Sunday, September 15, 2013

3GR Report: Chilly

3 Amigos
Hmmm......rather chilly weather has arrived now. Fall? Could be, but there is still time for a warm spell to strike. We'll see.... In the meantime, it was in the upper 40's when I awoke yesterday. That's a far cry from last week's hot, humid weather.

I was rested and ready though. I had dug out my knickers, wool socks, and a wool cycling jersey. I was warm as I was starting out for the meeting place. I was expecting a couple of riders for sure, and maybe two others. Mike and Craig were confirmed, but maybe Dave from last week, or Brian, or Tony would show up. Maybe.

Turns out the Craig was at the lot already when I had gotten there. We chatted as he pulled his rig out and started kitting up. The phone rang and it was Mike. Running late, was the word, but he would meet us North of town. Craig and I waited a minute or two past the start time, but no one else showed up. Guess it would be a trio then.

Wispy clouds and browning greenery
Lots of jet contrails and a horse in the ditch
The wind was out of the South at the start, but wasn't too big of a deal. However; it was increasing in intensity as we rode along, which we didn't notice at first, as we were motoring on Northward. That left turn West made us acutely aware of it though, and suddenly the trip back around the other side of the loop loomed larger.

There were a lot of wispy clouds in the sky, and a lot of jet contrails. Iowa is underneath a lot of flight paths for commercial and military flights, so this isn't unusual. The past observance of Patriot Day, (9-11), reminded me of that time when there were no airplane flights allowed. The skies were brilliant blue for several days then, and I remember how odd it was to not see the streaks of white in the sky. A throwback to a time I am unfamiliar with, and likely not to witness again in my lifetime.

We were also seeing a ton of car traffic on this particular 3GR. I figure that we had more cars and trucks on this single ride than we have had in all the other 3GR's this year combined. I cannot pinpoint why this would be, but all of us noted it and were puzzled. Even the blacktop highways we crossed seemed to be teaming with car and truck traffic.

My new favorite stretch of 3GR route
When we turned South it was apparent that the wind was a factor now. Not much coasting down the backside of the rollers, and with the wash-boarded road we were hitting, climbing up the rollers was harder into this wind.

I don't know why, but lately I have come to attack this part of the course. I buckled down and cranked up the first roller and I ended up out front. I could still hear Mike and Craig chatting though, and as I was going into the wind, I knew that they had to be right there behind me.

Then another roller. Their chatting grew less easy to hear. I am not sure if it was that big of a deal, since Mike and Craig could have powered away from me at any point they wanted to, but once I crested the tallest roller and hit the longer down hill section, I turned and could not see them behind me, at least not very close behind me. I cranked along a bit more, then as the corner drew nigh, I sat up. Mike rolled up just then, and in a bit of a snarky tone exclaimed, "You like that section, don't you?" I suppose it shows!

Mike usually diverts back home from this point, but he continued on with us as his wife was out of town and he didn't have a pressing schedule. It was nice to have him continue on through the entire course with us.

A Dragonfly freeloader!
Along the way we came up with an idea, (which I will share in detail later), and we didn't say much going Southward due to the now increased wind. It had ratcheted up even more and we were pushing harder just to crest the rollers and keep up the pace as best we could.

Once we got back to the parking lot we chatted for a bit and then I swung a leg over my Black Mountain Cycles bike and cruised slowly back home. I was tired, hungry, and dirty, but it was a great ride, and the day turned out to be a gloriously warm, sunny, albeit windy one. I got home and found that a dragonfly Mike had pointed out to me on my knee at the parking lot had gotten a free ride all the way home. I kicked him off outside and went in to say hello to my waiting family.

3GR Report: Chilly

3 Amigos
Hmmm......rather chilly weather has arrived now. Fall? Could be, but there is still time for a warm spell to strike. We'll see.... In the meantime, it was in the upper 40's when I awoke yesterday. That's a far cry from last week's hot, humid weather.

I was rested and ready though. I had dug out my knickers, wool socks, and a wool cycling jersey. I was warm as I was starting out for the meeting place. I was expecting a couple of riders for sure, and maybe two others. Mike and Craig were confirmed, but maybe Dave from last week, or Brian, or Tony would show up. Maybe.

Turns out the Craig was at the lot already when I had gotten there. We chatted as he pulled his rig out and started kitting up. The phone rang and it was Mike. Running late, was the word, but he would meet us North of town. Craig and I waited a minute or two past the start time, but no one else showed up. Guess it would be a trio then.

Wispy clouds and browning greenery
Lots of jet contrails and a horse in the ditch
The wind was out of the South at the start, but wasn't too big of a deal. However; it was increasing in intensity as we rode along, which we didn't notice at first, as we were motoring on Northward. That left turn West made us acutely aware of it though, and suddenly the trip back around the other side of the loop loomed larger.

There were a lot of wispy clouds in the sky, and a lot of jet contrails. Iowa is underneath a lot of flight paths for commercial and military flights, so this isn't unusual. The past observance of Patriot Day, (9-11), reminded me of that time when there were no airplane flights allowed. The skies were brilliant blue for several days then, and I remember how odd it was to not see the streaks of white in the sky. A throwback to a time I am unfamiliar with, and likely not to witness again in my lifetime.

We were also seeing a ton of car traffic on this particular 3GR. I figure that we had more cars and trucks on this single ride than we have had in all the other 3GR's this year combined. I cannot pinpoint why this would be, but all of us noted it and were puzzled. Even the blacktop highways we crossed seemed to be teaming with car and truck traffic.

My new favorite stretch of 3GR route
When we turned South it was apparent that the wind was a factor now. Not much coasting down the backside of the rollers, and with the wash-boarded road we were hitting, climbing up the rollers was harder into this wind.

I don't know why, but lately I have come to attack this part of the course. I buckled down and cranked up the first roller and I ended up out front. I could still hear Mike and Craig chatting though, and as I was going into the wind, I knew that they had to be right there behind me.

