Sunday, August 16, 2026

Deconstruction: Part 1

Well, since I've been getting rained out here I figured I may as well get cracking on with the new wheel build for the Fargo Gen I. "New" as in a new assemblage of older parts I have. The spokes and nipples may be the only new thing I use. 

The rims will be the venerable Bontrager Duster rims. These were off the Trek Sawyer I once had. The hubs will be the old Chris King hubs, the very same hub set I used over a decade ago during the "Mud Year" of 2015 at the DK200. 

The plan will be to do the "Guitar Ted Special" build, which is black spokes on one side, silver on the other, with one wheel having a reverse arrangement from the other. Black spokes will get silver nipples and silver spokes will get black nipples. I know, it sounds weird, but it looks rad - to my eyes - and I have a few wheel sets already built up using this scheme. 

Other details will include removal of the stickers on the rims, getting the hubs checked out inside, and re-using the Bontrager TLR rim strips. Bontrager TLR Rim strips? Yes..... I'll show you. 

But first, I had to begin things by blowing apart the old wheels. Let the deconstruction commence!

Dismounting the Extraterrestrials was no small task. This was due mostly to the TLR rim strip. Dislodging the bead of the tire from the bead channel molded into the TLR rim strip is a chore. Good thing if you flat while riding because it is unlikely the TLR rim strip will let your tire go. Bad if you want to actually remove a tire. 

So, to dislodge the bead from the TLR bead channel, I devised a tool from a Pedros tire lever. The purpose of this was to push the bead over the inner part of the bead channel and into the rim well. It worked! Good thing because I could not roll it off with my hands at all. 

After this, you'd think things would get easier. Nope! Next you have to remove the TLR rim strip to reveal the spoke holes and nipples. You want to do this very carefully. The reason being is that the edges of the rim strip are delicate and it is easy to damage the molded strip. I was able to get it out okay. 

Then all I needed to do was start cleaning things up and move on to the next wheel. But I won't get into all of that here. The next update will show you the rims cleaned up and what my spokes will be for the build. After this, I need to verify the condition of the rear King hub, in particular, and build up the wheels, of course. 

The TLR rim strip in situ.

 
Here the TLR rim strip is removed.
One more thing about the system. This was the first, good tubeless rim system ever made. Everything fit together like puzzle pices, but you were locked into Bontrager stuff. Maybe not necessarily in regard to tires, but the rim, rim strip, and valve were all proprietary technology. Brilliant in design though, and it worked perfect most every time. 

No tape to fail, tires were held securely, and things were serviceable. It's too bad it wasn't an industry wide standard, really. Anyway.... 

Stay tuned. 

Saturday, August 15, 2026

CORE-Wet

Today CORE4 is supposedly happening. (Note- I wrote this post up before Saturday, so if it was postponed/cancelled, I didn't know about it yet)

Rain has plagued Iowa, and especially the center section of the state from East to West, all week long with flash flood emergencies being issued by the National Weather Service. Rain came down hard on the course Friday morning and overnight as well. 

I spoke with N.Y. Roll on Friday 'fore-noon' and he mentioned the courses for wet weather were all in effect except the Pro 120. Furthermore, parking at the venue is now banned and has been moved approximately three miles away to a paved lot area. There will be shuttles available for volunteers, spectators, and runners, but cyclists will have to ride that three-ish miles to the start and back again to the lot. I'm going to assume Pros will have rides provided by team members or sponsors. 

It promises to be chaotic, stressful, and possibly quite the adventure. As a former event promoter, I know all to well about last minute weather intrusions and having to adjust accordingly. I have also ridden in events which were modified by weather. So, I've experienced both sides. 

My hope is the attendees have some grace with the promoters. Getting the event in some way is going to be their top priority balanced with rider safety. It is NOT an easy thing to do. It IS easy to get on your digital soapbox afterward and complain bitterly about how "this or that" sucked and should have been done in a different way. (Although most folks never offer any real, applicable solutions)

Well, we shall see what happens soon enough. Maybe N.Y. Roll with have an eyewitness report if he decides to go take this event on after all. 

Friday, August 14, 2026

Friday News And Views

Image courtesy of Trek Bicycles.
Mazda Becomes Official Vehicle Of Trek Off-Road Teams In North America:

On Tuesday a press release went out declaring the Mazda has become the Official Vehicle of Trek North American Off-Road Teams and events. 

Mazda will provide the CX-50 model to Trek in a "multi-year" deal. These vehicles will appear at North American XC MTB events, DH events, and at select gravel events under the "DRFTLSS" moniker. (DRFTLSS example shown) 

Comments: Old timers will recall the Trek VW MTB Team and how they were a staple of the NORBA scene in the mid to late 90's. There were some Trek VW mountain bike models made and sold at dealers, but no such plan has been revealed for this new partnership with Mazda. 

Yeah.....gravel events have come a long, long way. Team cars at gravel events? With big time sponsorship from a worldwide automaker? Crazy.....  I just shake my head in wonder.

Then there is this current trend to avoid vowels. I'm going to say it - I don't like it. I know...... Maybe I'm a fuddy-duddy, but spelling is important to me. At least it seems the terms "groadie" and "groad" have quietly been retired. Those were just plain stupid. I always despised those two terms.

Image courtesy of Trek Bicycles

 You're Almost There!

The "endurance" geometry road bikes have been creeping into "gravel bike" territory for the last couple of years. On Thursday Trek released the fifth generation of the Domane. It is another step closer to where I thought road bikes for the average folks should be at back in 2010. 

Featuring the new frame and fork which has retired the use of IsoSpeed (thankfully!), Trek has otherwise designed in a compliant seat post, (A ROUND seat post? gasp!) and given the bike clearance for tires up to 40mm. The geometry is pretty much "first generation" gravel bike geo, and hilariously, they ditched the down tube storage to lighten the frame. (Take that N.Y. Roll!)  

There are several models to choose from starting at about 8K and going up from there. 

Comments: First of all, Trek's website navigation is a disaster. It seems overly-complex and offensive in its barrage of visual information. Maybe that's just me, but I've seen far easier sites to look at. That much I do know.... 

