Tuesday, September 07, 2021

Country Views: Thankful

Escape Route: Burton Avenue
 The days leading up to the Labor Day holiday weekend were pretty wet, dull, and somber. At least around here it was. We had heavy rains for mid-week and then Friday was supposed to be great outside. Except it wasn't. It drizzled and was grey all day long. Saturday started out the same way up until early afternoon when the Sun finally came back and brightened my day. 

Actually, I had planned on getting up early Saturday to ride but it was a full-on rain in the morning! So, I waited until later in the day and just did an urban alley cruise. Sunday it was supposed to get cooler and drier, so I figured a nice country ride was in order. 

I was treated to a fine morning, so I grabbed the Twin Six Standard Rando v2, aka "The Gravel Bus", and headed into what little wind there was, which on Sunday meant I went North. North up Burton Avenue to the county line. That's mostly uphill, so on a single speed it can be a bit rough if the wind is strong. The temperatures were perfect. Upper 60's to low 70's, low humidity, and not a cloud in the sky to begin with. 

What a great day it was to be out in the country!

The recent moisture made the gravel sink into the road bed under car/truck traffic making for smooth roads.

I was also treated to 'hero gravel' conditions. Those recent heavy rains and moist days following made car and trucks press the gravel into the road bed, smoothing the surface to a pavement-like consistency. Sure, there were a few chunkier sections on the ride. Probably where cars and trucks were few over those days, but for the most part, the route I used was super-smoothed over. 

Church services were in session at St. Pauls's when I went by Sunday morning.


There was a lot of 'grass farming' activities going on out there!

It was so beautiful out Sunday, and with seeing Sunday church services going on at both working rural churches I passed by, getting waves from people, and with the great roads, I was so thankful I was able to ride. It reminded me of a song:

"I'm thankful for my country home, 

It gives me peace of mind.

Somewhere I can walk alone,

And leave myself behind."

From "Country Home" by Neil Young. 


 
East Janesville Church: Better get up and see this soon. I don't know how much longer this will stand.

I decided to turn East at East Janesville Church which is on the county line road. That church hasn't been occupied in years, and I doubt it is going to last much longer as it seems to be decaying now with no one to look after it. I wish some organization like the Cedar Falls Historical Society could get their mitts on this place and restore it. A church from the late 1800's is a rarity and I am sure this was an important part of county and area history at one point. Anyway....

A pale horse and Goldenrod in the ditch along Marquise Road

Another example of the incredibly smooth roads due to recent rainfall.

Once I got headed East I suddenly became aware that I had a fair amount of tailwind. Hmm....I thought the wind was out of the Northwest today. Guess it was mostly out of the West in reality, because I was definitely feeling it going East! 

Church was also in service at Mt. Hope United Methodist Church when I rode by.

I was thinking about a route I would take someone on new to the area if I had the chance and so I darted down a mile on Moline Road and then East on Gresham to go by the German cemetery on the South side of the road. Then South on Sage Road to catch the Bennington School House and the rural church a mile south of there. 

And besides, I needed to keep the time in mind as I was planning on being home in time for lunch! So, as it was after 11:00am by the time I was headed South, I had to keep the pedals going around. I only stopped once, briefly for a nature break, and then I was back on it all the way to the house. 

Airline Highway looking West.

I was super-thankful for the day and to be able to ride out there. The winds were nothing to worry about and the roads were great. Everybody I met in a car or truck waved back. It just couldn't get a whole lot better than it was on Sunday.

Monday, September 06, 2021

Happy Labor Day! (And Bonus Post)

Petrie Road's level B Section, taken Wednesday of last week.
 HAPPY LABOR DAY! 

Today is the last major U.S. holiday until Thanksgiving, at the end of November. It is a day that marks the traditional "end of Summer' here. So, to my fellow American's- I hope that you all are having a safe, happy, and memorable Labor Day 2021. 

For those of you from outside of the U.S. that read this blog, here is what this is all about here:

"Labor Day pays tribute to the contributions and achievements of American workers and is traditionally observed on the first Monday in September. It was created by the labor movement in the late 19th century and became a federal holiday in 1894." - from Wikipedia.

And now, a bonus post! Which, by the way- This is the 6,000th post I've done here on G-Ted Productions.

 What's Happening With The Bicycle Supply Chain

 

This past week the Eurobike show took place in Germany where the chatter was all about supply chain disruptions. This is a really important subject with Europeans because of the electrified bicycle market, which is about 50 times that of anything going on here in America, if the stories are to be believed. 

Demand spiked during the pandemic and - as in North America - supply was depleted. Now with COVID still disrupting ports and factories, and with the craziness in container shipping, parts and bicycles are on long lead times. REALLY long lead times. This was hoped to have worked itself out by the end of this year, but as this Summer went along, the problem did not get any better, it actually has gotten worse. 

Many people want to know why we do not have bikes and parts. There is no singular reason. This is a multi-faceted, multi-national issue. Since it is so complex, estimates of a quick turn around to "normalcy" should never have been made. In fact, now CEO's of the bigger companies are not even hazarding a guess as to when this will rectify itself back to something recognizable as what the economy looked like pre-pandemic. I now offer the following reasons why this problem persists...

  • COVID Issues: Factories tied to bicycle production continue to be disrupted by cut-backs and closures/lock downs.  Earlier in the Summer it was Shimano's Malaysian component works which had to be shut down for a little over a month. Now we are hearing factories in Vietnam are being affected, (many brands have frames made there). Ports have been shut down for periods of time during the Summer blocking the exports of products out of China as well due to COVID. As the Delta variant rages worldwide, this issue is still a possible deterrent to getting things back on track.
  • Shipping Container Prices: See that Maersk container ship in today's post? It is laden with thousands of 40ft containers. The biggest container ships can haul up to 20,000 - 24,000 in one trip. Pre-pandemic the cost per container was hovering around $1,500.00 to get from China to Europe or North America. Now with world-wide demand going bananas for everything, container shipping prices have ballooned to $20,000/40Ft container and higher.(Some reports now saying that costs are topping $25,000- $30,000/40ft container)  It has gotten to the point where ships coming from China leave their cargo in North American ports, and instead of coming back with exports, they go back with a load of empty containers instead. It is more profitable for them to do that and get back to North America or Europe with another full load of containers from the Far East due to the insane costs to ship containers now. 
  • Other Shipping Disruptions: Long lines to get stuff out of the Far East has caused some companies to pay premium prices to essentially cut in line ahead of others waiting to get goods out of port. Whether or not certain bicycle brands are doing this, or being affected by this, is uncertain. But, shipping companies are only far too eager to oblige companies that wave the cash in front of them. Then, once things get here, there are literal parking lots of container ships at anchorage waiting to get into harbor to unladen their cargo ships and return to the Far East. (Currently Los Angeles harbor has a record number of ships parked at anchorage waiting to unload at 44 ships) This waiting can take days and usually weeks. Once the port unloads these containers you have to take them by truck, and sometimes by train, to wherever they are to be distributed. However; wild fires shut down one of the major North-South train routes for several weeks, and as far as trucking goes, there is a shortage of labor to drive the rigs, further backing up the loads at port. 
  • Raw Materials, Parts, and Pieces Shortages: To make things worse, now with all the disruptions due to COVID, hurricane Ida, and shipping, the parts, pieces, and raw materials needed to make things are becoming harder to get. Things like steel, aluminum, and rubber - things absolutely vital to the bicycle industry - these things are in very short supply. Try finding gravel tires, or 11 speed chains, or hitch mounted bicycle racks. You get the idea here.

