Friday News And Views

Image courtesy of Otso Cycles

 Window Dressing:

I mentioned this in last week's FN&V, and  I am still seeing a lot of stagnation in introductions of really new, redesigned or new designs for cycling. But what I am seeing a ton of  is new colors and new spec choices.

Take this Otso Cycles "Special Edition" Waheela C. This bike is not new, it's really just two new color choices and a special spec on their long-standing carbon gravel bike. 

Now, I will say the Rainbow Sparkle is pretty rad, but this is where we are at now. Companies need something to entice you to buy beyond discounting and they cannot afford to chuck up a new design or new idea for a component and sell those as the market has been in stagnation for the better part of three years now.

Part of what is going on is a complex, evolving change in retail. How we purchase things is changing and how things were/are offered to consumers is stagnant, or slow to catch up to these changes. I wrote about these things in a three part series which you can check out by going to this post which has links back to the two other articles in the series.

This cycle of refreshed paint and spec bolted to the same frames and forks may not end soon either. It's all window dressing, but again.....rainbow sparkle. C'mon! Even I can get jazzed by the window dressing from time to time, so I understand how it can work. 

Gravel Earth Series August Events:

A big month for a few USA based gravel events and the Gravel Earth Series. Three of the stalwarts of the gravel calendar now are taking place soon. You've got Rebecca's Private Idaho, the venerable Gravel Worlds, and the newcomer, but an important event now, CORE4 in Iowa.

I find it interesting that the Gravel Earth Series accepts events as they have evolved over time, (Rebecca's, Gravel Worlds), and accepts new events as envisioned, (CORE4). This is quite different to how the UCI structures events, which I have covered here to a fine degree of detail.

While I understand both theories of each entity's series, I find it rather curious when considering what will come out on top, in terms of what matters to the gravel scene overall. There is one key to the puzzle, and neither series - The UCI's or Gravel Earth's - have an opportunity to snag the premier jewel of gravel events because another entity owns it. Consider the magnitude of a decision to sell Unbound, as an event, upon the gravel racing world. 

Whichever entity grabbed that event would instantly become THE racing series worldwide.  Life Time doesn't quite seem to want to, or maybe cannot, separate MTB from gravel and grow a series which would become the premier gravel racing series in the World. Maybe they don't care about such things. I don't know. I just find the whole idea intriguing and whether or not it happens really doesn't natter to me except from a historical standpoint. 

Public Service Announcement:

Recently I've noted a few comments in the comment section which were "nice", but had a hyperlink in them. These may be AI generated spam, or.....? I'm not sure 100% because every one of these is from a "person" with a female name who I have never heard from here before. So, take that as you will. 

My point is that any comment waiting for moderation here which has an active hyperlink in it will be deleted summarily. I do not allow live hyperlinks in the comments. You can copy and paste a html link to a webpage in the comments which others can copy and paste into a browser, if they so choose, which  - know - might be a pain, but it is what I will allow in the comments.  

Again, it all may be much fuss about nothing to do with 'real people' here. Thanks for your attention to this message! 

Image courtesy of DT Swiss

DT Swiss Recalls Wheels In CRC, HEC, ERC Ranges:

Possibilities for rim/side wall delamination has caused a stop-ride and recall for DT Swiss wheels in their CRC, HRC, and ERC wheel ranges. A directive was sent out regarding the recall on Wednesday of this week.

On the DT Swiss site the reasons for the recall were detailed as such:

"We would like to inform you that DT Swiss is recalling affected wheel models of the ERC, CRC, and HEC series with rim heights of 35 and 45 mm and models of the ARC series with rim heights of 50, 55, and 65 mm. While the initial Stop-Use Notice applied to selected ERC, CRC, and HEC wheels, the recall includes ARC models manufactured at the same facility. Although no product defects have been reported for the ARC series, in-depth quality checks have revealed manufacturing concerns similar to those previously identified in the ERC/CRC/HEC models."