Okay, the bikes! Well, I find it very interesting that, ten years ago, this would have been a top tier gravel bike without question. Checking into some details, there is even a frame bag mount and a custom fitted bag available for this Domane along with a top tube bag. Fully kitted out, a new Gen 5 Domane would slip right into any current gravel event and no one would bat an eyelash.  

There is a white paper page which goes into all the nerdy details of the ditching of IsoSpeed. I found it fascinating to read that Trek credits tire volumes and disc brakes as things which have negated the need for decoupling their frames. They credit flexing seat posts as a benefit as well as their trotting out the old saw of "vertical compliance and lateral stiffness". (HA!) 

I'm glad Trek figured it out, (finally), but they need to go just a little further with this. Give me clearance for 42/43mm tires, (or 45mm, since the tire folks have kinda landed on a 40-45-50 scheme), and slacken that head angle a half degree or so and we're there. Domane AllRoad, I'd call it. Oh! And maybe not make the entry level bike so dang expensive (carbon), 8K is nuts.  

 

Accell Group Declared Bankrupt By Dutch Court:

In news from the bicycle industry, it was revealed on Wednesday that a Dutch court had declared Accell Group and its brands bankrupt. This is an escalation from the previous designation by the courts which would have provided a means of restructuring the company. 

Accell Group owns the brands Raleigh, Lapierre, Ghost, Haibike, and others. The status of these subsidiaries is  complex due to the multi-national situation. Lapierre, for instance, is seeking to find its way independently, but the success of this move has yet to be determined. 

You can see more details in the story posted on "Bicycle Retailer and Industry News" 

Comments: This seemed to me to be the most probable end-game for Accell, who have struggled mightily since the pandemic. It would be easy to blame that time for this news, but I feel Accell's problems started well before this. 

Now.....this is just my opinion, but as I was working at a Raleigh dealer in the USA in the 2010's, I can say that Raleigh was at their pinnacle of potential here in 2014. In that year Raleigh introduced the Tamland range. It was one of the very first, purpose-designed bicycles for gravel. It also sold very well. Raleigh could have made a big dent in the gravel market. 

However; shortly afterward, Raleigh started a consumer direct model of selling bicycles, which Raleigh's US based dealer network was not happy about. 

Subsequently their dealership numbers faded quickly here. This coupled with Raleigh's too soon timing of their D2C move essentially erased Raleigh's presence from the US bicycle market. It could have gone so much differently, but the D2C thing along with a lack of vision for the Tamland and successors in the gravel range pretty much set the tone for what happened after the pandemic.   

unPAved of the Susquehanna River Valley Announces 2026 Events:

A press release sent out on Wednesday announced the details on the 9th unPAved of the Susquehanna River Valley events for 2026. This year the unPAved weekend will be on October 10th - 11th in Lewisburg, Pennsylvania. 

Some details include:

Race for Whoopie Pies: For those who want a place on the podium and part of a $3,000 cash purse we've got the Full-130 course battled out over four timed segments that add up to 59 total miles (45% of the full route) of gravel racing. And if that’s not enough, there's the Big Lick-200 for the ultra endurance folks that prefer to race through the night.

Ride at Pierogies Pace: For those just looking for the vibes and the views we've got four choose-your-own-adventure courses from just over 50 miles to the Full-130 course at a civilized pace and lower price. Plus we have added two new courses (40 and 70 miles) for our Pierogi Pacers in 2026 that will start and finish at the Rusty Rail Brewing Company in Mifflinburg, PA.

Have a SlumberPArty: If you're all about gravelmaxxing the weekend our SlumberPArty gives you two days to ride the course. Roll out on Saturday, camp overnight at R.B. Winter State Park, and finish the course with the other riders Sunday. We'll even ferry your gear to and from camp.

Weekend Full of Activities: unPAved has grown from a single-day event to a full 3-day weekend, with gatherings starting on Friday night, and on Saturday there’s the Lewisburg Fall Festival with FUNpaved Rides, vendors, crafters, and kids’ activities followed up by the unPAved Film Festival at the historic Campus Theatre in downtown Lewisburg, PA.

Comments: Highly recommended event and one of the very best gravel events anywhere. Especially for anyone on the East Coast. Register HERE

No Powerline?

Wildfire damage has altered the course for this weekend's Leadville event taking out an iconic climb and making the overall elevation gain for the event less than it typically has. 

Storylines for this year include Quin Simmons attempt at the Men's win, Last year's Woman's winner, Kate Courtney's attempt two double up, 32"ers making a dent, and the 5DEV company offering 12K plus a little to anyone who can win using their Shredville Mount, a system which allows one to use road controls on a flat bar. 

Lots of weirdness possibilities this year, which I think is fun. We'll see how it all turns out. 

Okay, that is a wrap for this week! Get out and ride those bikes! Summer is fading fast!

Thursday, August 13, 2026

Two Things

Graphic courtesy of Max Velocity YouTube channel

 Wet Weather, Dumb Decisions Hinder Riding:

I've been wanting to get back on the bike and do some chain lube testing, but the weather isn't having any of that. And neither has my gut, but that part is my fault. I'll explain. 

We've been getting rained on at times when I could go out, and when I have had dry periods, it's been so humid that I just don't have the gumption to pedal through it. Not when the heat index is near or at 100°F. That's not good for me. 

And then I did something dumb last Friday and ate a big bowl of ice cream at a friends ice cream shop he was proud to show me. And on an empty stomach. This caused big intestinal issues over the weekend. (Perhaps I'm more lactose intolerant than I thought), and I suffered like a dog until Monday. So, yeah....

Good times. 

Moving forward, I will have to get in rides whenever I can. Today is sketch. Friday we get more rain, and so on and on...

The good news is this won't last, but this certainly hasn't been a very productive time. 

The Last Chapter

Well, this week I finally got my BRAN 44 jersey. To be fair, I did not order it in time for the ride. Also, it came right when it was expected to. No disappointments there. 

But it is the final line in the BRAN 44 story for me. It's kind of funny now, but I was not really knowing what to expect out of this ride when I left Waterloo, Iowa on June 5th. 

