Friday News And Views

The Bombtrack Arise

Bombtrack Arise Single Speed Gravel Bike:

I came across an article about the "Ten Best Single Speed/Fixed Gear Bikes" on a UK based website recently and one of their choices was this Bombtrack Arise single speed gravel bike. 

Well, it is steel, and single speed, so at least that part was right! Ha ha! You all know I have a big soft spot for single speed or fixed gear bikes that can do gravel roads. So, I checked it out, and you know what? It is something I would buy. But I really do not need it! So, no.... You won't see this bike in my posts in the future, but if I was in the market for a single speed gravel rig, this bike ticks all the boxes for me in terms of geometry. 

I would want a bit lower bottom bracket if I had my druthers, but otherwise? This is good. It's not "great" though. It is heavy-ish, the parts are pretty pedestrian, and the tire limit is 42mm. But you get spoke holders! Who does that anymore? It's also kinda expensive for a single speed, but any brand's single speed bikes tend to be, in my opinion, overpriced for what they are. Bombtrack is no exception. 

Anyway, it isn't often I find a bike that is mostly agreeable with me and single speed to boot. I just thought you all might find it interesting as well.

Logos wheels use new open standard developed by HUGI in the 90's.

Open Standard: When Exclusivity Dies, More Choices Open Up: 

In an announcement last week made by new wheel and component company, Logos, I learned that the old proprietary Star Ratchet design is now an open standard. Patents are weird things, but yeah, you only hold them for so long before the design is an "open standard" useable by anyone. I guess as long as the design isn't purchased by someone and held, (see Shimano), then things are different. 

I remember using a wheel set back in the 1990's with a Hugi free hub and it was very noticeably better than pawl/spring designs most often used then, and still to this day. Hugi used a two spring design, but when DT Swiss bought the design they went to a single spring. The advantage of using two springs is that when the hub is under torque, and the chain is basically trying to rip the free hub body off the hub shell sideways, a typical pawl/spring design will be under the possibility of 'skipping' due to distortion of the materials. The ratchet design helps eliminate the need for concentricity and therefore escapes the dreaded pawl skipping possibilities. A dual sprung design essentially is floating, which is even better in that regard.

So, I was a bit surprised to see this design in another brand's hub that wasn't a licensed design from DT Swiss. This makes me wonder, will we be seeing more companies switching to this star ratchet design now? If it is demonstrably better than a pawl/spring design, I think the answer is "Yes".

Wheels Manufacturing added colors! (Image courtesy of Wheels manufacturing)

More Ano!:

My 2015 Salsa Cycles Mukluk is in need of a new bottom bracket, (UPDATE: It's been fixed! I'll have more on that next week)  so I went a-searchin' fer one. Then I came across these colors on Wheels Manufacturing's site and was surprised. I didn't know that they were offering anodized components. 

I've had good experiences with Wheels Manufacturing bottom brackets and I have used a few in my bicycles with good success. They are reasonably priced, durable, and get the job done. I especially have liked their screw-together, Press-Fit style bottom brackets, one of which I just installed in my Twin Six Standard Rando v2. 

So, if you are looking for an anodized color and need a bottom bracket, check those out. By the way, I am not being paid, nor bribed for this recommendation. I buy my bottom brackets just like you would, at retail. So, just a friendly recommendation here. 

National Cycling League Announced:

A new criterium based league and series has been announced which will take its first start in 2023 in Miami, Florida. The league will be minority owned and run. The league will be made up of teams which will travel the country to its biggest cities to contest its events. A modest schedule has been announced but in coming years this could expand to include upwards of 20+ cities on the tour.

There will be equality in pay between men and women participating and these "teams" which will make up the series will be co-ed. The races will have separate events for men and women, but riders will accumulate points and teams will blend their accumulated men's race and women's race points to determine which co-ed teams will take home the prizes. 

A virtual component will also be a part of the series where fans can obtain data generated by the athletes and also participate virtually via a Zwift-type interface. 

An excellent story about the series with more details can be read from the "Miami Herald" online for free here. 

Comments: Older roadies may remember something like this from back in the 80's-90's. (The linked article talks about this) There have been other national criterium series as well as local and regional series which have found some success. This new venture seems a bit more focused on the "team" aspect and on tech. It'll be interesting to see how this holds up against the USAC sanctioned criteriums. 

With the saturation level of 'gravel events' being at an all-time high, it might be a good time for "something different" to find a foothold. Especially in bigger urban areas where actual gravel roads and back roads are rare and hard to find. 

Gravel Worlds This Weekend:

Today and tomorrow are the dates for the Gravel Worlds events. This year the event took on the challenge of getting 1000 women there to ride, (challenge met) and have raised awareness and increased participation for marginalized people in several groups. 