For more details see the recall page on DT Swiss' site HERE.

Got An Itch To Scratch:

The beginning of 2025 was all about looking forward to the Tree In The Road ride. That one was fun, but it wasn't quite what I was wanting in terms of distance.

I need a long ride. Trouble is, the weather, since the TITRR, hasn't been conducive to achieving this goal of mine. The extreme heat, humidity, and rains have thwarted any ideas for an all-day in the saddle ride.

And now that the heat and humidity have departed for a short time, we have wild fire smoke. Bah!

But August can't bad all bad, can it? So, hopefully very soon I will be able to carve out one day to ride most of that day and get this itch scratched. I am hopeful the weather will at least be tolerable and wildfire smoke goes away soon.

Fall will bring more opportunities and I am going to try to fit in the alley ride, plus the annual Turkey Burn ride. So, at least three or four more big days could happen, or none of them will. I am not hanging all my hopes on any of this because I know how things have gone the past three years and the rest of my life hasn't changed at all in other areas during this time period. If any of these rides happen it will be regarded as "unusual" and a huge blessing. 

Image credit: Google search

An Ode To Tubasti:

A comment was left on the blog the other day by a reader who goes by "scottg". It was a poem credited to an Aldo Ross about tubular glue.

Tubeless goop raises the ire of some riders, but they should be aware that tubular glue, which was used to set up tubular tires, was a thing for decades and we all should be thankful we don't have to deal with it much, if at all, anymore. I never did glue up tubulars, which may surprise some of you, but I caught on very early in my career as a bicycle mechanic that this procedure was not a lot of fun. 

So, I left the deed to others who were either ready to accept the hassles of tubulars or weren't aware of the consequences of using tubular glue.  

 Here's the poem as it was left in the comments for your enjoyment:

Tubasti 

 Tubasti on the sidewalls
Tubasti on the spokes
Tubasti on the workbench
And a bunch of cotter bolts

Tubasti on the visegrips
Tubasti on my arm
Tubasti on my chin and cheek
I hope it won't cause harm

Tubasti on the light switch
Tubasti on the cats
Tubasti on my shoes and socks
And on my car's floor mats

Tubasti on the carpet
Tubasti in my hair
I tried to glue just one damn tire
Now Tubasti's everywhere!

Credited to Aldo Ross. 

Thanks scottg for tipping us off to this gem!  

That's a wrap for this week. Get out and ride those bicycles! 

News Flash! QBP Issues Recall For Select Carbon Salsa And Whisky Drop Bars

From social media on 10/7/22.

Friday October 7th, 2022 Quality Bicycle products issued a "Stop Ride/Stop Sale" on carbon drop bars including the Salsa Cowchipper, Cowbell, and Whiskey No 9 12 and 24 carbon flared drop bars. Further information follows provided by Quality Bicycle Products:

"We have received reports indicating that some of these... handle bars have cracked where the brake/shift levers are installed. This has the potential to cause a crash and serious injury to the rider."

 If you believe you have one of the handlebars included in this notice, please stop using them immediately and until further notice. Contact the retailer where you made your purchase if they have not contacted you already.

Whisky team members are working with the larger QBP organization on a resolution to get you back up and riding quickly and safely. We are also working with the Consumer Products Safety Commission and Health Canada to conduct a formal voluntary recall, which will be announced soon.

 See your Salsa Authorized Retailer if you're uncertain whether you have affected product.

• Please contact your Salsa Authorized Retailer so they can collect information about your affected product for future resolution.
  

We sincerely apologize for this situation and any inconvenience it causes. For updates, please visit whiskyparts.com. or salsacycles.com With any questions, please contact QBP via email at recall@qbp.com or at 800-346-3340.

The preceding information is an amalgam of the Salsa and whisky Co recall messages.

News Flash! QBP Issues Recall For Select Carbon Salsa And Whisky Drop Bars

From social media on 10/7/22.