It could have been a real slog. I wasn't trained up as good as I would have liked to have been, but then again, I had about a month's notice, so..... 

It could have been a bad experience. But thankfully, it was far from that. In fact, it was more than I could have imagined it to be. Which isn't usually the expectation for an event. 

But BRAN lived up to the reputation I had heard about it from others and even they did not convey the experience I actually had, but then again, who could have predicted I'd randomly meet Jacquie Phelan on this ride? 

Well, the answer is no one could have. And that wasn't all.  

My family thinks the jersey looks nice. It is pretty cool. 

I did not have to get it. I have more jerseys than I really need. But as I told the family, I may never get out to ride that ride again, so...why not? It's a good souvenir, at the least, and a decent jersey which is unlike anything else in my collection. So, it works for me. 

I met some very nice people on this ride. I think it is one of the benefits of any sort of travel. You leave behind the masks of socialization, the ability to hide behind a keyboard, and deal with people face to face on common ground. It's something more of us should be doing. 

Yeah.....I suppose for younger people it could be scary. But maybe us older folks are just putting limitations on them with our views of screen-raised younginz. I think this kind of backdrop to looking at society is not exactly how it works out in the field. There, in rural Nebraska, I was riding with a teenager. He got along with us just fine. It didn't mater that I was his grandfather's age, and I didn't care that he was a bit of a whippersnapper. We communicated just fine. 

But more to the point - we had different world views. Many of us did. But.....it doesn't really matter when you are together encouraging each other up steep hills. We are more the same than we think. 

That's what this jersey will remind me of when I wear it.  

Wednesday, August 12, 2026

Rim Wars: Sometimes The Solution Is Right In Front Of You.

Just the other day 'shiggy person' asked me to see if I had a Surly Extraterrestrial to measure. Well, in fact, I do. 

The wheel set I rode last year for the Ride For Jacob is the original wheel set from a Trek Sawyer I used to have, Because the wheel was spec'ed with a heavy Shimano hub set, I was not too stoked about riding them and ended up throwing various different wheels at that bike until I sold it. 

The ironic bit is that the Sawyer had the Chris King hubs on it when I sold it. But those were offered back to me earlier this year and I bought them to use for a nice wheel set for the Fargo Gen I,

Which....again in a bit of irony..was the bike I used the Bontrager Duster/Shimano hub set on when I did the Ride For Jacob last year. Again, this wheel set hasn't been a favorite of mine but the Duster rims best suited the Extraterrestrials, so I rolled them. 

So, while I was measuring the Extraterrestrial for 'shiggy', (62.63mm @ 19psi, by the way), I realized that I would like this wheel a lot better if the Chris King hubs were laced in their. 

Boom.....

So I think this is the direction I'm going to go in. I'll set up the Dusters with the King hub set. Then The Surly tires will go back on. Problem solved. 

Tuesday, August 11, 2026

Chasing The Latest

Prototype Wilde 32"er Image courtesy of Wilde Bicycle Co.
The buzz around 32" wheels I see in some circles reminds me of whenever anything new comes out. "New" as in "technological advancements", which is a debatable subject all on its own. 

But let's say for argument that something comes out which early adopters and testers say is actually an advantage. This is all it seems to take to conjure up a certain psychological need in cyclists brains to "have to have it". 

I see it all the time. Electronic shifting, disc brakes, 'one more gear' on the cassette. All things certain cyclists jumped onboard with while another segment of cyclists deride said idea. 

Remember when disc brakes were being discussed for road racing bikes? I saw an article referencing this over the weekend. This was ten years ago, and there were heated discussions about how the rotors were going to slice up people in crashes, and how the technology to run disc brakes was heavier. Some said disc brakes would open up a new world in terms of lower wheel weights and tire options. 

The adopters were right in this instance. That worked out. Now try finding a rim brake road bike in any form. They are rare now. But the main point was that there were adopters and detractors. Sometimes the adopters are right, sometimes they are not. But should disc brakes eliminate rim brake road bikes? Seems this is the way. 

I still hold that 1X is - overall - not the right thing for most bicycles. This is one which came about mainly due to MTB. More than 11 speeds seems like another thing people adopted 'just because' it was the latest thing. So, I could go on. But this is a subject I find a bit fascinating. 

The chasing of the latest and "greatest" and passing on of things proven to work and work well is an ongoing trend in cycling lasting decades. People are fickle. I don't ever see this ending, and frankly, this is what drives a lot in the world of cycling. 

Monday, August 10, 2026

Virtual Ride For Jacob Report: Pedro del Río Muñoz

A surprise showed up in my inbox this past weekend. It was a very nice message from Pedro del Rio Munoz, a reader from Spain. Pedro may strike a memory for some of you as he has submitted reports for the Virtual Turkey Burn Ride and is a regular in the comments. 

So, here is Pedro's report, as he sent it to me with a lot of nice imagery. It means a lot to me that anyone would take the time and effort to honor my deceased son, Jacob, and especially so from someone overseas. What an honor! Thank you, Pedro! 

And with no further fanfare......

Ride for Jacob 2026

Well, Mr. Guitar Ted has inspired us once again, this time with an incredibly sad but beautiful reason to ride. And I would very much like my support to reach him from here.

For reasons that aren't important and don't really belong in this story, I had barely ridden since January, so this was an excellent reason to get back into a good habit.

I met up with a friend and suggested a route that I really enjoy. Completely flat. Technically very easy. Mostly gravel, with around 7 km of tarmac, for a total of 61 km.

There was only one condition: we would take it easy, and if we found an open bar or café along the way, we would stop for coffee.

Sadly, the coffee part never happened.

We set off at 7:00 a.m. from our meeting point and rode around the outskirts of my hometown, El Puerto de Santa María, as dawn began to break. A few cars and a handful of people on their way home after a night out were pretty much all we encountered, so it was a very peaceful start.

As we left town, we had our first taste of dirt and headed onto the trails, where we faced the first climb of the day. A very short 10% ramp, less than 400 metres long.


 
From there, it was dirt tracks all the way to the next city, Jerez de la Frontera. Riding through Jerez with the sun already up but still low in the sky is quite something. We crossed right through the historic centre and the Santiago neighborhood, with its 15th–16th century church. The silence of an area that is usually busy makes riding through it at that hour rather special.