It's so bad now that a trade paper quoted Claus Fleischer, the CEO of Bosch e-bike systems, as saying, "I can't promise anything for the next 12 to 18 months." Do the math folks. He said this at the end of August, 2021. That means you are probably not going to see the end of disruptions until August 2022 - late Winter 2023! 

So, the state of things is such as it is due to various world-wide influences and it will take a year to a year and a half from now to get over it. Maybe. Who knows?! 

And when things do come back? Another industry person was quoted as saying, "(The market) will show some decline as a result", but that there will be price increases due to demand and shipping costs. Basically, your dollar will buy less than it could pre-pandemic. That goes for parts and pieces as well. 

So, my advice is this- Keep what you have in excellent working order. Don't bank on getting a new, shiny rig in the next two years, and be patient! Especially when trying to source parts. Be flexible- Those favorite tires? You may have to settle for something available- whatever that may be. Same with chains, cassettes, and more. Get acquainted with the used market. Lots of people bought bikes in 2020 and many are now bailing on them. (So much for the so-called "Bike Boom") Parts are also being offered up from builds that weren't completed during the pandemic. Check out Facebook Marketplace, various Facebook bicycle sales pages, and Craigslist. I've seen tons of stuff up for sale that you cannot find at shops or online. 

And just ride. Getting away from all the nonsense - even this blog - is probably a good thing. Unplug. get out there and enjoy a good bicycle ride.

Happy Labor Day! (And Bonus Post)

Petrie Road's level B Section, taken Wednesday of last week.
 HAPPY LABOR DAY! 

Today is the last major U.S. holiday until Thanksgiving, at the end of November. It is a day that marks the traditional "end of Summer' here. So, to my fellow American's- I hope that you all are having a safe, happy, and memorable Labor Day 2021. 

For those of you from outside of the U.S. that read this blog, here is what this is all about here:

"Labor Day pays tribute to the contributions and achievements of American workers and is traditionally observed on the first Monday in September. It was created by the labor movement in the late 19th century and became a federal holiday in 1894." - from Wikipedia.

And now, a bonus post! Which, by the way- This is the 6,000th post I've done here on G-Ted Productions.

Sunday, September 05, 2021

Trans Iowa Stories: A Look At The Landscape In 2016 - Part 1

From the Geezer Ride in 2016- This ended up on T.I.v14's course.

  "Trans Iowa Stories" is an every Sunday post which helps tell the stories behind the event. You can check out other posts about this subject  by clicking on the "Trans Iowa Stories" link under the blog header. Thanks and enjoy! 

I've been treated to some great Trans Iowa stories and memories from riders recently. I am collecting these to - hopefully - put into a book at the end of this series. If you were a Trans Iowa rider and have any memories that you'd like to share, please do and send those to g.ted.productions@gmail.com. Maybe your tale will also end up in the Trans Iowa Book Of Tales!

Post T.I.v12 was a blur. I kept the pedal to the metal all throughout the Summer and into Fall. On one particular family trip that Summer, I found myself waiting for a table at a restaurant outside of the seating area in an antique mall where there were a lot of antiques for sale. Not far above my head was an old tin sign for a Southwestern tourist trap motel, or something similar. I cannot recall, but the design was that of stylized, outstretched wings and it reminded me a lot of the T.I.v10 logo. I had inspiration. At that moment, I was quite sure I would put on Trans Iowa v13, all due to a design idea for the site's header art!  

Of course, I already knew somewhat that I was going forward at least one more year. But in reality, there were a lot of reasons to quit. Trans Iowa v12 was a stellar event on almost every forward facing front, my struggles behind the curtains, so to speak, notwithstanding. The event would have made for a great 'high point' to walk away from it all. You are never guaranteed how your exit from anything is going to look, except in rare cases, so taking a chance on another event was tough for sure. 

Not only was another Trans Iowa risky in terms of exit strategies, I also had a ton of fear in terms of what the odds were for a bad injury, or even a death to a participant were by this time. I had maybe emptied my good luck account? I don't know, but after that racer separated his shoulder in the early part of T.I.v12, my concerns were deepened and the longer I went on with this event, I figured there were higher probabilities for something bad to happen. I already knew I had dodged a lot of bullets already. 

Draft artwork for the T.I.v13 header.
Of course, you might think, the answer to all of that is to just get a good lawyer and good insurance. But the reality of the matter is all of that makes zero difference to your heart in the middle of the night as you lay awake wondering when the other foot may fall and you have to deal with a tragedy, or a bad injury to a rider. Insurance and lawyers may help you out, but your conscience? Yeah, you have to bear that on your own. When you 'care' it is a heavy burden to bear that spending money on insurance doesn't assuage. 

It's ironic as well that at about this time my correspondence with WTB's Will Ritchie was filled with his mentioning of how impressed he was that I cared for the riders and the event. It was a palpable sensation for him, and obviously, he was impressed enough to mention it several times. Now as for me, I never realized that I cared so much and so deeply. I was - you know - just doing my job, as it were. Anything less wasn't adequate. But I never had given it a thought as to what that looked like on the outside. And what is more, I realized Will was right. It was that energy, that caring, that was draining me and causing me to wear out. 