A running component was also added with a tie-in to Mid-South's running event. All this will be over by Saturday evening. It will be the largest Gravel Worlds that has been held since the event started in 2010. 

Comments: First of all: I hope that everyone involved with Gravel Worlds has a great time. I hope all are safe traveling to and from the event, and during the event I hope all stay safe and whole. All the best to the riders, and the promoters, who have toiled and put in untold hours to participate in and create this happening. Most of all- Thanks to anyone volunteering. I get it- I used to put on events like this and they do not work without volunteers.

And no- I am not going to be there for the first time since 2015, excluding the pandemic year of 2020 when the event wasn't held in Lincoln.  I also have ridden in the inaugural Gravel Worlds and one other year as well. That's a long, long run, and I needed a break. Not to mention the fact that due to my job changing again for the second time in two years which has stressed finances to the limit. So either way- I wasn't going to be able to attend. 

I'll miss seeing everyone. But that's the way of it sometimes. Ride on Pirates!

That's a wrap for this week! Have a great weekend and thanks for reading Guitar Ted Productions!

Friday News And Views

The Bombtrack Arise

Bombtrack Arise Single Speed Gravel Bike:

I came across an article about the "Ten Best Single Speed/Fixed Gear Bikes" on a UK based website recently and one of their choices was this Bombtrack Arise single speed gravel bike. 

Well, it is steel, and single speed, so at least that part was right! Ha ha! You all know I have a big soft spot for single speed or fixed gear bikes that can do gravel roads. So, I checked it out, and you know what? It is something I would buy. But I really do not need it! So, no.... You won't see this bike in my posts in the future, but if I was in the market for a single speed gravel rig, this bike ticks all the boxes for me in terms of geometry. 

I would want a bit lower bottom bracket if I had my druthers, but otherwise? This is good. It's not "great" though. It is heavy-ish, the parts are pretty pedestrian, and the tire limit is 42mm. But you get spoke holders! Who does that anymore? It's also kinda expensive for a single speed, but any brand's single speed bikes tend to be, in my opinion, overpriced for what they are. Bombtrack is no exception. 

Anyway, it isn't often I find a bike that is mostly agreeable with me and single speed to boot. I just thought you all might find it interesting as well.

Logos wheels use new open standard developed by HUGI in the 90's.

Open Standard: When Exclusivity Dies, More Choices Open Up: 

In an announcement last week made by new wheel and component company, Logos, I learned that the old proprietary Star Ratchet design is now an open standard. Patents are weird things, but yeah, you only hold them for so long before the design is an "open standard" useable by anyone. I guess as long as the design isn't purchased by someone and held, (see Shimano), then things are different. 

I remember using a wheel set back in the 1990's with a Hugi free hub and it was very noticeably better than pawl/spring designs most often used then, and still to this day. Hugi used a two spring design, but when DT Swiss bought the design they went to a single spring. The advantage of using two springs is that when the hub is under torque, and the chain is basically trying to rip the free hub body off the hub shell sideways, a typical pawl/spring design will be under the possibility of 'skipping' due to distortion of the materials. The ratchet design helps eliminate the need for concentricity and therefore escapes the dreaded pawl skipping possibilities. A dual sprung design essentially is floating, which is even better in that regard.

So, I was a bit surprised to see this design in another brand's hub that wasn't a licensed design from DT Swiss. This makes me wonder, will we be seeing more companies switching to this star ratchet design now? If it is demonstrably better than a pawl/spring design, I think the answer is "Yes".

Wheels Manufacturing added colors! (Image courtesy of Wheels manufacturing)

More Ano!:

My 2015 Salsa Cycles Mukluk is in need of a new bottom bracket, (UPDATE: It's been fixed! I'll have more on that next week)  so I went a-searchin' fer one. Then I came across these colors on Wheels Manufacturing's site and was surprised. I didn't know that they were offering anodized components. 

I've had good experiences with Wheels Manufacturing bottom brackets and I have used a few in my bicycles with good success. They are reasonably priced, durable, and get the job done. I especially have liked their screw-together, Press-Fit style bottom brackets, one of which I just installed in my Twin Six Standard Rando v2. 

So, if you are looking for an anodized color and need a bottom bracket, check those out. By the way, I am not being paid, nor bribed for this recommendation. I buy my bottom brackets just like you would, at retail. So, just a friendly recommendation here. 

National Cycling League Announced:

A new criterium based league and series has been announced which will take its first start in 2023 in Miami, Florida. The league will be minority owned and run. The league will be made up of teams which will travel the country to its biggest cities to contest its events. A modest schedule has been announced but in coming years this could expand to include upwards of 20+ cities on the tour.