From there, the route really begins.

Good gravel roads, surrounded by farmland, now dry and waiting for the next planting season.


As the route progresses, so does the sun — and the temperature. At this time of year, temperatures quickly reach 30°C, so we went through quite a lot of water.

We were firmly in touring mode. Zone 1, for those who still insist on calling everything  "training" 

We rode along having a pleasant conversation, mixed with those moments when each of us was simply lost in our own thoughts.


 
In my case, and especially on this ride, many of those thoughts were obviously with Mr. Guitar Ted and his family. I found myself wondering how I would face such a sad and terrible situation.

The support of family, friends and community must surely be fundamental when facing something that, perhaps, can never truly be understood.

And somewhere between conversation and reflection, the kilometres kept passing.


 

Despite my very obvious lack of cycling fitness, I held up surprisingly well — and, importantly, my backside didn't complain about the saddle.

My Ergon is probably one of the most comfortable saddles I've ever owned, and it 's quite easy to adjust. My other saddle, a Brooks Cambium C15, is comfortable too, but much more difficult to dial in and get that feeling just right.

My trusty Jones Spaceframe, running 2.8-inch tyres, is certainly not the world's greatest gravel bike. It's heavy, not particularly aerodynamic, has Plus tyres...

But somehow, for me, it has become a combination I absolutely love.I find it incredibly comfortable for simply riding, riding and riding. I feel integrated into the frame rather than perched on top of it, with my weight supported by the saddle and pedals —something I really like. And its length makes it extremely stable.

All of that helped me finish those 61 kilometres tired, but happy.


I hope that, wherever Jacob may be, my prayers reached him.

Wishing strength to your entire family.

El Puerto de Santa María, Spain

Ride for Jacob 2026 – Sunday 26 th July 2026

Written: 9 August 2026

Pedro

Sunday, August 09, 2026

The Guitar Ted Lube-Off 2026: SILCA Super-Secret v2 Update 1

 NOTICE:  The Guitar Ted 'Lube-Off' is a comparison of different lubrication products for bicycle chains that is undertaken in 'real world' conditions in a set way. Then I compare and contrast the results with past 'Lube-Off' products to see "which one is best for me". This is done for entertainment purposes and the reader should apply their own reasoning and discernment while reading my 'Lube-Off' entries. What works for me may not work for you at all. 

This update on the testing will focus on the SILCA Super-Secret v2 lubricant. The cleaning procedure and application procedure will be covered in this update. The next update will have the first ride impressions. 

There was a hiccup with the test, and it relates to a product I tried which I reviewed HERE. I'll get into all of what this entails here soon, but first let's dig into this new version of the previous Lube-Off winner, the Super Secret wax based lubricant. 

What It Is: Super Secret lube was developed around six to seven years ago. SILCA was asked by some of the Pro teams they sponsor to revisit this product with the aim to update it. Specifically SILCA was asked to increase the wet weather performance of its original formula. 

SILCA took this feedback, and other feedback from Pro riders, to Purdue University. Over the course of a couple of years of research and development, SILCA now believes it has improved Super-Secret to a level at which they claim the new formula actually works as well as a waxed chain. 

First of all, SILCA did not change the ingredients of Super-Secret, but through their work at Purdue University, they were able to maximize the ingredients to be better at what each ingredient does. So much so that SILCA has now dubbed this as their version 2 of the lubricant.  

It has some pretty heady claims, this Super-Secret v2. Slicker, faster, and longer lasting. And that wet weather performance was improved greatly. So, the expectation here is that Super-Secret will now separate itself from the Flowerpower lubricant I tested in the last Lube-Off. In those tests, the Flowerpower was very close in performance to the original Super-Secret formula. 

Super-Secret v2 comes in 2oz, 4oz, and 8oz bottles at $16.00, $25.00, and $45.00 respectively. Hit the link above to see more details on this lubricant or to purchase some. (I am not affiliated with SILCA in any way.) 

Cleaning and Application Process: 

The Super-Secret v2 has been applied to the XLBird, (after I cleaned it!)

 SILCA requests the lube be put on a clean chain. I tried using the Stan's degreaser product, but it would not dry up, and since I did not want to use water to rinse it out, (this would have required I use something to drive out the water), I ended up going back to square one and using Finishline's Speed Degreaser which off-gasses to leave no moisture or residue. Then I shook the bottle vigorously and applied a single dollop of the lubricant on each chain roller. 

After this I back-pedaled the bike for one minute. SILCA requires the rider to alow the bike to sit for at least four hours. I let it cure overnight. 

The result was a dry chain with a slick feel to it. Perfect! Pretty much exactly how Super-Secret has always worked. So, for now it is smooth sailing and ride testing will commence. 

Impressions So Far: 

I think the application process is easy once you get past cleaning the chain, which can be a hassle if you've not cleaned your chain for a while. A clean chain is paramount to achieving good results, so I was picky about this. 

Disregarding the day I lost due to using the wrong degreaser product, I'd give this lube high marks for ease of application. Even the curing time is reasonable. So, top of the charts on this part of the test from my perspective.  

Next On The Lube-Off:

I'm actually going to throw things back to last year's testing and give you all a final word on a lubricant from that round of the Lube-Off. Look for that this coming week. 

Then I'm going to delve into the Flowerpower lube and give you a refresher on how this lubricant has performed, its application procedure, and what I liked and did not like about it. 

In that same post I will also go over the original Super-Secret lube. As for our new, "SECRET" lubricant, I am not allowed to speak about it until September 1st. My hope is that I can give a very comprehensive look at that lube in one shot. I may even have a winner identified by this point, if rides can be strung together with enough mileage to warrant a final verdict. 

So, stay tuned for all of that! September will be here before ya know it, and this Lube-Off promises to be a pretty intense competition. 
 


