Monday, September 20, 2021

Fall Views: GTDR/ToBHC - Part 1

Getting an early start
 I had been planning on a big ride for quite some time. I wrote about the route here before, calling it "The Tour of Black Hawk County". That was back in July, but those plans had to be put on hold when I decided I needed to focus in on Gravel Worlds preparations. 

Of course, I would need to recover from the 116 miles I got in at Gravel Worlds, so I planned on maybe getting at this ToBHC idea in a couple of weeks after that. But things didn't pan out for me to get to the route until this past weekend when everything came together for an attempt. I also decided that this would be my "GTDR" for the year. (Guitar Ted Death Ride)

When I say "everything came together" to get this done, I mean that. In the sense of getting the time away from the family, which was foremost of the things I needed to have happen, and in the sense of some testing for RidingGravel.com as well. Then there was the weather. Leading up to last weekend the forecast looked great. Not too hot, decent winds, and most importantly - no rain. So about a week and a half ago I pulled the trigger on September 18th as being the target date for the GTDR/ToBHC ride. 

I was excited. I really had been looking forward to getting this route done for a long time and I had a certain disquiet in my soul over not having gotten around to it in July and August. But I suppose that only forged my resolve deeper and stronger for actually getting the entire route completed. I am thankful for that, because, as you will see, it took everything I had to make the day a success. 

As the day approached, I made final preparations. I was going to take the Noble Bikes GX5 and a couple of test items for Riding Gravel showed up in time to get installed on the bike. Then I looked at the weather. What?!! The low temperature at around the time I wanted to get going was to be 40 degrees?!! It hadn't been that cold for months! But to compound matters, the temperature was to rise up into the low 80's by afternoon. Wow! Did that ever change my plans for what I was going to wear! I would need to ward off early morning cold and be prepared for Summer-like afternoon temperatures! 

With all of that lead-up to this 'event', I did the best I could and I set a start time of 6:00am, which meant I would need lights for the first hour of the ride. My goal was to finish by 5:00pm or sooner. So, with all of that, I set the alarm for 5:00am and laid my clothes out the night before so I could vamoose as soon as possible the next morning. 

Morning blushes as I head East on the GTDR/ToBHC route

Not a cloud in the sky. It would remain this way all day.

I ate a small breakfast and got going early as I ended up waking up at 4:40am instead. I made it to my starting point, which was the City Park in Janesville, Iowa, at the Northwestern end of Black Hawk County. The plan was to take the county line road East, and in this way I figured that I would get a treat of watching the Sun rise. 

There is something about getting up and starting a ride before dawn that I love. I don't do this enough, but I was sure glad I did for this ride because the morning was about as perfect as one could ask for visually. Not a cloud in sight, no wind at all, and the only 'bad' thing was how cold it was. It was really cold! I barely had enough on and riding hard would be the only way I would get warmth in the body. The County maintainer made sure I had plenty of adversity to force me to ride hard too, because the opening miles were on deep, fresh gravel. It was really tough sledding in the dark. 

Eventually there was enough light to grab some scenery shots

The anticipation of the Sun coming up was high. I needed warmth!

The roads were tough. I had a big problem finding any line, and this loose, deep gravel was really working my legs. Fortunately, as I said, there was zero wind to contend with at this point. Had there been any wind at all, especially a headwind of some sort, I would have been in deep trouble as far as finishing the route. I had to burn a lot of matches just to keep up an average speed which would get me to Janesville again by 5:00pm. 

Juuust about there!

And there She is!

By the time the Sun had come up I was working the Northerly bits and was now getting closer to the Northeastern reaches of the county. Finally the roads out here relented with the fresh stuff and I was starting to find some good lines. The route had gone pretty much straight East by this point with only one turn South of a mile, then off Eastward again. Now I would find myself on some pavement for a bit as I worked around the disruptions to "The Grid" caused by the Wapsipinnicon River. 

After a slow-ish start, due to the fresh, deep gravel, I was starting to gain some 'time-in-the-bank' towards my goal of finishing by 5:00pm. I had no computer on my bike, by the way, since my GPS has been smashed. So, I was navigating by my cue sheets I had made and paying attention to the signs on the corners. I knew the roads well enough from having done "The Quest" last year, so mileage to turns wasn't all that important. I did have mileage listed on the cues though, so I could mark my progress against time, which I had available via the Apple Watch on my wrist. 

Finally I started moving South, as I had reached, pretty much, the far Northeastern corner of Black Hawk County. One side of the county was done! Now onward.......

Tomorrow: Part two of my GTDR/ToBHC

Fall Views: GTDR/ToBHC - Part 1

Getting an early start
 I had been planning on a big ride for quite some time. I wrote about the route here before, calling it "The Tour of Black Hawk County". That was back in July, but those plans had to be put on hold when I decided I needed to focus in on Gravel Worlds preparations. 

Of course, I would need to recover from the 116 miles I got in at Gravel Worlds, so I planned on maybe getting at this ToBHC idea in a couple of weeks after that. But things didn't pan out for me to get to the route until this past weekend when everything came together for an attempt. I also decided that this would be my "GTDR" for the year. (Guitar Ted Death Ride)

When I say "everything came together" to get this done, I mean that. In the sense of getting the time away from the family, which was foremost of the things I needed to have happen, and in the sense of some testing for RidingGravel.com as well. Then there was the weather. Leading up to last weekend the forecast looked great. Not too hot, decent winds, and most importantly - no rain. So about a week and a half ago I pulled the trigger on September 18th as being the target date for the GTDR/ToBHC ride. 

I was excited. I really had been looking forward to getting this route done for a long time and I had a certain disquiet in my soul over not having gotten around to it in July and August. But I suppose that only forged my resolve deeper and stronger for actually getting the entire route completed. I am thankful for that, because, as you will see, it took everything I had to make the day a success. 

As the day approached, I made final preparations. I was going to take the Noble Bikes GX5 and a couple of test items for Riding Gravel showed up in time to get installed on the bike. Then I looked at the weather. What?!! The low temperature at around the time I wanted to get going was to be 40 degrees?!! It hadn't been that cold for months! But to compound matters, the temperature was to rise up into the low 80's by afternoon. Wow! Did that ever change my plans for what I was going to wear! I would need to ward off early morning cold and be prepared for Summer-like afternoon temperatures! 

With all of that lead-up to this 'event', I did the best I could and I set a start time of 6:00am, which meant I would need lights for the first hour of the ride. My goal was to finish by 5:00pm or sooner. So, with all of that, I set the alarm for 5:00am and laid my clothes out the night before so I could vamoose as soon as possible the next morning. 