Then another roller. Their chatting grew less easy to hear. I am not sure if it was that big of a deal, since Mike and Craig could have powered away from me at any point they wanted to, but once I crested the tallest roller and hit the longer down hill section, I turned and could not see them behind me, at least not very close behind me. I cranked along a bit more, then as the corner drew nigh, I sat up. Mike rolled up just then, and in a bit of a snarky tone exclaimed, "You like that section, don't you?" I suppose it shows!

Mike usually diverts back home from this point, but he continued on with us as his wife was out of town and he didn't have a pressing schedule. It was nice to have him continue on through the entire course with us.

A Dragonfly freeloader!
Along the way we came up with an idea, (which I will share in detail later), and we didn't say much going Southward due to the now increased wind. It had ratcheted up even more and we were pushing harder just to crest the rollers and keep up the pace as best we could.

Once we got back to the parking lot we chatted for a bit and then I swung a leg over my Black Mountain Cycles bike and cruised slowly back home. I was tired, hungry, and dirty, but it was a great ride, and the day turned out to be a gloriously warm, sunny, albeit windy one. I got home and found that a dragonfly Mike had pointed out to me on my knee at the parking lot had gotten a free ride all the way home. I kicked him off outside and went in to say hello to my waiting family.

Saturday, September 14, 2013

Trans Iowa: Ten Years Of Tales #2

In mid-November, the idea of Trans Iowa was hatched. The year was 2004. In the ten years since then there have been many stories and memories. These posts will tell of the most prominent ones to my mind. Maybe I'll even spill the beans on some things you never knew....

I'd never heard of a "B Road" until we did recon for V1
Of course, with the announcement of Trans Iowa, (later known as "V1"), we had to get a lot of work done. I didn't really know just what that would mean, but I was enthusiastic and ready to dive in and do whatever Jeff wanted me to do. At first, that was to come up with a route.

Since we weren't using paved roads, an Iowa road map, (like the kind you used to have in the glove box before you had GPS- remember those?), wasn't going to cut it. I needed a map with all the roads on it. A quick search led me to DeLorme's Atlas for Iowa. It looked really good and had a lot of detail. I laid out the entire route using this resource and Jeff and I set out one cold,overcast weekend to see what we were going to be dealing with.  

First off, getting up to Northwest Iowa is a pain in the butt! There isn't a good, direct, or fast way to get to Hawarden, which was our preferred starting point. It was something like a 5-6 hour drive to get out there, and then we turned around to research our route. So yeah......we got a late start! Fortunately we had Jeff's parents waiting for us about 127 miles away in Algona, where we planned on eating and sleeping for the night before reconning the Eastern half and going home.

Things were going great. Jeff drove while I handled writing down the mileages he called out at turns that I called out from the route plan. Then after about an hour, we ran into a truncated road. What? The Delorme's Atlas showed it.......aw crap! We sat and figured and did maths and scratched our heads. Remember- we were basing the mileage off a Mazda 3's odometer! 

But that wasn't all. We ran into these "minimum maintenance roads". Weird! I'd never seen, nor heard about one. Was this really a road, or were we trespassing on some dirt pathway etched into a cornfield? I couldn't tell. I felt like an outlaw though!  

Of course, we drove it, and the two others we came across. It was obvious that the usefulness of the DeLorme's Atlas was limited for our intents and purposes. In the future, I used and relied on other sources, but to find out that a "current" map wasn't accurate in 2005? That was quite surprising to me. But that wouldn't be my last surprise, or thing I learned from Trans Iowa!

To close out today's memories, I wanted to share this early post that was done on Jeff's blog before the first Trans Iowa. It concerns the infamous gnomes I set out on the T.I.V1 course, and the first hints about the Dirty Kanza 200. (Which was called the Flint Hills 200 early on)  At the time, I was guest posting on Jeff's blog. I hadn't started this one yet!

  A quick post to let all you loyal blog readers know that I have located some PERFECT GNOMES to be used as course "re-assurance" markers for Trans Iowa! I can't let on any details just yet, but you'll find out! Also- news is rumbling about the "copy-cat" event to Trans Iowa. Looks like it's going to happen. A representative of that double-triple secret event is going to attend Trans Iowa as an "observer". We better do a good job then! That way you nut-jobs can suffer crossing a yet-to-be-named state besides Iowa! Stay tuned for more updates as they become available!!!!- Guitar Ted

Note that I wrote" crossing a yet-to-be-named state...". That's right- the Dirty Kanza was first envisioned as a cross Kansas event. However; they settled on the loop format, and the rest is history. 

Trans Iowa: Ten Years Of Tales #2

In mid-November, the idea of Trans Iowa was hatched. The year was 2004. In the ten years since then there have been many stories and memories. These posts will tell of the most prominent ones to my mind. Maybe I'll even spill the beans on some things you never knew....

I'd never heard of a "B Road" until we did recon for V1
Of course, with the announcement of Trans Iowa, (later known as "V1"), we had to get a lot of work done. I didn't really know just what that would mean, but I was enthusiastic and ready to dive in and do whatever Jeff wanted me to do. At first, that was to come up with a route.

Since we weren't using paved roads, an Iowa road map, (like the kind you used to have in the glove box before you had GPS- remember those?), wasn't going to cut it. I needed a map with all the roads on it. A quick search led me to DeLorme's Atlas for Iowa. It looked really good and had a lot of detail. I laid out the entire route using this resource and Jeff and I set out one cold,overcast weekend to see what we were going to be dealing with.  

First off, getting up to Northwest Iowa is a pain in the butt! There isn't a good, direct, or fast way to get to Hawarden, which was our preferred starting point. It was something like a 5-6 hour drive to get out there, and then we turned around to research our route. So yeah......we got a late start! Fortunately we had Jeff's parents waiting for us about 127 miles away in Algona, where we planned on eating and sleeping for the night before reconning the Eastern half and going home.

Things were going great. Jeff drove while I handled writing down the mileages he called out at turns that I called out from the route plan. Then after about an hour, we ran into a truncated road. What? The Delorme's Atlas showed it.......aw crap! We sat and figured and did maths and scratched our heads. Remember- we were basing the mileage off a Mazda 3's odometer! 