Friday October 7th, 2022 Quality Bicycle products issued a "Stop Ride/Stop Sale" on carbon drop bars including the Salsa Cowchipper, Cowbell, and Whiskey No 9 12 and 24 carbon flared drop bars. Further information follows provided by Quality Bicycle Products:

"We have received reports indicating that some of these... handle bars have cracked where the brake/shift levers are installed. This has the potential to cause a crash and serious injury to the rider."

 If you believe you have one of the handlebars included in this notice, please stop using them immediately and until further notice. Contact the retailer where you made your purchase if they have not contacted you already.

Whisky team members are working with the larger QBP organization on a resolution to get you back up and riding quickly and safely. We are also working with the Consumer Products Safety Commission and Health Canada to conduct a formal voluntary recall, which will be announced soon.

 See your Salsa Authorized Retailer if you're uncertain whether you have affected product.

• Please contact your Salsa Authorized Retailer so they can collect information about your affected product for future resolution.
  

We sincerely apologize for this situation and any inconvenience it causes. For updates, please visit whiskyparts.com. or salsacycles.com With any questions, please contact QBP via email at recall@qbp.com or at 800-346-3340.

The preceding information is an amalgam of the Salsa and whisky Co recall messages.

Friday News And Views

2020 Cutthroat frame/fork

 Salsa Cycles Issues Recall Notices On Cutthroat, Cutthroat Frame sets, And Carbon Forks: 

Earlier this week Salsa Cycles issued recall notices for certain Cutthroat, Cutthroat frame sets, and after market carbon forks. See the specifics here: https://salsacycles.com/cutthroat-carbon-v2-fork-recall

The statement released by Salsa Cycles reads as follows: 

"In some instances, the fork can crack or break which could lead to a crash. Stop riding your bicycle immediately and take it to a Salsa Authorized Retailer for inspection or replacement if necessary."

The models are listed on the site at the link provided above. Be aware that you cannot identify fork batch serial numbers without removing the fork, so an outward inspection is not enough. Please follow recommendations and check out your Cutthroat at a Salsa Cycles dealer if you think it may be affected by this recall.  

The fizik Alpaca Tool Carrier as mounted to a Terra XC saddle. Image courtesy of fizik.

fizik Debuts Tool Storage Solution:

Remember in last week's "FN&V" post where I shared with you all about that 'gravel specific Terra saddle from fizik? Well, they just announced a tool storage solution to go along with those saddles also. It is called the Alpaca Tool Carrier. 

It is not completely obvious how the Alpaca Tool Carrier integrates with the Terra saddles, but fizik says in its press release that" For a secure, integrated connection, the Tool Carrier easily affixes to your Alpaca saddle with a single screw." At any rate, you get a 12 function multi-tool and a place for two CO2 cartridges. The multi-tool body does double duty as an air inflation head. You also get "removable housing for two C02 cartridges, reusable zip ties and extra space for other small essentials. "

This isn't the first integrated tool carrying solution which works with a cycling saddle. THAT distinction would go to the Brooks B-17, most likely. Those two metal tabs on the back edge of Brooks B-17's are supposed to be mounting points for a leather tool bag, which Brooks also makes, (or did until recently). 

The fizik solution may appeal to those who buy into this saddle. It's kind of a neat, streamlined way to do things if you are all about CO2 carts. I know many of you are not really fans for various reasons. I also am not, but many folks dig the idea and this may be something that appeals to your needs. 

Arc8's new 'Eero' model gravel bike. Image courtesy of Arc8

A Look At The Latest In 'Gravel' Bikes: 

You may have noticed the mainstream cycling press sounding off on a new 'gravel' bike from a Swiss company called Arc8. The model the sites were carrying on about is the Eero, which is the first name of a famous rally car driver from the past with a penchant for gravel road performances, apparently. 

