the way, according to reports. 

Why does this matter to gravel cyclists? 

Because, the old farmer's rule of "Drive Right" up hills was meant to help prevent crashes like this, and gravel riders would do well to also heed this advice. 

Maybe the old ways are not being passed down any longer, but I was taught to set my car on the edge of the road, as far right as possible, when cresting hills on gravel roads. Rural people, (at least they used to) expect this rule to be followed for the safety of all road users. Clearly, according to the story from the Tama County Sheriffs, this wasn't the case with the operators of these two vehicles. Perhaps even if one of the drivers was on the far right, the accident may have been avoided. 

However that goes, one thing is a solid takeaway here - You never know when you are going to meet a vehicle on gravel. I remember several examples of not even hearing a car before it was suddenly just "there" at the top of a hill. Riders cresting hills on gravel in the middle of the road or on the left side are taking a huge risk with possible consequences of death or serious injury.  

Don't be that gravel rider! Ride Right! 

Friday, January 16, 2026

Friday News And Views

A render found on Reddit. Supposedly a new Kona model

 Rumored Kona Unit Y Model Seen On Social Media:

Over the past weekend I came across a mention of a new Kona bike packing bike called the Unit Y. Searching the interwebs turned up a thread on Reddit showing the bike and what was purported to be the specs on this new model.  

Interesting details are the obviously bowed downtube and the "mullet" 29"er front/650B X 3" rear wheel with Boost 148 spaced dropouts in the back and Boost spaced front dropouts up front.  

The appears to be a ton of frame accessory mounting points and a front rack, presumably for sleeping bags/tents/luggage.  

Apparently the leaked info was on a dealer's website by mistake and was taken down later. But not before it was seen and spread around on social media.  

Comments: A wild looking bicycle, for sure! I wouldn't be too keen on the different wheel sizes here as it would mean two different sized tubes for "just in case" bail-outs. I suppose you could mitigate this by using TPU tubes. (Yes, there are TPU tubes in the correct sizes for this bike) 

Finally, I am not sure what question this bike is an answer to. Mostly based on the mullet set up. Comfort in riding usually is influenced by frame design, and with the shorter tubing used in the rear end of this bike, and with such a compact geometry for those tubes, it would seem like stiffness would be an issue. As in "too much of it". Especially since you probably are not going to get a lot of deflection from a dropper post to help ease the pain of bumpy trails. Also, panniers will be more difficult with a short rear as this bike has, although it could be argued this bike is a frame bag/seat pack bike. 

Corsa Pévélé - Image courtesy of Eddy Merckx Bikes
Eddy Merckx Bikes Offers Titanium Unpaved Road Bikes:

Today Eddy Merckx Bikes released news of two bikes in their unpaved/gravel range now offered in Columbus Hyperion tubing and featuring UDH drop outs. 

The Corsa Pévélé is the more road-ish of the two and features up to 40mm of tire clearance in a 1X drive train. The bike has top tube accessory mounts and the ability to carry three water bottles. This should prove to be a nice, long-distance road mileage machine. 

The Corsa Pévélé Ti also can be fitted with mudguards. However; there are no rack mounts. 

The Corsa Pévélé is offered in multiple drive train configurations from SRAM and Shimano. The bike can be ordered as a frame/fork combination allowing the buyer to custom build to their own specifications. 

Corsa Strasbourg Ti (Image courtesy of Eddy Merckx Bikes)
The Corsa Strasbourg is the full-on gravel model. This bike has up to 50mm of tire clearance, accessory mounts on the frame and fork, and the capability to be fitted with mudguards. 

The Corsa Strasbourg is meant for 1X drive trains only. Complete bikes can purchased with SRAM or Campagnolo 1X drive trains. This bike is also offered as a frame/fork as well. 

Furthermore; Eddy Merckx Bikes is offering customers an online configuration tool which allows riders to choose different downtube/head tube logos and Wolf Tooth components in five different colors. 

