Monday, January 07, 2019

What's Up, GT?

A new fork on the Raleigh....
The end of the year business and the "State Of The Gravel Scene" posts have gobbled up all my space for recounting the day-to-day stuff around here. So, without further adieu, here's what has been happening since, or, around Christmas time.....

  • Hours cut waaaay back at work. The business climate in bicycle retail has, well.......it sucks. Not just where I work either. But suffice it to say that the purse strings were tightened and Christmas time was a frugal one at the G-Ted household.
  • 24hrs of Cumming entry: Sam, my co-conspirator in the 24hrs of Cumming last August started sending me some messages that were......cryptic. Then at the end I get a confirmation that I was in the 24hrs of Cumming and a "Merry Christmas" from Sam. This all a day ahead of registration opening, which.......I don't know how that worked. Point is, I am in with Sam. This time we will be known as "Team Snack Sabbath". 
  • 20th Anniversary: Mrs. G-Ted and I celebrated our 20th Anniversary January 2nd. Again- a frugal affair, so no big deal, but it didn't matter because our family was together.  
  • Sickness: Yep. Regular readers know I usually get sick around this time of year. Had a 24hr bug, recovered in a few days. 
  • Renegade Gents Race 9.0: April 6th. The Careless Whispers are in for their 9th time. Lets see if we can get EVERY team member to the finish on the regulation course! 
  • C.O.G. 100 Registration: Opened January 2nd. Sold out two thirds of the field within four hours and we only had a handful of spots left by the end of day one of the registration process. Sold all 75 spots in three days. Added 25 additional spots over the weekend. Pretty surprised by that, I won't lie. I figured finding 75 single speed freaks would be tougher than that.
Then this retro single speed stuff showed up.
Speaking Of Single Speed..........

I got a message between Christmas and New Years from Grannygear. He asked me if I might be interested in some single speed hubs he had, some old White Industries ENO hubs. I said yeah, and he said, no problem. Okay, so filed away for some other time.

Then on the day of my 20th wedding anniversary, I got a heavy box of pretty decent size. What? I opened it, and besides the vintage hubs, there were two Shimano square taper cranks with rings, a White Industries free wheel, two saddles from WTB, and to top it all off- the White Industries ENO freewheel tool!

Thank you, Grannygear! Wow! This is so cool. One of the cranksets is even a 180mm length! That one, a 9000 series crank, has a rare 34T Onza Buzzsaw chain ring too. The stuff needs cleaning and a touch of TLC, but hey! I ain't complainin'! First thing to do after a bit of polishing up will be to get a new set of bearings in the rear hub. Then I'll build up a wheel set for my Blackbuck rig with some rims from Velocity of some sort. Probably some Velocity Blunt SS rims. Anyway, these wheels are gonna be sweet.

That White Industries free wheel will probably end up on the Blackbuck at some point. It's a 21T or 22T job, too low for any gravel travel. The cranks...... Dunno yet. I probably will put one set on the Blackbuck and retire the ano-green Suginos I've run on there for the last ten plus years. One of the saddles is a Pure V, my favorite, so I'll have no trouble finding a home for that. The other is a well worn, possibly an OG from the 90's, WTB SST saddle. I have one and have broken my other. Good time to replace that.

So, there ya go. Some catching up, housecleaning, and whatnot from late last year till the present. Back to "regularly scheduled" postings tomorrow.

3 comments:

Rydn9ers said...

Happy anniversary!

Daniel said...

I'm interested in what you think of that Fyxation fork. I'm thinking of getting one for my Midnight Special build I'm working on.

Guitar Ted said...

@Daniel Lemke- I've only ridden it a few times. It's so hard to tell what's going on with the roads being so mushy and soft. We are supposed to freeze up tomorrow again, so perhaps I will get a better feel for this fork in the coming days. I'll be chiming in here about it when I get a better idea of what this fork can do.