At any rate, while the marketing claims and hyperbole surrounding this release is somewhat laughable, I wanted to see what, if anything, this bike has that 'gravel' bikes had back in 2014 when the Tamland came around. So with that in mind, let's scrutinize the differences, shall we?

The Eero has what has been termed a 'more racy gravel geometry' which is not all slacked out. Hmm.... Okay, I found that these bikes sport a 71° head angle with a 50mm fork offset. The Tamland sported a 71.5° head angle with the same 50mm offset. The Eero has a 75mm bottom bracket drop with 420mm chain stays and clearances for 'up to a 50mm tire'. The Tamland had a 72.5mm bottom bracket drop with 435mm chain stays and clearances for up to a 50mm tire. 

The Eero has a frame which is carbon fiber, with claimed stiffness in the bottom bracket and a stiffer head tube than previous models offered by Arc8. The Tamland had a Reynolds 631 frame and fork with a beautiful 'steel' ride, and not at all like a carbon bike. 

The Eero also has the now prized 'clean' look since ALL it's cables are internally routed starting at the stem. The Raleigh had traditional, external routed cables with full run housing for both front and rear brakes.  Both bikes have two water bottle bosses inside the front triangle. The Eero also has a 'bento box' mount on the top tube and an additional cage mount underneath the down tube, as did later Tamlands. 

Comments: The geometry hasn't changed all that much with the exception of 'road racer' inspired short chain stays, which some say make the bike feel 'snappier'. I don't know about that, but I do know shoving the rear wheel underneath your butt more, (especially on larger sized riders) is a recipe for a bouncier ride off pavement. It also sketches out loose gravel descents. Noted also that the stiffness of the Eero was touted. Again- not exactly what we gravel riding folks are looking to have there. 

There are no provisions for bottle mounts on the forks of either this or the Tamland. However; you probably wouldn't want to ride a really stiff bike long enough to drink five water bottles worth of fluids either.  Or maybe you would. Good luck with that. 

Anyway, this whole 'gravel' thing should really be seen as an 'anti-racing', all-road, adventure, utility bike, better than racing bikes bike. Not a super-stiff race rocket, which is pretty much what the Eero sounds like to me. Maybe I'm all wrong, but if this is what becomes of gravel bikes, well some of it is right on, but rider comfort and control are, once again, being sacrificed. Not to mention ease of maintenance with the stupid internally routed stem cables. Gah! At least the Eero has a threaded bottom bracket. 

The WTB CZR rim in 23mm internal width. Image courtesy of WTB.

WTB Announces New Carbon Rims With The CZR:

Thursday WTB released news that they had a new offering for carbon rims dubbed CZR. Coming in two internal width sizes of 23mm and 30mm, WTB is aiming at the gravel and MTB riders here. This rim is lightweight, obviously, but according to WTB's press release, the CZR rims have also been tested and found to be very tough and stiff laterally. Both very desirable traits in a rim for off-pavement usage.   

The CZR also features WTB's 4D spoke hole 'geometry', which as a wheel builder myself, having used this feature, I can tell you that it does reduce unwanted tensions on the spoke where it exits the rim. This theoretically leads to a longer spoke life. I built an aluminum rimmed wheel set using WTB's 4D spoke drilling back 8 years ago and those wheels are still going with zero spoke issues. That's one data point, but it also is something to consider. 

Now for the bad part: $569.95 for EACH rim. Ouch! But......here's how I would look at this: You build up a set here with a decent hub set, let's say you spend around $600-$700 on that, then spokes, nipples, rim tape, and these rims. For under 2G you'd have a premium set of wheels, hand built, and I would expect them to last years and years. I mean, for gravel road riding? I'd think well over ten years would be nothing. You'd replace hub bearings maybe a time or three, but that's it. So, it would make sense for someone to build up a set IF they were thinking they would be cycling seriously and a lot for many years with a bike style that would fit this wheel's MO. 