 

Saturday, August 08, 2026

Rim Wars

Image courtesy of Hates Bicycle
So for my Chris King hub set I still have not decided upon rims to build up wheels from them. I was considering carbon, but the prices for those are a bit intimidating from the standpoint of my use case scenario. I mean, this is a bike that is almost twenty years old now! (Fargo Gen I) So, putting on bling-wheels seems a bit too much for me when I think about this bicycle. Making wheels which would be worth more than the rest of the bike seems....not wise. 

So, I have resigned myself to doing a wheel set in aluminum, just to use these Chris King hubs. Earlier in the week I was referred by a commenter to look at Sun/Ringle' Durocd rims. I also am a big fan of Velocity USA's Blunt SS rims. So, I did a compare and contrast with these two choices. They are remarkably similar in some significant ways. 

The Blunt SS

Image courtesy of Velocity USA

I have experience with this rim and it all has been positive. It's a fairly light rim for the inner width at a claimed 425 grams each. These build up nicely and look really good. 

For my uses it would be absolutely fine doing what I'd ask of it. Now, if I were actually mountain biking I would have some reservations. 

The Blunt SS isn't what I would call a rim for really fast, rough riding styles on tough trails. It can be flexy, easily dented, and some say it is problematic doing tubeless tires. (I have never had any issues running Blunt SS's tubeless, so....)

The price for a single Blunt SS 700c rim is $152.00 and these are made in the USA. 

The Sun Duroc 30:

As you can see from the cutaway diagram here, the Sun Duroc 30 is very close in specifications to a Blunt SS. The inner rim width is nearly identical, and in just about every way, the Duroc 30 seems to be analogous to a Blunt SS in the important areas. 

There are two things about the Duroc 30 which distinguish it from the Blunt SS and they are related to each other. 

Firstly, the Duroc 30 is a welded seam rim while the Blunt SS is not. This is a tiny thing in and of itself, but the nod goes to the Duroc here because welded seams can be more durable. Welding can also distort the rim walls, if done poorly, so having not seen any examples of this rim, I cannot say if Sun's production quality is good or no. Based upon other Sun rims I have seen I would guess this is a non-issue. 

The other related thing is weight. A welded seam weighs more than a pin and sleeve one does. So, this bears out as the Duroc 30 is a claimed 465 grams versus the Blunt SS at a claimed 425 grams each. Of course, the Duroc can be heavier just because of its extrusion design also, so we have to account somewhat for this possibility as well. 

The Duroc 30 costs about a hundred bucks each, so a savings of over $100.00 for a pair versus the Velocity product. I do not know where the Duroc is made, but I would hazard a guess that it is not made in the USA. 

Decisions:

I haven't done anything yet, but the Duroc gets some cred from a local rider here I respect, so I would not be afraid to use those rims. The made in USA thing is nice, but at this point spending around $200.00 versus $300.00 or more is a significant difference. One I cannot ignore. 

Soon I will make a decision. What would you do? 

Friday, August 07, 2026

Friday News And Views

Image courtesy of Salsa Cycles
32" Fargo Live Now:

Salsa Cycles announced on Tuesday of this week that 32" Fargo frame sets were available from them now. Steel for now, titanium is yet to come this Fall. 

Comments: A drop bar specific 32" adventure bike? Yes. The Fargo is now available in the largest wheels you can get from Salsa Cycles. This follows the trend of brands getting whatever they can out in 32" wheels as fast as possible ahead of the Big Four brands. 

Although Salsa isn't necessarily a small brand. So this does hit a little differently. We will have to monitor how well this version of the Fargo does, as it may be an indication for the overall impact of 32" wheels on the market. 

But beyond speculation, we can now put some numbers on this Fargo 32"er. The frame, with carbon fork, cost $1,799.00 USD. That is surprising, to a degree, to me. I was speculating this would cost 2K. I was wrong about that. 

Then we see what Salsa estimates the weight of this Fargo with carbon fork is going to be. They are claiming an 8lb 9oz weight, which is only 10 ounces heavier than the steel frame/carbon fork Fargo in the 29"er guise. Not bad for a frame with longer stays. Although, I was a little taken aback by the weight of the frame and fork at first glance. That said, the Fargo never pretended to be a lightweight platform. 

It's an interesting offering, and that Pearl Orchid color is quite nice, if I do say so myself.  

Michael Kolakowski
BRAN Announces New President Of Bicycle Ride Across Nebraska Inc.:

When I was on BRAN earlier this Summer I was made aware the ride is 100% run by volunteers. Their president was also on his last BRAN as the leader of the organization. So this ride was going to be looking for a new President and Vice President for the coming years. 

Having been an event organizer for as many years as I was, and knowing volunteers are the heart and soul of any event, I was concerned about how a new President and Vice President would affect this cool event. Well, my fears were allayed recently concerning this when I received the email sent to past BRAN riders which heralded the news of BRAN's new officers. 

The new President is Michael Kolakowski, and the new Vice President is his wife, Jackie Kolakowski. I rode with Michael all week long at BRAN, and I got to know him well enough to be of the opinion he is the perfect person to lead this ride into the future. 

Michael is an avid cyclist, being a commuter in Omaha and loving his country rides in a way I could relate to easily. He is a BRAN veteran, having been on many past BRAN rides and he knows all the ins and outs of BRAN as a rider and as a volunteer on the team for several years. 

Of course, I do not know Jackie, but I have no doubt she is as capable as Michael is, and by his own admission, a very smart and capable individual in her own right. So I feel she will also be a compliment to BRAN and its future.

Congratulations Michael and Jackie!

Guitar Ted Podcast Update:

I haven't been promoting the podcast here as much as I probably should be. So, let me take a bit of space here to do this.....

We're putting out shows at around one every two weeks or so. The latest ones, "Episodes 112, 113, and 114 are all pretty new. If you haven't listened for a while, you can catch up with us on those episodes. 

We  are hoping to get a few interviews done before we take our traditional break in December. Look for those to be sprinkled throughout the coming months. 

Finally, a big 'Thank You" to all who have expressed their feelings about the podcast to me of late. It appears several of you listen faithfully whenever we post a new episode.  N.Y. Roll and I are always amazed by any responses we get. So, again - Thanks!! 

I think we are going to get about 15 more episodes in before the end of 2026 which would make this year the record for episodes released. Year four isn't quite over with yet, but we are looking forward to Year 5 with anticipation.  