Morning blushes as I head East on the GTDR/ToBHC route

Not a cloud in the sky. It would remain this way all day.

I ate a small breakfast and got going early as I ended up waking up at 4:40am instead. I made it to my starting point, which was the City Park in Janesville, Iowa, at the Northwestern end of Black Hawk County. The plan was to take the county line road East, and in this way I figured that I would get a treat of watching the Sun rise. 

There is something about getting up and starting a ride before dawn that I love. I don't do this enough, but I was sure glad I did for this ride because the morning was about as perfect as one could ask for visually. Not a cloud in sight, no wind at all, and the only 'bad' thing was how cold it was. It was really cold! I barely had enough on and riding hard would be the only way I would get warmth in the body. The County maintainer made sure I had plenty of adversity to force me to ride hard too, because the opening miles were on deep, fresh gravel. It was really tough sledding in the dark. 

Eventually there was enough light to grab some scenery shots

The anticipation of the Sun coming up was high. I needed warmth!

The roads were tough. I had a big problem finding any line, and this loose, deep gravel was really working my legs. Fortunately, as I said, there was zero wind to contend with at this point. Had there been any wind at all, especially a headwind of some sort, I would have been in deep trouble as far as finishing the route. I had to burn a lot of matches just to keep up an average speed which would get me to Janesville again by 5:00pm. 

Juuust about there!

And there She is!

By the time the Sun had come up I was working the Northerly bits and was now getting closer to the Northeastern reaches of the county. Finally the roads out here relented with the fresh stuff and I was starting to find some good lines. The route had gone pretty much straight East by this point with only one turn South of a mile, then off Eastward again. Now I would find myself on some pavement for a bit as I worked around the disruptions to "The Grid" caused by the Wapsipinnicon River. 

After a slow-ish start, due to the fresh, deep gravel, I was starting to gain some 'time-in-the-bank' towards my goal of finishing by 5:00pm. I had no computer on my bike, by the way, since my GPS has been smashed. So, I was navigating by my cue sheets I had made and paying attention to the signs on the corners. I knew the roads well enough from having done "The Quest" last year, so mileage to turns wasn't all that important. I did have mileage listed on the cues though, so I could mark my progress against time, which I had available via the Apple Watch on my wrist. 

Finally I started moving South, as I had reached, pretty much, the far Northeastern corner of Black Hawk County. One side of the county was done! Now onward.......

Tomorrow: Part two of my GTDR/ToBHC

Saturday, September 18, 2021

Saturday Randomonium

 NOTE: Okay folks, if you haven't been around long enough here to know what a "Randomonium" post is, then here is the deal. I ramble, rant, and randomly moan about all things cycling in one, incohesive, bizarre post. "Randomonium", okay? (Although it could be argued that today's post is more about gravel stuff than anything resembling 'randomness'.)

Whiskey Parts Co. Spanos Bar:

Wednesday of this past week we found out about the new Whiskey Parts Co. Spanos drop bar. It is carbon fiber with a flattened tops section for comfort and a unique compound flare in the drops section. 

The bar will be offered in 40cm, 42cm, 44cm, 46cm, and 48cm widths and will cost $280.00USD. The unique compound flare is 12° at the brake hoods mounting area but then kicks out to a 20° flare below that for greater rider control and wrist clearance. 

Comments: This is a prime example of using carbon fiber to its best benefits. Metal forming would not allow for such complex shapes and tight radius bends which the Spanos Bar has. Yes, carbon fiber can be light, but to my mind, that particular characteristic of carbon fiber componentry has been too oft relied upon to sell stuff made from it. Using carbon fiber to do what metal cannot do, or do very well? That, to my mind, is more interesting for the average cyclist. 

The lay-up of carbon can also be exploited to provide vibration damping benefits as well, or maybe stiffness is desired? Carbon can be made to be that as well and that doesn't necessarily mean lightweight. If the weight is competitive with aluminum, or slightly lighter, I'm of the mind that - as long as the other benefits are exploited - a carbon component can be worth the extra expense. 

Some Updates On The Trans Iowa Book Of Tales & More:

So, this idea is being discussed more and different people are seemingly interested in being a part of things. This on the one hand, is helpful. On the other, it complicates things as I am going to have to pick a direction, (and therefore people) to go in before any real work gets done. 

The basic idea as of now is to do a Patreon, which is a way to generate income for the project while allowing folks the opportunity to see some of the interviews and listen to audio which hopefully will be a part of the 'fact finding' for the book. Benefits other than that would be determined at a later point, but special T.I. commemorative t's, art, stickers, or such stuff might be a part of this. 

I also was surprised by a request to look at a website project which was made by a former T.I. rider as a way to gather the pertinent stuff from the historical blog and the old T.I. site into one place with updated functionality and looks. This came out of left field and I was not expecting anything along these lines to occur now. 

So, this actually may become a thing. There are a few tweaks and some details to work through, but I think once it happens, it will be a nice site to show folks and those of you who had done Trans Iowa should enjoy it. It is a heck of a lot better than anything I would have ever done! Stay tuned on that for now....

So, besides the new site idea and how I may use Patreon I am planning on getting the ball rolling this Fall on this idea and as things get on I will give periodic updates here. Perhaps that may migrate to the site I was shown, perhaps that may end up elsewhere, but for now, just tuck that in your hat if you are interested and keep your eyes peeled here for further announcements.   

Gravel Worlds® Is A Registered Trade Mark:

Earlier last week Gravel Worlds announced that one of its folks, Jason Strobehn, had become full-time on the event and that the event name, "Gravel Worlds" was now an officially recognized trade mark in the United States. 

Comments: Whoa! Now back when we were dinking around putting on these 'events' for like-minded gravel freaks, no one in their right mind saw this coming. I mean not one person. It was the furthest thing from anyone's mind, with the possible exception of Jim Cummings of the Dirty Kanza. He was a bit more 'promotionally minded' than many of us ever were. 

So, now I guess no one else can say 'gravel worlds' in their event marketing. That's kind of interesting, when you think about that. On the one hand it sounds all anti-grassroots, but it keeps others from grabbing that and running with it too, so the guys behind Gravel Worlds can kind of steer that any which way they want to in the future. It'll be interesting to see where it goes from here, but in my humble opinion, that event has already turned the corner and is one of the 'big productions' going forward.  

Mid-South To Require Proof Of COVID Vaccination For '22 Event:

Friday it was revealed that a decision to require everyone attending and riding in the Mid-South gravel event to have a proof of vaccination for the COVID-19 virus was being implemented. This was communicated via their website and on their social media. 