While that was foremost of the burdens I bore, there were some other things that were bearing down on myself and Trans Iowa. Technology and social media being the two biggest obstacles to keeping Trans Iowa the way I felt it needed to be. The world was more interconnected than ever and it was nigh unto impossible to escape it by 2016. Thinking back ten years prior, there were huge pockets of Iowa without cell phone coverage. There were no smart phones, no GPS bicycle computers worth a hoot, and social media was in its infancy. One could be disconnected and have a certain experience with - really - no other choice during Trans Iowa. In 2016? Heck, you could have been chatting on Facebook with a coach for the entire event if that's what you wanted to do. Granted, most riders did not want that, but there was that temptation to post an image, see the responses, and we all know and have read those posts thanking those that 'were with me there during my darkest hours during the event'. 

All that, in my opinion, was anti-Trans Iowa in spirit and in practice. But could it be stopped? No- it could not. The world had changed, and there was no going back, it would seem. And that made me think I was wasting my time with putting on Trans Iowa the way I was trying to do it. It was hard to not get down about that. Many still thought, and probably still do, that Trans Iowa in the latter years was that awesome challenge that it always had been. As much as I could steer that ship that way, yes- Yes it was. But the steering wheel was being ripped from my hands, to my way of thinking, and each passing year became more of a trial than the previous one when it came to steering that ship. 

 I get it though. I am an odd-ball. A weirdo that does things a different way. Many people still don't understand why I did what I did with Trans Iowa. My inspiration comes from a very different place than most folks does, which may explain some of it. My mother always told me that "You march to the beat of a different drummer." Because of how I am wired, it made Trans Iowa an odd duck in the gravel scene. By 2016, it was an enigma few people knew about or could wrap their heads around. I was okay with that. While that could have brought me further down, I had an excuse to keep going. That sign in the antique mall was one. I also had a couple of goals in mind to tackle which invigorated me. It was enough to overcome the negatives.......this time. 

Next: Part 2

Trans Iowa Stories: A Look At The Landscape In 2016 - Part 1

From the Geezer Ride in 2016- This ended up on T.I.v14's course.

  "Trans Iowa Stories" is an every Sunday post which helps tell the stories behind the event. You can check out other posts about this subject  by clicking on the "Trans Iowa Stories" link under the blog header. Thanks and enjoy! 

I've been treated to some great Trans Iowa stories and memories from riders recently. I am collecting these to - hopefully - put into a book at the end of this series. If you were a Trans Iowa rider and have any memories that you'd like to share, please do and send those to g.ted.productions@gmail.com. Maybe your tale will also end up in the Trans Iowa Book Of Tales!

Post T.I.v12 was a blur. I kept the pedal to the metal all throughout the Summer and into Fall. On one particular family trip that Summer, I found myself waiting for a table at a restaurant outside of the seating area in an antique mall where there were a lot of antiques for sale. Not far above my head was an old tin sign for a Southwestern tourist trap motel, or something similar. I cannot recall, but the design was that of stylized, outstretched wings and it reminded me a lot of the T.I.v10 logo. I had inspiration. At that moment, I was quite sure I would put on Trans Iowa v13, all due to a design idea for the site's header art!  

Of course, I already knew somewhat that I was going forward at least one more year. But in reality, there were a lot of reasons to quit. Trans Iowa v12 was a stellar event on almost every forward facing front, my struggles behind the curtains, so to speak, notwithstanding. The event would have made for a great 'high point' to walk away from it all. You are never guaranteed how your exit from anything is going to look, except in rare cases, so taking a chance on another event was tough for sure. 

Not only was another Trans Iowa risky in terms of exit strategies, I also had a ton of fear in terms of what the odds were for a bad injury, or even a death to a participant were by this time. I had maybe emptied my good luck account? I don't know, but after that racer separated his shoulder in the early part of T.I.v12, my concerns were deepened and the longer I went on with this event, I figured there were higher probabilities for something bad to happen. I already knew I had dodged a lot of bullets already. 

Draft artwork for the T.I.v13 header.
Of course, you might think, the answer to all of that is to just get a good lawyer and good insurance. But the reality of the matter is all of that makes zero difference to your heart in the middle of the night as you lay awake wondering when the other foot may fall and you have to deal with a tragedy, or a bad injury to a rider. Insurance and lawyers may help you out, but your conscience? Yeah, you have to bear that on your own. When you 'care' it is a heavy burden to bear that spending money on insurance doesn't assuage. 

It's ironic as well that at about this time my correspondence with WTB's Will Ritchie was filled with his mentioning of how impressed he was that I cared for the riders and the event. It was a palpable sensation for him, and obviously, he was impressed enough to mention it several times. Now as for me, I never realized that I cared so much and so deeply. I was - you know - just doing my job, as it were. Anything less wasn't adequate. But I never had given it a thought as to what that looked like on the outside. And what is more, I realized Will was right. It was that energy, that caring, that was draining me and causing me to wear out. 

While that was foremost of the burdens I bore, there were some other things that were bearing down on myself and Trans Iowa. Technology and social media being the two biggest obstacles to keeping Trans Iowa the way I felt it needed to be. The world was more interconnected than ever and it was nigh unto impossible to escape it by 2016. Thinking back ten years prior, there were huge pockets of Iowa without cell phone coverage. There were no smart phones, no GPS bicycle computers worth a hoot, and social media was in its infancy. One could be disconnected and have a certain experience with - really - no other choice during Trans Iowa. In 2016? Heck, you could have been chatting on Facebook with a coach for the entire event if that's what you wanted to do. Granted, most riders did not want that, but there was that temptation to post an image, see the responses, and we all know and have read those posts thanking those that 'were with me there during my darkest hours during the event'. 

All that, in my opinion, was anti-Trans Iowa in spirit and in practice. But could it be stopped? No- it could not. The world had changed, and there was no going back, it would seem. And that made me think I was wasting my time with putting on Trans Iowa the way I was trying to do it. It was hard to not get down about that. Many still thought, and probably still do, that Trans Iowa in the latter years was that awesome challenge that it always had been. As much as I could steer that ship that way, yes- Yes it was. But the steering wheel was being ripped from my hands, to my way of thinking, and each passing year became more of a trial than the previous one when it came to steering that ship. 

 I get it though. I am an odd-ball. A weirdo that does things a different way. Many people still don't understand why I did what I did with Trans Iowa. My inspiration comes from a very different place than most folks does, which may explain some of it. My mother always told me that "You march to the beat of a different drummer." Because of how I am wired, it made Trans Iowa an odd duck in the gravel scene. By 2016, it was an enigma few people knew about or could wrap their heads around. I was okay with that. While that could have brought me further down, I had an excuse to keep going. That sign in the antique mall was one. I also had a couple of goals in mind to tackle which invigorated me. It was enough to overcome the negatives.......this time. 