Embark: Good Stuff!

About four years ago, N.Y. Roll brought back a nutritional product for cycling, (and more), by a Wisconsin based company called Embark. I tried it out and it worked so well I actually bought some and tested it out for the site HERE. 

Oddly enough, I don't do enough events anymore that I think about on the bike nutrition, but the Ride For Jacob got me thinking about this again. Actually, you could say this started percolating in my mind during BRAN. 

Anyway, I landed on Embark in my research on the site here. I actually had a spare packet of the stuff and used it up this Spring, but at that time I did not place another order for it. 

Well, this past week I went ahead and got some more. They are currently running a sale on their Embark Maple Energy packets if you are curious. I highly recommend the stuff. 

By the way, I am not affiliated with Embark in any way, so I don't get anything out of it if you decide to check them out. It's just really good, natural energy which tastes great and can be used straight, in water bottles, or in cooking. 

That is a wrap on this week! Thanks for reading Guitar Ted Productions. Now get out there and ride those bicycles.  

Thursday, August 06, 2026

Review: Stan's Biobased Drivetrain Cleaner

NOTE: Stan's sent over a bottle of their Biobased Drivetrain Cleaner to Guitar Ted Productions at no charge for test and review purposes. Stan's is not bribing or paying Guitar Ted for this review. All opinions are Guitar Ted's.

Cleaning parts can be a challenge when it comes to bicycles. Exposed drive train style parts like chains, derailleurs, and chainrings and cogs can prove to be quite a challenge to clean up. This becomes an issue especially when you are about to set up your bicycle with chain lubricant. Getting a drive train cleaned up to the "nth degree" is paramount to getting the best chain lube performance. Cheat on this exercise and you will pay the price in lost watts, drive train performance, and in earlier parts replacement than necessary. 

But taking off parts and replacing them after cleaning can mean hours in the garage/on the apartment living room floor/in the basement and you probably do not have all the proper tools for doing this anyway. Why can't we just, you know, clean up things while they are on the bike? 

The answer is "You can", but you need to know what to use and how to use it. I'll link my article on how I clean my bikes HERE if you want to get into the nitty-gritty of my techniques. (Note - That link takes you to an article with many other linked articles. Please refer to all of those before asking any questions here about drive train/bicycle cleaning)

What It Is: Okay, back to the subject at hand. Stan's Biobased products, many of which I have reviewed here before, are all made with a singular focus which is to be as environmentally friendly as possible. The Biobased Drivetrain Cleaner is no different. The bottle says this product uses "WPL biobased tech". WPL (Whistler Performance Labs) is a Canadian based company focused on biobased lubricants, cleaners, and grease products. I actuall reviewed a WPL lubricant in a previous Guitar Ted Lube-Off session HERE. 

Biobased Drivetrain Cleaner comes in a 500ml spray bottle and costs $20.00 USD. Following are some features listed which were taken from the webpage for this product:

  •  Powerful Formula: cuts through grease and grime, yet it's gentle on paint, rubber, plastic, and carbon. Avoid cleaner contact with disc brake rotors and brake pads
  • Vegan, Biodegradable, and Plant-based (USDA-certified Biobased pending)
  • PFAS and PTFE-free: safer than petroleum-based products for rubber, carbon, paint, and anodized bike parts
  • Clear and Odorless: no added dyes or scents
  • Made in Canada

How I Used It: My main usage for the Biobased Drivetrain Cleaner was to get my chains ready for the next Lube-Off session, referred to earlier in the week HERE. The label directions indicated that one should use a liberal amount of product on a chain, (or cassette, chain rings if so desired) and use a brush to scrub off any build-up. Then the label instructs you to do something I do not agree with, but it makes sense from the basis of what this product's philosophy is based upon. 

The instructions direct you to rinse chains, cassettes, or chain rings with water.  That's certainly "enviromentally friendly", but in the case of a chain, I really don't want to introduce water into all the spaces between the rollers and pins. If I had rinsed my chains with water, I would then want to use compressed air to blow out any excess water residue, (extremely messy), or use a chemical product like alcohol, or brake cleaner, or....something similar, (defeats environmental benefits) to displace the water and hopefully leave no residues behind. 

So, I did not rinse my chains with water. I tried drying out the chains and wiping off as much as I could with a rag. This did not leave a satisfactory result. It fouled the chain lube I applied afterward, because I could not drive out all the degreaser product from the rollers and pins of the chain. While I could have removed the chain and obtained a better result with rinsing and air drying the chain, this defeats the purposes of my testing.  

Final Verdict: Stan's Biobased Drivetrain Cleaner is a good product if you can rinse with water and not worry about oxidation from the water afterward in the tight spaces which define a typical bicycle drive train. I like the environmental aspect, which I think makes this a product worth checking out. The Biobased Drivetrain Cleaner does blast away build-up and dissolves grease well. It's just that - for me - using it on a chain is problematic in that you must rinse off the product with water, (or solvent of choice if you don't care about being consistent with the product philosophy) Then you can avoid residue which this product leaves behind and which will not dry off a chain, in particular. Add in the self-imposed parameter of not removing parts, and this becomes an issue. 

So, I would recommend this with caveats as to how this product needs a rinsing after use. How you go about that rinsing is up to you. Then again, if you really are more concerned with ease of use and convenience, you probably are looking at a different degreaser product that is a "one-shot" and done kind of procedure. I can recommend Finishline's "Speed Degreaser" is that is your aim.  

Wednesday, August 05, 2026

Two Things

Getting Back To That Wheel Project:

Last Spring I received back my old Chris King hub set. I mentioned then I wanted to build these up into wheels for the Fargo Gen I. Then.....

Crickets.

Why? Well, first off I was a bit paralyzed by prices for carbon rims. I can afford them, that isn't the problem. The problem is if I believe they are what I truly need to be spending money on for that bike. 

I still believe Velocity Blunt SS rims would be just fine and do the job well. I probably will end up getting a set. But I did not back then because BRAN then came along and well, I spent a bunch of money getting ready for that. 