"We will ask everyone to present proof of vaccination or a negative COVID-19 test taken within 72 hours of arrival to the event at check in."  

Many people commented positively on the announcement; however, a few were wondering why there would not be testing for everyone regardless of vaccination status since vaccinated people can still contract and shed virus, (albeit those 'breakthrough' cases are statistically quite low according to most experts.) 

Comments: The Mid-South was arguably the last 'pre-COVID' ran gravel event, although it probably falls within the COVID era in reality. Some commenters were critical of that decision to run the event in mid-March of 2020. So, it stands to reason that the Mid-South organizers would be, perhaps, a bit more on the conservative side this time. 

As far as making everyone attending the Mid-South take a COVID test? I see the validity in that, but practically speaking, it would be difficult to enact such a measure. Besides, it would likely cause the event entry price to be raised significantly. On the other hand, it probably would be the fairest, most safe way to do a big event like Mid-South. 

But with sporting events, concerts, and colleges not doing anything- for the most part - does any of this end up mattering? That's not a question I have an answer for, but upon first glance, the whole "we're wide open vs we're testing/requiring proof" scene is baffling and it would seem that everyone is pretty much on their own in terms of taking risks. I'm not sure a proof of vaccination does anything to reduce risks other than to those who are vaccinated 'if' they contract the virus at Mid-South, or on the way to and back from there. Presumably you won't be welcome, and will not go, if you are a vaccine hold-out. Those unvaccinated people who live there? Pfft! I don't have an answer. 

That's a wrap for this Randomonium. Thanks for reading! 

Saturday Randomonium

 NOTE: Okay folks, if you haven't been around long enough here to know what a "Randomonium" post is, then here is the deal. I ramble, rant, and randomly moan about all things cycling in one, incohesive, bizarre post. "Randomonium", okay? (Although it could be argued that today's post is more about gravel stuff than anything resembling 'randomness'.)

Whiskey Parts Co. Spanos Bar:

Wednesday of this past week we found out about the new Whiskey Parts Co. Spanos drop bar. It is carbon fiber with a flattened tops section for comfort and a unique compound flare in the drops section. 

The bar will be offered in 40cm, 42cm, 44cm, 46cm, and 48cm widths and will cost $280.00USD. The unique compound flare is 12° at the brake hoods mounting area but then kicks out to a 20° flare below that for greater rider control and wrist clearance. 

Comments: This is a prime example of using carbon fiber to its best benefits. Metal forming would not allow for such complex shapes and tight radius bends which the Spanos Bar has. Yes, carbon fiber can be light, but to my mind, that particular characteristic of carbon fiber componentry has been too oft relied upon to sell stuff made from it. Using carbon fiber to do what metal cannot do, or do very well? That, to my mind, is more interesting for the average cyclist. 

The lay-up of carbon can also be exploited to provide vibration damping benefits as well, or maybe stiffness is desired? Carbon can be made to be that as well and that doesn't necessarily mean lightweight. If the weight is competitive with aluminum, or slightly lighter, I'm of the mind that - as long as the other benefits are exploited - a carbon component can be worth the extra expense. 

Some Updates On The Trans Iowa Book Of Tales & More:

So, this idea is being discussed more and different people are seemingly interested in being a part of things. This on the one hand, is helpful. On the other, it complicates things as I am going to have to pick a direction, (and therefore people) to go in before any real work gets done. 

The basic idea as of now is to do a Patreon, which is a way to generate income for the project while allowing folks the opportunity to see some of the interviews and listen to audio which hopefully will be a part of the 'fact finding' for the book. Benefits other than that would be determined at a later point, but special T.I. commemorative t's, art, stickers, or such stuff might be a part of this. 

I also was surprised by a request to look at a website project which was made by a former T.I. rider as a way to gather the pertinent stuff from the historical blog and the old T.I. site into one place with updated functionality and looks. This came out of left field and I was not expecting anything along these lines to occur now. 

So, this actually may become a thing. There are a few tweaks and some details to work through, but I think once it happens, it will be a nice site to show folks and those of you who had done Trans Iowa should enjoy it. It is a heck of a lot better than anything I would have ever done! Stay tuned on that for now....

So, besides the new site idea and how I may use Patreon I am planning on getting the ball rolling this Fall on this idea and as things get on I will give periodic updates here. Perhaps that may migrate to the site I was shown, perhaps that may end up elsewhere, but for now, just tuck that in your hat if you are interested and keep your eyes peeled here for further announcements.   

Gravel Worlds® Is A Registered Trade Mark:

Earlier last week Gravel Worlds announced that one of its folks, Jason Strobehn, had become full-time on the event and that the event name, "Gravel Worlds" was now an officially recognized trade mark in the United States. 

Comments: Whoa! Now back when we were dinking around putting on these 'events' for like-minded gravel freaks, no one in their right mind saw this coming. I mean not one person. It was the furthest thing from anyone's mind, with the possible exception of Jim Cummings of the Dirty Kanza. He was a bit more 'promotionally minded' than many of us ever were. 

So, now I guess no one else can say 'gravel worlds' in their event marketing. That's kind of interesting, when you think about that. On the one hand it sounds all anti-grassroots, but it keeps others from grabbing that and running with it too, so the guys behind Gravel Worlds can kind of steer that any which way they want to in the future. It'll be interesting to see where it goes from here, but in my humble opinion, that event has already turned the corner and is one of the 'big productions' going forward.  

Mid-South To Require Proof Of COVID Vaccination For '22 Event:

Friday it was revealed that a decision to require everyone attending and riding in the Mid-South gravel event to have a proof of vaccination for the COVID-19 virus was being implemented. This was communicated via their website and on their social media. 

"We will ask everyone to present proof of vaccination or a negative COVID-19 test taken within 72 hours of arrival to the event at check in."  

Many people commented positively on the announcement; however, a few were wondering why there would not be testing for everyone regardless of vaccination status since vaccinated people can still contract and shed virus, (albeit those 'breakthrough' cases are statistically quite low according to most experts.) 

Comments: The Mid-South was arguably the last 'pre-COVID' ran gravel event, although it probably falls within the COVID era in reality. Some commenters were critical of that decision to run the event in mid-March of 2020. So, it stands to reason that the Mid-South organizers would be, perhaps, a bit more on the conservative side this time. 