Next: Part 2

Saturday, September 04, 2021

Fixin' Up Ol' J.B.

My battered and well used Topeak Joe Blow floor pump.
 It was about 2007, I'd say. Most likely over Spring break when the kids were out of school. We took a family vacation to see the relatives in El Paso, Texas. That would have been back when I was in the thick of things with "Twentynine Inches", the 29"er website I wrote and reviewed product for back then. El Paso has mountains, by the way. Real mountains. So I jumped at the chance to take a couple of test sleds down to ride in Franklin Mountain State Park. I had all the requisite gear packed up for the trip, or so I thought. One crucial piece of equipment had been left behind. 

A floor pump.

So, I searched for some bike shops in the phone book, (remember those), since Amazon wasn't a thing back then. I found a recommended shop called "Crazy Cat Cyclery". I went in, and asked about getting a floor pump. All they really had were a couple of Topeak models. I ended up with a Joe Blow model. I think it was less than 30 bucks, as I recall. 'Good enough', I thought to myself, 'I'll likely never use it again once I get back home.'

Famous last words. 

Signs of years of use.

I not only used it again, but I used it again, and again, and again! It became the defacto "Guitar Ted Productions" gauge of air pressure and I used it probably six days a week on average. Sometimes multiple times per day. I used it on tubeless set ups, on my Presta valve wheels, (most of what I have), and on my utility bikes, which are mostly Schrader valved bikes. This went on and on until I reviewed a Silca floor pump in 2018 and then that pump pretty much took over the daily pumping routine. By this time, that ol' Joe Blow had some issues.

Mostly it wasn't staying on the valve after a few pumps. The rubber gasket was shot. I figured, ya know, since it was so old, and cheap, that there would be no replacement parts available. I related this feeling to a then co-worker of mine, who happened to be the buyer for that shop. He took it upon himself to check into things, and lo and behold! there were replacement parts available for that Joe Blow pump!

Old used up gasket on the left. New bits on the right.

 
The order was placed, and I received the parts, but for one reason or another, I just muddled along with ol' Joe. I'd hold the pump head on by hand, and anyway- this was just a shop pump now. Relegated to the dank darkness of the G-Ted Laboratories. (Trust me, it's dark AND dank down there!) The parts went into a drawer. I didn't even bother think about any of this until late one evening recently when Mrs. Guitar Ted insisted I find my COVID vaccination card, which I had misplaced. "Let's see, is it in THIS drawer?', I thought as I systematically removed things one by one from the drawer. 

New bits installed and another decade-plus of life injected.

 And then I came across the parts!

(By the way, I did find the vaccination card as well!) So, now I have revived ol' Joe Blow- finally - and he works good as new! A little worse for wear, but it's just cosmetic stuff anyway. Character lines! Signs of a well used life. And there will be many more days and years to come with it now. 

Fixin' Up Ol' J.B.

My battered and well used Topeak Joe Blow floor pump.
 It was about 2007, I'd say. Most likely over Spring break when the kids were out of school. We took a family vacation to see the relatives in El Paso, Texas. That would have been back when I was in the thick of things with "Twentynine Inches", the 29"er website I wrote and reviewed product for back then. El Paso has mountains, by the way. Real mountains. So I jumped at the chance to take a couple of test sleds down to ride in Franklin Mountain State Park. I had all the requisite gear packed up for the trip, or so I thought. One crucial piece of equipment had been left behind. 

A floor pump.

So, I searched for some bike shops in the phone book, (remember those), since Amazon wasn't a thing back then. I found a recommended shop called "Crazy Cat Cyclery". I went in, and asked about getting a floor pump. All they really had were a couple of Topeak models. I ended up with a Joe Blow model. I think it was less than 30 bucks, as I recall. 'Good enough', I thought to myself, 'I'll likely never use it again once I get back home.'

Famous last words. 

Signs of years of use.

I not only used it again, but I used it again, and again, and again! It became the defacto "Guitar Ted Productions" gauge of air pressure and I used it probably six days a week on average. Sometimes multiple times per day. I used it on tubeless set ups, on my Presta valve wheels, (most of what I have), and on my utility bikes, which are mostly Schrader valved bikes. This went on and on until I reviewed a Silca floor pump in 2018 and then that pump pretty much took over the daily pumping routine. By this time, that ol' Joe Blow had some issues.

Mostly it wasn't staying on the valve after a few pumps. The rubber gasket was shot. I figured, ya know, since it was so old, and cheap, that there would be no replacement parts available. I related this feeling to a then co-worker of mine, who happened to be the buyer for that shop. He took it upon himself to check into things, and lo and behold! there were replacement parts available for that Joe Blow pump!

Old used up gasket on the left. New bits on the right.

 
The order was placed, and I received the parts, but for one reason or another, I just muddled along with ol' Joe. I'd hold the pump head on by hand, and anyway- this was just a shop pump now. Relegated to the dank darkness of the G-Ted Laboratories. (Trust me, it's dark AND dank down there!) The parts went into a drawer. I didn't even bother think about any of this until late one evening recently when Mrs. Guitar Ted insisted I find my COVID vaccination card, which I had misplaced. "Let's see, is it in THIS drawer?', I thought as I systematically removed things one by one from the drawer. 

New bits installed and another decade-plus of life injected.

 And then I came across the parts!

(By the way, I did find the vaccination card as well!) So, now I have revived ol' Joe Blow- finally - and he works good as new! A little worse for wear, but it's just cosmetic stuff anyway. Character lines! Signs of a well used life. And there will be many more days and years to come with it now. 

Friday, September 03, 2021

Friday News And Views

Steve Potts teams up with Far East manufacturers to offer components
 New Steve Potts Designs & Branded Components:

Steve Potts is a name maybe that you've not heard of, but if you are into MTB or gravel travel, you should know this name. Steve Potts was one of the NorCal MTB pioneers who started out building custom frames and forks for the mountain bikers back in the very early 1980's. He then was one of the four founding partners in Wilderness Trail Bikes. Steve Potts continued to make custom frames under his own brand, but also did designs and frames for WTB up until around 1995-96 when he left WTB. 