But that wasn't all. We ran into these "minimum maintenance roads". Weird! I'd never seen, nor heard about one. Was this really a road, or were we trespassing on some dirt pathway etched into a cornfield? I couldn't tell. I felt like an outlaw though!  

Of course, we drove it, and the two others we came across. It was obvious that the usefulness of the DeLorme's Atlas was limited for our intents and purposes. In the future, I used and relied on other sources, but to find out that a "current" map wasn't accurate in 2005? That was quite surprising to me. But that wouldn't be my last surprise, or thing I learned from Trans Iowa!

To close out today's memories, I wanted to share this early post that was done on Jeff's blog before the first Trans Iowa. It concerns the infamous gnomes I set out on the T.I.V1 course, and the first hints about the Dirty Kanza 200. (Which was called the Flint Hills 200 early on)  At the time, I was guest posting on Jeff's blog. I hadn't started this one yet!

  A quick post to let all you loyal blog readers know that I have located some PERFECT GNOMES to be used as course "re-assurance" markers for Trans Iowa! I can't let on any details just yet, but you'll find out! Also- news is rumbling about the "copy-cat" event to Trans Iowa. Looks like it's going to happen. A representative of that double-triple secret event is going to attend Trans Iowa as an "observer". We better do a good job then! That way you nut-jobs can suffer crossing a yet-to-be-named state besides Iowa! Stay tuned for more updates as they become available!!!!- Guitar Ted

Note that I wrote" crossing a yet-to-be-named state...". That's right- the Dirty Kanza was first envisioned as a cross Kansas event. However; they settled on the loop format, and the rest is history. 

Friday, September 13, 2013

Friday News And Views

With the end of the week at hand, I am heavily into "Interbike Mode", as I leave to attend the show Sunday. Here is a Special Rant Edition of Friday News & Views based on the coming show and trends. Enjoy!

NOTE: Large doses of "my opinion" will be handed out in gloppy dollops today. You've been forewarned.....

Just call it a "gravel grinder" and it'll sell!
 A bit of back story is in order for today's post. This Interbike, you are going to hear a lot about "gravel grinder bikes", or bikes designed for such, or good for that activity. On the surface of it, you'd think I would be pleased to announce this. Well, I am not. I am actually a bit annoyed by it. Here's why....

Several years ago I started talking about what I thought would make a good bike for gravel riding. Remember- most folks were of the mind that cyclo cross bikes were all we needed. (Many still hold to this idea to this day.) Many would say, whatever bike you ride on gravel is a "gravel grinder bike". You do not need a specialized bike for this. (Said as they roll away on their very specialized road, mountain, or urban bike that has been sub-divided into so many categories of specialties that I cannot keep count.) Whatever.... These people are not using their noggins. Anyway....

I began to discern, dissect, and theorize on what it would take to get optimal performance from a bicycle on gravel roads. I asked trusted friends what they thought, and I bounced ideas off of some industry acquaintances. I was going to pursue the custom bike angle, because, you know, why on Earth would anyone else even care about this? 

Along the way, a very bright and talented man I know also got the bug to do a custom design like this and he coined the idea we had "fat road". (Others have also used this terminology, we laid no claim to being original!) I liked it because it wasn't so specific as to exclude use on "any road". That's inclusive. That's getting a broader, more versatile mindset about this sort of design than "gravel grinder bike". But for convenience of conversation, I continued to use that term out of the thought that this wouldn't get anywhere anyway.

Something truly different.....
But I was wrong. The terminology and idea of such a bike took root and got sucked into the vernacular of the cycling industry and the next thing I know, and that I see, is a bicycle that comes out here and one over there that is a "gravel bike" in CX clothing. What? 

Yes, the marketing wonks are rebadging CX geometry and  calling the bikes "gravel grinders". Even the very few bikes that are truly different from CX bikes and would do well on gravel, (or I should say, "better on gravel"), are called gravel grinder bikes. Why? Because gravel road riding really is catching on, which is cool, and the marketing guys want their business, which is alright, but the "snake oil" is getting deep and it stinks of "nothing new here". At least in some aspects of the ploys I have seen of late.

So- first of all, calling these bikes, (even if they are different), "gravel grinder bikes" is completely wrong. Here's why: What do you think of when I say "snow bike"? Okay? That conjures up a certain image- maybe of a cold, windy, snowy landscape where you would be shivering, uncomfortable, and rather be snuggling in with a significant other and, well......you get the picture! You don't ride in snow so why bother with a bike that does that, right? Now call it a "fat bike". What does that do to the previous image? It is a completely different way to think about a fat tired, all terrain bicycle, isn't it?

Calling these new, all road capable, "go anywhere there is a path that resembles a road" bicycles "Gravel Grinders" does the same thing that calling a fat bike a "snow bike" does to those wonderful, fun, capable machines. It pigeon holes them into a certain mindset that discounts them as a possibility for anyone looking for a road bike that can do anything.

....or a rebadged CX bike.
And even worse, just tweaking a basic CX design isn't doing a "gravel grinder" bike. Not in my opinion. Yes- a cyclo cross bike does a fine job of cruising gravel. However, there is a better way to do it, just like a road bike is a better way to do pavement riding than using a cyclo cross bike. See? For sure we don't need a "gravel specific" bicycle, but you don't "need" a road specific bicycle either. However; it is nice that you have that choice.

So when you read about all the "gravel grinder" stuff coming out of Interbike, just be wary. Just like you should be wary of all the 27.5"er and fat bike conversations you'll be reading about. There is a lot of marketing "hoo-hah" swirling around these facets of cycling and the industry is pushing hard for "the next big thing" since 29"ers are milked out now.

I will be commenting and reporting on my thoughts about Interbike 2013 and what I see as trends there on this blog and on Mountain Bike Radio over the coming days and weeks. Stay tuned.....

3GR: Yes- there will be a 3GR Saturday at 8:30am at the starting point of Gates Swimming Pool parking lot in Waterloo. (The construction on the highway is ongoing, so plan accordingly.)  See you there!

