Friday, December 03, 2021

Friday News And Views

The Cotic eMTB prototype. (Image courtesy of Cotic social media)
One Example Of The "New Normal":

As time with this pandemic eases on it has become increasingly apparent that we are in an era, (however short or long it ends up being), of delays, shortages, and long lead times as a result. 

Case in point: Cotic, the UK based MTB brand, has announced that they are working on a motorized MTB rig. You can read all about the finer details here. That post on the Cotic site is a pretty good representation of what it takes for smaller brands to get things done during this 'new era' we find ourselves in.

Comments: So, if you place orders now you 'might' see product by the end of 2023? Did I get that right? Wow! Obviously larger brands will command better terms, but this is not a good sign for the consumer. That would indicate that this coming year will be a lot like the last two years- stuff will be hard to get. As I've said in the past, it wouldn't be a bad idea for consumers to stock up on spares: Chains, cassettes, brake pads, etc, whenever you see what you need in stock. Then you'll have it when you actually need it, instead of scrambling at the last minute to source parts.  

Just A Friendly Reminder:

This is the month of retrospect here on "Guitar Ted Productions". No doubt you've already noted some posts with that theme. Expect much of the same throughout the month of December.

I'll have limited space for 'regular posting' due to the volume of stuff I am working through, so if you are here jonesing for 'current events' then this month will have slim pickings. I'll return to a more familiar schedule here in January, which isn't all that far away! Stay tuned!

In the meantime, I'll point out that many days this month will have double postings. Two posts in one day- so to ensure you don't miss anything, scroll down the page, or consult the right column (on desk top versions of this blog) where my current posts for the month are listed individually. I'll double post if anything exciting or newsworthy (or both) comes up, so don't worry about missing anything in that regard due to my schedule of posts being so intense this month. 

By the way, I have four "Virtual Turkey Burn" reports to share starting with N.Y. Roll's submission tomorrow, which will be followed by the other three in a shot-gun style. So look for all four tomorrow. 

And the 'regularly scheduled posts', like the "FN&V" you are reading now, will still appear. Okay, that's enough about that! Thanks again for your patronage here and for your patience with me this month.

Mason Cycles Debuts New "RAW" MTB frame:

You just don't see many steel hardtail MTB debuts anymore, unless you count UK MTB purveyors. For whatever reason, the UK has never really abandoned steel MTB bikes. 

Mason Cycles just announced a new offering which seems pretty interesting as it is aimed at bikepacking/MTB all-around use, not just for DH/Enduro or go-fast XC-ing, which many times is the case with a hard tail offering from a US based designer. 

The RAW can take up to a 2.6" 29"er tire with a max 34T big ring. That's pretty good there, I think. Then you have the 66° head angle and short-ish chain stays. I've had my say on that here before and I seem to be outnumbered when it comes to that opinion, but I still think we're seeing the outer fringes of slack head angle design and at some point we're going to find a 'pulling back' on those numbers. Closer to 70° but not quite that, in the future. 

We'll see... 

So this is a pretty cool bike. The "Signal Yellow" paint is somewhat reminiscent of the "Fun Guy Green" Fargo coloration, but more yellow. I kind of like that as well. The frame comes with a Rock Shox SID Ultimate fork, so's expensive. But what isn't these days compared to just a few years ago? Not that it matters to me, but if I were to get a MTB, this one would be high on the list.   

Recycling Rubber:

Getting rid of old, unwanted tires has been a plague on me since this whole reviewing process started up. What to do? The entire life cycle of tires has always really bothered me from an environmental aspect. There just was no really good options for recycling them at all. 

Well, now things may be changing in regard to this as I see an article on "Pink Bike" here that indicates Schwalbe, the German based tire manufacturer, is working to bring tire recycling for bicycle tires to reality. 

Now how far this gets is anyone's guess, but it is a start. It would be nice to see a program where anywhere that sells tires (for anything) has to recycle them if they are dropped off to them, or something similar. I know we used to have a service come pick up used car tires once a month when I worked on automobiles. Yes- it would be a hassle for retailers, but it would be much better than filling our land fills with tires, or even worse, burning them, which is still done as well. 

That's a wrap for this week. Have a great weekend and get outside!

1 comment:

NY Roll said...

Working and Volunteering with the bike collective in town, I would be really interested in the rubber recycling program. I have stacks of tubes and tires I need to toss. But I would rather repurpose them. So I will try and stay abreast on this topic.