As far as making everyone attending the Mid-South take a COVID test? I see the validity in that, but practically speaking, it would be difficult to enact such a measure. Besides, it would likely cause the event entry price to be raised significantly. On the other hand, it probably would be the fairest, most safe way to do a big event like Mid-South. 

But with sporting events, concerts, and colleges not doing anything- for the most part - does any of this end up mattering? That's not a question I have an answer for, but upon first glance, the whole "we're wide open vs we're testing/requiring proof" scene is baffling and it would seem that everyone is pretty much on their own in terms of taking risks. I'm not sure a proof of vaccination does anything to reduce risks other than to those who are vaccinated 'if' they contract the virus at Mid-South, or on the way to and back from there. Presumably you won't be welcome, and will not go, if you are a vaccine hold-out. Those unvaccinated people who live there? Pfft! I don't have an answer. 

That's a wrap for this Randomonium. Thanks for reading! 

Friday, September 17, 2021

Friday News And Views

 Ride With GPS Debuts New Technology:

This week Ride With GPS debuted a new "Surface Types" technology for route finding and planning that, in many ways, is the pinnacle of what many riders will want out of technology for route finding. 

What is most impressive, to my mind anyway, is that Ride With GPS thought this through and realized that the information necessary to make this work would largely need to be tweakable by the users themselves. This is because, as I have preached on for years, due to the fact that there is no currently available information which you can rely upon 100% for surface data. 

This is due to the fact that most all of the GPS road data to date is focused on where people will most likely be wanting information- namely paved highways and interstate highways. NOT on gravel and dirt roads, which, let's face it, only a very small percentage of people even care about. So, as a result I have found blockages of roads which occurred decades ago which are still listed as through-roads, or as having bridges, etc. That this misinformation on roads and surface types exists should be no surprise then. This is also why, when I have seen people touting 'route surface type resources' in the past who relied purely on data focused on and for pavement users, I cried foul. 

This new Surface Types feature on Ride With GPS will be similarly handcuffed- at first- But if users take the opportunity to edit and make suggestions, as Ride With GPS says they will be able to do, then all the other sector features, elevation data, and mileage splits for paved/unpaved bits will suddenly start to become what we've dreamed of having as a resource. A dream since the times of the earliest modern-day gravel grinder events. 

I have checked the routes I have saved (private) on Ride With GPS to see how it does. On some it is spot on. The gravel to pavement ratio is correct. But on some older routes it isn't picking up on the gravel that is really there in many spots. This is where the rider input will be critical. 

I believe Ride With GPS, due to its oft used integration with GPS navigation head units widely in use by cyclists and events now, will be successful where others were not. Time will tell....

The Search Continues:

Which brings me to GPS units for my uses. I've been doing a bunch of research, and THANK YOU to the readers here for your valuable suggestions, by the way. I really appreciate those and I have been informed greatly by what you have shared. 

So, where am I on all of this? Well, I have it slightly narrowed down to a Garmin 830, a Garmin 130, or the Karoo 2 from Hammerhead. Disparate choices, I know....

The Garmin 130 does more of what I want and less of what I do not want, but it is tiny, harder to see, (old eyes here!), and it doesn't have a color screen. Honestly, that all may not matter if prompts are audible during the turn by turn navigation. (I don't think that they are audible, but I cannot confirm this via the web so far) It also happens to be the least expensive option I am looking at as well. This makes buying the mounts it doesn't come with less of a pain. 

The 830 is bigger, has color screen display, and audible turn by turn navigation prompts. It also has alerts for help if I get into trouble, (something Mrs. Guitar Ted would like) and it has rerouting/back to start functions which would be kind of nice to have sometimes as well. It is more expensive though, and that is a concern. Along with it comes a slew of stuff I'll never use also. Maybe a 530 here?

Pretty much the same story with the Karoo 2 from Hammerhead. I like this one because it seems to be backed by a company that is trying to update the unit with newer features on a regular basis, (thus giving me more value for the money spent, potentially) and that perhaps bodes well for issues which Garmin and Wahoo seem to have which are not being addressed for their users. Should a Karoo 2 start 'locking up', I would hope that their aggressive plan to update their units in the field would address such an issue quickly. But again- it has lots of stuff I'll never use and it also is spendy to purchase. 

Still looking and researching.......

Mosaic Cycles Announces GT-X Series:

If you are a well heeled cyclist with a penchant for adventure cycling off-pavement then the new Mosaic Cycles GT-X series might be for you. Offered in a full custom, double butted titanium version or as a stock geometry, single wall version in titanium, the bikes are capable of being drop bar or flat bar, depending upon rider preference, due to the geometry having a longer front center than a standard drop bar bike would. 

Tire clearances are 29" X 2.25" or narrower, but keep in mind that the bottom bracket drop is 75mm, so a 650B set may not work, and Mosaic does not give any indication that it would either. However; while it does not give the 650B fans any love, this bike does go the non-sus corrected route, and I like that simplicity and aesthetic. 

But you'd better open the credit limits up. The base GT-2X is $4500.00 for the frame only, and a GT-1X frame and fork are nearly 7G!! Don't look at me to be one who will be getting one of these rigs. I don't make anywhere near the kind of income to be looking at such bikes!

Riding Gravel Radio Ranch Episode #91:

Keeping things local, Andy and I interviewed Dan Roberts of the Snaggy Ridge 105 gravel event recently. That event takes place October 2nd in Tipton, Iowa. 

I met Dan first at one of the Iowa Gravel Expos that N.Y. Roll and I put on a few years ago. He showed up to promote his event and has been to a couple of these since to do the same. It sounds like a great event and if you can get in, you should. I realize a LOT of stuff is going down in the Fall, but this event deserves your attention. 

Plus, RidingGravel.com is sponsoring it, and I am sending over some schwag to help support the event. So if you go you could score a few items and have a great day in the saddle to boot. Check it out!

Plus, you can listen to our podcast with Dan here. We had a lot of fun talking with him and playing our game called "Function or Fashion" as well. You can hear that podcast wherever you get your podcast feed from as also. Thanks!

This Wentworth tire comes in a 700 X 40 or 50mm and in 650B
American Classic Is Back! With Tires?!

 American Classic, the brand started by Bill Shook in 1982, was well known as a wheel and component company for years until slow sales in the business for them caused them to shutter the company in 2018. 

The assets of the company were offered for sale at that point along with all intellectual properties, but as of now no official industry news has been announced as to whether or not that sale has happened. Although this news article about the brand relaunch states that the sale did occur, but offers no clear details.