Steve then continued making titanium and some steel custom frames and forks, developing the Type II fork into something that became somewhat of a cult favorite and his titanium frames are without peer. However; even with his son helping out, keeping on top of fork production was difficult. To help get more forks under more folks, Steve Potts has come into a partnership with some Far East companies in Japan and Taiwan to bring not only Type II forks in, but new hubs, and more things in the future, like tires made by Panaracer. See this story for more details. 

Comments: Steve Potts designs some pretty cool stuff, and that Type II fork is highly regarded. Expectations for the hubs and whatever else comes forth from this are high. The hubs, reportedly made by Suzue, should be quite nice with interchangeable hub caps for 12mm through or QR, Campy, SRAM XD, or Shimano free hubs, and in black or a highly polished silver anodization. 

Also interesting: This component line with a future tire and maybe more is very reminiscent of 80's/90's era WTB catalog stuff. What comes around goes around? Maybe. Whatever the case, this is something to keep an eye on, because if the high standards held by Steve Potts hold up through the imported line of components, then these items will be highly sought after by those in the know.    

Trek's new redesigned Checkpoint
Trek Releases News On Redesigned Checkpoint Models:

Last week news broke on Trek's new Checkpoint model which has been redesigned from the ground up. While at first glance it may look similar to the outgoing model, there are some significant differences here.

Gone is the Trek seat mast which was a carryover idea from the Madone/Domane and had it's problems. The new Checkpoint looks to be using a much more sensible 27.2mm post size. You'll note also that the head tube is completely different. It would appear that the head tube lengths have been slightly increased per size compered to the outgoing Checkpoint's. The front-center has also been extended in the theme of many newer gravel bikes. This results in rider's needing shorter stems than with older geometry. Trek also claims that the head tube is slightly slacker, but at this time I have no geometry chart to share. 

I would suspect also that there will be a price increase over the older Checkpoint which topped out at less than 7K for the range topping model. Obviously lesser spec'ed models will come in for less money. I would also assume that the aluminum Checkpoint will also receive similar updates, but as of now, Trek hasn't revealed anything to that effect. By the way, it should also be mentioned that there are a whole set of bikepacking bags with the Bontrager branding that go with this new Checkpoint- top tube bags, tank bags, handle bar and seat bags. 

Comments; Trek's Checkpoint is a well designed gravel bike and this updated Checkpoint should appeal to a large number of riders. The ISO Speed rear is somewhat of an Achilles's heel, as it can be problematic in use, but it is a valid idea on rider comfort. If Trek has worked out some of the gremlins in their design, I would not hesitate to ride one of these.

Cannondale's new Super Six Evo SE

Cannondale Releases Info On The New Super Six Evo SE:

Another new gravel bike, this time an aero gravel bike, from Cannondale. This is not a Topstone, but an evolution of the Super Six model. basically a Super Six with 45mm maximum tire clearances. 

Comments: It is carbon, of course, so it is expensive. It also is prone to damage from mud and grit, like all carbon frames for gravel made without any nod to chain stay and fork protection where mud and grass and what have you can grind out a carbon frame in a heartbeat. To be completely fair, hardly any company gets this. But it is a real issue and it happens fairly often. 

That and since Cannondale is using the exact same frame for its flagship cross bike, the bottom bracket drop pretty much is old cross style at 68mm. That's not modern gravel geometry at all. (See the Checkpoint above) Essentially, this is a cross bike foisted off as a gravel bike. Companies did a LOT of this in the mid-teens of this century because gravel as a category was taking off and many companies thought that they could simply pass off CX geo and be a part of the money-grab. Nope! And now Cannondale tries a ten year old trick? Not happening. Love the 71° head angle, but a quick look at the top tube lengths, wheel base, and the level-ish top tube, (great for CX bike shouldering), and it is easy to see which discipline this bike is really for.  

 Trans Iowa- Gravel Grinding History- In The News Again:
 
A few weeks ago now I was interviewed by a young woman over the phone from the AXIOS Des Moines news site. I was asked about the history of gravel cycling and how it has gotten so big. Someone tipped her off and told her I might have had something to do with it all. 

So, I answered her questions as best that I could, and then I subscribed to the AXIOS Des Moines feed to see if, and when, this might pop up. It has taken a while, but author Linh Ta has posted her write up and you can read it here on AXIOS. (It's free, I believe, to check out) 

I always find it interesting to see how people interpret the story about Trans Iowa and how it started the ball rolling with gravel events and eventually, the entire gravel scene. As with most of these interviews, there are details that get translated incorrectly, but the gist of it all is very spot on. It isn't that I am not grateful- on the contrary - I am very grateful for the interview. I mean, who would have thought that three years after the last Trans Iowa that any media person would ever care about it at all? I wouldn't have suspected it. 

Thanks to AXIOS and Linh Ta for the opportunity to share the Trans Iowa story with a wider audience! 

That's a wrap for this week! have a great weekend - It's LABOR DAY weekend in the USA, so stay safe!

Friday News And Views

Steve Potts teams up with Far East manufacturers to offer components
 New Steve Potts Designs & Branded Components:

Steve Potts is a name maybe that you've not heard of, but if you are into MTB or gravel travel, you should know this name. Steve Potts was one of the NorCal MTB pioneers who started out building custom frames and forks for the mountain bikers back in the very early 1980's. He then was one of the four founding partners in Wilderness Trail Bikes. Steve Potts continued to make custom frames under his own brand, but also did designs and frames for WTB up until around 1995-96 when he left WTB. 

Steve then continued making titanium and some steel custom frames and forks, developing the Type II fork into something that became somewhat of a cult favorite and his titanium frames are without peer. However; even with his son helping out, keeping on top of fork production was difficult. To help get more forks under more folks, Steve Potts has come into a partnership with some Far East companies in Japan and Taiwan to bring not only Type II forks in, but new hubs, and more things in the future, like tires made by Panaracer. See this story for more details. 

Comments: Steve Potts designs some pretty cool stuff, and that Type II fork is highly regarded. Expectations for the hubs and whatever else comes forth from this are high. The hubs, reportedly made by Suzue, should be quite nice with interchangeable hub caps for 12mm through or QR, Campy, SRAM XD, or Shimano free hubs, and in black or a highly polished silver anodization. 

Also interesting: This component line with a future tire and maybe more is very reminiscent of 80's/90's era WTB catalog stuff. What comes around goes around? Maybe. Whatever the case, this is something to keep an eye on, because if the high standards held by Steve Potts hold up through the imported line of components, then these items will be highly sought after by those in the know.    