Have a great weekend and Ride Your Bicycles!

Friday News And Views

With the end of the week at hand, I am heavily into "Interbike Mode", as I leave to attend the show Sunday. Here is a Special Rant Edition of Friday News & Views based on the coming show and trends. Enjoy!

NOTE: Large doses of "my opinion" will be handed out in gloppy dollops today. You've been forewarned.....

Just call it a "gravel grinder" and it'll sell!
 A bit of back story is in order for today's post. This Interbike, you are going to hear a lot about "gravel grinder bikes", or bikes designed for such, or good for that activity. On the surface of it, you'd think I would be pleased to announce this. Well, I am not. I am actually a bit annoyed by it. Here's why....

Several years ago I started talking about what I thought would make a good bike for gravel riding. Remember- most folks were of the mind that cyclo cross bikes were all we needed. (Many still hold to this idea to this day.) Many would say, whatever bike you ride on gravel is a "gravel grinder bike". You do not need a specialized bike for this. (Said as they roll away on their very specialized road, mountain, or urban bike that has been sub-divided into so many categories of specialties that I cannot keep count.) Whatever.... These people are not using their noggins. Anyway....

I began to discern, dissect, and theorize on what it would take to get optimal performance from a bicycle on gravel roads. I asked trusted friends what they thought, and I bounced ideas off of some industry acquaintances. I was going to pursue the custom bike angle, because, you know, why on Earth would anyone else even care about this? 

Along the way, a very bright and talented man I know also got the bug to do a custom design like this and he coined the idea we had "fat road". (Others have also used this terminology, we laid no claim to being original!) I liked it because it wasn't so specific as to exclude use on "any road". That's inclusive. That's getting a broader, more versatile mindset about this sort of design than "gravel grinder bike". But for convenience of conversation, I continued to use that term out of the thought that this wouldn't get anywhere anyway.

Something truly different.....
But I was wrong. The terminology and idea of such a bike took root and got sucked into the vernacular of the cycling industry and the next thing I know, and that I see, is a bicycle that comes out here and one over there that is a "gravel bike" in CX clothing. What? 

Yes, the marketing wonks are rebadging CX geometry and  calling the bikes "gravel grinders". Even the very few bikes that are truly different from CX bikes and would do well on gravel, (or I should say, "better on gravel"), are called gravel grinder bikes. Why? Because gravel road riding really is catching on, which is cool, and the marketing guys want their business, which is alright, but the "snake oil" is getting deep and it stinks of "nothing new here". At least in some aspects of the ploys I have seen of late.

So- first of all, calling these bikes, (even if they are different), "gravel grinder bikes" is completely wrong. Here's why: What do you think of when I say "snow bike"? Okay? That conjures up a certain image- maybe of a cold, windy, snowy landscape where you would be shivering, uncomfortable, and rather be snuggling in with a significant other and, well......you get the picture! You don't ride in snow so why bother with a bike that does that, right? Now call it a "fat bike". What does that do to the previous image? It is a completely different way to think about a fat tired, all terrain bicycle, isn't it?

Calling these new, all road capable, "go anywhere there is a path that resembles a road" bicycles "Gravel Grinders" does the same thing that calling a fat bike a "snow bike" does to those wonderful, fun, capable machines. It pigeon holes them into a certain mindset that discounts them as a possibility for anyone looking for a road bike that can do anything.

....or a rebadged CX bike.
And even worse, just tweaking a basic CX design isn't doing a "gravel grinder" bike. Not in my opinion. Yes- a cyclo cross bike does a fine job of cruising gravel. However, there is a better way to do it, just like a road bike is a better way to do pavement riding than using a cyclo cross bike. See? For sure we don't need a "gravel specific" bicycle, but you don't "need" a road specific bicycle either. However; it is nice that you have that choice.

So when you read about all the "gravel grinder" stuff coming out of Interbike, just be wary. Just like you should be wary of all the 27.5"er and fat bike conversations you'll be reading about. There is a lot of marketing "hoo-hah" swirling around these facets of cycling and the industry is pushing hard for "the next big thing" since 29"ers are milked out now.

I will be commenting and reporting on my thoughts about Interbike 2013 and what I see as trends there on this blog and on Mountain Bike Radio over the coming days and weeks. Stay tuned.....

3GR: Yes- there will be a 3GR Saturday at 8:30am at the starting point of Gates Swimming Pool parking lot in Waterloo. (The construction on the highway is ongoing, so plan accordingly.)  See you there!

Have a great weekend and Ride Your Bicycles!

Thursday, September 12, 2013

Cars vs Bikes

The recent dry spell has made it look like an early Fall.
Okay....I know I am "preaching to the choir" here, but hear me out. I just had a day where the whole car vs bike thing was thrust at me in a rude and pointed way via a problem with Mrs. Guitar Ted's vehicle.

It would seem that her vehicle, a Toyota SUV, has developed a situation where it didn't want to idle properly and it would die, but it would restart. Being the non-mechanical half of the marriage, she blithely would just restart it and get on with her day. Of course, at first it was only occasional. But recently it got to the point where she'd had enough, and finally told me about it.

I know some folks out there are wagging their heads, but there are people that just are not "in tune" with mechanical things. I am intimately "in tune" with such devices. Hand me something digital though, and I can be lost in a sea of confusion. A car? I am so far gone that I can not listen to the radio or music because I need to hear the motor, listen to the transmission, and feel the road. In fact there is a hole in my truck's muffler and I like it better because it's louder and easier to tell what the motor is doing.

I am a bit odd in that way. But I digress......The car. The problem- It was a sensor issue, of course, and the two that control the air/fuel mixture for the engine. If that is off, well, it won't run right. Ours was going too "rich". Anyway, it is a four figure repair bill. That's a lot of money!

Peaceful
I took the vehicle over to the repair shop, at least 7 miles away, and had to "two-foot" it to get it there, but I am adept at such things. Before I left, I loaded up the Inbred and used that as my escape vehicle after dropping the Toyota off. It was a "night & day" experience.