Then Summer came along and I got distracted, as one does, by other things. Now we're going into Fall and my mind is settling into what I need to get done before Winter comes along, besides getting the house ready. 

This wheel set build is on the radar. There is a slight chance I go in a different direction than indicated here, but the Blunt SS is the leader in the clubhouse as of now. Unless I can be persuaded otherwise....

What It Is All About:

Let's see..... Gravel Worlds is coming up. I haven't seen a lot about CORE4 this year (?), and then you have a few, smaller events which are fairly local which I've seen some buzz about. Does anyone know who is winning the UCI Gravel series events or the Gravel Earth events? 

I don't see people yakking about those things much at all, not on social media anyway. barely any coverage on the ol' innergoogles either. So.....does anyone really care about these races? 

I have seen a LOT more stuff about rides, small gravel competitions, and bike packing adventures, all non-sanctioned, by the way, than I have any of the "big-time" events. 

When is the cycling industry going to catch on to this? Will they ever? And maybe it doesn't matter. I will say that our local shops, all two of them, are still not engaging with the scene and haven't for years. This is Iowa. Gravel is literally everywhere, yet these shops seemingly are blind to it. I worked at one of them for many years and all that shop cared about was a twice yearly road time trial series that drew a small smattering of locals. 

But gravel cycling? Nah..... Whatever. 

The thing is, gravel cycling is the meat of cycling activities, not some weirdo thing going on out in the country. Well.....some of us are weirdos, yes. But you know what I am getting at here. Gravel is the meat of what is going on and you cannot, as a business, treat it like cole slaw. If you do, it is at your own risk. 

Tuesday, August 04, 2026

Ghost Town Discovery

I was cruising Facebook the other day and I came across a post about an Iowa ghost town called "White Pigeon", a town which used to be in Keokuk County. As I read about it, I realized I may have been by the area doing Trans Iowa recon, or maybe it was on a route I came up with. 

Well, as it turns out, Trans Iowa v14 went right by the spot where this ghost town used to be! I don't know about anyone else, but I was excited to learn about this. 

As is the case for me involving Trans Iowas, I recall this road well. The situation was from the last set of cues for the route, and I was trying to find a way back toward Grinnell without adding a ton of extra miles. 

Keeping in mind that this route did not come together until very late into the process, I was also under a lot of self-inflicted pressure to find roads which would not only work, but be something of interest. I guess I stumbled onto something I had no idea of at the time! Had I known about this, I surely would have made a big deal about the route going by a ghost town. 

So, here's a bit of history gleaned from The 29th State page on Facebook. White Pigeon was founded before the Civil War and grew to a decent size with several businesses and churches in its day. However; the railroad bypassed the site of the town, which in the 19th Century was a death sentence for any village. 

White Pigeon hung on for many years though, and it was only after the last business in town burned to the ground around 1930 that it disappeared from the landscape. The only thing remaining is the cemetery which is on the West side of the road from the original town plat. 

From my viewpoint at the time, the gravel road going North from our final checkpoint in Webster, Iowa, was an interesting road because it had a few turns in it. Otherwise I may have chosen another route. Somewhere between mile 2,4 on the cues and mile 5.7 on the cue sheet you would have ridden by the cemetery and the old town site would have been on your right side. 

From the 1895 Atlas of Keokuk County, Iowa by H.G. Bishop

If I'm not mistaken, this road also bears right North of the old site of White Pigeon and turns into a pretty cool Level B Road. That "T"s into H Avenue and the route went North from there. 

I also may have utilized that Level B Road in another Trans Iowa, but I don't think we went South by White Pigeon in that one. 

Anyway, that was a fun discovery, and I am proud now to know I routed Trans Iowa by a legit ghost town. 

I'm also sure we went by others, and some villages we went through maybe will become ghost towns in the future.  

This is partially why I love riding rural areas. I like history, and finding out about the past is good because sometimes there are lessons we can learn from. You never know what you'll find in Iowa, that's for certain, and I'm sure other areas are similarly graced with nuggets of history just waiting for you to discover by bicycle.  

Monday, August 03, 2026

Guitar Ted Lube-Off 2026

  NOTICE:  The Guitar Ted 'Lube-Off' is a comparison of different lubrication products for bicycle chains that is undertaken in 'real world' conditions in a set way. Then I compare and contrast the results with past 'Lube-Off' products to see "which one is best for me". This is done for entertainment purposes and the reader should apply their own reasoning and discernment while reading my 'Lube-Off' entries. What works for me may not work for you at all. 

The Guitar Ted Lube-Off 2026:

Welcome to another totally unscientific look at what lubricant passes my tests to see what chain lube works best on dusty Iowa gravel roads. 

Over the years technology has changed tremendously in terms of chain lubricants. Early on it was the old petroleum based lubes that were tested alongside some chemical stews which then kind of took over for a while. Now things have moved on from there to wax based lubricants with a lot less environmental concerns.  

A Note About Chain Waxing: You may wonder why I will not test chain waxing procedures and products. I'll tell you why - It's more hassle, more equipment, and I don't want to do it. So, while taking off a chain and dipping it in some waxy soup might be better, (more on that in a minute), it is not easier than just cleaning the chain and lubing the chain while it is on the bike. 

I like "easy". I also like spending less money. Maybe I'm a weirdo..... 

 This season I am sort of continuing 2025's Lube-Off and melding it in with two newer contenders. One is the new Super-Secret v2 lubricant from SILCA. One is actually now truly"super-secret" as it hasn't been released yet to the public. I cannot show you this lube .......yet. The embargo on that lubricant lifts in about a month from now. However; I am already using it, so I'll have plenty to say about it in September. 

Image courtesy of SILCA
The Contenders:

The aforementioned SECRET lube, which I cannot talk about yet. It's on a bike I have already. Stay tuned for more on it.

The new Super-Secret v2 lube from SILCA. It is an "improvement in every way" over the original Super-Secret lube. I also already have this lube and it is also already on a bike I have here. 

Original Super-Secret from SILCA. Of course, the previous Lube-Off king has to be in this test. Of course, it also is already on a bike I own. 