Now on the MTB side, eh......less of a long term prospect here. Why? Well, wheel standards have changed what? Three times in the last ten years?  Changed so much that hubs are completely different lengths and with completely different interfaces. So, given that history, I would be remiss if I didn't think that trend would continue. In my opinion, the gravel bike thing is less likely to change, but even so- one could re-lace these to a new hub set. So, you would have to maybe think along those lines to justify the price. 

At any rate, an interesting new carbon rim here and something that can be used to lace up to any high end hub. There is a crash replacement warranty and a limited lifetime warranty on these as well. Check it out at WTB's site.  

That's a wrap for this week. Hope you all are getting outside! 

Friday News And Views

2020 Cutthroat frame/fork

 Salsa Cycles Issues Recall Notices On Cutthroat, Cutthroat Frame sets, And Carbon Forks: 

Earlier this week Salsa Cycles issued recall notices for certain Cutthroat, Cutthroat frame sets, and after market carbon forks. See the specifics here: https://salsacycles.com/cutthroat-carbon-v2-fork-recall

The statement released by Salsa Cycles reads as follows: 

"In some instances, the fork can crack or break which could lead to a crash. Stop riding your bicycle immediately and take it to a Salsa Authorized Retailer for inspection or replacement if necessary."

The models are listed on the site at the link provided above. Be aware that you cannot identify fork batch serial numbers without removing the fork, so an outward inspection is not enough. Please follow recommendations and check out your Cutthroat at a Salsa Cycles dealer if you think it may be affected by this recall.  

The fizik Alpaca Tool Carrier as mounted to a Terra XC saddle. Image courtesy of fizik.

fizik Debuts Tool Storage Solution:

Remember in last week's "FN&V" post where I shared with you all about that 'gravel specific Terra saddle from fizik? Well, they just announced a tool storage solution to go along with those saddles also. It is called the Alpaca Tool Carrier. 

It is not completely obvious how the Alpaca Tool Carrier integrates with the Terra saddles, but fizik says in its press release that" For a secure, integrated connection, the Tool Carrier easily affixes to your Alpaca saddle with a single screw." At any rate, you get a 12 function multi-tool and a place for two CO2 cartridges. The multi-tool body does double duty as an air inflation head. You also get "removable housing for two C02 cartridges, reusable zip ties and extra space for other small essentials. "

This isn't the first integrated tool carrying solution which works with a cycling saddle. THAT distinction would go to the Brooks B-17, most likely. Those two metal tabs on the back edge of Brooks B-17's are supposed to be mounting points for a leather tool bag, which Brooks also makes, (or did until recently). 

The fizik solution may appeal to those who buy into this saddle. It's kind of a neat, streamlined way to do things if you are all about CO2 carts. I know many of you are not really fans for various reasons. I also am not, but many folks dig the idea and this may be something that appeals to your needs. 

Arc8's new 'Eero' model gravel bike. Image courtesy of Arc8

A Look At The Latest In 'Gravel' Bikes: 

You may have noticed the mainstream cycling press sounding off on a new 'gravel' bike from a Swiss company called Arc8. The model the sites were carrying on about is the Eero, which is the first name of a famous rally car driver from the past with a penchant for gravel road performances, apparently. 

At any rate, while the marketing claims and hyperbole surrounding this release is somewhat laughable, I wanted to see what, if anything, this bike has that 'gravel' bikes had back in 2014 when the Tamland came around. So with that in mind, let's scrutinize the differences, shall we?

The Eero has what has been termed a 'more racy gravel geometry' which is not all slacked out. Hmm.... Okay, I found that these bikes sport a 71° head angle with a 50mm fork offset. The Tamland sported a 71.5° head angle with the same 50mm offset. The Eero has a 75mm bottom bracket drop with 420mm chain stays and clearances for 'up to a 50mm tire'. The Tamland had a 72.5mm bottom bracket drop with 435mm chain stays and clearances for up to a 50mm tire. 