The drive over, slightly stressed about the possibility of it dying on the way. Then the possibility of an expensive repair. Flip side- The ride home on a silent single speed, woods, quiet, and peace. A slowing down.

Then I thought about repair costs. Wow. Suddenly a ten speed chain, ten speed cassette , and a a couple chain rings do not seem like a big deal. Plus, I can count the number of times I have thought a drive in a car was "fun" on both my hands. Fun on a bicycle? I couldn't give you any idea what number of times that has happened. Multiple times per ride times what? Probably billions of times. How many times do you get stressed out by your bicycle ride? How about driving a car? See?

Seriously, we cyclists have a secret. Or do we? Most folks bitch and yell at us and want us to die and actually help us along that path at times, but maybe that is because of what we represent. Freedom from stress, expenses, freedom from the fast paced life. Maybe we have "real life", not some manufactured experience in a steel, plastic, and rubber cage on wheels. Maybe they do get it inherently. Maybe not.....

Whatever- I am glad I have my bicycles, and that I can ride them yet. Yesterday made me appreciate that even more so.

Cars vs Bikes

The recent dry spell has made it look like an early Fall.
Okay....I know I am "preaching to the choir" here, but hear me out. I just had a day where the whole car vs bike thing was thrust at me in a rude and pointed way via a problem with Mrs. Guitar Ted's vehicle.

It would seem that her vehicle, a Toyota SUV, has developed a situation where it didn't want to idle properly and it would die, but it would restart. Being the non-mechanical half of the marriage, she blithely would just restart it and get on with her day. Of course, at first it was only occasional. But recently it got to the point where she'd had enough, and finally told me about it.

I know some folks out there are wagging their heads, but there are people that just are not "in tune" with mechanical things. I am intimately "in tune" with such devices. Hand me something digital though, and I can be lost in a sea of confusion. A car? I am so far gone that I can not listen to the radio or music because I need to hear the motor, listen to the transmission, and feel the road. In fact there is a hole in my truck's muffler and I like it better because it's louder and easier to tell what the motor is doing.

I am a bit odd in that way. But I digress......The car. The problem- It was a sensor issue, of course, and the two that control the air/fuel mixture for the engine. If that is off, well, it won't run right. Ours was going too "rich". Anyway, it is a four figure repair bill. That's a lot of money!

Peaceful
I took the vehicle over to the repair shop, at least 7 miles away, and had to "two-foot" it to get it there, but I am adept at such things. Before I left, I loaded up the Inbred and used that as my escape vehicle after dropping the Toyota off. It was a "night & day" experience.

The drive over, slightly stressed about the possibility of it dying on the way. Then the possibility of an expensive repair. Flip side- The ride home on a silent single speed, woods, quiet, and peace. A slowing down.

Then I thought about repair costs. Wow. Suddenly a ten speed chain, ten speed cassette , and a a couple chain rings do not seem like a big deal. Plus, I can count the number of times I have thought a drive in a car was "fun" on both my hands. Fun on a bicycle? I couldn't give you any idea what number of times that has happened. Multiple times per ride times what? Probably billions of times. How many times do you get stressed out by your bicycle ride? How about driving a car? See?

Seriously, we cyclists have a secret. Or do we? Most folks bitch and yell at us and want us to die and actually help us along that path at times, but maybe that is because of what we represent. Freedom from stress, expenses, freedom from the fast paced life. Maybe we have "real life", not some manufactured experience in a steel, plastic, and rubber cage on wheels. Maybe they do get it inherently. Maybe not.....

Whatever- I am glad I have my bicycles, and that I can ride them yet. Yesterday made me appreciate that even more so.

Wednesday, September 11, 2013

The Tale Of The Luxy Bar

My latest Luxy Bar acquisition.
The Luxy Bar: It is an odd ball bar that has taken on a life of its own of late. I call it, "thing wanted-can't get it", because it seems that once something odd like this passes from availability to obscurity and people start showing up with them on bicycles, then folks want it.

Maybe I am wrong, but this component is the most asked about component from my contacts via Facebook, e-mail, and Twitter, not to mention at gravel events and rides. Apparently, I have found out, it also is something a lot of folks are wanting to try. A little tiny market for used ones has sprung up. I actually got one just yesterday in the mail I purchased from a guy in Connecticut via Facebook. Another Luxy Bar fan I know just grabbed another Luxy Bar from a guy I helped get one to that ended up trying it and not liking it. It's kind of bizarre, but here's my take and a little back story on the Luxy Bar.......

The Luxy Bar started out with something I posted once on MTBR.com about how I would make a good drop bar and no one had it right yet back in 2009.  Well, I got a quick e-mail from Brant Richards, who had just left On One and had started his own design company and was running a brand for Chain Reaction Cycles called "Ragley Bikes". He wanted to know what I would do for a drop bar. I had actually done a sketch, so I scanned it and sent it to him with my thoughts. He said thanks and that he would get back to me.

I didn't hear anything for quite awhile, then Brant e-mailed me some factory images of a bar called the "D-62". I thought it was a bit of a radical departure from my original intentions, but I also had not seen anything quite like it either. (See these images in my blog post here from 2009. )

Brant was calling them the "Luxy Bar", after a bar/lounge in Asia. The bars were then to see some time under some testers and refinements were made. (Note, production bars differ from those raw images you see in my '09 post.) One of those testers was Sam from Singular Cycles. Near as I can tell, it was Sam's influence that made the Luxy come out as it did.

It was a long while before I heard the Luxy was ready, but in early 2011, Brant sent out a pair for me to try out and to say thanks for helping. (Although the final product was so radically different than what I initially put forth I have to say that I had no input! At least it wouldn't appear that I had.) So, I immediately mounted them up and started riding. After the first 300 miles or so, I posted an update. (Seen here) The Salsa Cycles Woodchippers were already out and I had purchased a few, but after the Luxy came along, I eventually gravitated toward using them more and soon the Woodchipper was no longer a favorite of mine.