Effetto Mariposa Flowerpower wax lubricant. I've said this one is so close to Super-Secret lube that it may as well be also a top choice for gravel in dry conditions. Yes, you guessed it, it's already on one of the bikes here. 

Expectations: 

I have a goal of getting 300 miles on the new lubes and whatever I can get on the old contenders. I already know what I have in the older test lubes, so getting a ton of miles in on those isn't a huge deal. But yeah, I want some reference which will be fresh in my mind to remind me what I liked about those lubricants. 

I then expect to uncover which lubricant was best at keeping the chain clean, the cassette clean, the jockey wheels clean, and still is slippery and making my chain "fast".  It should be noted that SILCA claims its newest Super-Secret formula is "just as fast" as waxing a chain in a pot. So, if true, it would be another reason to avoid all that fuss and clutter. 

The Process:

Each chain will be cleaned with Stan's BioBased Degreaser. It's a fairly new product which I have found recently. It does a pretty good job of cleaning a chain on the bike. Using the same degreaser for all the contenders will keep the playing field even. 

Then I will ride each contender in dusty gravel in and around Waterloo, Iowa where I live. The dust here gets into every nook and cranny of a bike and so I know it will challenge each lubricant to the maximum of its capabilities and its claims of performance by the brands. 

In the end, I look for cleanliness. A clean chain, jockey wheels, and cassette mean a faster drive train. IF the lubricant can keep the chain clean, and IF it can do this while still lubricating the chain, that lube is a winner. 

The application process will also be judged alongside these other concerns. Reapplication intervals also matter. SILCA is also claiming the new v2 Super-Secret is able to withstand wet conditions as well. So maybe I'll do a bit of extra testing to see about this. The other lubricants definitely do not hold up in the wet.  

Then whatever process each brand requires for application will be followed. And there are some varied asks of the user to apply the different lubes. So I think you readers will find that part interesting. Then it will just be the riding and hopefully by sometime mid-Fall I'll have results to share. 

So there you go! Stay tuned for the next update on installation for the SILCA, Effetto Mariposa, and the "SECRET" lube, (September update), soon. 

Sunday, August 02, 2026

It's Been A Year

Jacob Stevenson at Iowa Speedway, 2017
Whew...... Here we are a year removed from that terrible day in 2025. Most of you know what I am talking about, but if you are new here, you can read about what happened HERE. 

I wrote that post the day after he died. I guess I was on autopilot. I have to say the shock of losing my son unexpectedly probably hadn't sunk in quite yet there. I re-read that post and it seems so detached from reality now. 

But it was all I could say at the time. Since then, the reality has hit me several times like a big truck. Other times it is sneaky and persistent. Haunting, tortuous feelings and memories of the day one year ago are hard to escape. 

But I will not hide the fact that my faith in God has been the thing which has carried me along until this day. It is that faith which will carry me further on up the road until it is my time to leave this Earth. Without that, and God's grace, I wouldn't be here to write to you today, and I know this to be true. 

The view  from my chair on the porch now. 

Afternoons on weekdays were times I looked forward to seeing Jacob come home from work during most of 2024 and 2025. He started out driving in 2023, maybe late 2022, I don't remember now. I found a picture showing when he crashed out a lady's white fence back in February of '23, so he had been driving for a bit by then. Anyway....

I got to be kind of a 'mother hen', waiting out on the porch for him to drive up. He got off work at the Criterion machine shop at 2:30pm. He usually would drive up in front of the house by 2:45, maybe ten till three. 

I'd sit and talk with him a bit, if he was in the mood for it, then I'd leave for work at about 3:30pm to work my 4:00 - 8:00pm shift at the Collective. If I had a day off I would go inside with him and he'd usually get on the internet and play his online games. This was in nice weather, of course, not in Winter. I remember the Summertime of 2025 especially, since he had the 4Runner and seeing him pull up in that was always a relief for me. 

He was home again. 

He'd get out, look up at me over the roof of the 4Runner since he was so tall, and say "Hey Dad.", then he'd grab the messenger bag with his stuff, and come up to the porch. Sometimes he'd stop and talk, other times he'd walk right in. 

Of course, the one day he stopped and shared that meal with me a week or so before he died is really a special time for me. He had gone to Taco Johns and typically he didn't share that with me, but he did that one time before he died.....

And now it has been a year. I look out from the porch now from my chair. Something is missing. He isn't going to pull up anymore. He won't be grabbing that messenger bag out of the back seat, the bag I used to commute to work with. He won't be sharing Taco John's with me, or even just walking past me to get to his video game as quick as he could. 

Why? 

Because he went Home. That's why......

 So, I wanted to mark this day here on the blog. I appreciate all your thoughts and prayers. They mean a lot to me, as does your reading this blog. 

See ya here again tomorrow.... 
 

Saturday, August 01, 2026

House Cleaning

After The Ride For Jacob I realized I had better get to sprucing up my gravel bikes. I hadn't as much laid a hand to the pink BMC since I came back from BRAN in June and the Ride For Jacob was duuuusty! So, the metric century left a lot of residue on the ol' Peregrine Mk4. 

On the one hand, it is good to have this problem. It means I actually had rides and miles on gravel. This is good! So far this year has been better in this regard. Although local riding has suffered a bit with the heat lately. 

But there is the other side. I clean bikes all the time at the Collective. I really don't want to clean bikes when I get home. However; those two bikes in particular were filthy. It was time. 

Plus, as mentioned yesterday in the FN&V, I have new stuff to test on the chains and I may as well clean up everything while I am cleaning the chains, cassettes, and cranks. I knew I would be happy about it afterward, and I was. 

It is just that it is really tedious work. 

The Dirty XLBird

I have the BMC cleaned up now and the XLBird is getting done as well. Then I will just go out and get them all dirty again. It's kind of like making a bed. You're just going to sleep in it again this evening, so why make it all pretty in the morning? 

That is certainly one way to look at things, but I also understand there are intangibles at play. You often can give yourself a sense of worth and well-being by cleaning up yourself and your surroundings. A neatly made bed gives you a sense of order and calm which is valuable. So this is why you should clean your bicycle. It makes you feel better. 

Really. 

But yeah, it can feel like an endless task if you ride a lot!