There will be equality in pay between men and women participating and these "teams" which will make up the series will be co-ed. The races will have separate events for men and women, but riders will accumulate points and teams will blend their accumulated men's race and women's race points to determine which co-ed teams will take home the prizes. 

A virtual component will also be a part of the series where fans can obtain data generated by the athletes and also participate virtually via a Zwift-type interface. 

An excellent story about the series with more details can be read from the "Miami Herald" online for free here. 

Comments: Older roadies may remember something like this from back in the 80's-90's. (The linked article talks about this) There have been other national criterium series as well as local and regional series which have found some success. This new venture seems a bit more focused on the "team" aspect and on tech. It'll be interesting to see how this holds up against the USAC sanctioned criteriums. 

With the saturation level of 'gravel events' being at an all-time high, it might be a good time for "something different" to find a foothold. Especially in bigger urban areas where actual gravel roads and back roads are rare and hard to find. 

Gravel Worlds This Weekend:

Today and tomorrow are the dates for the Gravel Worlds events. This year the event took on the challenge of getting 1000 women there to ride, (challenge met) and have raised awareness and increased participation for marginalized people in several groups. 

A running component was also added with a tie-in to Mid-South's running event. All this will be over by Saturday evening. It will be the largest Gravel Worlds that has been held since the event started in 2010. 

Comments: First of all: I hope that everyone involved with Gravel Worlds has a great time. I hope all are safe traveling to and from the event, and during the event I hope all stay safe and whole. All the best to the riders, and the promoters, who have toiled and put in untold hours to participate in and create this happening. Most of all- Thanks to anyone volunteering. I get it- I used to put on events like this and they do not work without volunteers.

And no- I am not going to be there for the first time since 2015, excluding the pandemic year of 2020 when the event wasn't held in Lincoln.  I also have ridden in the inaugural Gravel Worlds and one other year as well. That's a long, long run, and I needed a break. Not to mention the fact that due to my job changing again for the second time in two years which has stressed finances to the limit. So either way- I wasn't going to be able to attend. 

I'll miss seeing everyone. But that's the way of it sometimes. Ride on Pirates!

That's a wrap for this week! Have a great weekend and thanks for reading Guitar Ted Productions!

Friday News And Views

Scope is a company from the Netherlands who make this air pressure adjusting hub.

 On-Bike Air Pressure Adjusting Hub To Debut In Paris-Roubaix:

The Dutch company, Scope, has a new hub accessory for bicycles which can adjust air pressure on the bike and give real-time read-out via Bluetooth on a computer head. 

Dubbed the "Atmoz", the system is "hub mounted" and does not alter a wheel system. A hose attached to a spoke runs from the device to a tubeless valve stem. Sensors monitor air pressure and relay the information to the rider who can adjust- up or down- the air pressure via two buttons electronically connected by wireless to the device. Apparently, it is reported that there are no moving parts, compressors, or the like in this design. Just how it works seems to be a closely guarded secret, as of now. 

That may change as a prominent Pro Road team is reportedly using the Atmoz in this weekend's Paris-Roubaix road race.Want it for your bike? Cough up $4,340.95 US and it is yours. (Not clear if that is per wheel or for both)

Comments: Correct me if I am wrong, but I could swear I've seen this idea on a fat bike somewhere before. That said, this is something that would be a prime candidate for SRAM to grab up and file under their AXS umbrella of electronic components. If that happens, don't be surprised! 

Paris-Roubaix has perennially been an event where future-tech for bicycles debuts. Think about road bike suspension like the new FOX AX StepCast fork. Or think about electronically shifted derailleurs. Those ideas appeared in Paris-Roubaix in the 90's. So, while it may not happen right away, if this idea works, I would not at all be surprised to see an add-on device for fat bikes, mountain bikes, and gravel bikes in the future.

SEIDO Spade tire

SEIDO Components And Accessory Brand Debuts:

Bombtrack Bikes, the Germanic company who are best known for adventure style bikes, are announcing a component/accessory brand for their range of bikes and available separately dubbed SEIDO. 

The range will cover everything from hardware like crank sets, wheels, and handle bars all the way to items like tires, bar tape, and saddles. 

Their debut product will be a carbon fork and they plan on releasing more things as the year progresses. 

Comments: After a quick perusal of the site I think it is fair to say that what Bombtrack is doing here is officially releasing their "in-house" component brand into the wild. Typically you don't see much of that from the cycling industry where the big exceptions to that rule are Bontrager (Trek) and Roval (Specialized). Normally those more basic, yeoman parts are only found on whatever brand of bikes they support. 