Apparently a few folks fell in love with them, but not too many. I didn't hear much about Luxy Bars from others and I was always surprised to find out that certain people had them. You just never heard about them and they didn't come up in conversations about drop bars back then. Soon after I received the Luxy Bars, they went out of production, and perhaps that was due to Brant Richards going back to On One, or for low sales, or both reasons, I do not know. At any rate, that was that, and I figured I'd never hear about Luxy Bars again.

Well, about six months ago, I noticed that some people were chatting up Luxy Bars and I began to hear about folks looking for used ones. Then the inquiries came, probably based upon my past postings on them. The answer was always the same: "No- You can not get them anymore. No- I do not know if Chain Reaction will ever do another run." I heard from a Facebook friend that he had e-mailed about Luxy Bars going back into production and the answer was that there were no future plans to do anything with them. Then I decided to start a bit of a Twitter campaign to point out that folks could not get them anymore, but were looking for them. (hash tag #thingwantedcannotget) Then I actually contacted Brant one day and asked if he could get something done similar to the Luxy for On One.  Maybe that would work? Brant said he'd look into it, but that's been the last of it.

Still the Luxy Bar seems to be "in demand" by certain aficionados of drop bar usage off road and by gravelists. Just yesterday I ran across three more folks that said they'd like to try them.

Crazy, innit?

The Tale Of The Luxy Bar

My latest Luxy Bar acquisition.
The Luxy Bar: It is an odd ball bar that has taken on a life of its own of late. I call it, "thing wanted-can't get it", because it seems that once something odd like this passes from availability to obscurity and people start showing up with them on bicycles, then folks want it.

Maybe I am wrong, but this component is the most asked about component from my contacts via Facebook, e-mail, and Twitter, not to mention at gravel events and rides. Apparently, I have found out, it also is something a lot of folks are wanting to try. A little tiny market for used ones has sprung up. I actually got one just yesterday in the mail I purchased from a guy in Connecticut via Facebook. Another Luxy Bar fan I know just grabbed another Luxy Bar from a guy I helped get one to that ended up trying it and not liking it. It's kind of bizarre, but here's my take and a little back story on the Luxy Bar.......

The Luxy Bar started out with something I posted once on MTBR.com about how I would make a good drop bar and no one had it right yet back in 2009.  Well, I got a quick e-mail from Brant Richards, who had just left On One and had started his own design company and was running a brand for Chain Reaction Cycles called "Ragley Bikes". He wanted to know what I would do for a drop bar. I had actually done a sketch, so I scanned it and sent it to him with my thoughts. He said thanks and that he would get back to me.

I didn't hear anything for quite awhile, then Brant e-mailed me some factory images of a bar called the "D-62". I thought it was a bit of a radical departure from my original intentions, but I also had not seen anything quite like it either. (See these images in my blog post here from 2009. )

Brant was calling them the "Luxy Bar", after a bar/lounge in Asia. The bars were then to see some time under some testers and refinements were made. (Note, production bars differ from those raw images you see in my '09 post.) One of those testers was Sam from Singular Cycles. Near as I can tell, it was Sam's influence that made the Luxy come out as it did.

It was a long while before I heard the Luxy was ready, but in early 2011, Brant sent out a pair for me to try out and to say thanks for helping. (Although the final product was so radically different than what I initially put forth I have to say that I had no input! At least it wouldn't appear that I had.) So, I immediately mounted them up and started riding. After the first 300 miles or so, I posted an update. (Seen here) The Salsa Cycles Woodchippers were already out and I had purchased a few, but after the Luxy came along, I eventually gravitated toward using them more and soon the Woodchipper was no longer a favorite of mine.

Apparently a few folks fell in love with them, but not too many. I didn't hear much about Luxy Bars from others and I was always surprised to find out that certain people had them. You just never heard about them and they didn't come up in conversations about drop bars back then. Soon after I received the Luxy Bars, they went out of production, and perhaps that was due to Brant Richards going back to On One, or for low sales, or both reasons, I do not know. At any rate, that was that, and I figured I'd never hear about Luxy Bars again.

Well, about six months ago, I noticed that some people were chatting up Luxy Bars and I began to hear about folks looking for used ones. Then the inquiries came, probably based upon my past postings on them. The answer was always the same: "No- You can not get them anymore. No- I do not know if Chain Reaction will ever do another run." I heard from a Facebook friend that he had e-mailed about Luxy Bars going back into production and the answer was that there were no future plans to do anything with them. Then I decided to start a bit of a Twitter campaign to point out that folks could not get them anymore, but were looking for them. (hash tag #thingwantedcannotget) Then I actually contacted Brant one day and asked if he could get something done similar to the Luxy for On One.  Maybe that would work? Brant said he'd look into it, but that's been the last of it.

Still the Luxy Bar seems to be "in demand" by certain aficionados of drop bar usage off road and by gravelists. Just yesterday I ran across three more folks that said they'd like to try them.

Crazy, innit?

Tuesday, September 10, 2013

Short, Slack, & Steel

New plans are being put into motion here at the Guitar Ted Headquarters for new rigs in the future. Some old things will be put out to pasture, and new things are coming that will take their places. First up though is something I've been intrigued by since I first rode another bike like to it.

Singular Cycles Buzzard
I got a chance to test ride a Diamondback Mason HT earlier this year. I was very interested in just how such a bike would do here in the Mid-West. Would the short stays be good or bad? Would the slacker, longer front end be a detriment in tight single track and on steeps?

While the way the Mason was set up wasn't perfect for this area, I saw potential for fun. The bike steered well, it climbed reasonably well, and you could make what we have for technical areas a laughing stock, since the bike was so capable and stable.

So, the Mason ended up going back to its home after the test, but I still was thinking about this sort of set up and here comes a frame that might just do a similar trick for me, namely, the Singular Buzzard. Sam at Singular likes steel, and he has a great eye for classic looking aesthetic design, even if it is applied across a very new, rakish sort of bicycle. These are things that appeal to me greatly and why I already own a Singular Gryphon. Additionally, Sam did his homework here and made the Buzzard with a feature set that should prove versatile and "future-proof" for a while. 44mm head tube for both straight and tapered steer tubes, ISCG tabs, and a dropper post friendly seat tube diameter are all here.