The two new titanium bikes are available from today from Eddy Merckx retailers. More details and images of the Corsa Pevele and Corsa Strasbourg bikes can be seen at www.eddymerckx.com 

Image Courtesy of SRAM
SRAM Offering Shorter Crank Lengths:

In keeping with the move to shorter crank arm lengths for racers, SRAM is now offering crank arms in their Red series from 150mm to 175mm in length. 

DUB spindles and 8 bolt spider standard is here, of course. The main news is the shorter offerings which many will be happy to see offered now from SRAM. 

Comments: The press release came out Tuesday and also featured aero TT levers with a hydraulic mechanism rather than traditional cable actuation. This probably indicates the end of caliper brake offerings across the board for road bikes in the future.  

Aero calipers were also featured in the Red and Rival ranges which feature "Stealth-a-majig" connectors  This might be a good match for those with travel bikes featuring hydraulic brakes. 

Finally a UDH hangar with a silver bolt and washer (ooo!), and a new Quick charger for batteries with a promised 60 minute recharge time were news from the press release.  

Comments: Short cranks are all the fashion now and SRAM now can offer bike fitters and those with short crank acquisition syndrome something from their ecosystem. Cool. It is quite a commitment since with this many options you never know what will be popular as a manufacturer and what you may need to focus on as far as supply goes. Hoping here that SRAM can keep supplies dialed in for those looking for an option for short crank sets from them.  

Image courtesy of SILCA
SILCA  Debuts Rim Tape, Hi-Flow Tubeless Valves:

SILCA just released some tubeless products for riders. First we have their Ultimate Rim tape, a tubeless tape offered in two widths for most applications. Claiming a residue free removal, tear-free performance, (important when changing tires), and a trilaminate construction with "just the right amount of stretch". 

The tape costs USD $24.00 a roll. 

Ultimate Tubeless Valves come in two lengths. 50mm or 70mm. SILCA claims the Ultimate Tubeless Valve stem is compatible with tire inserts and has a higher flow rate than standard valve stems. A pair of the valve stems can be had for USD $28.00 for the 50mm and USD $29.00 for the longer 70mm stems.  

Comments: The rim tape is what I'd be interested in most. The thing is, I found Tessa tape from Uline for a lot less money and it works as well or better than most branded bicycle tapes. If SILCA somehow has a tape with much better properties, than I would be all in on trying it, but for the price, it would have to be darn near miraculously better for me to switch.  

The 32" Watch: Berd Spokes Launch 32"er Lengths For Wheel Building:

Berd, the manufacturer of advanced polymer spokes in textile form have announced lengths to build 32" wheels are now available. New was reported by "Bike Rumor" on Thursday. 

Comments: High-end lightweight spokes for the 32" wheels is another indication this wheel size is legit. With tires, rims, and bicycles trickling in as news and rumors already, this trend is picking up steam quickly. 

I've said it earlier here, but look to Sea Otter to be the place this year where a lot of 32" news will break. In fact, I would not be surprised to see 32"ers being used by at least one racer in the Life Time Grand Prix kick-off event there for the 2026 season. 
 

That is a wrap for this week! Thanks for reading Guitar Ted Productions. Now get out there and ride those bicycles!  

Thursday, January 15, 2026

Some Things I Am Thinking About

I put short-ish cranks on last year.
 It's Winter. Not much of a chance for longer country rides. With the lack of snow, fat biking went out the window as well. So, I've been left with sitting around more than I'd care to and thinking. 

Dangerous activity, I know, but here are a few things I've been thinking about recently which I may or may not delve into further in 2026.  

No particular order here, just a few things I thought I'd share. 

Shorter Cranks: I've been intrigued by this idea over the past year or so. I put on a set of 170mm cranks on my Raleigh Tamland Two last year to try something out which I had not done before. 170mm may not seem "short", I understand, but this is where I was willing to start. If it was somewhat worse than 172.5mm, (my preferred gravel length up until this point), then it couldn't be that much worse. However, say I went with 165mm cranks and did not like them. Well.......