At any rate, now the brand appears to be back and with tires. Of course, they are selling gravel oriented tires and they offer quite a wide range from a mostly smooth treaded type to full-on, aggressive MTB-like tires. All offerings in their gravel range are available in 700c X 40mm, or 700c X 50mm widths along with 650B X 47mm sizes in black or tan wall sides. Prices are all the same, a paltry $35.00 per tire!

Comments: Wow! Tires? That pricing! Okay, here's the thing, with tire prices on the rise and many tires being out of stock, and with American Classic being a brand off the radar for a few years, this is probably an attention getting move - an introductory offer, if you will.  I am guessing the pricing, and stock of tires, will be gone rather quickly. Once the brand is established, (if it ever is as a tire brand), I suspect that you will see pricing increase dramatically. 

That 35 buck price - if the tires are decent - is basically at retail cost. I would be immensely surprised if they are making any money at that price, again- if the tires actually measure up to what the competition is offering. Normally gravel tires with high quality casings and rubber compounds are sold is at nearly double that 35 dollar price and even higher in some instances. I mean, you could be getting what you pay for here, which could be not-so-great.

As a brand relaunch, sticking to the gravel category, (with a small nod to the past with some road tires), and going with tires, (a BIG talking point on forums and websites), is a smart move. The buzz created by this launch is a good start. If the product is worthy, and if American Classic can sustain the force of this launch over the long haul, then they may have life for the long term. However; if the product turns out to be lackluster and their stock lists are depleted with no quick restocking? Ooof! It could be the greatest time to relaunch or the worst possible time to relaunch the brand. We will see....

But I have to give American Classic credit for this eye-opening relaunch. It is a pretty bold move. Also- they promise more components to come. Now we will see if it sticks.

And that's a wrap for this week! Have a fantastic weekend and thank you for reading G-Ted Productions!

Friday News And Views

 Ride With GPS Debuts New Technology:

This week Ride With GPS debuted a new "Surface Types" technology for route finding and planning that, in many ways, is the pinnacle of what many riders will want out of technology for route finding. 

What is most impressive, to my mind anyway, is that Ride With GPS thought this through and realized that the information necessary to make this work would largely need to be tweakable by the users themselves. This is because, as I have preached on for years, due to the fact that there is no currently available information which you can rely upon 100% for surface data. 

This is due to the fact that most all of the GPS road data to date is focused on where people will most likely be wanting information- namely paved highways and interstate highways. NOT on gravel and dirt roads, which, let's face it, only a very small percentage of people even care about. So, as a result I have found blockages of roads which occurred decades ago which are still listed as through-roads, or as having bridges, etc. That this misinformation on roads and surface types exists should be no surprise then. This is also why, when I have seen people touting 'route surface type resources' in the past who relied purely on data focused on and for pavement users, I cried foul. 

This new Surface Types feature on Ride With GPS will be similarly handcuffed- at first- But if users take the opportunity to edit and make suggestions, as Ride With GPS says they will be able to do, then all the other sector features, elevation data, and mileage splits for paved/unpaved bits will suddenly start to become what we've dreamed of having as a resource. A dream since the times of the earliest modern-day gravel grinder events. 

I have checked the routes I have saved (private) on Ride With GPS to see how it does. On some it is spot on. The gravel to pavement ratio is correct. But on some older routes it isn't picking up on the gravel that is really there in many spots. This is where the rider input will be critical. 

I believe Ride With GPS, due to its oft used integration with GPS navigation head units widely in use by cyclists and events now, will be successful where others were not. Time will tell....

The Search Continues:

Which brings me to GPS units for my uses. I've been doing a bunch of research, and THANK YOU to the readers here for your valuable suggestions, by the way. I really appreciate those and I have been informed greatly by what you have shared. 

So, where am I on all of this? Well, I have it slightly narrowed down to a Garmin 830, a Garmin 130, or the Karoo 2 from Hammerhead. Disparate choices, I know....

The Garmin 130 does more of what I want and less of what I do not want, but it is tiny, harder to see, (old eyes here!), and it doesn't have a color screen. Honestly, that all may not matter if prompts are audible during the turn by turn navigation. (I don't think that they are audible, but I cannot confirm this via the web so far) It also happens to be the least expensive option I am looking at as well. This makes buying the mounts it doesn't come with less of a pain. 

The 830 is bigger, has color screen display, and audible turn by turn navigation prompts. It also has alerts for help if I get into trouble, (something Mrs. Guitar Ted would like) and it has rerouting/back to start functions which would be kind of nice to have sometimes as well. It is more expensive though, and that is a concern. Along with it comes a slew of stuff I'll never use also. Maybe a 530 here?

Pretty much the same story with the Karoo 2 from Hammerhead. I like this one because it seems to be backed by a company that is trying to update the unit with newer features on a regular basis, (thus giving me more value for the money spent, potentially) and that perhaps bodes well for issues which Garmin and Wahoo seem to have which are not being addressed for their users. Should a Karoo 2 start 'locking up', I would hope that their aggressive plan to update their units in the field would address such an issue quickly. But again- it has lots of stuff I'll never use and it also is spendy to purchase. 

Still looking and researching.......

Mosaic Cycles Announces GT-X Series:

If you are a well heeled cyclist with a penchant for adventure cycling off-pavement then the new Mosaic Cycles GT-X series might be for you. Offered in a full custom, double butted titanium version or as a stock geometry, single wall version in titanium, the bikes are capable of being drop bar or flat bar, depending upon rider preference, due to the geometry having a longer front center than a standard drop bar bike would. 

Tire clearances are 29" X 2.25" or narrower, but keep in mind that the bottom bracket drop is 75mm, so a 650B set may not work, and Mosaic does not give any indication that it would either. However; while it does not give the 650B fans any love, this bike does go the non-sus corrected route, and I like that simplicity and aesthetic. 

But you'd better open the credit limits up. The base GT-2X is $4500.00 for the frame only, and a GT-1X frame and fork are nearly 7G!! Don't look at me to be one who will be getting one of these rigs. I don't make anywhere near the kind of income to be looking at such bikes!

Riding Gravel Radio Ranch Episode #91:

Keeping things local, Andy and I interviewed Dan Roberts of the Snaggy Ridge 105 gravel event recently. That event takes place October 2nd in Tipton, Iowa. 

I met Dan first at one of the Iowa Gravel Expos that N.Y. Roll and I put on a few years ago. He showed up to promote his event and has been to a couple of these since to do the same. It sounds like a great event and if you can get in, you should. I realize a LOT of stuff is going down in the Fall, but this event deserves your attention. 