And typically a 'deeper dive' will reveal that these sorts of components and accessories are what is known in the cycling industry as 'catalog parts'. Meaning that Far East Asia companies who contract out to the cycling brands have a literal catalog of accessories and parts that any brand can have private labeled, manufactured, and installed on bikes made overseas. Those parts are then not typically made for individual sales outside of those brands. (However e-Bay, Alibaba and Amazon will net you access to such companies here) 

I'm not castigating Bombtrack, SEIDO, or the idea of this in any negative way, but I'm probably not far off the mark here. And, these parts look nice enough, honestly. But pricing is not known and no one has anything to really weigh in on quality levels, performance, and the like yet. So, this bears watching. It could be a good deal, or it might be just another 'no-big-deal' thing.

Planet Bike's Dual Blaze light.

Planet Bike Debuts New Dual Blaze Light:

LED light technology is amazing. It is a constantly changing thing, and what you could get for lights, even five years ago, is out of date today- unless you spent the big bucks on something really premium. But that's the thing- you don't have to spend the big bucks.....

Case in point: The new Planet Bike Dual Blaze light with 1500 lumen of Samsung lithium battery powered, Nichia NVSW319BT high powered LED brightness. 

Now, when I shop LED lights, I don't shop for the high-powered beam settings. Nope. I look at what 'medium' settings offer and what their run times are. 1-2 hours of blinding light is cool sounding, and maybe 'just right' for a mountain bike ride, but if I am doing a gravel ride at night, we are talking 2+ hours and most high beams are going to deplete my battery life at those ride times. So, a great lumen output at medium, with a lot of run-time 'headroom', if you will, is what I want in a light. 

And checking out the specs here on the Dual Blaze, I see it has a claimed run time of 6 hours at 800 lumen. That'll do it! But check out that claimed run time on high- 2.5 hours?! That's pretty crazy! 1500 lumen for 2 and a half hours is nuts. I cannot even think of a light that was out five years ago that would do that for $100.00. Yes- you read that right. A hundred bucks!

Now this may not have a fancy-pants interface, or the kind of run time indicators some lights have. Nor does it have the feature of being able to be controlled from a computer head, or app. But hey! For a hundy, that seems like quite a good value on a light that would likely be too bright on high for many gravel travelers. 800 lumen is plenty! 

Sea Otter 2022:

While I have not been to Sea Otter since 2009, I have had the pleasure of seeing it through the eyes of my friend from SoCal, Grannygear, many a year since. However; even he stopped going about five years ago, and of course, the last two years it wasn't possible anyway.

So, with the way things are now, the reunion-of-sorts at Sea Otter took place and I- once again- was able to see the festival through Grannygear's eyes. (RidingGravel.com report here)

Grannygear pretty much was taken most by the Turner Bikes Cyclosys titanium frame and I must say, I agree. With a 71° head angle and 73mm bottom bracket drop matched up with a 430mm chain stay length, it seems to be right in my wheel house. And, of course, it is a titanium frame. 

While it only has clearance for up to a claimed 45mm tire, that's plenty for my needs in most cases, and I have other bikes that would go beyond there, so I would be okay with that. $2600.00 sounds about right these days for a quality made, low production number titanium framed bike. While I am sure I could find something similar, we're talking what was at Sea Otter, and I think I'm with Grannygear here- That would be the bike I would have come home with from this year's show.

That's a wrap on this week! Stay warm and Have a Blessed Easter if you observe that day.

Friday News And Views

Scope is a company from the Netherlands who make this air pressure adjusting hub.

 On-Bike Air Pressure Adjusting Hub To Debut In Paris-Roubaix:

The Dutch company, Scope, has a new hub accessory for bicycles which can adjust air pressure on the bike and give real-time read-out via Bluetooth on a computer head. 

Dubbed the "Atmoz", the system is "hub mounted" and does not alter a wheel system. A hose attached to a spoke runs from the device to a tubeless valve stem. Sensors monitor air pressure and relay the information to the rider who can adjust- up or down- the air pressure via two buttons electronically connected by wireless to the device. Apparently, it is reported that there are no moving parts, compressors, or the like in this design. Just how it works seems to be a closely guarded secret, as of now. 

That may change as a prominent Pro Road team is reportedly using the Atmoz in this weekend's Paris-Roubaix road race.Want it for your bike? Cough up $4,340.95 US and it is yours. (Not clear if that is per wheel or for both)

Comments: Correct me if I am wrong, but I could swear I've seen this idea on a fat bike somewhere before. That said, this is something that would be a prime candidate for SRAM to grab up and file under their AXS umbrella of electronic components. If that happens, don't be surprised! 