I guess so far I seem to feel a difference in a positive way running 170mm cranks. So, I could see trying 165mm cranks on a gravel bike. Thing is, I am not into 12 and 13 speed drive trains, and well..... Maybe I could set up something in 11 speed, I just have not looked that hard yet. Something I'm still thinking about.... 

Singular Albatross 32"er prototype. Image courtesy of Singular Cycles.
32'er Bikes: So, I've been interested in this entire development on the 32"er platform. Not so much from a mountain biking perspective, but from a gravel riding one.

Of course, no one else seems to be onboard with this idea, so all the prototyping and testing has been centered around off-road type equipment.  

32" seems a no-brainer from a gravel riding perspective to me though. Momentum of those bigger wheels has to be a factor in being able to carry more speed over the rollers here. Additionally the longer tire contact patch will be something which will make vibrations less, and make the bike more stable on fast, loose gravel descents. 

I know MG is getting one of these bikes to try out, and he will probably try it on gravel. I cannot wait to hear his take on this. Until then, I will be dreaming of a drop bar set up for gravel and 32"ers. 

Maybe someday....

Clik Valve
Clik Valve vs BBB CoreCap: Inflation in terms of cycling is a good thing. You know.....for your tires? I know people are keen on this subject bcause of the number of hits I got covering Clik Valve last year. 

I really like the system. It is SUPER easy to use, and otherwise is no issue at all. Yes - You have to have a proper Clik Valve pump head to enjoy all the benefits of Clik Valve. So, in this way, it is a big commitment. 

A competing valve standard has arisen promising big airflow, less clogged valves, and ease of use. It is from BBB and is called CoreCap. 

CoreCap utilizes the Schrader compatibility you already have and is a system which simply replaces a removable Presta valve core. Simple. Could be a winner. 

I can see the benefits from a tubeless user's standpoint. I do not see it as being "easier" to use, because Clik Valve is so stupidly easy to use it would take a miracle to beat it out in terms of ease of usage. However; the standard does require a change which many people will balk at. (Note: You can inflate a Clik Valve equipped tire with a standard pump. You just lose the ease of use.) 

You can read more about the BBB CoreCap on my blogging compatriot's site HERE. Muddy Moles will be testing these out soon, so keep abreast of his updates, or just visit his blog. I have it linked in the right sidebar on this page. 

That's about it from my brain dump today! More thinkering (if the Winter drags on) to come.  

Wednesday, January 14, 2026

Four Years Down The Road

Working on a 1992 Shimano shifter
This week marks my 4th year of working at the Cedar Valley Bicycle Collective. This has been an amazing job so far and I thought it might be good to tell the story of how this job has changed me and how much the Collective has changed since I've been there. 

December 2021. Andy, the owner of Andy's Bike Shop, where I had been working for a short time, told me the pandemic and how the economics of the time were crushing his ability to stay afloat. He was going to cut the cord before things got out of hand financially and so, I was out of a job. At the time I was a 60 year old man with no apparent future employment. 

I know everyone has their struggles, and maybe you are reading this and thinking this is not a big deal. I will tell you for me, it was a big deal. I had saved a bit to get through a Winter I knew I wouldn't be working, since this was how Andy had handled the Winter of '20/'21, but after the money would run out, what then? I was in a bit of a pickle.

Lots of options were considered. Worse case scenario, I could go work at a convenience store. However; I was not wanting to work customer-facing retail anymore after doing that most of my life. However; if needs be, then I was willing. Thankfully, this wasn't my course in life. 

A stop-gap money-making opportunity arose at a local moving company. I knew one of the secretaries there and she hooked me up with a "cash under the table" part timer gig helping movers there. This wasn't 'small time' moving bits and things, this was serious, big time moving. Large diesel trucks, huge wooden shipping crates, military home moves, and lots of heavy lifting. I was called up about once every two weeks to fill in when employees missed time or if they had a need for extra hands. 