I have a lot of parts to finish this frame out already. I just have to decide how I am going to go about it. Wheels and tires, brakes, dropper post, stem, cranks, derailleurs, and just about everything is here. But I may want to try some alternatives. Like 1 X 10 gearing, or really wide bars, or a different stem that I may not have.

But I've got time to think it over. I just pulled the trigger on this, so it will be awhile before I see it here. Stay tuned for updates on the Buzzard and more on some other projects coming soon.

Short, Slack, & Steel

New plans are being put into motion here at the Guitar Ted Headquarters for new rigs in the future. Some old things will be put out to pasture, and new things are coming that will take their places. First up though is something I've been intrigued by since I first rode another bike like to it.

Singular Cycles Buzzard
I got a chance to test ride a Diamondback Mason HT earlier this year. I was very interested in just how such a bike would do here in the Mid-West. Would the short stays be good or bad? Would the slacker, longer front end be a detriment in tight single track and on steeps?

While the way the Mason was set up wasn't perfect for this area, I saw potential for fun. The bike steered well, it climbed reasonably well, and you could make what we have for technical areas a laughing stock, since the bike was so capable and stable.

So, the Mason ended up going back to its home after the test, but I still was thinking about this sort of set up and here comes a frame that might just do a similar trick for me, namely, the Singular Buzzard. Sam at Singular likes steel, and he has a great eye for classic looking aesthetic design, even if it is applied across a very new, rakish sort of bicycle. These are things that appeal to me greatly and why I already own a Singular Gryphon. Additionally, Sam did his homework here and made the Buzzard with a feature set that should prove versatile and "future-proof" for a while. 44mm head tube for both straight and tapered steer tubes, ISCG tabs, and a dropper post friendly seat tube diameter are all here.

I have a lot of parts to finish this frame out already. I just have to decide how I am going to go about it. Wheels and tires, brakes, dropper post, stem, cranks, derailleurs, and just about everything is here. But I may want to try some alternatives. Like 1 X 10 gearing, or really wide bars, or a different stem that I may not have.

But I've got time to think it over. I just pulled the trigger on this, so it will be awhile before I see it here. Stay tuned for updates on the Buzzard and more on some other projects coming soon.

Monday, September 09, 2013

To Church & Back Again

Since I was caught up on work, I decided after church on Sunday to go for a ride. The destination-church! Well, not a church in town, but a church I've wanted to go ride by for a long, long time. This particular church is a rural church in Grundy County and I used the road that went by it for Trans Iowa V9.

I "drafted" this hay train for a couple of miles.
It was a good day to go do this ride on, since the temperatures were decent and the skies were overcast, for the most part, which made the long ride I planned less brutal. However; it really makes for poor lighting for any images!

I laced together a plan which included a few miles of railroad grade bicycle path, and then a few miles of chip seal until I hit gravel I'd not been on before for the trip North and Westward. I didn't have a map with me and I was going off memory of a map I'd looked at just before I left at a little before 3:00pm.

The plan was mostly coming together well. I had made all my turns and got into a section where I had to pass six intersections and then turn right. About this time I was running up on a tractor pulling three hay racks with one round bale a piece on them. I followed him for at least a couple of miles. The roads were also not on every mile at this point either, making things a bit more difficult. There was plenty of dust and my focus was on trying to stay far enough back that I didn't get into the thick dust this rig was kicking up. I may have been distracted by this, or I  just plain screwed up, but I missed the turn by a mile! No worries though. I turned right and rode on the shoulder alongside a blacktopped road a mile North to my correct road and turned left.

This is not the church you are looking for! (Zion Lutheran Church.)
Barns For Jason
Some of the fields are really drying down and turning color out here.
The skies started to clear a bit on into the ride.
Eventually I reached the turn Westward that would take me to the church I was in search of. It was a long slog of about 13 miles or so, and since I had a way to go, I settled in to enjoy it as well as I could.

I hadn't considered it before, but I noted finally that I wasn't hearing the wind and it was easy to crest hills. Drat! An East tailwind? You're kidding me! Bah! This wasn't a good revelation, since I had also noted that the roads in Grundy County had plenty of fresh gravel laid down, and head winds with fresh gravel is a recipe for really tough riding. Oh well! I had to enjoy the tailwind at the time and get grinding along as fast as I could go, since the turn around point would show me slower speeds in the reverse direction.

Fortunately I was running the Rock & Road tires by Bruce Gordon. These 43mm tires really handle chunky gravel well. I was running 45psi in back and about 40psi in the front, which was perfect. Even with these capable tires there were sections where I was pinging around and I had to pay close attention on faster parts of the route where the rough, loose gravel might kick me to the curb. It wasn't uncommon to hear a rock ping off a crank arm, rim, or part of the frame as it came off the tires. Not only were the rocks bad, but there was plenty of dust to collect on my legs and bicycle during the ride. I was one "Dirty Sanchez" by the time it was over!

Grundy County has some of the richest and most expensive farmland in the USA.
Soon these bins will be overflowing with corn and soybeans.
St. Paul's Lutheran Church, near Wellsburg, IA
I was counting down the roads as I went Westward. The Grundy County roads are easy to navigate, if you understand the naming and numbering scheme. East to West, each road you cross is an alphabetically named road. Starting with the beginning of the alphabet in the west, the roads are sequentially named "A", "B" and so on down to "X" before you reach the eastern border. As you travel North to South, each road you cross is numerically named. Starting with 110 in the North, each mile is indicated with an addition of "10" to the road name- so 110, then 120, then 130, and so on until you reach the Southern border. By this system you can pinpoint within a mile where you are in the county if you are on a road!