Plus, RidingGravel.com is sponsoring it, and I am sending over some schwag to help support the event. So if you go you could score a few items and have a great day in the saddle to boot. Check it out!

Plus, you can listen to our podcast with Dan here. We had a lot of fun talking with him and playing our game called "Function or Fashion" as well. You can hear that podcast wherever you get your podcast feed from as also. Thanks!

This Wentworth tire comes in a 700 X 40 or 50mm and in 650B
American Classic Is Back! With Tires?!

 American Classic, the brand started by Bill Shook in 1982, was well known as a wheel and component company for years until slow sales in the business for them caused them to shutter the company in 2018. 

The assets of the company were offered for sale at that point along with all intellectual properties, but as of now no official industry news has been announced as to whether or not that sale has happened. Although this news article about the brand relaunch states that the sale did occur, but offers no clear details.

At any rate, now the brand appears to be back and with tires. Of course, they are selling gravel oriented tires and they offer quite a wide range from a mostly smooth treaded type to full-on, aggressive MTB-like tires. All offerings in their gravel range are available in 700c X 40mm, or 700c X 50mm widths along with 650B X 47mm sizes in black or tan wall sides. Prices are all the same, a paltry $35.00 per tire!

Comments: Wow! Tires? That pricing! Okay, here's the thing, with tire prices on the rise and many tires being out of stock, and with American Classic being a brand off the radar for a few years, this is probably an attention getting move - an introductory offer, if you will.  I am guessing the pricing, and stock of tires, will be gone rather quickly. Once the brand is established, (if it ever is as a tire brand), I suspect that you will see pricing increase dramatically. 

That 35 buck price - if the tires are decent - is basically at retail cost. I would be immensely surprised if they are making any money at that price, again- if the tires actually measure up to what the competition is offering. Normally gravel tires with high quality casings and rubber compounds are sold is at nearly double that 35 dollar price and even higher in some instances. I mean, you could be getting what you pay for here, which could be not-so-great.

As a brand relaunch, sticking to the gravel category, (with a small nod to the past with some road tires), and going with tires, (a BIG talking point on forums and websites), is a smart move. The buzz created by this launch is a good start. If the product is worthy, and if American Classic can sustain the force of this launch over the long haul, then they may have life for the long term. However; if the product turns out to be lackluster and their stock lists are depleted with no quick restocking? Ooof! It could be the greatest time to relaunch or the worst possible time to relaunch the brand. We will see....

But I have to give American Classic credit for this eye-opening relaunch. It is a pretty bold move. Also- they promise more components to come. Now we will see if it sticks.

And that's a wrap for this week! Have a fantastic weekend and thank you for reading G-Ted Productions!

Thursday, September 16, 2021

Preparations For A 'Long Ride'

This Craft Cadence Handlebar Bag is going to be a part of the set up.
 I have plans and I am acting upon them of late. This is going to be a 'big ride', and no- I am not saying what it is until it happens. So don't ask me. Just know that I've been working on this for a while now and the time is coming that I have a window to do this in. 

So, the bike is going to be the Noble Bikes GX-5, (Standard Disclaimer) and I have just about gotten things where I need them to be to use this bike on this particular ride. The biggest issue is water, and now with this new Craft Cadence Handlebar bag I have here on test for RidingGravel.com (see the link above), I now have the capacity to have enough water for this attempt. 

This bag on the handle bar can hold two large sized water bottles and more. I plan on using it to increase the capacity on the bike to five bottles total. This is important for this attempt because there is one long stretch on this route that has 54 miles with no services. I need to insure that I have enough water to span that distance, and I believe five bottles is enough. 

Here is the bike as it will be for this 'long ride' from the side

The bag has more capacity to hold stuff, so I believe I am going to be putting nutritional items in there like drink mix packets and maybe some convenience store fare for that longer sector. The other bags will be used for tools, tubes, extra clothing, and the top tube bag will be for quick eats on the ride. 

Sharp eyed readers will note the lights and yes- this is going to start in the dark. I may have a helmet light to spot signs with, but I believe my cues for the route should suffice. It is not a race anyway, so time can be spent where I need to spend it. Anyway, if things go as planned, I'll be done before Sunset. So, these lights are really all I should need. 

There are a couple of other items yet to come here, and I have to devise a smaller cue sheet holder, but things are coming together for this ride and soon I hope I can share what I am doing with you all here. 

Stay tuned.....

Preparations For A 'Long Ride'

This Craft Cadence Handlebar Bag is going to be a part of the set up.
 I have plans and I am acting upon them of late. This is going to be a 'big ride', and no- I am not saying what it is until it happens. So don't ask me. Just know that I've been working on this for a while now and the time is coming that I have a window to do this in. 

So, the bike is going to be the Noble Bikes GX-5, (Standard Disclaimer) and I have just about gotten things where I need them to be to use this bike on this particular ride. The biggest issue is water, and now with this new Craft Cadence Handlebar bag I have here on test for RidingGravel.com (see the link above), I now have the capacity to have enough water for this attempt. 

This bag on the handle bar can hold two large sized water bottles and more. I plan on using it to increase the capacity on the bike to five bottles total. This is important for this attempt because there is one long stretch on this route that has 54 miles with no services. I need to insure that I have enough water to span that distance, and I believe five bottles is enough. 

Here is the bike as it will be for this 'long ride' from the side

The bag has more capacity to hold stuff, so I believe I am going to be putting nutritional items in there like drink mix packets and maybe some convenience store fare for that longer sector. The other bags will be used for tools, tubes, extra clothing, and the top tube bag will be for quick eats on the ride. 

Sharp eyed readers will note the lights and yes- this is going to start in the dark. I may have a helmet light to spot signs with, but I believe my cues for the route should suffice. It is not a race anyway, so time can be spent where I need to spend it. Anyway, if things go as planned, I'll be done before Sunset. So, these lights are really all I should need. 

There are a couple of other items yet to come here, and I have to devise a smaller cue sheet holder, but things are coming together for this ride and soon I hope I can share what I am doing with you all here. 

Stay tuned.....

Wednesday, September 15, 2021

Townie Refurb

My Mid-80's Schwinn High Sierra townie.
 The longer term readers here will maybe remember this bike. It's literally been years since I've posted anything about this bike though, so if you are not familiar with this, let me introduce you to my townie. It is a 1986 Schwinn High Sierra mountain bike. 

This bike came to me not long after I'd gotten back into the bicycle business again in 2002. I'd guess it was probably around 2003 or so when I still was working some night shifts at the shop. One particular evening, a gentleman came in and asked if we could dispose of a couple of old bikes he did not want anymore. My boss affirmed him that we could do this. The man then wheeled the first bike in, and it was this bike I am showing today, only it did not look like this then! 