Let me tell you - moving stuff is a young man's job. It was very physically demanding work, but I was glad for the pay and it helped me and my family out tremendously. Then another opportunity arose which I found out about via a friend. N.Y. Roll indicated a bicycle related job might have an opening and he encouraged me to apply. It was at a non-profit, something I had little knowledge about, but if bicycles were part of the gig, I was in. By mid-January of 2022 I had secured employment at the Collective. 

What cannot be used again gets recycled responsibly

When I started the shop was still "closed" due to the pandemic. Over the past two years before I arrived the shop had not allowed much, if any, public access. The place was a shambles as a result of previous mismanagement and carelessness due to the situation. I was tasked with a massive clean-up, rearranging, and restoring of the place to be operational and a functional contributing entity in the community. 

I guess most people would have assessed the place as having been overrun by junk. I cannot argue with the statement, as there were things being saved which not only were unnecessary for the Collective, but were things taking up huge amounts of space and making clutter. It was mind-boggling. 

There were lots of trips to the recycler, sorting, arranging, and storing of parts we were going to keep. There was a ton of organizational stuff from a programs point of view which I had to wade through, but I had a job! And it was something which was turning in a way I hadn't foreseen. 

I was finding out all about the people you just don't see in a city. The underprivileged, the forgotten, the needy, and destitute. People who lived on the margins of society. I became acquainted with several of these people. Some have become friends. Some have died and are missed. 

Then there were the immigrants, the forgotten veterans of our military, and just people in need. Transportation is critical and bicycles are cheap and readily available. Thanks to donations from the community I am able to be a part of something which helps these folks get moving, be able to get to jobs, and make appointments on time. This part of my job has been extremely gratifying and I wasn't ready for it when I took the job four years ago. 

A volunteer tear-down day where we disassemble bikes for parts and scrap.
I've been able to get volunteer days going utilizing people from the local John Deere plant to help tear down bicycles for scrap and parts harvesting. I've been able to meet a lot of nice folks through this program. I also have been able to assist children's programs by way of bicycle checks and bicycle rodeos. It's been a lot of fun.

Besides this, I have been able to visit a couple of other non-profit bicycle related shops in Ames and Des Moines, while also meeting people from other Collectives. It has been eye-opening, for sure, to have been hired four years ago by the Collective here. 

And one of the best parts is this is not retail. It makes what I am doing 100% different and far more fulfilling. This is the best job I've ever had and I look forward to working the three days I work a week. 

There is a lot more to this job than I have space or time to write about here, but this should give you all a taste of what it is I do for a job these days. I highly encourage anyone interested in this sort of effort to contact your local bicycle related non-profit and if you do not have a local one, maybe start one. It really makes a big difference in a lot of people's lives. 

Tuesday, January 13, 2026

A Look At Events For 2026

Well, it seems every year I have written up a post concerning what I am going to be planning for in terms of events for the year. A few things have changed since last year and I have a couple of things I want to accomplish before next Winter on the bike. 

Keep in mind this is a list of plans. Many times our plans do not work out. I am no exception to the rule. So, while I may have a strong desire to do the events I am about to list, it doesn't mean it will happen. 

Okay, with the disclaimer out there saying I am not 100% in charge of the future, here we go with what I have on my plate for 2026 in terms of gravel events. 

Leading up to April my goal is to just put in some decent, three to four hour rides weekly. This should get me into riding shape. I do not plan on doing any events, but I may crack off a longer ride if the weather and timing lines up. We will see. My main focus will be just getting out there. 

The "big" deal this year will hopefully be this Legends Of Gravel ride in April down in the Flint Hills of Kansas. 

Once again, in case you haven't heard of this, here is a link to a post about this ride.  