Paris-Roubaix has perennially been an event where future-tech for bicycles debuts. Think about road bike suspension like the new FOX AX StepCast fork. Or think about electronically shifted derailleurs. Those ideas appeared in Paris-Roubaix in the 90's. So, while it may not happen right away, if this idea works, I would not at all be surprised to see an add-on device for fat bikes, mountain bikes, and gravel bikes in the future.

SEIDO Spade tire

SEIDO Components And Accessory Brand Debuts:

Bombtrack Bikes, the Germanic company who are best known for adventure style bikes, are announcing a component/accessory brand for their range of bikes and available separately dubbed SEIDO. 

The range will cover everything from hardware like crank sets, wheels, and handle bars all the way to items like tires, bar tape, and saddles. 

Their debut product will be a carbon fork and they plan on releasing more things as the year progresses. 

Comments: After a quick perusal of the site I think it is fair to say that what Bombtrack is doing here is officially releasing their "in-house" component brand into the wild. Typically you don't see much of that from the cycling industry where the big exceptions to that rule are Bontrager (Trek) and Roval (Specialized). Normally those more basic, yeoman parts are only found on whatever brand of bikes they support. 

And typically a 'deeper dive' will reveal that these sorts of components and accessories are what is known in the cycling industry as 'catalog parts'. Meaning that Far East Asia companies who contract out to the cycling brands have a literal catalog of accessories and parts that any brand can have private labeled, manufactured, and installed on bikes made overseas. Those parts are then not typically made for individual sales outside of those brands. (However e-Bay, Alibaba and Amazon will net you access to such companies here) 

I'm not castigating Bombtrack, SEIDO, or the idea of this in any negative way, but I'm probably not far off the mark here. And, these parts look nice enough, honestly. But pricing is not known and no one has anything to really weigh in on quality levels, performance, and the like yet. So, this bears watching. It could be a good deal, or it might be just another 'no-big-deal' thing.

Planet Bike's Dual Blaze light.

Planet Bike Debuts New Dual Blaze Light:

LED light technology is amazing. It is a constantly changing thing, and what you could get for lights, even five years ago, is out of date today- unless you spent the big bucks on something really premium. But that's the thing- you don't have to spend the big bucks.....

Case in point: The new Planet Bike Dual Blaze light with 1500 lumen of Samsung lithium battery powered, Nichia NVSW319BT high powered LED brightness. 

Now, when I shop LED lights, I don't shop for the high-powered beam settings. Nope. I look at what 'medium' settings offer and what their run times are. 1-2 hours of blinding light is cool sounding, and maybe 'just right' for a mountain bike ride, but if I am doing a gravel ride at night, we are talking 2+ hours and most high beams are going to deplete my battery life at those ride times. So, a great lumen output at medium, with a lot of run-time 'headroom', if you will, is what I want in a light. 

And checking out the specs here on the Dual Blaze, I see it has a claimed run time of 6 hours at 800 lumen. That'll do it! But check out that claimed run time on high- 2.5 hours?! That's pretty crazy! 1500 lumen for 2 and a half hours is nuts. I cannot even think of a light that was out five years ago that would do that for $100.00. Yes- you read that right. A hundred bucks!

Now this may not have a fancy-pants interface, or the kind of run time indicators some lights have. Nor does it have the feature of being able to be controlled from a computer head, or app. But hey! For a hundy, that seems like quite a good value on a light that would likely be too bright on high for many gravel travelers. 800 lumen is plenty! 

Sea Otter 2022:

While I have not been to Sea Otter since 2009, I have had the pleasure of seeing it through the eyes of my friend from SoCal, Grannygear, many a year since. However; even he stopped going about five years ago, and of course, the last two years it wasn't possible anyway.

So, with the way things are now, the reunion-of-sorts at Sea Otter took place and I- once again- was able to see the festival through Grannygear's eyes. (RidingGravel.com report here)

Grannygear pretty much was taken most by the Turner Bikes Cyclosys titanium frame and I must say, I agree. With a 71° head angle and 73mm bottom bracket drop matched up with a 430mm chain stay length, it seems to be right in my wheel house. And, of course, it is a titanium frame. 

While it only has clearance for up to a claimed 45mm tire, that's plenty for my needs in most cases, and I have other bikes that would go beyond there, so I would be okay with that. $2600.00 sounds about right these days for a quality made, low production number titanium framed bike. While I am sure I could find something similar, we're talking what was at Sea Otter, and I think I'm with Grannygear here- That would be the bike I would have come home with from this year's show.

That's a wrap on this week! Stay warm and Have a Blessed Easter if you observe that day.