Unfortunately, not every county does things this way, but Grundy does and I could know just how far I had to go till I reached "H" Avenue where I would turn Northward to pass by the church I wanted to reach. I had planned a little relaxing and resting when I got there, but upon arriving I checked the time and was a bit alarmed that I had taken almost two hours to get there. A quick lunch, a bit of water, and back on the bike it was then. I had planned on being home by 6:00pm, but that wasn't going to happen! So I was leaving St. Paul's behind me in a rush and heading for a brutal East headwind that was coming pretty much straight down the road at me. I would be lucky to get back by 7:00pm at this rate, I figured.

"Cheater" road!
Eventually I was needing a brief stop to take a break from the constant pedaling and buffeting from the wind. I saw that the road turned to pavement dead ahead. I realized then that this would eventually lead me to Cedar Falls' outskirts, all on pavement. There also was a bonus in that  I was going to go through Dike, Iowa on this road where I could resupply if necessary, and it was looking as though that would be the case.

So, straight on it was then, with a brief stop at a roadside park looking for water, (which was unsuccessful), and then the stop in Dike for liquids and a sweet roll. Properly fueled and watered, I trudged on into the city and made it home 10 minutes after seven in the evening. Nearly four and a half hours after I had left for the ride!

It was a tough ride, but I "bagged" the church I wanted to ride by, and that was one more thing to check off the bucket list for rides around here.

To Church & Back Again

Since I was caught up on work, I decided after church on Sunday to go for a ride. The destination-church! Well, not a church in town, but a church I've wanted to go ride by for a long, long time. This particular church is a rural church in Grundy County and I used the road that went by it for Trans Iowa V9.

I "drafted" this hay train for a couple of miles.
It was a good day to go do this ride on, since the temperatures were decent and the skies were overcast, for the most part, which made the long ride I planned less brutal. However; it really makes for poor lighting for any images!

I laced together a plan which included a few miles of railroad grade bicycle path, and then a few miles of chip seal until I hit gravel I'd not been on before for the trip North and Westward. I didn't have a map with me and I was going off memory of a map I'd looked at just before I left at a little before 3:00pm.

The plan was mostly coming together well. I had made all my turns and got into a section where I had to pass six intersections and then turn right. About this time I was running up on a tractor pulling three hay racks with one round bale a piece on them. I followed him for at least a couple of miles. The roads were also not on every mile at this point either, making things a bit more difficult. There was plenty of dust and my focus was on trying to stay far enough back that I didn't get into the thick dust this rig was kicking up. I may have been distracted by this, or I  just plain screwed up, but I missed the turn by a mile! No worries though. I turned right and rode on the shoulder alongside a blacktopped road a mile North to my correct road and turned left.

This is not the church you are looking for! (Zion Lutheran Church.)
Barns For Jason
Some of the fields are really drying down and turning color out here.
The skies started to clear a bit on into the ride.
Eventually I reached the turn Westward that would take me to the church I was in search of. It was a long slog of about 13 miles or so, and since I had a way to go, I settled in to enjoy it as well as I could.

I hadn't considered it before, but I noted finally that I wasn't hearing the wind and it was easy to crest hills. Drat! An East tailwind? You're kidding me! Bah! This wasn't a good revelation, since I had also noted that the roads in Grundy County had plenty of fresh gravel laid down, and head winds with fresh gravel is a recipe for really tough riding. Oh well! I had to enjoy the tailwind at the time and get grinding along as fast as I could go, since the turn around point would show me slower speeds in the reverse direction.

Fortunately I was running the Rock & Road tires by Bruce Gordon. These 43mm tires really handle chunky gravel well. I was running 45psi in back and about 40psi in the front, which was perfect. Even with these capable tires there were sections where I was pinging around and I had to pay close attention on faster parts of the route where the rough, loose gravel might kick me to the curb. It wasn't uncommon to hear a rock ping off a crank arm, rim, or part of the frame as it came off the tires. Not only were the rocks bad, but there was plenty of dust to collect on my legs and bicycle during the ride. I was one "Dirty Sanchez" by the time it was over!

Grundy County has some of the richest and most expensive farmland in the USA.
Soon these bins will be overflowing with corn and soybeans.
St. Paul's Lutheran Church, near Wellsburg, IA
I was counting down the roads as I went Westward. The Grundy County roads are easy to navigate, if you understand the naming and numbering scheme. East to West, each road you cross is an alphabetically named road. Starting with the beginning of the alphabet in the west, the roads are sequentially named "A", "B" and so on down to "X" before you reach the eastern border. As you travel North to South, each road you cross is numerically named. Starting with 110 in the North, each mile is indicated with an addition of "10" to the road name- so 110, then 120, then 130, and so on until you reach the Southern border. By this system you can pinpoint within a mile where you are in the county if you are on a road!

Unfortunately, not every county does things this way, but Grundy does and I could know just how far I had to go till I reached "H" Avenue where I would turn Northward to pass by the church I wanted to reach. I had planned a little relaxing and resting when I got there, but upon arriving I checked the time and was a bit alarmed that I had taken almost two hours to get there. A quick lunch, a bit of water, and back on the bike it was then. I had planned on being home by 6:00pm, but that wasn't going to happen! So I was leaving St. Paul's behind me in a rush and heading for a brutal East headwind that was coming pretty much straight down the road at me. I would be lucky to get back by 7:00pm at this rate, I figured.

"Cheater" road!
Eventually I was needing a brief stop to take a break from the constant pedaling and buffeting from the wind. I saw that the road turned to pavement dead ahead. I realized then that this would eventually lead me to Cedar Falls' outskirts, all on pavement. There also was a bonus in that  I was going to go through Dike, Iowa on this road where I could resupply if necessary, and it was looking as though that would be the case.

So, straight on it was then, with a brief stop at a roadside park looking for water, (which was unsuccessful), and then the stop in Dike for liquids and a sweet roll. Properly fueled and watered, I trudged on into the city and made it home 10 minutes after seven in the evening. Nearly four and a half hours after I had left for the ride!

It was a tough ride, but I "bagged" the church I wanted to ride by, and that was one more thing to check off the bucket list for rides around here.