I will also add again the fact that I am not in charge of the organizing nor do I have any influence on how this ride is set up. I was asked to come, (along with certain others) so the ride is named what it is named because of this. 

Link to registration:  https://www.bikereg.com/legends-of-gravel

Once I get beyond this point in the year I have to bring focus to what the Cedar Valley Bicycle Collective is doing. May and June are the busiest months there, and extracurricular events are at their height during this point in the season for the organization. Due to these things, I am not considering any events during those times, especially since I am taking off time in April from my job there already. 

This means things like a planned bike packing trip around West Central Nebraska I was invited to are not in the cards for me. It was a nice thing to have included me in the invitation, but I just cannot leave people hanging who are depending upon my participation. Further,ore, being on a limited income, I cannot afford the time off either.  

At some point in July or August I will be doing another ride in honor of my son, Jacob Stevenson. This will get announced when I see a time window for the ride maybe in June. I want to do around a metric to maybe a full century ride on a course somewhat local to Waterloo. 

Details will be fine tuned as the Spring and Summer go along, but this is an important ride for me and I will make GT's Ride For Jacob happen. Worst case scenario is I do it alone on a weekday when I am off work, because typically Saturdays I have to work. But this is all yet to be determined. 

Then the only other thing I am committing to is the Virtual Turkey Burn Challenge in November. Other than this idea, I probably will end up doing something with N.Y. Roll at some point during the year, but we haven't had any discussions on an idea, and it remains to be seen if we do or if we do not do a ride like the Tree In The Road Ride we did last year. 

Besides those ideas, I just want to focus on getting outside, riding as much as I can, and having fun. I don't need for, want to do, or have much interest in attending the "big organized rides" like Unbound, Gravel Worlds, or Mid South again. I'd rather ride for an adventure, and in other places, than do those things over and over again. 

And that's about it. So, nothing hugely exciting here, but if I get to ride all of what I have outlined here it will be a big year of riding for me. I do not expect it all to happen though, except for the ones I have stated I really want to do, (really only a few), and if this is all I get in, well that'd be great too. 

Thanks for reading Guitar Ted Productions!

Monday, January 12, 2026

Poof! Just Like That!

Current state of the Fargo Gen I
 Since the Ride For Jacob on my Fargo Gen I, I haven't ridden the bike much. I wanted to make a couple of changes first. Now that the two main things I wanted to do have been taken care of, I can share the outcome with you all here. 

The first order of business was to swap out the 180mm XT crank set for the 175mm crank set seen in the image here. I also wanted to swap wheel and tires, but this took a strange turn recently. 

See, I did not have any tires I was jazzed about using. Plus, I thought I really wanted a fancy wheel set for this bicycle. I'd be talking about hundreds of dollars just to satisfy a whim. In other words, I could not really afford to do this just now and I did not have anything by way of tires in mind at all. 

A week ago, on Monday, a dear reader of this blog donated a bunch of items to the Cedar Valley Bicycle Collective. One of those items was a set of tires. 700c X 2.2", to be exact. A size we at the Collective would probably rarely - if ever - use in the next year or two. Instead of having these two tires just sit around taking up space, I purchased them. 

The tires? Ironically they are Rene Herse Fleecer Ridge tires in the Endurance casing. They had been used, for sure, but they were in very good condition otherwise. Now, all I needed was a wheel set. I barely have any quick release wheels anymore these days! 

But I identified a set which came on my Raleigh Tamland Two. They are not real heavy, but they are not lightweight either. Not in terms of what is out there now which one could purchase. So anyway, I set up the Fleecer Ridge tires with a WTB TPU tube in the rear and a standard butyl tube up front. Now it was time for a test ride. 

First thing I noticed was the vibrations these tires produce. I could feel it everywhere- saddle, pedals, handlebar. I set the tires up at 30psi and was riding in 40° temperatures. The Fleecers rode fast on pavement but on my gravel sections it was tough since we had an inch and a third of rain. This made the tires cut into the surface on unpaved, gravelly bits. 