Trek's new redesigned Checkpoint
Trek Releases News On Redesigned Checkpoint Models:

Last week news broke on Trek's new Checkpoint model which has been redesigned from the ground up. While at first glance it may look similar to the outgoing model, there are some significant differences here.

Gone is the Trek seat mast which was a carryover idea from the Madone/Domane and had it's problems. The new Checkpoint looks to be using a much more sensible 27.2mm post size. You'll note also that the head tube is completely different. It would appear that the head tube lengths have been slightly increased per size compered to the outgoing Checkpoint's. The front-center has also been extended in the theme of many newer gravel bikes. This results in rider's needing shorter stems than with older geometry. Trek also claims that the head tube is slightly slacker, but at this time I have no geometry chart to share. 

I would suspect also that there will be a price increase over the older Checkpoint which topped out at less than 7K for the range topping model. Obviously lesser spec'ed models will come in for less money. I would also assume that the aluminum Checkpoint will also receive similar updates, but as of now, Trek hasn't revealed anything to that effect. By the way, it should also be mentioned that there are a whole set of bikepacking bags with the Bontrager branding that go with this new Checkpoint- top tube bags, tank bags, handle bar and seat bags. 

Comments; Trek's Checkpoint is a well designed gravel bike and this updated Checkpoint should appeal to a large number of riders. The ISO Speed rear is somewhat of an Achilles's heel, as it can be problematic in use, but it is a valid idea on rider comfort. If Trek has worked out some of the gremlins in their design, I would not hesitate to ride one of these.

Cannondale's new Super Six Evo SE

Cannondale Releases Info On The New Super Six Evo SE:

Another new gravel bike, this time an aero gravel bike, from Cannondale. This is not a Topstone, but an evolution of the Super Six model. basically a Super Six with 45mm maximum tire clearances. 

Comments: It is carbon, of course, so it is expensive. It also is prone to damage from mud and grit, like all carbon frames for gravel made without any nod to chain stay and fork protection where mud and grass and what have you can grind out a carbon frame in a heartbeat. To be completely fair, hardly any company gets this. But it is a real issue and it happens fairly often. 

That and since Cannondale is using the exact same frame for its flagship cross bike, the bottom bracket drop pretty much is old cross style at 68mm. That's not modern gravel geometry at all. (See the Checkpoint above) Essentially, this is a cross bike foisted off as a gravel bike. Companies did a LOT of this in the mid-teens of this century because gravel as a category was taking off and many companies thought that they could simply pass off CX geo and be a part of the money-grab. Nope! And now Cannondale tries a ten year old trick? Not happening. Love the 71° head angle, but a quick look at the top tube lengths, wheel base, and the level-ish top tube, (great for CX bike shouldering), and it is easy to see which discipline this bike is really for.  

 Trans Iowa- Gravel Grinding History- In The News Again:
 
A few weeks ago now I was interviewed by a young woman over the phone from the AXIOS Des Moines news site. I was asked about the history of gravel cycling and how it has gotten so big. Someone tipped her off and told her I might have had something to do with it all. 

So, I answered her questions as best that I could, and then I subscribed to the AXIOS Des Moines feed to see if, and when, this might pop up. It has taken a while, but author Linh Ta has posted her write up and you can read it here on AXIOS. (It's free, I believe, to check out) 

I always find it interesting to see how people interpret the story about Trans Iowa and how it started the ball rolling with gravel events and eventually, the entire gravel scene. As with most of these interviews, there are details that get translated incorrectly, but the gist of it all is very spot on. It isn't that I am not grateful- on the contrary - I am very grateful for the interview. I mean, who would have thought that three years after the last Trans Iowa that any media person would ever care about it at all? I wouldn't have suspected it. 

Thanks to AXIOS and Linh Ta for the opportunity to share the Trans Iowa story with a wider audience! 

That's a wrap for this week! have a great weekend - It's LABOR DAY weekend in the USA, so stay safe!

Thursday, September 02, 2021

Shimano Goes To 12

On Tuesday Shimano unloaded the news on the cycling world that they were coming with all electronic 12 speed, semi-wireless road groups. They showcased the new Dura-Ace and Ultegra groups simultaneously, something that the big component company had not ever done before. Typically we had to wait another year after a Dura-Ace group was revealed to see the Ultegra version. Also, Shimano introduced a new Ultegra carbon wheel set, another unprecedented move on their part.

So what? Roadie, blah-blah-blah! All I care about is gravel travel anymore, right? Well, it is no secret that gravel componentry is highly derived from road bike ideas, and so this move by Shimano bears - in my opinion - more scrutiny. 

And scrutiny and speculation is what I gave it here on Riding Gravel. You can go read my thoughts about the whiz-bang, electronical wizardry over there. I will only speak to more of my personal take on things here in this post.

I will say up front that I am much more inclined to be a Shimano user than I would be a SRAM user on gravel. Shimano GRX just makes more sense to me, looks far better, and it plain works. SRAM works as well, but in my opinion it is clunky, slower, and SRAM is not known for their brakes, which I loathe as a mechanic. Plus they use DOT brake fluid. Yuck! I haven't been very fond of that stuff since my days of doing brakes on cars. 

Anyway.....

My take on the new stuff and 12 speed: I like that Shimano adds a gear not to increase the gearing range. This is all about efficiency for the rider and smaller increments between gears in the cassette are easier on the rider. This is in direct opposition to most of what SRAM markets in terms of gearing. SRAM is all about percent of range. Big deal! That huge four (and sometimes more) tooth jump in between the lower gears is not my cup of tea. Shimano packs in another gear to lessen jumps between gears. That's smarter for the rider. 

Shimano still believes in 2X and front derailleurs. Look.....bike riding is a skill. It requires one to think. If that is too bothersome, than 1X is all about you. Go for that. But when you set up a good 2X crank set gearing with a close ratio cassette, the result in performance and feel is unrivaled. 

NOTE: It must also be stated that SRAM probably doesn't want to develop a new front derailleur because Shimano has all the good ideas for that locked up under patents. So, I give SRAM a bit of a hall pass in light of that.

There is only one thing here that bugs me. Triple crank sets seem to have gone the way of the dinosaur. To make up for that, Shimano- and others - have a huge differential between crank ring sizes. On GRX it can be a 17T difference between the big ring and the inner ring. Egads! Talk about 'cadence shock'. You find yourself backing off or going forward on the cassette three gears every time you shift the front? No wonder people hate 2X! 