The Eero has a frame which is carbon fiber, with claimed stiffness in the bottom bracket and a stiffer head tube than previous models offered by Arc8. The Tamland had a Reynolds 631 frame and fork with a beautiful 'steel' ride, and not at all like a carbon bike. 

The Eero also has the now prized 'clean' look since ALL it's cables are internally routed starting at the stem. The Raleigh had traditional, external routed cables with full run housing for both front and rear brakes.  Both bikes have two water bottle bosses inside the front triangle. The Eero also has a 'bento box' mount on the top tube and an additional cage mount underneath the down tube, as did later Tamlands. 

Comments: The geometry hasn't changed all that much with the exception of 'road racer' inspired short chain stays, which some say make the bike feel 'snappier'. I don't know about that, but I do know shoving the rear wheel underneath your butt more, (especially on larger sized riders) is a recipe for a bouncier ride off pavement. It also sketches out loose gravel descents. Noted also that the stiffness of the Eero was touted. Again- not exactly what we gravel riding folks are looking to have there. 

There are no provisions for bottle mounts on the forks of either this or the Tamland. However; you probably wouldn't want to ride a really stiff bike long enough to drink five water bottles worth of fluids either.  Or maybe you would. Good luck with that. 

Anyway, this whole 'gravel' thing should really be seen as an 'anti-racing', all-road, adventure, utility bike, better than racing bikes bike. Not a super-stiff race rocket, which is pretty much what the Eero sounds like to me. Maybe I'm all wrong, but if this is what becomes of gravel bikes, well some of it is right on, but rider comfort and control are, once again, being sacrificed. Not to mention ease of maintenance with the stupid internally routed stem cables. Gah! At least the Eero has a threaded bottom bracket. 

The WTB CZR rim in 23mm internal width. Image courtesy of WTB.

WTB Announces New Carbon Rims With The CZR:

Thursday WTB released news that they had a new offering for carbon rims dubbed CZR. Coming in two internal width sizes of 23mm and 30mm, WTB is aiming at the gravel and MTB riders here. This rim is lightweight, obviously, but according to WTB's press release, the CZR rims have also been tested and found to be very tough and stiff laterally. Both very desirable traits in a rim for off-pavement usage.   

The CZR also features WTB's 4D spoke hole 'geometry', which as a wheel builder myself, having used this feature, I can tell you that it does reduce unwanted tensions on the spoke where it exits the rim. This theoretically leads to a longer spoke life. I built an aluminum rimmed wheel set using WTB's 4D spoke drilling back 8 years ago and those wheels are still going with zero spoke issues. That's one data point, but it also is something to consider. 

Now for the bad part: $569.95 for EACH rim. Ouch! But......here's how I would look at this: You build up a set here with a decent hub set, let's say you spend around $600-$700 on that, then spokes, nipples, rim tape, and these rims. For under 2G you'd have a premium set of wheels, hand built, and I would expect them to last years and years. I mean, for gravel road riding? I'd think well over ten years would be nothing. You'd replace hub bearings maybe a time or three, but that's it. So, it would make sense for someone to build up a set IF they were thinking they would be cycling seriously and a lot for many years with a bike style that would fit this wheel's MO. 

Now on the MTB side, eh......less of a long term prospect here. Why? Well, wheel standards have changed what? Three times in the last ten years?  Changed so much that hubs are completely different lengths and with completely different interfaces. So, given that history, I would be remiss if I didn't think that trend would continue. In my opinion, the gravel bike thing is less likely to change, but even so- one could re-lace these to a new hub set. So, you would have to maybe think along those lines to justify the price. 

At any rate, an interesting new carbon rim here and something that can be used to lace up to any high end hub. There is a crash replacement warranty and a limited lifetime warranty on these as well. Check it out at WTB's site.  

That's a wrap for this week. Hope you all are getting outside!