It had about three coats of spray-bomb paint jobs on it back then but otherwise it was a straight, as sold component-wise bike. The tires were flat and the cables were a mess. My boss looked at it and suggested that I take it home if I wanted as it looked like it would fit me. So, I did that, and I got to stripping it down to the bare frame. Then I scraped off most of the paint with a paint scraper and sent it to a local business that did powder coating via a mutual cyclist and then customer of the shop. He was told by me to just use whatever was in the machine for the day, and so I got this 'army green', matte finish which I happened to like a lot. 

Anyway, I set it up 1 X 5, (way ahead of anything being 1X), and started off by putting an old rack on it so I could use my ancient Jandd Mountaineering panniers. The very same panniers I used for both of my self-supported tours which I have documented here. I ended up using the original wheels off the old Mongoose 26"er touring bike from those days which are nutted axle, high flanged, and the rims have cut-outs, much like a fat bike rim would have. (That was a 'thing' on early BMX bikes, and Mongoose being from BMX did this on their early MTB's) 

Looking livelier than it had been when it was an ashen grey color!
The saddle I got in a trade, but I cannot recall how or for what. It's been years ago now! Anyway, the old Brooks Pro seemed comfy enough, so it stayed on this bike. Then I put it to use as my errand bike. It was always in the garage, ready to go get milk, diapers, butter, or beers. Then life changed and the garage roof started leaking and the next thing ya know I have a nearly destroyed Brooks Pro and a big mess to clean up in regards to the bike. 

The ol' Brooks took a hit, but a liberal application of Proofide has seemed to liven it up again. I may have to apply a bit more here and there, but I think it is going to survive. Anyway, this ol' Schwinn is pretty much bullet proof, but for a small issue with the roller cam brake in the front. I think the brake bosses need to be reamed true and round again. There was a tool back in ancient bike times that was made to do this job, but as you probably know, roller cam brakes are pretty much rare antiquities and tools to work on them are rarer yet. So, I just get by with a bit of a funky front brake for now. 

The bike rides really well. It is heavy, but it is nimble! I recall reading somewhere that Charlie Kelly, the Marin mountain biking pioneer, said that if you wanted to know what a first generation, purpose-built mountain bike rode like from the late 70's, well then just buy any Schwinn MTB made up until the late 80's as they pretty much mirror the same geometry and steel tubing sizes. If that is true, then those bikes must be a hoot to ride. It is a totally different vibe than MTB is now. Laid back, touring, ripping corners, hopping up and over stuff, and generally just crawling along anywhere, this old Schwinn seems to not be bothered with much of anything I throw at it. I suppose that with a knobby set of tires swapped in for the Continental Winter Contacts, it would become quite a fun trail bike. But that ain't a gonna happen 'round here! Nope! Maybe I'd do a gravel ride or tour with it if I swapped out the drive train to a triple 3 X 7. 

But enough of that. It's a townie now, and that is good.

Townie Refurb

My Mid-80's Schwinn High Sierra townie.
 The longer term readers here will maybe remember this bike. It's literally been years since I've posted anything about this bike though, so if you are not familiar with this, let me introduce you to my townie. It is a 1986 Schwinn High Sierra mountain bike. 

This bike came to me not long after I'd gotten back into the bicycle business again in 2002. I'd guess it was probably around 2003 or so when I still was working some night shifts at the shop. One particular evening, a gentleman came in and asked if we could dispose of a couple of old bikes he did not want anymore. My boss affirmed him that we could do this. The man then wheeled the first bike in, and it was this bike I am showing today, only it did not look like this then! 

It had about three coats of spray-bomb paint jobs on it back then but otherwise it was a straight, as sold component-wise bike. The tires were flat and the cables were a mess. My boss looked at it and suggested that I take it home if I wanted as it looked like it would fit me. So, I did that, and I got to stripping it down to the bare frame. Then I scraped off most of the paint with a paint scraper and sent it to a local business that did powder coating via a mutual cyclist and then customer of the shop. He was told by me to just use whatever was in the machine for the day, and so I got this 'army green', matte finish which I happened to like a lot. 

Anyway, I set it up 1 X 5, (way ahead of anything being 1X), and started off by putting an old rack on it so I could use my ancient Jandd Mountaineering panniers. The very same panniers I used for both of my self-supported tours which I have documented here. I ended up using the original wheels off the old Mongoose 26"er touring bike from those days which are nutted axle, high flanged, and the rims have cut-outs, much like a fat bike rim would have. (That was a 'thing' on early BMX bikes, and Mongoose being from BMX did this on their early MTB's) 

Looking livelier than it had been when it was an ashen grey color!
The saddle I got in a trade, but I cannot recall how or for what. It's been years ago now! Anyway, the old Brooks Pro seemed comfy enough, so it stayed on this bike. Then I put it to use as my errand bike. It was always in the garage, ready to go get milk, diapers, butter, or beers. Then life changed and the garage roof started leaking and the next thing ya know I have a nearly destroyed Brooks Pro and a big mess to clean up in regards to the bike. 

The ol' Brooks took a hit, but a liberal application of Proofide has seemed to liven it up again. I may have to apply a bit more here and there, but I think it is going to survive. Anyway, this ol' Schwinn is pretty much bullet proof, but for a small issue with the roller cam brake in the front. I think the brake bosses need to be reamed true and round again. There was a tool back in ancient bike times that was made to do this job, but as you probably know, roller cam brakes are pretty much rare antiquities and tools to work on them are rarer yet. So, I just get by with a bit of a funky front brake for now. 

The bike rides really well. It is heavy, but it is nimble! I recall reading somewhere that Charlie Kelly, the Marin mountain biking pioneer, said that if you wanted to know what a first generation, purpose-built mountain bike rode like from the late 70's, well then just buy any Schwinn MTB made up until the late 80's as they pretty much mirror the same geometry and steel tubing sizes. If that is true, then those bikes must be a hoot to ride. It is a totally different vibe than MTB is now. Laid back, touring, ripping corners, hopping up and over stuff, and generally just crawling along anywhere, this old Schwinn seems to not be bothered with much of anything I throw at it. I suppose that with a knobby set of tires swapped in for the Continental Winter Contacts, it would become quite a fun trail bike. But that ain't a gonna happen 'round here! Nope! Maybe I'd do a gravel ride or tour with it if I swapped out the drive train to a triple 3 X 7. 