I personally love my CX non-series Shimano 11 speed crank set on my Black Mountain Cycles MCD. It is the 'traditional' 46/36 crank set gearing. It's perfect. You are in the big ring, let's say, and you hit a hill. Down shift once, twice on the cassette. The next shift is the front ring- down to the 36. It's perfect every time. Coming back down a hill, same thing, or very often I just pop into the big ring right away and start shifting the rear end accordingly. But what if I had that 17T differential up front? I'd be all over the place shifting both sides. 

And that is why I may never buy a GRX crank set. Not unless they tighten up that differential between the rings. And you are probably sitting there thinking- "Well, that's what 1X is for!", and I get why you think that. But the fact remains that 1X encourages terribly inefficient chain lines to accommodate a wide gear range which you do have with 2X, but only with this ridiculous chain ring differential which came about because of the fact that triples are dead. See? The lack of a triple crank has led us down this crazy road to ruin. 

1X has its place, for sure. Fat bikes, MTB's where full suspension designs supplant where a front derailleur could be mounted are a couple of good reasons for 1X. But where efficiency for the rider is paramount, (read- most cycling), the front derailleur is a critical piece of that drive train which can render the best results. Keep the chain as straight as possible! That's the goal. And SRAM doesn't seem all that interested- or capable for whatever reasons (See above) - to bring front derailleur shifting to gravel. 

Brakes.... uggh. I hate talking about SRAM brakes because of their years of 'fail' in terms of consistency and innovations. Shimano, on the other hand, is responsible for tangible advancements in braking technology. They are responsible for IceTech, Center Lock mounted rotors, brakes with bleeding procedures that aren't overly complicated, and now with the newest Dura-Ace and Ultegra, a new pad-to-rotor distance and lever throw that should promote quieter, drag-free brakes and more modulation with excellent power. SRAM is definitely off the back in terms of brakes for drop bars. 

So, I feel that there is a lot to look forward to with the new Dura-Ace/Ultegra advancements. Sure- Shimano could still screw things up with certain details. But we will have to wait and see what a new generation of GRX might be like. I'll be honest- if the new GRX is electronic only, that would be a big disappointment. Not that Di2 is bad, not at all, but it is very expensive. It is the cost I would regret to see, not how it works. Shimano is capable of outstanding performance from a mechanically shifted drive train, and I sure hope that they keep something mechanical for the gravel set when a new GRX comes out that will help keep costs down. 

With all of the disruptions caused by COVID and other influences on the market being negative, who knows when we could see a new GRX. It might be a few years, but I sure hope that is not the case. GRX came out in 2019, and by 2024, it would be pretty long in the tooth. I predict we will see something in a year, maybe less. But that is just a guess. 

Note: All images courtesy of Shimano North America.

Shimano Goes To 12

On Tuesday Shimano unloaded the news on the cycling world that they were coming with all electronic 12 speed, semi-wireless road groups. They showcased the new Dura-Ace and Ultegra groups simultaneously, something that the big component company had not ever done before. Typically we had to wait another year after a Dura-Ace group was revealed to see the Ultegra version. Also, Shimano introduced a new Ultegra carbon wheel set, another unprecedented move on their part.

So what? Roadie, blah-blah-blah! All I care about is gravel travel anymore, right? Well, it is no secret that gravel componentry is highly derived from road bike ideas, and so this move by Shimano bears - in my opinion - more scrutiny. 

And scrutiny and speculation is what I gave it here on Riding Gravel. You can go read my thoughts about the whiz-bang, electronical wizardry over there. I will only speak to more of my personal take on things here in this post.

I will say up front that I am much more inclined to be a Shimano user than I would be a SRAM user on gravel. Shimano GRX just makes more sense to me, looks far better, and it plain works. SRAM works as well, but in my opinion it is clunky, slower, and SRAM is not known for their brakes, which I loathe as a mechanic. Plus they use DOT brake fluid. Yuck! I haven't been very fond of that stuff since my days of doing brakes on cars. 

Anyway.....

My take on the new stuff and 12 speed: I like that Shimano adds a gear not to increase the gearing range. This is all about efficiency for the rider and smaller increments between gears in the cassette are easier on the rider. This is in direct opposition to most of what SRAM markets in terms of gearing. SRAM is all about percent of range. Big deal! That huge four (and sometimes more) tooth jump in between the lower gears is not my cup of tea. Shimano packs in another gear to lessen jumps between gears. That's smarter for the rider. 

Shimano still believes in 2X and front derailleurs. Look.....bike riding is a skill. It requires one to think. If that is too bothersome, than 1X is all about you. Go for that. But when you set up a good 2X crank set gearing with a close ratio cassette, the result in performance and feel is unrivaled. 

NOTE: It must also be stated that SRAM probably doesn't want to develop a new front derailleur because Shimano has all the good ideas for that locked up under patents. So, I give SRAM a bit of a hall pass in light of that.

There is only one thing here that bugs me. Triple crank sets seem to have gone the way of the dinosaur. To make up for that, Shimano- and others - have a huge differential between crank ring sizes. On GRX it can be a 17T difference between the big ring and the inner ring. Egads! Talk about 'cadence shock'. You find yourself backing off or going forward on the cassette three gears every time you shift the front? No wonder people hate 2X! 

I personally love my CX non-series Shimano 11 speed crank set on my Black Mountain Cycles MCD. It is the 'traditional' 46/36 crank set gearing. It's perfect. You are in the big ring, let's say, and you hit a hill. Down shift once, twice on the cassette. The next shift is the front ring- down to the 36. It's perfect every time. Coming back down a hill, same thing, or very often I just pop into the big ring right away and start shifting the rear end accordingly. But what if I had that 17T differential up front? I'd be all over the place shifting both sides. 

And that is why I may never buy a GRX crank set. Not unless they tighten up that differential between the rings. And you are probably sitting there thinking- "Well, that's what 1X is for!", and I get why you think that. But the fact remains that 1X encourages terribly inefficient chain lines to accommodate a wide gear range which you do have with 2X, but only with this ridiculous chain ring differential which came about because of the fact that triples are dead. See? The lack of a triple crank has led us down this crazy road to ruin. 

1X has its place, for sure. Fat bikes, MTB's where full suspension designs supplant where a front derailleur could be mounted are a couple of good reasons for 1X. But where efficiency for the rider is paramount, (read- most cycling), the front derailleur is a critical piece of that drive train which can render the best results. Keep the chain as straight as possible! That's the goal. And SRAM doesn't seem all that interested- or capable for whatever reasons (See above) - to bring front derailleur shifting to gravel. 