I decided the unpaved areas were too soft to really get a read on the tires, so I bailed and hit the City side streets. About a mile from the house I heard a "pfffft-ssssssshhhhhheeeeeeeah.  

Poof! Just like that. A flat tire!

See anything missing here? (Check area around where the arrow is pointing)

 Okay. Great...... I cannot remember the last time I had a flat tire. Was it the tire? The TPU tube? I didn't know, but the irony of what I have said about Rene Herse tires was not lost on me in the moment. I turned around and took the walk of shame, a mile back to the house. 

Once I was home I took the wheel off, peeled back the tire, and started pulling the TPU tube out. I figured I would make a mental note of the relationship between the valve stem and the hot patch of the tire as I pulled the TPU tube out. Then suddenly I noted something. 

There was no valve stem!

Upon further investigation it was apparent the plastic valve broke off at the very bottom of the base of the TPU/valve instantaneously dumping all the air out of my tube. It was a failure of the TPU tube, not the Fleecer Ridge tires. 

Phew!

So, this was good news. Now I am not too impressed with the WTB TPU tube, I will say that. Note: There was no valve nut to force too much pressure, pulling the valve apart because the plastic valve is not threaded. This wasn't cut by the rim, because it was obvious the plastic was broken down inside that sheath you see still protruding out of the TPU material. It was an irregular, crystalline looking break. 

No, this was a failure of the material. So, a new thing for me. I've never seen anything like this before. It is but another reason I think TPU tubes need mechanically connected, aluminum threaded valve stems. I think TPU tubes are really great, and I will continue to use them, but these early efforts at TPU product are not without some growing pains. 

On the other hand, later on I remembered hearing something, (maybe a stick?) , tinkle through the rear wheel not long before the valve stem failed. Maybe whatever that was knocked the valve stem? It is a possibility, if what I heard was what I thought I heard. I did not stop or verify this, as things like this happen all the time and unless I feel resistance in the drive train I tend to let things like this go uninvestigated or at least they are of little concern. 

N.Y. Roll said to me on the phone when I was telling him this story that he was glad I was taking these chances so he could learn from my misfortunes. 

Hey! Someone has to do the testing! 

Sunday, January 11, 2026

The 32" Watch: Forks Are Coming!

Image forwarded to me. Originally from Rich Dillen
 Back when 29"ers were being developed one of the big stumbling blocks to their acceptance was the availability of suspension forks. "Real" suspension from one of the big brands like Fox or Rock Shox were seemingly vaporware. 

Yes, there were efforts by Marzocchi, White Brothers, and there were modified Manitou forks, but no "real" high performance choice existed until 2005 when Rock Shox released the Reba 29. Fox followed two years later, and then 29"ers were basically on the map to stay.  

Keep in mind 29"ers first hit bike shops in 2001/2002. The wait took a few years, but the forks eventually did come. This will seemingly not be the case for the 32" wheel. 

A reader of this blog, who himself is possibly acquiring a 32"er, sent me the image shown here of what looks like a modified Manitou fork said to fit a 32" wheel application. Ironically it was a modified Manitou fork which Gary Fisher used on an early 29"er which became famous as one of the first suspended 29'ers. 

Rich Dillen's 32"er. (Image from Dillen's social media)

 My source also told me there is a 32" Fox fork in the works as well. This means a couple of things. (1) 32"ers are a legitimate choice, at least in the short term, for an off-road bicycle. (2) It means OE brands are ordering this product to put on future 32"ers from well a well known brand or perhaps several brands. It probably also points to development of a 32"er fork from SRAM, especially if the Fox rumor is true. 

Whatever happens, it does appear there will be an accelerated timeline for 32"ers versus the 29"er and its early development. My guess? You'll see mainstream branded 32"ers by late Summer. I would bet Sea Otter will be rife with these things in April. 

Stay tuned.....