But enough of that. It's a townie now, and that is good.

Tuesday, September 14, 2021

Project Wide Gravel Wheels v2: A Tire Swap & Impressions

 The last time I posted on the Project Wide Gravel Wheels v2 (PWGWv2) I mentioned that I wasn't all that impressed by the results I saw with a 700 X 42mm Resolute mounted up on the 30.5mm internal width Spank rims. I then made mention of possibly trying some wider tires, but not too wide, because if the tire I tried got much above 50mm in width, it wouldn't fit a gravel bike in my stable. The Black Mountain Cycles MCD actually being the only gravel bike that I own which I could even consider trying this idea. 

So, over the weekend I grabbed a set of Cannonball tires which I had tested for Riding Gravel and which are listed as 700 X 47mm in width. (Standard Disclaimer) I popped those onto the Spank rims easily with my newly resuscitated Topeak Joe Blow floor pump. The results were compared directly to the 700 X 47mm Rutland tires which I have mounted to some Spinergy GX wheels which have a 24mm internal rim width. The Cannonballs looked bigger and wider. Not by a little bit either.  

I measured the Cannonball tires on 24mm internal width rims during the Riding Gravel test and at that time they barely crossed the 49mm wide barrier. On the Spank rims? I measured these Cannonball tires out at 50.17mm in width. Whoa! Would they fit the Black Mountain Cycles MCD? I slapped on the rear tire first, because I knew that would be the deciding factor. 

It fit!

For dry use only! There isn't much clearance here!

So, now what? Well, an important factor which I detailed out in the last update on the PWGWv2, (go back to see that via the very first hyperlink in this post), was how a tire's profile can be altered by internal rim width. Too skinny or too wide is too much. How did the Cannonball look? On a 24mm internal width rim, the 700 X 47mm Cannonball was quite rounded. I felt that this was to the tire's detriment on looser surfaces. Now with the Cannonball tires on the 30.5mm internal rim width Spank rims, the profile of the tire is predictably flatter, since as the bead of each side of a tire casing gets further apart, the crown of the profile of the tire flattens out. This occurred beautifully on the Cannonball and I think it is an improvement in this instance. 

From Sunday's ride.

So, what about that Rutland in 47mm width? How do I think that would do? This tire tends to be a flatter crowned tire than the Cannonball, so my guess is that a 30.5mm internal rim width would be too much for that tire. It will flatten the crown profile even further, and that would only take away speed and to some extent, handling. 

My take away here is that the PWGWv2 is 'good' in very limited circumstances. It depends upon the tire used, and those tires have to be wider than 45mm. Also, I do not have the proper bicycle to explore the options that would, perhaps, make even more sense than the Cannonball tires do. I would need a bicycle rated for 29"er X 2.4" tires, minimum, to get everything out of these wheels that is there. At that point, these are not really "wide gravel wheels" anymore, so my conclusion from the last update holds true. 700c rims for gravel bikes probably should be in the 24mm-26mm range for internal rim widths so that they will work on gravel bikes using 700 X 38mm-45mm tires. Wider internal rim widths start to degrade a gravel tire's performance, especially on the lower end of the tire width spectrum, and on the wider end, tires may not fit frames anymore. 

Going forward, I plan on ride testing the PWGWv2 with these Cannonball tires and reporting back with a final word and plans for this wheel set's future. 

Project Wide Gravel Wheels v2: A Tire Swap & Impressions

 The last time I posted on the Project Wide Gravel Wheels v2 (PWGWv2) I mentioned that I wasn't all that impressed by the results I saw with a 700 X 42mm Resolute mounted up on the 30.5mm internal width Spank rims. I then made mention of possibly trying some wider tires, but not too wide, because if the tire I tried got much above 50mm in width, it wouldn't fit a gravel bike in my stable. The Black Mountain Cycles MCD actually being the only gravel bike that I own which I could even consider trying this idea. 

So, over the weekend I grabbed a set of Cannonball tires which I had tested for Riding Gravel and which are listed as 700 X 47mm in width. (Standard Disclaimer) I popped those onto the Spank rims easily with my newly resuscitated Topeak Joe Blow floor pump. The results were compared directly to the 700 X 47mm Rutland tires which I have mounted to some Spinergy GX wheels which have a 24mm internal rim width. The Cannonballs looked bigger and wider. Not by a little bit either.  

I measured the Cannonball tires on 24mm internal width rims during the Riding Gravel test and at that time they barely crossed the 49mm wide barrier. On the Spank rims? I measured these Cannonball tires out at 50.17mm in width. Whoa! Would they fit the Black Mountain Cycles MCD? I slapped on the rear tire first, because I knew that would be the deciding factor. 

It fit!

For dry use only! There isn't much clearance here!

So, now what? Well, an important factor which I detailed out in the last update on the PWGWv2, (go back to see that via the very first hyperlink in this post), was how a tire's profile can be altered by internal rim width. Too skinny or too wide is too much. How did the Cannonball look? On a 24mm internal width rim, the 700 X 47mm Cannonball was quite rounded. I felt that this was to the tire's detriment on looser surfaces. Now with the Cannonball tires on the 30.5mm internal rim width Spank rims, the profile of the tire is predictably flatter, since as the bead of each side of a tire casing gets further apart, the crown of the profile of the tire flattens out. This occurred beautifully on the Cannonball and I think it is an improvement in this instance. 

From Sunday's ride.

So, what about that Rutland in 47mm width? How do I think that would do? This tire tends to be a flatter crowned tire than the Cannonball, so my guess is that a 30.5mm internal rim width would be too much for that tire. It will flatten the crown profile even further, and that would only take away speed and to some extent, handling. 

My take away here is that the PWGWv2 is 'good' in very limited circumstances. It depends upon the tire used, and those tires have to be wider than 45mm. Also, I do not have the proper bicycle to explore the options that would, perhaps, make even more sense than the Cannonball tires do. I would need a bicycle rated for 29"er X 2.4" tires, minimum, to get everything out of these wheels that is there. At that point, these are not really "wide gravel wheels" anymore, so my conclusion from the last update holds true. 700c rims for gravel bikes probably should be in the 24mm-26mm range for internal rim widths so that they will work on gravel bikes using 700 X 38mm-45mm tires. Wider internal rim widths start to degrade a gravel tire's performance, especially on the lower end of the tire width spectrum, and on the wider end, tires may not fit frames anymore. 

Going forward, I plan on ride testing the PWGWv2 with these Cannonball tires and reporting back with a final word and plans for this wheel set's future.