Brakes.... uggh. I hate talking about SRAM brakes because of their years of 'fail' in terms of consistency and innovations. Shimano, on the other hand, is responsible for tangible advancements in braking technology. They are responsible for IceTech, Center Lock mounted rotors, brakes with bleeding procedures that aren't overly complicated, and now with the newest Dura-Ace and Ultegra, a new pad-to-rotor distance and lever throw that should promote quieter, drag-free brakes and more modulation with excellent power. SRAM is definitely off the back in terms of brakes for drop bars. 

So, I feel that there is a lot to look forward to with the new Dura-Ace/Ultegra advancements. Sure- Shimano could still screw things up with certain details. But we will have to wait and see what a new generation of GRX might be like. I'll be honest- if the new GRX is electronic only, that would be a big disappointment. Not that Di2 is bad, not at all, but it is very expensive. It is the cost I would regret to see, not how it works. Shimano is capable of outstanding performance from a mechanically shifted drive train, and I sure hope that they keep something mechanical for the gravel set when a new GRX comes out that will help keep costs down. 

With all of the disruptions caused by COVID and other influences on the market being negative, who knows when we could see a new GRX. It might be a few years, but I sure hope that is not the case. GRX came out in 2019, and by 2024, it would be pretty long in the tooth. I predict we will see something in a year, maybe less. But that is just a guess. 

Note: All images courtesy of Shimano North America.

Wednesday, September 01, 2021

A Note On The Trans Iowa Series And The Future

 As many of you know, the "Trans Iowa Stories" series has been getting posted every Sunday for a couple of years running now. You also may be aware that at the onset this was all being done with the hope being that there would be some kind of book coming out of the series. Something the Trans Iowa fan or participant could have as a memory and keepsake. Maybe even curious gravel fans would want to look in on it as well.

All along I have been trying to illuminate things about Trans Iowa and my putting it on that were things that no one was aware of, or that very few were aware of. While the historical aspects of many of the Trans Iowas were written and are available here and elsewhere, there are other stories to be shared.

I found this out over the weekend before last. A chance meeting of John and Celeste Mathias at the start line of Gravel Worlds led to me telling them about the Trans Iowa stories series. They actually started checking it out on their way back home from Lincoln, Nebraska. Then a day or so later John relayed a couple of awesome stories about T.I.v10 that I had never heard before. This got me to thinking. 

I had really no rudder to steer me in terms of the Trans Iowa book to come. I knew I wanted to produce one, but I've bloviated on and on about everything I possibly could here already. What more could I do?  Maybe edit things down to the best of the best, throw some images at it, and send that out there into the world? But after reading John's email, I was seriously inspired. I finally saw a direction for this project, and what is more, tentacles of other projects branching off of that. I got excited about this 'book' idea for the first time, if I am honest, after John's email to me. 

So, there are a lot of details and things to be considered before I can lay it all on you folks, but here is where I am at with this Trans Iowa thing now. Instead of most of this book being from my perspective, I now know I need the participant's perspectives as well. THAT is what is going to make this thing really juicy and interesting. That is what will propel this idea forward to possibly becoming really good, instead of- ya know, a simple retelling of stories from Guitar Ted. 

I am now running with the title "Trans Iowa's Book of Tales" since I plan on making this about as many folks that were in the event as I can. The "how" of that is what I need to work on. There also are other plans to let folks in to see and hear that weren't any part of the event, but would like to know what is up, and hopefully those avenues I provide for sneak peeks will raise even more stoke. But for now, I simply need material from those who were a big part of the event in the past. 

An email and a few images (if you have any) are awesome. If you are not comfortable with writing, I can record a conversation for later transcribing to words. But at any rate, if you or someone you know has anything to share, here is how to do it.

Contact me @g.ted.prductions@gmail.com and we can just discuss ideas, or if you have a tale to share, fire away. But this idea ultimately will only be successful if those with 'the goods" decide to share. 

More (hopefully) soon........

A Note On The Trans Iowa Series And The Future

 As many of you know, the "Trans Iowa Stories" series has been getting posted every Sunday for a couple of years running now. You also may be aware that at the onset this was all being done with the hope being that there would be some kind of book coming out of the series. Something the Trans Iowa fan or participant could have as a memory and keepsake. Maybe even curious gravel fans would want to look in on it as well.

All along I have been trying to illuminate things about Trans Iowa and my putting it on that were things that no one was aware of, or that very few were aware of. While the historical aspects of many of the Trans Iowas were written and are available here and elsewhere, there are other stories to be shared.

I found this out over the weekend before last. A chance meeting of John and Celeste Mathias at the start line of Gravel Worlds led to me telling them about the Trans Iowa stories series. They actually started checking it out on their way back home from Lincoln, Nebraska. Then a day or so later John relayed a couple of awesome stories about T.I.v10 that I had never heard before. This got me to thinking. 

I had really no rudder to steer me in terms of the Trans Iowa book to come. I knew I wanted to produce one, but I've bloviated on and on about everything I possibly could here already. What more could I do?  Maybe edit things down to the best of the best, throw some images at it, and send that out there into the world? But after reading John's email, I was seriously inspired. I finally saw a direction for this project, and what is more, tentacles of other projects branching off of that. I got excited about this 'book' idea for the first time, if I am honest, after John's email to me. 

So, there are a lot of details and things to be considered before I can lay it all on you folks, but here is where I am at with this Trans Iowa thing now. Instead of most of this book being from my perspective, I now know I need the participant's perspectives as well. THAT is what is going to make this thing really juicy and interesting. That is what will propel this idea forward to possibly becoming really good, instead of- ya know, a simple retelling of stories from Guitar Ted. 

I am now running with the title "Trans Iowa's Book of Tales" since I plan on making this about as many folks that were in the event as I can. The "how" of that is what I need to work on. There also are other plans to let folks in to see and hear that weren't any part of the event, but would like to know what is up, and hopefully those avenues I provide for sneak peeks will raise even more stoke. But for now, I simply need material from those who were a big part of the event in the past. 

An email and a few images (if you have any) are awesome. If you are not comfortable with writing, I can record a conversation for later transcribing to words. But at any rate, if you or someone you know has anything to share, here is how to do it.

Contact me @g.ted.prductions@gmail.com and we can just discuss ideas, or if you have a tale to share, fire away. But this idea ultimately will only be successful if those with 'the goods" decide to share. 

More (hopefully) soon........